Back to search

West Virginia University

Nano-derived sensors for high-temperature sensing of H2, SO2 and H2S

Abstract

dc:description.abstract

The emission of sulfur compounds from coal-fired power plants remains a significant concern for air quality. This environmental challenge must be overcome by controlling the emission of sulfur dioxide (SO2) and hydrogen sulfide (H2S) throughout the entire coal combustion process. One of the processes which could specifically benefit from robust, low cost, and high temperature compatible gas sensors is the coal gasification process which converts coal and/or biomass into syngas. Hydrogen (H2), carbon monoxide (CO) and sulfur compounds make up 33%, 43% and 2% of syngas, respectively. Therefore, development of a high temperature (>500°C) chemical sensor for in-situ monitoring H2, H2S and SO2 levels during coal gasification is strongly desired. The selective detection of SO2/H2S in the presence of H2, is a formidable task for a sensor designer. In order to ensure effective operation of these chemical sensors, they must inexpensively function within the gasifier's harsh temperature and chemical environment. Currently available sensing approaches, which are based on gas chromatography, electrochemistry, and IR-spectroscopy, do not satisfy the required cost and performance targets.;There is also a substantial necessity for microsensors that can be applied inexpensively, have quick response time and low power consumption for sustained operation at high temperature. In order to develop a high temperature compatible microsensor, this work will discourse issues related to sensor stability, selectivity, and miniaturization. It has been shown that the integration of nanomaterials as the sensing material within resistive-type chemical sensor platforms increase sensitivity. Unfortunately, nanomaterials are not stable at high temperatures due to sintering and coarsening processes that are driven by their high surface to volume ratio. Therefore, new hydrogen and sulfur selective nanomaterial systems with potentially highly selective and stable properties in the proposed harsh environment were investigated. Different tungstates and molybdates (WO3, MoO3, MgMoO4, NiMoO4, NiWO4, Sr2MgWO6 (SMW), Sr2MgMoO6 (SMM), SrMoO4, and SrWO4) were investigated at the micro- and nano-scale, due to their well-known properties as the reversible absorbents of sulfur compounds. Different morphologies of aforementioned compounds as well as microstructural alterations were also the subject of the investigation. The fabrication of the microsensors consisted of the deposition of the selective nanomaterial systems over metal based interconnects on an inert substrate. This work utilized the chemi-resistive (resistive-type) microsensor architecture where the chemically and structurally stable, high temperature compatible electrodes were sputtered onto a ceramic substrate. The nanomaterial sensing systems were deposited over the electrodes using a lost mold method patterned by conventional optical lithography.;Development of metal based high temperature compatible electrodes was crucial to the development of the high temperature sensor due to the instability of typically used noble metal (platinum) based electrode material over ceramic substrates. Therefore, the thermal stability limitations of platinum films with various adhesion layers (titanium (Ti), tantalum (Ta), zirconium (Zr), and hafnium (Hf)) were characterized at 800 and 1200°C. Platinum (Pt)-zirconium (Zr)-hafnium (Hf) were investigated. The high-temperature stable composite thin film architecture was developed by sequential sputter deposition of Hf, Zr and Pt. In addition to this multilayer architecture, further investigation was carried out by using an alternative DC sputtering deposition process, which led to the fabrication of a functionally-gradient platinum and zirconium composite microstructure with very promising high temperature properties. The final process investigated reduced labor, time and material consumption compared to methods for forming multilayer architectures previously discussed in literature.;In addition to electrical resistivity characterization of the different thin film electrode architectures, the chemical composition, and nano- and micro-structure of the developed nanomaterial films, as well as sensing mechanism, were characterized by means of scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray and ultraviolet photoelectron spectroscopies (XPS and UPS), atomic absorption spectroscopy (AAS), X-ray diffraction (XRD), Raman spectroscopy, temperature programmed reduction (TPR) and transmission electron microscopy (TEM). The macro-configurations of the sensors were tested and analyzed for sensitivity and cross-sensitivity, response time and recovery time, as well as long term stability. The microsensor configuration with optimized nanomaterial system was tested and compared to a millimeter-size sensor platform in terms of sensitivity and accuracy. Electrochemical relaxation (ECR) technique was also utilized to quantify the surface diffusion kinetics of SO2 over the chosen sensor material surface. The outcomes of this research will contribute to the economical application of sensor arrays for simultaneous sensing of H2, H2S, and SO2.

Degree

thesis:*
Name thesis:degree_name
PhD
Level thesis:degree_level
Dissertation
Discipline thesis:degree_discipline
Industrial and Managements Systems Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Ciftyurek, Engin
Contributors dc:contributor
  • Edward M Sabolsky
  • Konstantinos A Sierros
  • Xueyan Song
  • Charter Stinespring
  • Nianqiang Wu

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Ciftyurek, Engin. Nano-derived sensors for high-temperature sensing of H2, SO2 and H2S. Dissertation thesis, https://doi.org/10.33915/etd.7305