Back to search

West Virginia University

Low Power Voltage Reference Cells for Sensing Applications

Abstract

dc:description.abstract

Two low-power voltage reference cells for a system on-chip design are presented in this report. Both cells utilize a combination of standard transistors to produce an output voltage near 1 volt. Choosing the appropriate design procedures can aid in minimizing the temperature coefficient (TC) of the output reference voltage coming out of the cell. One circuit, covered first, is currently being fabricated on a standard 0.5 µm chip complementary metal oxide semiconductor (CMOS) process, while the other is still in the designing stage. The first one has a TC of 86 ppm/◦C with a reference voltage of 1.10 V while consuming 1.25 µW of power by simulation. The second voltage reference cell is aimed for a lower TC, and power consumption approximately 37 ppm/◦C and 2 nW in simulation. Additionally, ideas to improve the circuits will be explored, and the layout of the first cell will be presented in this paper.

Degree

thesis:*
Name thesis:degree_name
MS
Level thesis:degree_level
Problem/Project Report
Discipline thesis:degree_discipline
Lane Department of Computer Science and Electrical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Tucker, Kody Ray
Contributors dc:contributor
  • David Graham
  • Roy Nutter
  • Jeremy Dawson

Subjects

dc:subject × 8

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Tucker, Kody Ray. Low Power Voltage Reference Cells for Sensing Applications. Problem/Project Report thesis, https://doi.org/10.33915/etd.7403