Back to search

West Virginia University

Measured and Modeled Performance of a Spring Dominant Free Piston Engine Generator

Abstract

dc:description.abstract

Free Piston Engine Generators (FPEG) directly convert the reciprocating piston motion into electricity by using a linear alternator. Unlike conventional engines with piston motion restricted by a crankshaft mechanism, the FPEG piston motion is constrained by the energy available in the system. When stiff springs are considered in the design, the FPEG system attains high frequency with high power and efficiency. The main objective of this research was to model stiff spring-assisted FPEG system dynamics and performance accurately, and to apply the modeling results to the development of a 1kW, spark ignited, natural gas fueled, FPEG experimental prototype. The experimental data was further utilized to refine and improve the existing model. First, a MATLAB®/Simulink based multi-cycle numerical model was developed for single and dual cylinder FPEG systems to study the effects of major design parameters on FPEG dynamics and performance. When stiff springs were added, the dynamics became more sinusoidal and symmetric with respect to the initial starting position. For a total displacement of 34 cc, trapped compression ratio of 8.25, and assumed combustion efficiency of 95%, the modeled frequency and electric power varied from 72.3 Hz to 80.8 Hz and 0.81 kW to 0.88 kW for a single cylinder FPEG as the spring stiffness changed from 372 kN/m to 744 kN/m. For a dual cylinder FPEG with the same conditions, these modeled values changed from 76.8 Hz to 84.1 Hz and 1.7 kW to 1.8 kW with increasing spring stiffness. The numerical model was then expanded for sensitivity studies of major design parameters. When FPEG operating conditions were considered, the effective stroke length was found to have a dominant effect on efficiency followed by compression ratio, cylinder bore, and spring stiffness respectively. The experimental FPEG prototype generating 550 W of electricity with indicated efficiencies exceeding 13.8% was used for model validation. Finally, the stable FPEG system requires a control strategy to match the power generated by the engine to the power demanded by the alternator. A model-based control strategy was developed in Stateflow® for alternator mode switching, calibration maps, energy management, ignition and fuel injection timings. With the proposed control strategy and stiff spring dominance, the modeled and experimental FPEG system maintained stable operation with cycle-to-cycle variations less than 5%.

Degree

thesis:*
Name thesis:degree_name
PhD
Level thesis:degree_level
Dissertation
Discipline thesis:degree_discipline
Mechanical and Aerospace Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Bade, Ramanjaneya Mehar Baba
Contributors dc:contributor
  • Nigel. N. Clark
  • Parviz Famouri
  • Terence Musho
  • Derek Johnson
  • Cosmin Dumitrescu

Subjects

dc:subject × 14

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
West Virginia University
Base URL
researchrepository.wvu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Bade, Ramanjaneya Mehar Baba. Measured and Modeled Performance of a Spring Dominant Free Piston Engine Generator. Dissertation thesis, https://doi.org/10.33915/etd.7528