Back to search

West Virginia University

Solid state formation of calcium carbide

Abstract

dc:description.abstract

Acetylene is known as an essential chemical building block with increasing prominent applications as a raw material in the production of important organic compounds. An indirect method used to synthesize acetylene is through the decomposition of CaC2 in the presence of water. The current work investigated a process for the synthesis of calcium carbide via a solid-state reaction route and the general kinetics of the reaction was characterized. The calcium carbide was synthesized by conventional and microwave heating (6 kW, 2.45GHz) of micron-sized calcium oxide and carbon powders in argon. The temperature range for these reactions was between 1000--1800°C. The work succeeded in preparing CaC2 within several minutes using microwave heating. A well-crystallized product was obtained with purities as high as 90% CaC2. Three different phase were identified during the reactions depending upon the temperature regime; CaC2 II (at 1600°C), CaC2 II & III (at 1650°C) and CaC2 I, II & III (at 1700°C) were identified using a x-ray diffraction phase identification technique. The apparent activation energy calculated was found to be approximately 125.66 kJ·mol-1.;In addition to variation in reaction temperature, uniaxial pellet compaction load, reaction times, sample mass and heating rates were also varied. The influence of solid particle surface contact, carbon source reactivity and mold configuration were included in this investigation. The effects of the processing techniques and variables on the final density, microstructural properties and percent purity of the resulting products were characterized using the gas chromatograph, X-ray photoelectron spectroscopy and X-ray diffraction techniques.;Finally, the calcium carbide synthesized via microwave heating yielded 80% more carbide formed compared to conventionally processed carbide at 1600°C. The reaction kinetics was increased for all temperatures using the same feed amount. The density and degree of purity of the products were affected by reaction temperature and exposure time, starting particle size of the reactants and the dimension of the sample container.

Degree

thesis:*
Name thesis:degree_name
MS
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Industrial and Managements Systems Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Iyere, Patrick Egbele
Contributors dc:contributor
  • Edward M Sabolsky
  • Ismail Celik
  • Bruce Kang

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Iyere, Patrick Egbele. Solid state formation of calcium carbide. Thesis thesis, https://doi.org/10.33915/etd.7316