Back to search

West Virginia University

Enhancing the Thermoelectric Performance of Calcium Cobaltite through Cation Substitution and Non-Stoichiometric Addition

Abstract

dc:description.abstract

Thermoelectric (TE) materials have the unique ability to convert temperature differences directly into electricity due to the Seebeck effect. Thermoelectric generators have a variety of applications including waste heat recovery for power plants and automotives. For high-temperature waste-heat recovery, misfit layered calcium cobaltite, Ca3Co4O9, is one of the most promising p-type TE oxides offering good durability in air with low cost and minimized environmental impact. A challenge for developing polycrystalline calcium cobaltite TE materials is to improve its energy conversion efficiency for large scale applications. The energy conversion efficiency of TE materials is characterized using the figure-of-merit ZT, which is defined as ZT = S2rho -1K-1T, where S, rho, S 2rho-1, K-1, and T are Seebeck coefficient, electrical resistivity, power factor, thermal conductivity, and temperature respectively. State of the art commercial conventional TE materials, such as bismuth telluride (Bi2Te3) and lead telluride (PbTe), possess values of ZT ≈ 1, which corresponds to an energy conversion efficiency of 10%. Calcium cobaltite single crystals show extraordinary TE performance with an extrapolated ZT value of 0.87 at 973 K.4 By contrast, the TE performance of polycrystals is reported to be only ~20% of that from the single crystal and with the commonly measured ZT of ~0.2 at ~900 K. This dissertation focuses on improving the performance of polycrystalline Ca3Co4O9 ceramics for large scale applications. The present work demonstrates the feasibility of increasing the values of Seebeck coefficient, S and power factor of calcium cobaltite Ca3Co4O9 ceramics through dopant grain boundary (GB) segregation. For the first time in the field of thermoelectrics, various dopants which include Bi, Ba, and co-dopants Bi-Ba were proved to segregate to the GBs and dramatically increased the ZT of Ca3Co4O9, and a high ZT of 0.52 was achieved for Ca3Co4O9 ceramics through dopants grain boundary segregation. The method of introducing the dopants to the grain boundaries, and their origin of the performance enhancement of thermoelectric oxide ceramics were thoroughly investigated and presented in this dissertation.

Degree

thesis:*
Name thesis:degree_name
PhD
Level thesis:degree_level
Dissertation
Discipline thesis:degree_discipline
Mechanical and Aerospace Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Boyle, Cullen
Contributors dc:contributor
  • Xueyan Song
  • Yun Chen
  • Bruce Kang
  • Hailin Li
  • Dustin McIntyre
  • Jacky Prucz

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Boyle, Cullen. Enhancing the Thermoelectric Performance of Calcium Cobaltite through Cation Substitution and Non-Stoichiometric Addition. Dissertation thesis, https://doi.org/10.33915/etd.5247