Back to search

West Virginia University

Analysis, Design and Rehabilitation of Structural Members with Timber and FRP

Abstract

dc:description.abstract

Bridges have been an integral feature of the mountainous West Virginia landscape, carrying roads railways, and pedestrian traffic over creeks and rivers from early 1860. The state of West Virginia has always been a home for well reputed timber bridges in the last two centuries including several pedestrian bridges. This research focuses on designing a covered pedestrian bridge by using a combination of traditional and advanced materials such as timber, steel, and FRP for a length of 104.0' over three spans. Following the design process, structurally feasible and an economical choice of deck and stringer sections will be selected. This research also evaluates the effectiveness of using carbon fiber and glass fiber reinforced polymers to reinforce the timber beams/stringers and piles used for bridge structural elements. Specimens representing an FRP bridge deck (48.0"x10.25"x3.5") and glued timber stringers (4"x10"x12' and 4"x12"x16') are tested under four-point bending. For timber elements, feasibility of using circular timber pile sections strengthened with FRP wraps are also investigated. Experimental results of decks, stringers, and pile elements are compared with theoretical and FE values and a good correlation is observed.

Degree

thesis:*
Name thesis:degree_name
MS
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Civil and Environmental Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Gadi Reddy, Venkat Dheeraj
Contributors dc:contributor
  • P V Vijay
  • Omar I Abdul-Aziz
  • David B DeVallance
  • Hema J Siriwardane

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Gadi Reddy, Venkat Dheeraj. Analysis, Design and Rehabilitation of Structural Members with Timber and FRP. Thesis thesis, https://doi.org/10.33915/etd.5637