This thesis presents a method for parameter extraction of circuit elements from microwave filters. This diagnosis method can be applied to a sufficiently large number of filters and it can also be used in conjunction with a neural network model for filter design, greatly reducing development time. This thesis is an introduction of parameter extraction and circuit modelling through use of neural networks. It also presents an implementation of the proposed method as well as numerical results and validation data. Detailed implementation code is presented in the appendix.

The design of modern integrated circuits is overwhelmingly complicated due to the enormous number of cells in a typical modern circuit. To deal with this difficulty, the design procedure is broken down into a set of disjoint tasks. Circuit layout is the task that refers to the physical realization of a circuit from its functional description. In circuit layout, a connection-list called netlist of cells and nets is given. Placement and routing are subtasks associated with circuit layout and involve determining the geometric locations of the cells within the placement area and connecting cells sharing common nets. In performing the placement and the routing of the cells, minimum placement area, minimum delay and other performance constraints need to be observed. In this work, we propose and investigate new approaches to placement and routing problems. Specifically, for the placement subtask, we propose new convex programming formulations to estimate wirelength and force cells to spread within the placement area. As opposed to previous approaches, our approach is partitioning free and requires no hard constraints to achieve cell spreading within the placement area. The result of the global optimization of the new convex models is a global placement which is further improved using a Tabu search based iterative technique. The effectiveness, robustness and superiority of the approach are demonstrated on a set of nine benchmark industrial circuits. With regard to the routing subtask, we propose a hybrid methodology that combines Tabu search and Stochastic Evolution as a search engine in a new channel router. We also propose a new scheme based on Utility Theory for selecting and assigning nets to tracks in the channel. In this scheme, problem-domain information expressed in the form of utility functions is used to guide the search engine to explore the search space effectively. The effectiveness and robustness of the approach is demonstrated on five industrial benchmarks.

Ongoing efforts to quantify changes in quality of life attributable to low vision rehabilitation have focused on the utility of a single test instrument to measure this multidimensional concept. It is hypothesized that quality of life is best assessed using multiple instruments to capture some of its component facets, including functional status and psychosocial impact. Low vision devices have a predictably spontaneous impact on functional vision status, but associated psychosocial impact occurs with different magnitudes and over more protracted time intervals. The National Eye Institute Visual Function Questionnaire (NEI VFQ-25) measures the functional status of individuals in key vision areas that are associated with quality of life. The Psychosocial Impact of Assistive Devices Scale (PIADS) is an instrument that measures the psychosocial impact of assistive device intervention in three quality of life domains: competence, adaptability, and self-esteem. 68 participants were obtained from an ongoing parent study. These participants were recruited through the Low Vision Clinic at the University of Waterloo. They had a primary diagnosis of age-related macular degeneration (ARMD) and were obtaining a CCTV system for the first time. Assessments from the parent study used in this thesis included follow-up from 2 weeks, 1 month, 3 months, and 6 months post-adoption of the CCTV. The two tests administered were to measure functional vision status (NEI VFQ-25) and perceived psychosocial impact (PIADS), according the framework outlined by the Consortium for Assistive Technology Outcomes Research (CATOR). Multivariate repeated-measures ANVOA results confirmed that CCTV systems have an immediate and robust effect on the daily visual functioning of their users, and that this effect is stable over long periods of device use. The psychosocial impact of CCTV device use peaks in the shorter term and then seems to wane in the longer term for reasons that are not yet understood. The NEI VFQ-25 and the PIADS appear to have differential sensitivity to important influences on low vision rehabilitation outcomes. This project has demonstrated the value of longitudinal outcomes research in low vision rehabilitation. After obtaining a CCTV, visual function status remains static while psychosocial impact is dynamic during 6-months of follow-up.

Today’s advances in communication systems and VLSI circuits increases the performance requirements and complexity of circuits. The performance of RF and mixed-signal circuits is normally limited by the nonlinear behavior of the transistors used in the design. This makes simulation of nonlinear circuits more important. Volterra series is a method used for simulation of mildly nonlinear circuits. Using Volterra series the response of the nonlinear circuit is converted into a sum of multiple linear circuit responses. Thus, using Volterra series, simulation of nonlinear circuits in frequency-domain analysis becomes possible. However, Volterra series is not able to simulate strongly nonlinear circuits such as saturated Power Amplifiers. In this thesis, a new time-varying Volterra analysis is presented. The time-varying Volterra analysis is the generalization of conventional Volterra analysis where instead of using a DC expansion point a time-varying waveform has been used. Employing a time-varying expansion waveform for Volterra analysis, time-varying Volterra achieves better accuracy than conventional Volterra. The time-varying expansion waveforms are derived using a fast pre-analysis of the circuit. Using numerical examples, it has been shown that the time-varying Volterra is capable of simulating nonlinear circuits with better accuracy than conventional Volterra analysis. The time-varying Volterra analysis in both time and frequency domains are discussed in this thesis. The time-varying Volterra analysis has been used to simulate a saturated Class-F Power Amplifier in frequency-domain. The simulation results show good agreement with ELDO® steady-state and Harmonic Balance simulation results. The proposed method manages to simulate nonlinear circuits, such as saturated Power Amplifier, mixers and nonlinear microwave circuits, with good accuracy. Also, this method can be used to simulate circuit with large number of nonlinear elements without the convergence issues of Harmonic Balance.

Increasing demands for more reliability and functionalities in electronic devices have pushed the electronics industry to adopt newly developed materials and reduce interconnect sizes and spacing. These adaptations have led to concerns of reliability failures caused by conductive anodic filament formation (CAF). CAF is a conductive copper-containing salt that forms via an electrochemical process. It is initiated at the anode and grows along the epoxy/glass interface to the cathode, and once CAF reaches the cathode a short circuit will occur. The objective of this research is to evaluate and compare the effects of curing agents (DICY vs. phenolic-cured epoxy) and drilling methods (laser vs. mechanical drilling) on CAF formation using an insulation resistance test at 85 ºC, relative humidity of 85%, and a voltage gradient of 0.4V/µm. Time-to-failure for DICY-cured and phenolic-cured epoxy with laser drilled microvias and mechanically drilled vias were determined using the insulation resistance test. The failed coupons were cross-sectioned and examined using a Scanning Electron Microscope equipped with Energy-dispersive X-ray spectroscopy to verify the existence of CAF. Weibull analysis was used to compare the reliability and identify the failure modes of the failed coupons. Test results show that DICY-cured epoxy is a better CAF resistant material than phenolic-cured epoxy. It is believed that the brittleness of phenolic-cured material might enhance the damage to the epoxy/glass fiber interface during drilling; and hence, facilitate subsequent CAF formation. The study also shows that laser drilled microvias are less prone to CAF formation than mechanically drilled vias, because there is less mechanical damage and lower glass fiber content. Finally, using Weibull analysis, it is determined that laser drilled microvias experienced infant-mortality failure, whereas mechanically drilled vias exhibited a wear-out type failure.

No description available.

No description available.

This dissertation presents a wide-band lumped element equivalent circuit model and a building block-based scalable circuit model for multiple quantum well laser diodes. The wide-band multiple-resonance model expresses two important laser diode characteristics such as input reflection and electrical-to-optical transmission together. Additionally, it demonstrates good agreements with the measurement results of the selected commercial discrete laser diodes. The proposed building block-based modeling approach proves its validity using a numerically derived scalable rate equation. Since success in a circuit design depends largely on the availability of accurate device models, the practical application of the proposed models provides improved accuracy, simple implementation and a short design time.

A phased array antenna differs from a conventional antenna, such as a dish antenna, in that it coherently adds radiation from multiple radiating elements instead of mechanical positioning to direct RF energy. When transmitting and receiving information from a source while in motion, a phased array antenna can continuously adjust its signal to focus on the source. New antenna designs focus on integrating phased array antennas into the structure of the antenna platform, as advanced antenna platforms require the antenna to take up less and less real estate. With further development of phased array antennas, new designs become increasingly complex. The manufacturing techniques to facilitate the integration of complex antenna designs into the structure of an antenna platform must be developed, as traditional manufacturing operations, such as injection molding, machining and bulk deformation processes, are not well suited to create the small details and complex three dimensional lattice designs of the antennas. Innovative solutions need to be developed that allow the manufacture of complex antennas, thereby enabling testing to be performed on actual devices. The results from testing physical models can buttress analytical models and lead to better antenna designs. This work developed and studied suitable methods for manufacturing three-dimensional, structurally-integrated antennas.

Recently, the government makes good an environment and fully support to semiconductor industries from top to bottom covering the wafer foundry, IC design and equipment testing in Taiwan. Therefore, most of semiconductor brands which are very famous in the international. In early stages, Taiwanese electronic makers which were from OEM (Original Equipment Manufacturing, OEM) model to get resources, technologies and market information. They were became designers and have own R & D via the cooperation of international companies. And also got business form ODM (Original Design Manufacturing, ODM) to its own brand (Own Brand Manufacturing, OBM) direct management about the smile curve at both ends of the market to earn profits. In this study, Taiwan's IC design industry point of view of IC critical success factors of its own brand. In addition, to gathering in DC-FAN motor driving circuits in Taiwan. There are two related information of major leading brands for study. Through "qualitative research" in depth interviews of experts within the industry leader for the interview study, to find out its own brand of IC critical success factors. This research through the collation of expert interviews found that the market should impetus to fully service, increase innovative business models and strengthen integrated development of the semiconductor supply chains to get high techniques for next generation of products. And, to make good relationship with high position of customers that is critical success factors in its own brand. Moreover, it is a base of planning new products for the further. Hope, these findings could offer and give suggestion to industries as a reference. There is a model for reference when some one faces to similar situation.