The thesis called Block of Flats in Prague 6 is composed as a project documentation of the static part. This six-level building was designed as a ferroconcrete monolithic object. Two underground floors are formed by a ferroconcrete frame with columns. There are placed parking slots and also a residential section on these two floors. Four other levels are designed as a ferroconcrete frame with walls. These four floors serve as a residential section. The thesis deals with the complete design of the first floor of one structural unit of the building, and also with some details such as floor slab, bearers, staircase, columns, and walls.

Design of heating of the house with almost zero energy consumption. The first part describes the analysis of the building and heating, heat pumps theory and evaluation systems with heat pump.In the second part we find three variants of technical solutions. The third part contains solutions for selected variant and it is heating with heat pump air – water.

The thesis is a technical solution for heating two apartment buildings. The project is designed in two versions. The first variant is source of heat boilers for pellets, in the second variant, the heat source heat pumps type of land / water. Part of this work is an experiment which deals with the measurement of floor heating.

Master’s thesis describes project documentation of a multifunctional house in Velké Meziříčí. It is the four storey basementless detached house. There are two shops, cafe and flat facilities on the first floor and 10 flats on the other 3 floors. The brick-built building consists of Diton and Heluz brickwork system insulated with Baumit external thermal insulation system. The house is covered by single ply roofing.

The apartment building is located in Brno, Vojtova street. It´s a building with four overground floors and one underground floor, which is mainly used as collective garage. As a structural system is used reinforced concrete skeleton. The building has a single-layer flat roof.

The thesis subject deals with processing of documentation of new boarding house in the Eagle Mountains. The boarding house is free-standing building with a cellar and aboveground three floors situated in sloping terrain. The boarding house is covered by gabled roof. A restaurant with background is projected in the first floor. In the second and the third floor double and triple rooms are situated. Total number of beds comes to thirty five. After finishing the house construction, the area will be put into original state, vegetation will be restored and new trees are going to be planted out. The access to building is from the south for the public and from the north for the staff. For movement of handicapped people with reduced movement ability the paved areas are designed and placed in front of the object.

The object of interest of this diploma thesis is the processing of technical-construction part of the project documentation for the realization of the four-storey office building with two commercial premises on the ground floor. The building is cellarless, shape of the ground plan is rectangular. The fourth floor is receded over the others and there is an outdoor terrace, facing south, the remaining part of fourth floor is made up of flat vegetation roof. The support system is composed of steel concrete skeleton with a reinforcing core. Infill walling are made of ceramic fittings. The building is insulated with mineral wool and ceramic facade system.

This thesis deals with the project documentation of the accommodation facility. Specifically, it is a guest house situated at the outskirts of Blansko – Ceskovice. Guest house kapacity is 22 beds and 50 seated restaurant. The object is designed as a three-floor with a partial basement. Basement floor will consist of storage, utility room and squash court. In the first floor is located main entrance, reception desk and restaurant with facilities. In the second floor are rooms for guests. The building is walled with saddle roof.

The subject of this thesis is the design documentation for three floor object with basement. Object art school includes a concert hall. The object is located in Zábřeh and will be built in existing buildings in the city center. The building will be used for teaching and training of 500 pupils, the concert hall is for 100 visitors and 30 performers. In the basement there is a technical background - boiler room and utility room, dancing hall with accessories and several classrooms. On the first floor there is room for ventilation, facilities for pupils and their parents, dressing room, classroom for orchestr, which includes a recording studio, classroom for drums and several classrooms for the solo instrument. The Concert Hall is also located on first floor and is divided into two parts. Part for visitors, where is located treasury, foyer, dressing room and concert hall. In the part for performers are separate changing rooms and kitchen. The second floor is partially defined by the school management - there are director's office, secretariat, staff room, day room for teachers and classrooms. The third floor will serve particularly dramatic and visual department, there will be six classrooms for solo instrument or singing. Art School has three main entrances - entry to school, entrance to the concert hall for visitors and a separate one for acting. Facilities for performers is connected to the testing orchestral playing. The land is gently sloping toward the southeast. In all parts of the school will be shed roof with slight slope.

The presented work deals with research in the field of sulfate binders on the anhydrite base. Conceptually, it is divided into a general theory of sulfate binders and anhydrite mortar compounds, which is describing in detail the using of anhydrite mortar compounds on the poured floor screeds, and then the experimental part, where is made the mineralogical analysis of seven different gypsum resources and subsequent is monitored the effect of two sulfate exciters on the achieved technological properties and hydration process.