No description available.

The analysis and design of bracing systems for complex frame geometries typically found in metal buildings can prove to be an arduous task given current methods. The American Institute of Steel Construction's Appendix 6 from the 2010 Specification for Structural Steel Buildings affords engineers a means for determining brace strength and stiffness requirements, but only for the most basic cases. Specifically, there are a number of aspects of metal building systems that place their designs outside the scope of AISC's Appendix 6 (Stability Bracing for Columns and Beams). Some of the aspects not considered by Appendix 6 include: the use of web-tapered members, the potential for unequally spaced or unequal stiffness bracing, combination of bracing types including panel and flange diagonal bracing, and the effects of continuity across brace points. In this research, an inelastic eigenvalue buckling procedure is developed for calculation of the ideal bracing stiffness demands in general framing systems. Additionally, the software provides a method of calculating the elastic lateral-torsional buckling load of members with generally stepped and tapered cross-sections, which satisfies an important need for rigorous design assessment. Extensive benchmarking to load-deflection simulations of geometrically imperfect systems is performed and recommendations are developed for determining the required design stiffness and strength of the bracing components based on the use of this type of computational tool.

No description available.

A compliant mechanism gains its motion from the deflection of flexible members or the deformation of one portion of materials with respect to other portions. Design and operation of compliant mechanisms are very important, as most of the natural objects are made of compliant materials mixed with rigid materials, such as the bird wings. The most serious problem with compliant mechanisms is their fatigue problem due to repeating deformation of materials in compliant mechanisms. This thesis presents a study on the computational framework for designing a compliant mechanism under fatigue strength control. The framework is based on the topology optimization technique especially ground structure approach (GSA) together with the Genetic Algorithm (GA) technique. The study presented in this thesis has led to the following conclusions: (1) It is feasible to incorporate fatigue strength control especially the stress-life method in the computational framework based on the GSA for designing compliant mechanisms and (2) The computer program can well implement the computational framework along with the general optimization model and the GA to solve the model. There are two main contributions resulting from this thesis: First one is provision of a computational model to design compliant mechanisms under fatigue strength control. This model also results in a minimum number of elements of the compliant mechanism in design, which means the least weight of mechanisms and least amount of materials. Second one is an experiment for the feasibility of implementing the model in the MATLAB environment which is widely used for engineering computation, which implies a wide applicability of the design system developed in this thesis.

A novel multiscale approach is introduced for determining the thermal conductivity of polymer nanocomposites (PNCs) reinforced with single-walled carbon nanotubes (SWCNTs), which accounts for their intrinsic uncertainties associated with dispersion, distribution, and morphology. Heterogeneities in PNCs on nanoscale are identified and quantified in a statistical sense, for the calculation of effective local properties. A finite element method computes the overall macroscale properties of PNCs in conjunction with the Monte Carlo simulations. This Monte Carlo Finite Element Approach (MCFEA) allows for acquiring the randomness in spatial distribution of the nanotubes throughout the composite. Furthermore, the proposed MCFEA utilizes the nanotube content, orientation, aspect ratio and diameter inferred from their statistical information. Local SWCNT volume or weight fractions are assigned to the finite elements (FEs), based on various spatial probability distributions. Multi-phase homogenization techniques are applied to each FE to calculate the local thermal conductivities. Then, the Monte Carlo simulations provide the statistics on the overall thermal conductivity of the PNCs. Subsequently, dispersion characteristics of the nanotubes are assessed by incorporating nanotube agglomerates. In this regard, a multi-phase homogenization method is developed for enhanced accuracy and effectiveness. The effect of the nanotube orientation in a polymer is studied for the cases where the SWCNTs are randomly oriented as well as longitudinally aligned. The influence of voids existing in the polymer is investigated on the thermal conductivity, to capture the uncertainties in PNCs more extensively. Further, a unique damage evaluation model is proposed to assess the degradation of PNCs when subjected to thermal cycling. The growth in void content is represented with a Weibull-based equation, to quantify the deterioration of the thermal and mechanical properties of PNCs under thermal fatigue. In addition, the MCFEA considers the interface resistance of the carbon nanotubes as one of the key factors in the thermal conductivity of nanocomposites. Parametric studies are performed comprehensively. The numerical results obtained are compared with available analytical techniques at hand and with the data from pertinent independent experimental studies. It is found that the proposed MCFEA is capable of estimating the thermal conductivity with good accuracy.

In this master thesis the connection between the two major parts of an osseointegrated prosthesis system for lower limb amputees has been investigated by finite element (FE) analysis. The prosthesis system is developed by Integrum and the current design consists of a fixture, which is integrated in the residual bone, an abutment that penetrates the skin and an abutment screw that holds the parts together. The connection between the fixture and the abutment has a hexagonal section and a press-fit section that together form the connection. Due to wear and fracture problems it is desired to improve the connection. A tapered connection could be an alternative and three different taper angles, the effect of the length of the taper and the smoothness of the outer edge of a tapered fixture have been investigated. The results show that the taper has potential to function well and that a longer connection will give lower stresses in the system, but further investigations are needed.

The goal in this thesis was to reduce a multilayer shim model, which was modeled from steel and polymer (isotropic materials), into an equivalent single layer shim model. The procedure was to use mathematical formulations to convert a multilayer shim into an ESL (equivalent single layer) shim. Here, a transverse isotropic model is used to prepare for future orthotropic layers. The results show that the ESL model behaves isotropically. In the 2 layer model there was no squeal noise whereas in the ESL models there is.

Infrared (IR) imaging is a key technology in a variety of military and civilian applications, especially for night vision and remote sensing. Compared with cryogenically cooled IR sensors, uncooled infrared imaging devices have the advantages of being low cost, light weight, and superior reliability. The electro-thermal analysis of a microbolometer pixel is critical to determine both device performance and reliability. To date, most microbolometer analysis research has focused on performance optimization and computation of thermal conductance directly from the geometry. However, modeling of the thermal distribution across the microbolometer pixel is critical for the comprehensive analysis of system performance and reliability. Therefore, this thesis investigates the electro-thermo-mechanical characteristics of a microbolometer pixel considering the effects of joule heating and incoming IR energy. The contributions of the present research include the electro-thermal models for microbolometer and methods of validating thermal distribution using experimental results. The electro-thermal models explain the effect of microbolometer material properties and geometry on device performance and reliability. The research also contributes methods of estimating the thermal conductivity of microbolometer, which take into account different heat transfer mechanisms, including radiation and convection. Previous approaches for estimating the thermal conductance of uncooled microbolometer consider heat conduction via legs from the geometry of the pixel structure and material properties [2]. This approach assumes linear temperature distribution in the pixel legs structure. It also leaves out the various electro-thermal effects existing for multilayer structures. In the present research, a different approach is used to develop the thermal conductance of microbolometer pixel structure. The temperature distribution in the pixel is computed from an electro-thermal model. Then, the average temperature in the pixel microplate and the total heat energy generated by joule heating is utilized to compute the thermal conductance of the structure. The thesis discusses electro-thermal and thermo-mechanical modeling, simulation and testing of Polysilicon Multi-User MEMS Process (PolyMUMPs®) test devices as the groundwork for the investigation of microbolometer performance and reliability in space applications. An electro-thermal analytical and numerical model was developed to predict the temperature distribution across the microbolometer pixel by solving the second order differential heat equation. To provide a qualitative insight of the effect of different parameters in the thermal distribution, including material properties and device geometry, first an explicit formulation for the solution of the electro-thermal coupling is obtained using the analytical method. In addition, the electro-thermal model, which accounts for the effect of IR energy and radiation heat transfer, spreading resistance and transient conditions, was studied using numerical methods. In addition, an analytical model has been developed to compute the IR absorption coefficient of a Thin Single Stage (TSS) microbolometer pixel. The simulation result of this model was used to compute absorbed IR energy for the numerical model. Subsequently, the temperature distribution calculated from the analytical model is used to obtain the deflections that the structure undergoes, which will be fundamental for the reliability analysis of the device. Finite element analysis (FEA) has been simulated for the selected device using commercial software, ANSYS® multiphysics. Finite element simulation shows that the electro-thermal models predict the temperature distribution across a microbolometer pixel at steady-state conditions within 2.3% difference from the analytical model. The analytical and numerical models are also simulated and results for a temperature distribution within 1.6% difference. In addition, to validate the analytical and numerical electro-thermal and thermo-mechanical models, a PolyMUMPs® test device has been used. The test results showed a close agreement with the FEM simulation deflection of the test device.

Diffraction Enhanced X-ray Imaging (DEI) uses synchrotron X-ray beams prepared and analyzed by perfect single crystals to achieve imaging contrast from a number of phenomena taking place in an object under investigation. The crystals used in DEI for imaging requires high precision positioning due to a narrow rocking curve. Typically, the angular precision required should be on the order of tens of nanoradians.<p>One of the problems associated with DEI is the inability to control, set, and fix the angle of the analyzer crystal in relation to the beam exiting the monochromator in the system. This angle is used to interpret the images acquired with an object present and the usual approach is to determine where the image was taken after the fact. If the angle is not correct, then the image is wasted and has to be retaken. If time or dose is not an issue, then retaking the image is not a serious problem. However, since the technique is to be developed for live animal or eventually human imaging, the lost images are no longer acceptable from either X-ray exposure or time perspectives.<p>Therefore, a mechanical positioning system for the DEI system should be developed that allows a precise setting and measurement of the analyzer crystal angles. In this thesis, the fundamental principles of the DEI method, the DEI system at the National Synchrotron Light Source (NSLS) and the sensitivity of the DEI system to vibration and temperature has been briefly studied to gain a better understanding of the problem. The DEI design at the NSLS was analyzed using finite element analysis software (ANSYS) to determine the defects in the current design which were making the system dimensionally unstable. Using the results of this analysis, the new analyzer support was designed aiming to eliminate the problems with the current design. The new design is much stiffer with the natural frequency spectrum raised about eight times. <p> This new design will improve the performance of the system at the National Synchrotron Light Source (NSLS) of Brookhaven National Laboratory, New York, USA and should assist in the development of a new DEI system for the Bio-Medical Imaging and Therapy (BMIT) beamline at the Canadian Light Source (CLS), Saskatoon, CANADA.

The bottleneck of forming small radius tube is that traditional processing methods can¡¦t effectively produce smaller bend radius tube in domestic industry now. First, this study will propose methods without mandrel, based on traditional bending way of rotary draw bending to form small bending radius tubes. This paper investigate results of traditional bending mode without mandrel in second part. By using finite element analysis, find the effects on wall-thinning, wall-thickening and ovility with different processing parameters. Also using the research results to obtain forming ranges. Through heating tubes we explore the possibility of hot forming of parameters and to find the impacts on bending tubes which heating under different parameters. We use the results above to find out the hot forming ranges. In heating and quenching of rotary draw bending experiments, we found that heating tubes under the same processing parameter can effectively enhance the formability and successfully derive better products of small radius bending tubes, to accomplish non-mandrel rotary bending process of small bending radius.