Back to search

West Virginia University

Dynamic Model and Estimator Development for a Smart Refractory Brick with Embedded Wireless Sensors for Gasifier Applications

Abstract

dc:description.abstract

The operating temperature is one of the most important variables for gasifier operation. A higher temperature can shorten the service life of the refractory lining. A lower temperature can reduce the extent of carbon conversion and disrupt the flow of molten slag in a slagging gasifier. Therefore temperature is one of the most important variable in a gasifier. In slagging gasifiers, molten slag can penetrate into the refractory lining leading to refractory spallation, undesired downtime, and costly replacement. Even though the temperature and extent of slag penetration are extremely important for the gasifier operation, they cannot be measured reliably by current measurement techniques. With this motivation, a novel ‘smart’ refractory brick is developed where various types of sensors are embedded in it. Although the ‘smart’ brick technology is promising, several issues needed to be addressed before it can be commercialized. First, a significant temperature drop is expected along the sensor length. Therefore, the traditional correlation-based approaches used for converting the raw measurements from a sensor to the variable of interest cannot be used. Second, thermal and electrical properties of the refractory do change in course of gasifier operation as the flowing molten slag penetrates into the refractory lining. The response of the embedded sensors can change due to changes in the temperature, and/or extent of slag penetration. Therefore, it becomes difficult to estimate the variables of interest by using the raw measurements. Third, if a model-based approach is used to estimate the temperature and extent of slag penetration, then model inaccuracy and measurement noise must be accounted for. Fourth, it is desired that the measurements collected from the embedded sensors are sent by using a wireless transmitter. Measurements from wireless sensor networks can be out-of-sequence leading to poor estimation. In order to address above issues, first-principles, dynamic model of the ‘smart’ brick has been developed. Sensor models are developed with consideration of installation direction. These models are further used in Kalman filter-based estimation framework to estimate the temperature and extent of slag penetration. Out-of-sequence measurement problem is also addressed. Finally, the optimal sensor placement for this ‘smart’ brick system is obtained by maximizing the state estimation accuracy

Degree

thesis:*
Name thesis:degree_name
PhD
Level thesis:degree_level
Dissertation
Discipline thesis:degree_discipline
Chemical and Biomedical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Huang, Qiao
Contributors dc:contributor
  • Debangsu Bhattacharyya
  • Richard Turton
  • Charter D. Stinespring
  • Stephen E. Zitney
  • Edward M. Sabolsky

Subjects

dc:subject × 8

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Huang, Qiao. Dynamic Model and Estimator Development for a Smart Refractory Brick with Embedded Wireless Sensors for Gasifier Applications. Dissertation thesis, https://doi.org/10.33915/etd.5831