Submitted by Johnny Rodrigues (johnnyrodrigues@ufcg.edu.br) on 2018-04-04T20:09:37Z No. of bitstreams: 1 GLÓRIA TAMIRIS FARIAS DA SILVA FURTADO - DISSERTAÇÃO PPG-CEMat 2014..pdf: 2828132 bytes, checksum: 5e63edac512ab6bfb0b360a80afb5927 (MD5) / Made available in DSpace on 2018-04-04T20:09:37Z (GMT). No. of bitstreams: 1 GLÓRIA TAMIRIS FARIAS DA SILVA FURTADO - DISSERTAÇÃO PPG-CEMat 2014..pdf: 2828132 bytes, checksum: 5e63edac512ab6bfb0b360a80afb5927 (MD5) Previous issue date: 2014-08-28 / O câncer vem crescendo nas estatísticas da saúde pública, e o melanona é um dos tipos mais letais. Tem-se pesquisado substâncias que sejam menos tóxicas e que possam ser liberadas de forma controlada através de sistemas farmacêuticos. Para desenvolver os sistemas farmacêuticos utilizam-se materiais polímeros, os quais serão responsáveis pelo o controle de liberação da droga in situ desejado. A quitosana tem sido estudada por apresentar propriedades como atividade antimicrobiana, analgésico, pode ser modificada químicamente, fácil acesso e de baixo custo. O objetivo deste trabalho foi desenvolver e avaliar membranas de quitosana para o uso em sistemas de liberação controlada da curcumina para o tratamento de melanoma. As amostras foram preparadas pelo método de evaporação de solvente, utilizando uma solução de ácido acético (1% v/v), para obter uma solução de quitosana a 2% (m/v). As membranas de quitosana/curcumina foram obtidas a partir da dissolução da curcumina em etanol (1,2 mg/ml), vertendo-a na solução de quitosana, As membranas de quitosana com e sem curcumina, foram caracterizadas por FTIR, DRX, MEV, TG, DSC, GI, biodegradação enzimática, citotoxicidade (MCF-7), e como também realizado o desenvolvimento e validação do método analítico, e determinação do teor de curcumina na membrana desenvolvida. A partir das caracterizações ficou evidenciado que o método de processamento usado na obtenção da membrana quitosana/curcumina é adequado, tendo em vista que não houve degradação da curcumina. As membranas de quitosana/curcumina apresentaram menor intumescimento e degradação, e maior estabilidade quando comparadas às membranas de quitosana. Para o ensaio de citotoxicidade as membranas de quitosana/curcumina apresentaram potencial para o tratamento de câncer. O método analítico desenvolvido está conforme a RE Nº 899/2003 da ANVISA. Logo, o método utilizado foi adequado para identificação e quantificação da curcumina na membrana de quitosana/curcumina. Diante dos resultados obtidos, o sistema desenvolvido apresenta potencial para aplicações em liberação controlada de drogas. / The cancer is growing in public health statistics, and the melanoma is one of the most lethal types. Research has focused on substances that are less toxic and can be released in a controlled way through the developoment of pharmaceutical systems. To develop pharmaceutical systems are used polymer materials, which will be responsible for the drug release control in situ. Chitosan has been studied for having properties such as antimicrobial, analgesic, may be chemically modified, easy and inexpensive. The aim of this study was to develop and evaluate chitosan membranes for curcumin controlled release systems for treating melanoma. Samples were prepared by solvent casting, using a solution of acetic acid (1% v/v) to obtain a chitosan solution at 2% (w/v). The membranes of chitosan/curcumin was obtained from the dissolution of curcumin in ethanol (1.2 mg / ml) pouring the solution of chitosan, chitosan membranes with and without curcumin were characterized by FTIR, XRD, SEM, TG, DSC, SD, enzymatic degradation, cytotoxicity (MCF-7), and also performed as the development and validation of the analytical method, and determination of curcumin in membrane developed. From the characterizations became evident that the processing method used in obtaining the chitosan membrane/curcumin is appropriate, considering there was no degradation of curcumin. The membranes of chitosan/curcumin showed lower swelling ratio and degradation, and increased stability as compared to the chitosan membranes. For the cytotoxicity assay the membranes of chitosan/curcumin showed potential for the treatment of cancer. The developed analytical method is accordint to the ANVISA resolution No. RE 899/2003. Therefore, the method was suitable for identification and quantification of curcumin in chitosan/curcumin membranes. Based on these results, the system developed has potential for applications in controlled release of drugs.

Chitosan is a cationic natural polymer that is widely used as a topical dressing in wound management. Temporary coatings of removable denture bases with chitosan might be useful as supportive treatment in oral medicine. The aim of this study was to analyze the thickness, uniformity, and adhesive strength of chitosan coatings on simulated denture bases made from polymethyl methacrylate (PMMA). According to a standardized protocol, 20 PMMA cylinders (13 mm diameter, 5 mm in height) as well as 20 cubes (a = 25 mm) with intaglio U-shaped profiles were manufactured to simulate average sized alveolar ridges. Cylinders as well as cubes were divided into four test series with n = 5 each. After sandblasting with silica-modified alumina, one frontal surface of the PMMA cylinders and the intaglio surfaces of the U-shaped profiles was coated with chitosan acetate solution according to the following protocols: one layer of 2% chitosan acetate solution (test series I), one layer of 4% chitosan acetate solution (test series II), two layers of 2% chitosan acetate solution (test series III), and two layers of 4% chitosan acetate solution (test series IV). After drying and neutralization with NaOH, each cube was cut transversely and the coating thickness across the U-shaped profile assessed with a light microscope. Adhesive strength was evaluated by simulated tooth brushing and the loss of chitosan coating was evaluated qualitatively. Statistical analysis used Friedman ANOVA test for dependent samples and Kruskal-Wallis test for independent samples, post-hoc Dunn’s test (p < 0.05), and binomial test (p = 0.05). The mean chitosan coating thicknesses in the depth of the U-profiles were 71 µm (test series I), 77 µm (test series II), 121 µm (test series III), and 517 µm (test series VI). The thickness continuously decreased with rising angulation of the U-profile side walls. In test series I, the chitosan coating thickness significantly dropped above a 30° angulation of the U-profile side walls. In test series II to IV, the chitosan thickness drop was not statistically significant at angulations of 30° and 60°, but was at 90° angulation of the U-profile side walls. Adhesion strength was rated fair to good and did not differ significantly among the four test series. The coating technique described revealed chitosan layers with overall good adhesion strength but differing thicknesses. Coatings with one or two layers of 4% chitosan acetate solution allowed a relatively uniform chitosan thickness and thus might be usable in oral medicine.

Baker´s yeast (Saccharomyces cerevisiae) were magnetically modified by three different methods, namely, surface modification by magnetic fluid, entrapment of cells into alginate and covalent immobilization on particles of magnetic chitosan. The ability of H2O2 decomposition was tested for all types of modification. It is apparent that the most amount of hydrogen peroxid was degraded by magnetic fluid - modified cells (84-95%), while the efficiency of cell which were modified by other methods was much lower (40-60%). Thanks to immobilization on particles of magnetic chitosan, we made completely new type of magnetic material, which was tested for adsorption of Crystal violet and Safranin O. It was founded that magnetic chitosan adsorbs no dyes, so all adsorption belongs to immobilized yeast. The maximum adsorption capacities were determined using Langmuire isotherm at 69,4 mg/g for Crystal violet and 99,0 mg/g for Safranin O.

L’objectif de cette thèse est d’élaborer des nanohybrides à base des nanotubes de titanate (TiONts) dans le but de les utiliser comme nanovecteurs d’une molécule thérapeutique : un phénol stilbénique, le 4’ hydroxy 4 (3 aminopropoxy)-trans-stilbène (HAPtS), structurellement proche du trans-resvératrol.Les TiONts sont synthétisés par traitement hydrothermal à partir du dioxyde de titane sous sa forme rutile. Deux méthodes de synthèse hydrothermale (statique et dynamique) ont été étudiées. La deuxième méthode est originale car elle utilise un réacteur conduisant à une agitation mécanique forte par balancement où le temps d’agitation par heure de traitement peut-être contrôlé. Une étude paramétrique a été menée pour évaluer l’impact de la durée de traitement, de la température et du temps d’agitation appliqué par heure sur la morphologie des structures obtenues. Il a été montré que l’agitation par balancement, appliquée durant la synthèse, a un effet accélérateur sur la cinétique de formation des TiONts en mode dynamique. Par optimisation des paramètres de synthèse, il a été possible de réduire la durée de la synthèse des TiONts à 2h seulement, au lieu de 48 h en méthode statique. Des discussions sur la structure cristalline, le mécanisme de formation des TiONts et leur transformation en nanorubans ont également été développées en se basant sur différentes techniques de caractérisations (DRX, MET, ATG, XPS, spectroscopies UV visible, IR et Raman). La morphologie spéciale des TiONts, en spirale (diamètre externe de 10 nm, diamètre interne de 4 nm avec une longueur moyenne d’environ 190 nm) et multicouches (3 à 5 couches) leur confère une surface spécifique élevée (> 200 m²/g).Différentes préfonctionnalisations des TiONts par des ligands organiques biocompatibles ont été effectuées pour améliorer la stabilité des TiONts en suspension et greffer à leur surface des groupements fonctionnels réactifs. Les ligands étudiées sont : deux catéchols, le DHCA et la L-DOPA, l’acide citrique et deux organosilanes, l’APTES et le CPTES. Les paramètres optimaux de greffage ont été déterminés et la présence de liens covalents entre ces ligands et les TiONts ont été établis, principalement par XPS et IR.Après préfonctionnalisation avec le CPTES, le greffage du phénol stilbénique (HAPtS) a été un succès. Cette molécule a été accrochée à la surface des TiONts-CPTES par une réaction de condensation entre le HAPtS et le CPTES par substitution nucléophile et a conduit à un taux de greffage d’environ 20 mg/g de TiONts.Enfin, l’une des originalités de ce travail a consisté à améliorer la biocompatibilité des TiONts, à travers la modification de leur surface par un polymère naturel, le chitosan (CT). Ce dernier a été greffé à la surface des nanotubes par deux méthodes différentes via des liaisons covalentes (greffage étape par étape mettant en œuvre de l’APTES puis du glutaraldehyde) ou via des interactions électrostatiques (adsorption). Après comparaison entre les deux approches, les premiers tests d’évaluation de la toxicité, in vitro (test de cinétique de synthèse des ARN et test du rouge neutre) et in vivo (embryons de poisson zèbre), ont été réalisés et les résultats ont confirmé la biocompatibilité des nanohybrides synthétisés avec les systèmes biologiques. Une étude de la stabilité colloïdale des TiONts-CT dans différents milieux mimant des milieux biologiques a également été menée.Mots clés : Nanotubes de titanate, synthèse hydrothermale dynamique, nanovecteurs, nanohybrides, stabilité colloïdale, fonctionnalisation, greffage, ligands organiques, catéchols, organosilanes, phénol stilbénique, chitosan, biocompatibilité. / The aim of this PhD thesis is to develop new nanohybrids based on titanate nanotubes (TiONts) in order to use them as nanocarrier of a therapeutic molecule: a stilbene phenol, 4'-hydroxy-4-(3-aminopropoxy)-trans-stilbene (HAPtS), which is a transresveratrol derivative.TiONts are synthesized by a hydrothermal treatment from a precursor of rutile titanium dioxide. Two methods of hydrothermal synthesis have been studied (the static and dynamic ones): the second approach uses an original hydrothermal device which provides a vigorous mechanical stirring during the hydrothermal process with controllable stirring time par hour. A parametric study was carried out to evaluate the effect of reaction time, temperature and stirring time during the hydrothermal treatment on the morphology of the obtained products. It has been proved that the mechanical stirring has a great accelerating effect on the kinetics of the TiONts formation during the dynamic hydrothermal synthesis. After optimization of the experimental parameters of the dynamic hydrothermal treatment, it was possible to reduce the time of TiONts synthesis to only 2 hours, instead of 48 hours obtained by the static method. Discussions about the crystal structure of TiONts, about their formation mechanism and their transformation into nanoribbons have been also developed based on different characterization techniques (XRD, TEM, TGA, XPS, UV visible, IR and Raman spectroscopies). Their special hollow morphology (10 nm in outer diameter, inner diameter of 4 nm, average length of about 190 nm) and multilayered structure (3 to 5 layers) impart them a high specific surface area (>200 m²/g). Different prefunctionalizations of TiONts by biocompatible organic ligands have been carried out to improve their colloidal stability and to graft reactive functional groups on their surface. The studied ligands are: two catechols (DHCA and L-DOPA), citric acid and two organosilanes (APTES and CPTES). Optimal grafting parameters were determined and the presence of covalent bonds between these ligands and TiONts was highlighted especially by XPS and IR. After prefunctionalization with CPTES, the stilbenic phenol (HAPtS) was successfully grafted onto TiONts-CPTES surface using a condensation reaction between HAPtS and CPTES through nucleophilic substitution. The resulting grafting rate was of about 20 mg/g of TiONts. Finally, one of the originalities of this work was the improvement of TiONts biocompatibility by surface modification with a natural polymer, chitosan (CT). The latter was grafted by two different approaches via covalent bonds (step by step grafting using APTES then glutaraldehyde as two intermediate molecules) or via electrostatic interactions (adsorption). After comparing the two elaborated nanohybrids, obtained by the two grafting approaches, the first cytotoxicity assessment tests were carried out, in vitro (RNA synthesis test and neutral red test) and in vivo (zebrafish test), and the obtained results confirmed the biocompatibility of these nanohybrids towards biological systems. A colloidal stability study of TiONts-CT in various mimicked biological media was also carried out.Keywords: Titanate nanotubes, dynamic hydrothermal synthesis, nanocarriers, nanohybrids, colloidal stability, functionalization, grafting, organic ligands, catechols, organosilanes, stilbenic phenol, chitosan, biocompatibility.

Chitosan is known for its hemostatic and antimicrobial properties and might be useful for temporary coating of removable dentures or intraoral splints to control bleeding after oral surgery or as a supportive treatment in denture stomatitis. This study investigated a new method to adhere chitosan to polymethyl methacrylate (PMMA) and polyethylene terephthalate (PET). There were 70 cylindrical specimens made from PMMA and 70 from PET (13 mm diameter, 6 mm thickness). The materials with ten specimens each were sandblasted at 2.8 or 4.0 bar with aluminum oxide 110 μm or/and aluminum oxide coated with silica. After sandblasting, all specimens were coated with a 2% or 4% acetic chitosan solution with a thickness of 1 mm. Then the specimens were dried for 120 min at 45 °C. The precipitated chitosan was neutralized with 1 mol NaOH. After neutralization, all specimens underwent abrasion tests using the tooth-brushing simulator with soft brushes (load 2N, 2 cycles/s, 32 °C, 3000 and 30,000 cycles). After each run, the specimen surfaces were analyzed for areas of remaining chitosan by digital planimetry under a light microscope. The best chitosan adhesion was found after sandblasting with aluminum oxide coated with silica (U-Test, p < 0.05) in both the PMMA and the PET groups. Hence, with relatively simple technology, a reliable bond of chitosan to PMMA and PET could be achieved.

Chitosan is known for its hemostatic and antimicrobial properties and might be useful for temporary coating of removable dentures or intraoral splints to control bleeding after oral surgery or as a supportive treatment in denture stomatitis. This study investigated a new method to adhere chitosan to polymethyl methacrylate (PMMA) and polyethylene terephthalate (PET). There were 70 cylindrical specimens made from PMMA and 70 from PET (13 mm diameter, 6 mm thickness). The materials with ten specimens each were sandblasted at 2.8 or 4.0 bar with aluminum oxide 110 μm or/and aluminum oxide coated with silica. After sandblasting, all specimens were coated with a 2% or 4% acetic chitosan solution with a thickness of 1 mm. Then the specimens were dried for 120 min at 45 °C. The precipitated chitosan was neutralized with 1 mol NaOH. After neutralization, all specimens underwent abrasion tests using the tooth-brushing simulator with soft brushes (load 2N, 2 cycles/s, 32 °C, 3000 and 30,000 cycles). After each run, the specimen surfaces were analyzed for areas of remaining chitosan by digital planimetry under a light microscope. The best chitosan adhesion was found after sandblasting with aluminum oxide coated with silica (U-Test, p < 0.05) in both the PMMA and the PET groups. Hence, with relatively simple technology, a reliable bond of chitosan to PMMA and PET could be achieved.

Chitosan is a cationic natural polymer that is widely used as a topical dressing in wound management. Temporary coatings of removable denture bases with chitosan might be useful as supportive treatment in oral medicine. The aim of this study was to analyze the thickness, uniformity, and adhesive strength of chitosan coatings on simulated denture bases made from polymethyl methacrylate (PMMA). According to a standardized protocol, 20 PMMA cylinders (13 mm diameter, 5 mm in height) as well as 20 cubes (a = 25 mm) with intaglio U-shaped profiles were manufactured to simulate average sized alveolar ridges. Cylinders as well as cubes were divided into four test series with n = 5 each. After sandblasting with silica-modified alumina, one frontal surface of the PMMA cylinders and the intaglio surfaces of the U-shaped profiles was coated with chitosan acetate solution according to the following protocols: one layer of 2% chitosan acetate solution (test series I), one layer of 4% chitosan acetate solution (test series II), two layers of 2% chitosan acetate solution (test series III), and two layers of 4% chitosan acetate solution (test series IV). After drying and neutralization with NaOH, each cube was cut transversely and the coating thickness across the U-shaped profile assessed with a light microscope. Adhesive strength was evaluated by simulated tooth brushing and the loss of chitosan coating was evaluated qualitatively. Statistical analysis used Friedman ANOVA test for dependent samples and Kruskal-Wallis test for independent samples, post-hoc Dunn’s test (p < 0.05), and binomial test (p = 0.05). The mean chitosan coating thicknesses in the depth of the U-profiles were 71 µm (test series I), 77 µm (test series II), 121 µm (test series III), and 517 µm (test series VI). The thickness continuously decreased with rising angulation of the U-profile side walls. In test series I, the chitosan coating thickness significantly dropped above a 30° angulation of the U-profile side walls. In test series II to IV, the chitosan thickness drop was not statistically significant at angulations of 30° and 60°, but was at 90° angulation of the U-profile side walls. Adhesion strength was rated fair to good and did not differ significantly among the four test series. The coating technique described revealed chitosan layers with overall good adhesion strength but differing thicknesses. Coatings with one or two layers of 4% chitosan acetate solution allowed a relatively uniform chitosan thickness and thus might be usable in oral medicine.

[EN] The aim of tissue engineering is to develop functional biological substitutes to replace or restore damaged tissues by preparing three-dimensional scaffolds able to accommodate cells plus signaling factors to promote the regeneration of damaged tissue. There is a special interest in developing scaffolds that while providing a favourable environment for cells also possess a degradation rate that can be adapted to the tissue's rate of regeneration. Scaffolds should be porous and possess a pore morphology adapted to the application for which they are designed. They must also be able to hold large quantities of water (hydrogels) while presenting suitable cell/biomaterial interaction. The aim of this thesis is to create chitosan-based three-dimensional porous structures with tunable degradation rates with particular interest in fast degradation rate. Hydrogels of block-copolymer networks were prepared to crosslink the chitosan (CHT) or carboxymethyl chitosan (CmCHT) with either a hydrophobic polymer of low molecular weight, such as poly(&#949;-caprolactone), (PCL) or a hydrophilic polymer such as poly(ethylene glycol), (PEG). The hypothesis was that the degradation of the cross-linker polymer leaves behind large water-soluble polymer chains (protonated chitosan or carboxymethyl chitosan). However, in spite of chitosan's favourable properties, the polymer has relatively slow biodegradation times in enzymatic media that contain lysozyme and even slower in hydrolytic conditions. Chitosan's physical and chemical properties largely depend on its deacetylation degree (DD). In order to analyze these properties, chitosan was synthesized with various DD ranging from 85% to 45%. Water absorption was seen to rise rapidly as deacetylation was reduced. This would appear to contradict the fact that chitin water absorption (low DD) is much lower than that of chitosan. In order to understand this behaviour, it was analyzed the dependence of the degree of network swelling on the parameters determined by the Flory Rhener theory, the elastic properties of the network and the density of the cross-linking according to the sample's water content. The thermal stability of chitosan according to its DD was analysed by thermogravimetry. Different methods were applied to obtain the activation energy. Electrospinning was chosen as the porous membrane preparation technique as it provides thin membranes that can be handled with fiber sizes in the order of microns. The influence of the electrospinning and cross-linking processes on the thermal stability of chitosan was analyzed. Chitosan and carboxymethyl chitosan hydrogels covalently cross-linked with short chains of poly(&#949;-caprolactone), (PCL) and poly(ethylene glycol) (PEG) were synthesized. The formation of networks was confirmed by solubility tests with appropriate solvents for each polymer. Hydrogels that absorbed large quantities of water were obtained, with values that ranged between 90 and 5000%. The calorimetric tests together with the Studies on the kinetics of hydrolytic and enzymatic biodegradation showed three different systems: CmCHT-PEG system that can be classified as stable hydrogel, CHT-PCL system as semidegradable hydrogel and degradable hydrogels with degradation kinetics in the order of days for the CmCHT-PCL system. Finally, biological studies were carried out on porous CmCHT-PCL hydrogels. Mesenchymal stem cells (MSCs) from pig adipose tissue were then cultivated and the results showed that these networks can be used in the organism in tissue engineering applications with degradation times of around a week. / [ES] La ingeniería tisular tiene como finalidad desarrollar sustitutos biológicos funcionales que reemplacen o restauren los tejidos dañados. Se trata de preparar andamiajes tridimensionales (scaffolds) que sean capaces de albergar células y factores de señalización que favorezcan la regeneración del tejido dañado. Existe un especial interés en el desarrollo de scaffolds que proporcionando un entorno favorable a las células, tengan una tasa de degradación que se adapte a velocidad de regeneración del tejido. Los scaffolds deben ser porosos y poseer una morfología del poro adaptada a la aplicación para la que son diseñados. Deben ser capaces de albergar gran cantidad de agua (hidrogeles) al tiempo que presentan una interacción célula/biomaterial adecuada. El objetivo de esta tesis es el de crear estructuras porosas tridimensionales basadas en quitosano con velocidades de degradación ajustables con particular interés en velocidades de degradación altas. Se han preparado hidrogeles de redes de copolimeros en bloque entrecruzando el quitosano, (CHT) o el carboximetil quitosano, (CmCHT) con un polímero hidrófobo de bajo peso molecular como la poli(&#949;-caprolactona), (PCL) o bien con un polímero hidrófilo como es el poli(etilenglicol), (PEG). La hipótesis de trabajo fue que la degradación del polímero que actúa como entrecruzador debe dejar grandes cadenas del polímero (quitosano protonado o carboximetil quitosano) que son solubles en agua. A pesar de las buenas propiedades del quitosano, el polímero presenta tiempos de biodegradación bastante lentos en medio enzimático conteniendo lisozima y aún más lentos en condiciones hidrolíticas. Las propiedades físico-químicas del quitosano dependen en gran medida del grado de desacetilación, DD. Con el fin de analizar dichas propiedades se ha llevado a cabo la síntesis de quitosano con DD variando entre 85% y el 45%. Se ha comprobado que la absorción de agua aumenta rápidamente a medida que el grado de desacetilación disminuye. Esto parece contradecir el hecho de que la absorción de agua de la quitina (DD bajo) es mucho menor que la de quitosano. Para entender dicho comportamiento se han analizado los parámetros que determinan la teoría de Flory Rhener, las propiedades elásticas de la red y la densidad de entrecruzamiento en función del contenido en agua de la muestra. La estabilidad térmica del quitosano en función de DD ha sido analizada por termogravimetría. Se han aplicado diferentes métodos para obtener la energía de activación. Como técnica de preparación de membranas porosas se ha elegido el electrohilado, ya que permite obtener membranas delgadas y manipulables con tamaños de fibra del orden de micras. Se ha analizado la influencia de los procesos de electrohilado y entrecruzamiento en la estabilidad térmica del quitosano. Se han sintetizado hidrogeles de quitosano, y carboximetil quitosano entrecruzados covalentemente con cadenas cortas de poli(&#949;-caprolactona), y poli(etilenglicol). La formación de las redes se ha confirmado mediante ensayos de solubilidad con buenos solventes para cada polímero. En todos los casos se han obtenido hidrogeles que absorben gran cantidad de agua con valores que oscilan entre 90 y 5000%. Los estudios de las cinéticas de biodegradación tanto hidrolítica como enzimática revelan la obtención de tres sistemas que se pueden clasificar como hidrogeles estables, para los hidrogeles formados por CmCHT-PEG, hidrogeles semidegradables para el sistema CHT-PCL y finalmente hidrogeles degradables con cinéticas de degradación del orden de días, para el sistema CmCHT-PCL. Finalmente se ha llevado a cabo estudios biológicos de los hidrogeles porosos de CmCHT-PCL. Se realizaron cultivos con células mesenquimales del tejido adiposo de cerdo (MSCs). Los resultados han revelado que dichas redes pueden ser utilizadas como sistemas de liberación de células en el organismo con tiempos de degradación / [CA] L'enginyeria tissular té com a finalitat desenvolupar substituts biològics funcionals que reemplacen o restauren els teixits danyats. Es tracta de preparar suports tridimensionals (esquelets o scaffolds) que siguen capaços d'albergar cèl.lules i factors de senyalització que afavorisquen la regeneració del teixit danyat. Hi ha un interès especial en el desenvolupament d'esquelets que, proporcionant un entorn favorable a les cèl.lules, tinguen una taxa de degradació que s'adapte a la velocitat de regeneració del teixit. Els scaffolds han de ser porosos i han de tenir una morfologia del porus adaptada a l'aplicació per a la qual són dissenyats. Han de ser capaços d'albergar una gran quantitat d'aigua (hidrogels) alhora que presenten una interacció cèl.lula/biomaterial adequada. L'objectiu d'aquesta tesi és crear estructures poroses tridimensionals basades en quitosan amb velocitats de degradació sintonizables amb un interés particular de rutes de degradació altes. S'han preparat hidrogels de xarxes de copolímers en bloc entrecreuant el quitosan o el carboximetil quitosan amb un polímer hidròfob de baix pes molecular com la poli (&#949;-caprolactona), o bé amb un polímer hidròfil com és el poli (etilenglicol). Es tracta d'aconseguir que quan el polímer que actua com a entrecreuador es degrade, deixe grans cadenes del polímer (quitosan protronat o carboximetil quitosan) que són solubles en aigua. A pesar de les bones propietats del quitosan, el polímer presenta cinètiques de biodegradació lentes en condicions enzimàtiques quan conté lisozima i encara més lentes en condicions hidrolítiques. Les propietats fisicoquímiques del quitosan depenen en gran mesura del grau de desacetilació, DD. A fi d'analitzar aquestes propietats, s'ha dut a terme la síntesi de quitosan amb un DD que variava entre el 85% i el 45%. S'ha comprovat que l'absorció d'aigua augmenta ràpidament a mesura que el grau de desacetilació disminueix. Això sembla que contradiu el fet que l'absorció d'aigua de la quitina (DD baixos) és molt menor que no la de quitosan. Per a entendre aquest comportament s'ha analitzat la dependència del grau d'unflament de la xarxa amb els paràmetres que determina la teoria de Flory Rhener, les propietats elàstiques de la xarxa i la densitat d'entrecreuament en funció del contingut en aigua de la mostra. L'estabilitat tèrmica del quitosan en funció del DD ha sigut analitzada per termogravimetria. S'han aplicat diversos mètodes per obtenir l'energia d'activació. Com a tècnica de preparació de membranes poroses s'ha utilitzat l'electrofilatura, ja que permet obtenir membranes primes i manipulables amb grandàries de fibra de l'ordre de micres. S'ha analitzat la influència dels processos d'electrofilatura i entrecreuament amb l'estabilitat tèrmica del quitosan. S'han sintetitzat hidrogels de quitosan i carboximetil quitosan entrecreuats covalentment amb cadenes curtes de poli(&#949;-caprolactona) i poli(etilenglicol). La formació de les xarxes s'ha confirmat per mitjà d'assajos de solubilitat amb bons solvents per a cada polímer. En tots els casos s'han obtingut hidrogels que absorbeixen una gran quantitat d'aigua, compresa en valors que oscil.len entre el 90 i el 5.000%. Els estudis de les cinètiques de biodegradació tant hidrolítica com enzimàtica revelen l'obtenció de tres sistemes que es poden classificar com a hidrogels estables (per als hidrogels formats per CmCHT-PEG), hidrogels semidegradables (per al sistema CHT-PCL) i, finalment, hidrogels degradables amb cinètiques de degradació de l'ordre de dies (per al sistema CmCHT-PCL). Finalment s'ha dut a terme estudis biològics dels hidrogels porosos de CmCHT-PCL. Es van realitzar cultius amb cèl.lules mesenquimals del teixit adipós de porc (MSCs). Els resultats han revelat que aquestes xarxes poden ser utilitzades com a sistemes d'alliberament de cèl.lules en l'organisme amb temps de degradació de l'ordre d'una setm / Gámiz González, MA. (2016). Biodegradable hydrogels based on water-soluble chitosan for cell transplant [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/73070 / TESIS

L'utilisation du plutonium (Pu(IV) pour des applications militaires et civiles peut engendrer des contaminations internes chez les personnes exposées. Plusieurs voies de contamination sont possibles : par ingestion, par inhalation ou par blessure. En cas d'inhalation, le plutonium se présente le plus souvent sous forme de particules d'oxyde de plutonium qui vont se localiser au sein des alvéoles pulmonaires. Par un mécanisme de phagocytose, les particules sont internalisées par les macrophages de l'épithélium pulmonaire. Actuellement, le seul agent de décorporation administré en cas de contamination au plutonium est le DTPA (l'acide diethylenetriaminepentaacetique). Il est administré en France sous forme de CaNa3-DTPA par injection intraveineuse et est efficace pour les contaminations par ingestion et par blessure. Les nanoparticules fonctionnalisées à base de polymères naturels sont un concept innovant de décorporation du Pu(IV) solubilisé dans les macrophages pulmonaires et ouvrent la voie au développement de nouvelles familles de décorporants. C'est dans ce contexte que deux stratégies ont été développées : des nanoparticules à base de N-trimethyl chitosan fonctionnalisées par le ligand DTPMP (l'acide diéthylènetriaminepentamethylene phosphonique) qui est l'analogue phosphonique du DTPA et des nanoparticules chélatantes à base de -cyclodextrines amphiphiles anioniques. Ce travail a consisté en la synthèse et la caractérisation des nano-objets puis de l'étude de leur complexation avec les actinides (Th/Pu) en utilisant la spectroscopie EXAFS. Et enfin, des tests préliminaires biologiques in vitro ont été réalisés. Les résultats obtenus, avec les nanoparticules à base de chitosan et de DTPMP montrent que les nanoparticules présentent des tailles et une stabilité compatible avec l’application visée. D’autre part, leur affinité pour les actinides (IV) (Th,Pu) est comparable à celle du chélatant de référence, le DTPA. Enfin, les tests, effectués sur deux lignées de macrophages montrent que les nanoparticules sont internalisées très rapidement et que la matrice polysaccharidique semble se dégrader, permettant le relargage du chélateur DTPMP au niveau des sites de rétention du Pu(IV). Cette thèse constitue un travail préliminaire au développement d'une nouvelle famille d’agents décorporants plus ciblés pour une contamination au plutonium par inhalation. / The use of plutonium (Pu(IV) for military and civil applications can lead to internal contamination. There are several possible routes of contamination: ingestion, inhalation or injury. In case of plutonium inhalation, the plutonium forms oxide particles that reach the pulmonary alveoli. Through a phagocytosis mechanism, the particles are internalized by the macrophages of the pulmonary epithelium and continue to exert their toxicity. Currently, the only decorporating agent administered in the event of contamination with plutonium is DTPA (diethylenetriaminepentaacetic acid). in France, it is administered as CaNa3-DTPA by intravenous injection. This standard is effective for contamination by ingestion and injury. However, it is not effective in case of contamination by inhalation. Functionalized nanoparticles based on natural polymers constitute an innovative concept for decorporating Pu(IV) solubilized in pulmonary macrophages and open the way for the development of new families of decorporants. We investigated two strategies: chitosan-based nanoparticles functionalized by the DTPMP (diethylenetriaminepentamethylene phosphonic acid) which is the phosphonic analog of DTPA and self-organized chelating β-cyclodextrin-based nanoparticles. This work was first focused on the synthesis and characterization of the nano-objects and then on the study of their complexation abilities with actinides (Th/Pu) using EXAFS spectroscopy. Finally, preliminary in vitro biological tests were carried out. Our obtained results with DTPMP and chitosan based nanoparticles showed that these aggregates exhibit size and stability compatible with the application. Furthermore, we demonstrate their affinity for the actinides(IV) (Th, Pu) is comparable to the reference DTPA. Finally, in vitro tests realized onto macrophages show that our nanoparticles are rapidly internalized through phagocytosis and that the polysaccharide matrix seems to undergo degradation which allows the DTPMP to be released and targeted right into the sequestration sites of Pu(IV). This work constitutes a first step in the development of new family of decorporating agents with a higher efficiency in case of plutonium contamination through inhalation.

Oily wastewater produced from petroleum and petrochemical refining processes is one of the gravest environmental threats. Oil waste ending up in sewers and dumps each year is equal to 25 times the amount of crude oil spilled in the Exxon Valdez accident (1989). Oil/Water separation covers a broad spectrum of industrial process operations. There are many techniques employed depending on each situation. The byproduct of water recovery from oily wastewater is a sludge rich in oil, surfactants and particles (oily sludge). The oily sludge still contains significant amounts of waters, which need to be recovered prior to its disposal. The use of polyelectrolytes for the flocculation of the emulsified oil and its separation from the aqueous phase is usually one of the steps of the wastewater as well as oily sludge treatment process. The efficiency of polyelectrolytes as floculants is quite often evaluated via trial and error and the appropriate polymer is selected according to the case. Even in scientific investigations it is rather common to use industrial oily sludge samples. The industrial oily sludge is characterized and treated by polyelectrolytes. Nevertheless industrial oily sludge is quite complicated and variable to be approximated by a model. For the systematic study of polyelectrolytes efficiency a stable, realistic and well-defined oily sludge model is necessary. In the present work an oily sludge model was successfully developed and characterized. The model consists on water, oil (kerosene), surfactant (sodium dodecyl sulphate, SDS) and clay particles (Blauton). The emulsifying efficiency of the surfactant and the clay were studied independently. The interactions between the surfactant and the clay including adsorption of the former on the later and cation exchange reactions were investigated. The four components were finally combined to form a series of emulsions varying the relative amounts of the emulsifiers for the highest stability to be encountered. Having concluded on the composition of the oily sludge model the efficiency of various polyelectrolytes was evaluated. Commercial natural (chitosans), synthetic (PolyDADMACs) polyelectrolytes and oilbreaks as well as lab-scale semi-synthetic polymers (modified chitosans) were tested. The flocculation efficiency was determined based on the amount and quality of water that was recovered as well as on the floc stability, size and sedimentation speed. The recovered water was characterized according to the environmental protection agency (EPA). The analysis included measurements on: total organic carbon (TOC), chemical oxygen demand (COD), biochemical oxygen demand (BOD5), total suspended solids (TSS) and pH. Selection of the appropriate flocculant also depends on the type of flocs formed in combination to the treatment following the flocculation. When filtration or centrifugation is used as a post-flocculation process the appropriate polymers are those that form large and porous flocs, as the case of the modified chitosans AG95 and AG97. Clarification devices on the other hand require dense flocs as these produced by the use of PolyDADMACs, commercial chitosans, oilbreaks and modified chitosans GA35, GA41 and AG79. Regarding the water quality, some of the polymers used that have low values of COD, TOC and BOD5, may not need the secondary treatment (biological) prior to discharge, such as P187K (PolyDADMAC) and GA41 (modified chitosan). The others require a biological treatment for the regulation limits to be reached. The pH values of modified chitosans (except of AG97), lab-scale PolyDADMACs and an oilbreak (OCAA) are all in range of the regulation limits. The applicability of biopolymers as flocculants for oil sludge dewatering is a relatively new field of investigation. As a consequence of the growing demand for environmentally friendly technologies as well as renewable resources the interest on natural flocculants has increased. The aminopolysaccharide chitosan and its modified derivatives have outstanding properties such as biocompability, biodegradability, hydrophilicity, adsorption, flocculating ability and antibacterial properties. These natural polymers derived from the sea-food industry waste products would be very useful as residue oil adsorbents in any oily wastewater and can be among the most promising candidates as a replacement of the synthetic flocculants. / Ölhaltiges Abwasser, das bei Erdöl- und petrolchemischen Raffinierungsprozessen entsteht, ist eine der größten Umweltgefahren. Dieses Altöl landet jedes Jahr in der Kanalisation und in Deponien. Es handelt sich dabei um die 25-fache Menge an Rohöl, die beim Unfall der Exxon Valdez (1989) ausgeflossen ist. Die Öl/Wasser-Trennung überspannt ein breites Spektrum industrieller Prozesse. Es gibt viele Techniken, die abhängig von jeder Situation eingesetzt werden. Das Nebenprodukt bei der Abtrennung von Wasser aus ölhaltigen Abwässern ist ein Schlamm (Ölschlamm), der reich an Öl, Tensiden und Partikeln ist. Der Ölschlamm enthält noch bedeutende Mengen an Wasser, die vor ihrer Entsorgung verwertet werden müssen. Die Verwendung von Polyelektrolyten zur Ausflockung des emulgierten Öls und seine Trennung von der wässrigen Phase ist in der Regel einer der Schritte zur Behandlung von Abwässern sowie ölhaltigen Schlämmen. Die Effizienz von Polyelektrolyten als Flockungsmittel wird ganz häufig über Versuch und Fehler bewertet, und das passende Polymer wird entsprechend dem jeweiligen Fall ausgewählt. Sogar in wissenschaftlichen Untersuchungen ist es eher üblich, industrielle Ölschlamm-Proben zu verwenden. Der industrielle Ölschlamm wird charakterisiert und mit Polyelektrolyten behandelt. Dennoch ist der industrielle Ölschlamm ziemlich kompliziert und variabel und muss durch ein Modell angenähert werden. Für die systematische Untersuchung der Effizienz von Polyelektrolyten als Flockungsmittel ist ein stabiles, realistisches und klar definiertes Ölschlamm-Modell notwendig. In der vorliegenden Arbeit wurde ein Ölschlamm-Modell erfolgreich entwickelt und charakterisiert. Das Modell besteht aus Wasser, Öl (Kerosin), Tensid (Natriumdodecylsulfat, SDS) und Tonteilchen (Blauton). Die Emulgiereffizienz des Tensids und des Tons wurden unabhängig voneinander untersucht. Die Wechselwirkungen zwischen dem Tensid und dem Ton, die sowohl die Adsorption des Ersteren auf dem Letzteren einschließen als auch einen Kationenaustausch, wurden untersucht. Die vier Komponenten des Ölschlamm-Modells wurden schließlich kombiniert und es wurde eine Reihe von Emulsionen hergestellt, bei denen die relativen Mengen der Emulsionsmittel verändert wurden, um eine möglichst hohe Stabilität zu erreichen. Nachdem ein geeignetes Ölschlamm-Modell zur Verfügung stand, wurde die Effizienz der verschiedenen Polyelektrolyte als Flockungsmittel bewertet. Kommerzielle natürliche (Chitosane), synthetische (PolyDADMACs) Polyelektrolyte und Oilbreaks sowie Labor-semi-synthetische Polymere (modifizierte Chitosane) wurden getestet. Die Flockungseffizienz wurde sowohl basierend auf der Menge und Qualität des Wassers, das zurückgewonnen wurde, als auch bezogen auf die Flockenstabilität, die Flockengröße und die Sedimentationsgeschwindigkeit bestimmt. Das zurückgewonnene Wasser wurde entsprechend der Vorschriften der Behörde für Umweltschutz (EPA) charakterisiert. Die Analysen enthielten die Bestimmung des gesamten organischen Kohlenstoffs (TOC), des chemischen Sauerstoffbedarf (CSB), des biochemischen Sauerstoffbedarfs (BSB5), des Gesamtgehalts an suspendierten Partikeln (TSS) und die Bestimmung des pH. Die Auswahl geeigneter Flockungsmittel hängt auch von der Art der gebildeten Flocken, in Kombination mit der Behandlung, die den Flockungsprozess folgt, ab. Wenn als Postflockungsprozess Filtration oder Zentrifugation folgen, sollten Polymere verwendet werden, die große und poröse Flöckchen bilden, wie im Fall der modifizierten Chitosane AG95 und AG97. Andererseits verlangen Geräte zur Klärung von Abwässern dichte Flocken, wie solche, die beim Einsatz von PolyDADMACs, kommerziellen Chitosanen, Oilbreaks und den modifizierten Chitosanen GA35, GA41 und AG79 entstehen. In Bezug auf die Wasserqualität erhält man mit einigen der verwendeten Polymere so niedrige Werte von CSB, TOC und BSB5, dass wie im Falle von P187K (PolyDADMAC) und GA41 (modifiziertes Chitosan) keine biologische Sekundärbehandlung notwendig ist. Im Falle der anderen Polymere ist eine biologische Behandlung nötig, um die vorgeschriebenen Grenzen zu erreichen. Die pH-Werte der modifizierten Chitosane (außer der AG97), der im Labor hergestellten PolyDADMACs und des Oilbreak OCAA sind alle in Bereich der vorgeschriebenen Grenzen. Die Anwendbarkeit von Biopolymeren als Flockungsmittel für die Ölschlammentwässerung ist ein relativ neuer Forschungsbereich. Als Folge der wachsenden Nachfrage nach umweltfreundlichen Technologien sowie erneuerbarer Ressourcen hat das Interesse an natürlichen Flockungsmitteln zugenommen. Das Aminopolysaccharidchitosan und dessen modifizierte Produkte haben hervorragende Eigenschaften wie Biokompatibilität, Biodegradierbarkeit, Hydrophilie, Adsorption, die Fähigkeit zur Flockung und antibakterielle Eigenschaften. Diese natürlichen Polymere, die aus Meeresfrüchte-Industrieabfallprodukten gewonnen werden, sollten als Restöl-Adsorbentien bei der Aufarbeitung jedes ölhaltigen Abwassers sehr nützlich sein und können zu den vielversprechendsten Kandidaten als Ersatz der synthetischen Flockungsmittel werden.