West Virginia University
Design, Fabrication, and Testing of a Multi-Cycle Pulse Detonation Engine
Abstract
dc:description.abstractWith the constant drive to improve the efficiency of systems used to generate heat and work pulse detonation engines have been explored. Pulse detonation engines can be described by the Humphrey thermodynamic cycle which, in theory, has advantages over the Brayton, Otto, and Diesel cycles.;This work is concerned with the design, fabrication, and the initial tests of a pulse detonation laboratory test bed. The test bed was designed with modularity and ease of alteration in mind while ensuring that a wide range of detonable fuel and oxidizer mixtures where able to be utilized.;Initial testing with a methane and oxygen mixture showed repeatable detonations in both single shot and cyclic operating modes. The expected detonation velocity was 2390m/s. Detonation was monitored with ionization probes and detonation velocities of 2391m/s were found as close as 30" from ignition source and some form of detonation as close as 6" from the ignition source.
Degree
thesis:*- Name thesis:degree_name
- MS
- Level thesis:degree_level
- Thesis
- Discipline thesis:degree_discipline
- Industrial and Managements Systems Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Thorpe, Eli M.
- Contributors dc:contributor
-
- Patrick H Browning
- Andrew C Nix
- Akkerman V'yacheslav
Identifiers
dc:identifier.*- Identifier
- https://researchrepository.wvu.edu/etd/6805