Back to search

West Virginia University

Processing, Stability and High-Temperature Properties of Transition Metal Silicide-Refractory Oxide Composites for Electrical Applications

Abstract

dc:description.abstract

Many common electrical materials used in the current sensing applications suffer from structural and functional issues related to high operating temperatures (750°-1600°C), alternating reducing/oxidizing atmospheres, high pressures and corrosive environments. Therefore, there is a need for development of new materials, which are capable to operate under high-temperature and harsh-environments to provide real-time, accurate sensing during industrial processes such as coal gasification and power generation. In this study, electroconductive ceramic composites were fabricated by incorporating the 20-90 vol% of transition metal silicides (MoSi2, WSi2, NbSi2, TaSi 2, CrSi2) within refractory oxides (Al2O 3, ZrO2, Cr2O3), followed by sintering at 1370°-1600°C in argon. The densification, microstructural evolution, phase development and thermal stability of the composites were studied after sintering and further annealing by Archimedes, Scanning electron microscopy (SEM) and X-ray diffraction/Rietveld (XRD) techniques. Their non-isothermal and isothermal oxidation behavior was studied under ambient air using a thermogravimetric analyzer (TGA) at 50°-870°C to understand the key parameters influencing their high-temperature oxidation. The selected composites were also preoxidized at 1000°-1200°C for 10-120 minutes to better understand their high-temperature oxidation kinetics and surface layer formation, and hence, to enhance their oxidation resistance by forming a protective surface layer. XRD, Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) were used for structural and surface characterization. In addition, their 4-point DC electrical conductivities were measured up to 800°-1000°C to study their electrical performance as a function of the composition and processing. A microstructural image analysis method was also developed for quantitatively characterizing the degree of distribution (homogeneity) within the composites. Lastly, thick-film embedded thermocouples (e.g. MoSi2-Al2O3//WSi 2-Al2O3) were fabricated using selected composites by a screen printing technique. Their thermoelectric properties were measured in argon by a typical hot-cold junction temperature measurements, while their structural and microstructural analyses were performed by XPS, XRD and SEM.

Degree

thesis:*
Name thesis:degree_name
PhD
Level thesis:degree_level
Dissertation
Discipline thesis:degree_discipline
Industrial and Managements Systems Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Yakaboylu, Gunes Alp
Contributors dc:contributor
  • Edward M Sabolsky
  • Xingbo Liu
  • Konstantinos A Sierros
  • Charter D Stinespring
  • Nianqiang Wu

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Yakaboylu, Gunes Alp. Processing, Stability and High-Temperature Properties of Transition Metal Silicide-Refractory Oxide Composites for Electrical Applications. Dissertation thesis, https://doi.org/10.33915/etd.6993