Deployable structures have made an immense impact in the engineering world. The concept of the deployable structure has been able to reduce costs and sizing limits across a variety of use cases. However, sizing and cost reduction are not the only reasons that deployable structures are prominent. There are unique propeller blades that have entered into the world of deployable structures, where the ability to be stowed away and deployed to a much larger diameter can increase launch flexibility, and the engine efficiencies of aircraft. Although, most of the deployable propeller blades that have been designed in studies have the usual hinge mechanism where the down side of a hinge is that it does not necessarily provide any stiffness nor does it change the diameter of the propeller blade when stowed away. However, an unique strategy, that uses the underlying principle of snap through buckling can help to negate the use of hinges. This principle allows the propeller blade itself to be folded and stowed away, where stored strain energy is used in order to self-deploy back into the original shape. This paper will present an overall approach to the structural architecture development, conceptual prototype fabrication, and computational analysis of a foldable propeller blade.

Lightweight aerospace structures have been sought after since humans took flight in 1903, making major strides in NASA's pursuit of the moon with the development of sandwich panel composites. Sandwich structures typically consist of two stiff phases (i.e., face sheets) separated by a lightweight phase (i.e., core), which are stacked together through adhesive layers. Such a structural arrangement provides a high stiffness-to-weight ratio and is often used in applications where weight saving is critical. Functionally Graded Materials (FGMs), refer to multifunctional materials, which contain a spatial variation of composition and/or microstructure for the specific purpose of altering thermal and structural properties. Recent advancements in Additive Manufacturing (AM), or 3D printing, drastically increased research capabilities. This thesis poses two novel concepts. First, sandwich beams manufactured as a single unit through additive manufacturing, eliminates the need for secondary bonding used in traditional sandwich structures. Second, with the introduction of a Functionally Graded (FG) core, sandwich structures offer enhanced flexural stiffness-to-weight ratio. To test these hypotheses, the design space of sandwich beams with FG cores is analytically explored by forming governing equations from existing methods and developing specific FG performance parameters. These equations are then exploited in MATLAB to map variation of the sandwich beam stiffness-to-weight ratio as a function of core relative density. Analytical estimations are verified for a particular design point of variable core density using the Finite Element (FE) models developed in the commercial FE program ABAQUS. Both the analytical and numerical results reveal a performance increase of approximately 31% of the stiffness-to-weight ratio for a variable core density. Finally, the selected design is additively manufactured using a poly-jet printer (Stratasys J55). The flexural modulus and strength of the additively manufactured sandwich beams are measured by the three-point bend test method. The experimental results clearly match the analytical and numerical estimations.

This study investigated the application of a polyelectrolyte (PE)-assisted metallic iron nanoparticle-integrated forward osmosis (FO) membrane to treat synthetic spacecraft wastewater comprising urea, ammonium carbonate, and linear alkylbenzene sulfonate (LAS). The draw solution (MgSO4) diluted via the FO operation was further treated using a nanofiltration (NF) membrane aimed at producing potable quality water by the FO-NF hybrid process. A cellulose triacetate FO membrane was functionalized by layer-by-layer deposition of polyallylamine hydrochloride (PAH) and polyacrylic acid (PAA) followed by incorporating zero valent iron nanoparticles (ZVINP) within the "bilayers". It required 14 bilayers to ensure a uniform coating as demonstrated via scanning electron microscopy image examination. The PE modification of the FO membrane counteracted the effects of membrane fouling and internal concentration polarization. Although the modified membrane appeared to accumulate slightly more foulants than the unmodified membrane, the modified membrane demonstrated higher water flux. After 10 hours of the FO operation, the water flux of the unmodified membrane observed a decreased while the modified membranes FS remained constant throughout. The reverse salt flux of the unmodified membrane was higher than the functionalized membrane. The RSF of the unmodified membrane increased while the modified membranes results remained constant throughout the process. The higher water flux of the functionalized membrane can be attributed to the deposition of PE-ZVINP that may have reduced the effects of ICP and RSF. The performance of the FO-NF hybrid process was evaluated by comparing the removal of nitrogen (TN) and total organic carbon (TOC) from the wastewater using a bench-scale setup. When using the modified FO membrane, the system removed 85.6% of TN and 86.2% TOC. This hybrid FO-NF system is expected to reduce the overall energy input and membrane operation cost when treating various wastewaters including the spacecraft wastewater.

Este trabalho busca contribuir no debate acerca dos movimentos sociais, especificamente no do movimento de moradia. Oferece uma análise das dinâmicas estatais de desenvolvimento das políticas e produções habitacionais em três esferas de governo: o Governo Federal, o Governo Estadual paulista, e a Prefeitura Municipal de São Paulo. O estudo aborda a atuação destes níveis de governo desde suas origens até 2002. Ele analisa os diferentes períodos do desenvolvimento desta atuação, examinando os modelos habitacionais que os caracterizaram. Esta análise focou-se na variação da distribuição das atividades fundamentais, à produção habitacional financiada por fundos públicos, presente nos diferentes programas habitacionais realizados ao longo do tempo. Assim ela procurou identificar as continuidades e descontinuidades da ação estatal. Expõe desta forma as preferências demonstradas pelo Estado em sua ação. Isto permitiu delinear o papel do movimento de moradia em alguns dos modelos habitacionais surgidos desde a Nova República. / This study intends to contribute to debate of social movements which gather dwellings. It approaches an analysis on State-oriented dynamics to develop policies and dwellings production into three branches of government: Federal, local State of São Paulo and São Paulo county level. The policies and action of these three levels are made accessible from its origins to 2002. An effort to analysis of different moments into the process of the public action is made. The models for habitation produce are under examination. The approach focuses changes in the distribution from the basic actions up to habitation produce financed by public funds. This has been found in different dwelling programs produced through all the time. The analysis attempts to identify continuities and discontinuities into the public action. It exposes by this way the preferences shown by the State performance. Such an approach allowed to outline the role of the gather dwellings movement in some of the habitation produce models that were developed since the New Republic arrival

Este trabalho busca contribuir no debate acerca dos movimentos sociais, especificamente no do movimento de moradia. Oferece uma análise das dinâmicas estatais de desenvolvimento das políticas e produções habitacionais em três esferas de governo: o Governo Federal, o Governo Estadual paulista, e a Prefeitura Municipal de São Paulo. O estudo aborda a atuação destes níveis de governo desde suas origens até 2002. Ele analisa os diferentes períodos do desenvolvimento desta atuação, examinando os modelos habitacionais que os caracterizaram. Esta análise focou-se na variação da distribuição das atividades fundamentais, à produção habitacional financiada por fundos públicos, presente nos diferentes programas habitacionais realizados ao longo do tempo. Assim ela procurou identificar as continuidades e descontinuidades da ação estatal. Expõe desta forma as preferências demonstradas pelo Estado em sua ação. Isto permitiu delinear o papel do movimento de moradia em alguns dos modelos habitacionais surgidos desde a Nova República. / This study intends to contribute to debate of social movements which gather dwellings. It approaches an analysis on State-oriented dynamics to develop policies and dwellings production into three branches of government: Federal, local State of São Paulo and São Paulo county level. The policies and action of these three levels are made accessible from its origins to 2002. An effort to analysis of different moments into the process of the public action is made. The models for habitation produce are under examination. The approach focuses changes in the distribution from the basic actions up to habitation produce financed by public funds. This has been found in different dwelling programs produced through all the time. The analysis attempts to identify continuities and discontinuities into the public action. It exposes by this way the preferences shown by the State performance. Such an approach allowed to outline the role of the gather dwellings movement in some of the habitation produce models that were developed since the New Republic arrival

A dissertação orientou-se em parte no aspecto conceitual da Análise da Tarefa procurando detalhar uma seqüência lógica desde seu surgimento, evolução, enfim, indo até sua aplicação nos projetos arquitetônicos. Esta seqüência exprime de forma global o teor do trabalho, procurando demonstrar uma afinidade entre a análise da tarefa e as funções e atividades na habitação. A dissertação apresenta um conjunto de seis técnicas de utilização da análise da tarefa de forma descritiva e fazendo referência a utilização da mesma, onde todas foram tabuladas e oferecidas em seqüência indicando a técnica empregada em um conjunto lógico de informações. Dando continuidade a esse conjunto de técnicas e buscando formar uma seqüência de pensamento foram apresentadas algumas teorias cientificas da administração do trabalho que tiveram inicialmente seus primeiros estudos nos ambientes das fábricas. A divisão do trabalho e os primeiros estudos relacionados à interação do homem e o seu ambiente de trabalho orientados pela ergonomia como ciência fornecem subsídios importantes para a arquitetura funcionalista do século XX, que é apresentada nesta dissertação em períodos designados como: primeira, segunda e terceira ondas. As funções e as atividades domésticas têm influência no dimensionamento do projeto e da habitação por isso passam a ser estudadas cientificamente por alguns pesquisadores. O objetivo da dissertação é apresentar um acervo de informações técnicas consagradas de padrões projetuais ergonômicos densamente embasados nas referências bibliográficas e de estudos das funções e atividades dos autores: J. J. Boueri, J. B. Pedro, Normas Suecas e do Ministério do Trabalho e da Habitação de Israel. / The dissertation was guided partly in the conceptual aspect of the Analysis of the Task trying to detail a logical sequence from her appearance, evolution, finally, going until her application in the architectural projects. This sequence expresses in a global way the tenor of the work, trying to demonstrate a likeness between the analysis of the task and the functions and activities in the house. The dissertation presents a group of six techniques of use of the analysis of the task in a descriptive way and making reference the use of the same, where all were tabulated and offered in sequence indicating the employed technique in a logical group of information. Giving continuity to that group of techniques and looking for to form a thought sequence some was presented theories inform of the administration of the work that you/they had their first studies initially in the atmospheres of the factories. The division of the work and the first studies related to the man\'s interaction and his/her working environment guided by the ergonomics as science supplies important subsidies for the architecture functional of the century XX, that is presented in this dissertation in periods designated as: first, second and third waves. The functions and the domestic activities have influence in the dimensioning of the project and of the house for that pass to be studied scientifically by some researchers. The objective of the dissertation is to present a collection of consecrated technical information of patterns ergonomic projetuais densely based in the bibliographical references and of studies of the functions and the authors\' activities: J. J. Boueri, J. B. Pedro, Swedish Norms and of Department of Labor and of the House of Israel.

Partindo-se da hipótese da necessidade de haver uma relação entre o atual projeto de moradia e os hábitos domésticos contemporâneos, o objetivo deste trabalho é investigar o projeto de espaços habitáveis de apartamentos em São Paulo, avaliando-se a compatibilidade entre sua configuração tipológica e as transformações do uso da habitação, ocorridas nas últimas décadas do século 20 – aqui observadas a dinâmica e contínua alteração tipológica dos arranjos familiares e a invasão de novas tecnologias ao espaço doméstico. Constituindo-se uma tentativa de colaboração para o repensar do habitar metropolitano contemporâneo, esta dissertação está estruturada em quatro capítulos. O primeiro constitui-se de uma ambientação histórica do processo de modernização da indústria brasileira, englobando o início da cultura de habitar apartamentos na cidade de São Paulo, até a cristalização desse hábito, nas últimas décadas do século 20. Estabelece-se aí um paralelo entre a relação do usuário com sua moradia e a introdução de progressos tecnológicos no cotidiano doméstico. No segundo capítulo visitam-se as transformações dos modos de vida contemporâneos, dadas em função tanto das mudanças dos grupos domésticos, as quais passaram a alterar o conceito tradicional de família nuclear, quanto da invasão de novas tecnologias ao ambiente doméstico. O terceiro capítulo – etapa essencial deste trabalho – constitui-se do estudo de plantas de apartamentos de dois dormitórios lançados na Região Metroplitana de São Paulo nas décadas de 1980 e 1990 e do estudo de caso de apartamentos de dois dormitórios de um edifício situado na cidade de São Paulo, com a análise dos espaços habitados e dos diversos usos a eles atribuídos. Partindo-se do quarto capítulo, no qual se estabelecem reflexões sobre novas tendências de desenhos para o modelo do espaço habitável, este voltado à contemporaneidade urbana, estabelecem-se duas constatações básicas: Por um lado, diante das transformações dos grupos domésticos e do largo uso de novos aparatos tecnológicos no espaço da habitação, a produção de apartamentos do final do século 20 apresenta-se em descompasso com a diversidade dos novos modos de morar adquiridos, caracterizando-se por certa morosidade quanto ao surgimento de novas propostas que contemplem a variedade de perfis dos atuais grupos de usuários urbanos. Por outro lado, é definida como apenas relativa a contemporaneidade identificada no uso dos apartamentos, uma vez que antigas tradições ainda permanecem na produção do ambiente doméstico, não tendo sido totalmente substituídas pelos novos modos de viver contemporâneos. / Based on the hypothesis that there should be a close relation between today’s private-home design and the current habits of people living in those homes, this work sets out to investigate the design of the living space of apartments in São Paulo, Brazil. The objective is to analyze how well this design has kept up with changing lifestyles during the last decades of the 20th century, in especial shifting family arrangements and the permeation of new technologies in the home. This work intents to contribute towards a new assessment of contemporary metropolitan living and is divided into four chapters. The first presents a background of the modernization process of Brazilian industry, covering from the inception of apartment life in São Paulo to its widespread acceptance. This part also draws a parallel between this process and the user-home relationship, in light of the introduction of the first technological gadgets in everyday home living. The second chapter shows today’s changing ways of living, brought by both emerging demographic patterns, which have dramatically changed the conventional nuclear family, and the flood of new technologies in the domestic environment. The third chapter – an essential part of this work – analyzes floor plans of two-bedroom apartments launched in São Paulo during the 80s and 90s. It also includes a case study of two-bedroom apartments of a São Paulo building, with an examination of their living spaces and the use attributed thereto. The fourth chapter brings some reflections on current ideas on the reconfiguring domestic landscape and arrives at two basic conclusions. On the one hand, in light of shifting family patterns and the permeation of technological appliances in the domestic space, it can be said that there is a clear gap between apartments produced in the late 20th century and the new lifestyles incorporated by the users of such homes. Scarce new proposals have addressed the multiple facets of today’s metropolitan apartment dwellers. On the other hand, the use given to these apartments can be considered only relatively contemporary, since ingrained traditions are still quite present in the living space and have not been fully replaced by contemporary lifestyles.

A dissertação orientou-se em parte no aspecto conceitual da Análise da Tarefa procurando detalhar uma seqüência lógica desde seu surgimento, evolução, enfim, indo até sua aplicação nos projetos arquitetônicos. Esta seqüência exprime de forma global o teor do trabalho, procurando demonstrar uma afinidade entre a análise da tarefa e as funções e atividades na habitação. A dissertação apresenta um conjunto de seis técnicas de utilização da análise da tarefa de forma descritiva e fazendo referência a utilização da mesma, onde todas foram tabuladas e oferecidas em seqüência indicando a técnica empregada em um conjunto lógico de informações. Dando continuidade a esse conjunto de técnicas e buscando formar uma seqüência de pensamento foram apresentadas algumas teorias cientificas da administração do trabalho que tiveram inicialmente seus primeiros estudos nos ambientes das fábricas. A divisão do trabalho e os primeiros estudos relacionados à interação do homem e o seu ambiente de trabalho orientados pela ergonomia como ciência fornecem subsídios importantes para a arquitetura funcionalista do século XX, que é apresentada nesta dissertação em períodos designados como: primeira, segunda e terceira ondas. As funções e as atividades domésticas têm influência no dimensionamento do projeto e da habitação por isso passam a ser estudadas cientificamente por alguns pesquisadores. O objetivo da dissertação é apresentar um acervo de informações técnicas consagradas de padrões projetuais ergonômicos densamente embasados nas referências bibliográficas e de estudos das funções e atividades dos autores: J. J. Boueri, J. B. Pedro, Normas Suecas e do Ministério do Trabalho e da Habitação de Israel. / The dissertation was guided partly in the conceptual aspect of the Analysis of the Task trying to detail a logical sequence from her appearance, evolution, finally, going until her application in the architectural projects. This sequence expresses in a global way the tenor of the work, trying to demonstrate a likeness between the analysis of the task and the functions and activities in the house. The dissertation presents a group of six techniques of use of the analysis of the task in a descriptive way and making reference the use of the same, where all were tabulated and offered in sequence indicating the employed technique in a logical group of information. Giving continuity to that group of techniques and looking for to form a thought sequence some was presented theories inform of the administration of the work that you/they had their first studies initially in the atmospheres of the factories. The division of the work and the first studies related to the man\'s interaction and his/her working environment guided by the ergonomics as science supplies important subsidies for the architecture functional of the century XX, that is presented in this dissertation in periods designated as: first, second and third waves. The functions and the domestic activities have influence in the dimensioning of the project and of the house for that pass to be studied scientifically by some researchers. The objective of the dissertation is to present a collection of consecrated technical information of patterns ergonomic projetuais densely based in the bibliographical references and of studies of the functions and the authors\' activities: J. J. Boueri, J. B. Pedro, Swedish Norms and of Department of Labor and of the House of Israel.

Essentielle au développement de la civilisation pharaonique, l’eau a surtout été étudiée au travers de la place qu’elle occupe dans la religion mais rarement au travers de ses usages dans la vie quotidienne. Ainsi les aménagements hydrauliques ne sont-ils généralement que très brièvement mentionnés dans la littérature égyptologique. À partir des données fournies par l’archéologie (matériaux, modes de construction, etc.), cette thèse a donc pour premier objectif d’étudier dans le détail ces installations en s’appuyant sur un corpus qui recense, pour toute la période pharaonique, près de 400 structures, classées en quatre grandes catégories : puits, canalisations, bassins et aménagements sanitaires. Dans un second temps, cette analyse approfondie complétée d’un travail de synthèse, qui replace chacune de ces installations dans son contexte tout en les confrontant simultanément aux sources écrites et iconographiques, permet plus largement de comprendre comment l’eau s’intégrait dans la vie des Égyptiens. La présence ou l’absence de ces structures dans les maisons et plus largement dans l’agglomération reflète ainsi les besoins des habitants et les difficultés auxquelles il fallait faire face. Les installations hydrauliques se révèlent donc être une source d’informations à ne pas négliger puisqu’elles permettent d’appréhender sous un jour nouveau la ville pharaonique et la façon dont on y vit tout en dévoilant certains aspects de la société égyptienne. / Essential in the development of Pharaonic civilization, water was especially studied through the place it occupies in the religion but rarely through its everyday use. Generally, hydraulic layouts are thus only briefly mentioned in Egyptological literature. From the data supplied by archaeology (materials, construction methods, etc.), this thesis thus has for first objective to study these installations in detail by relying on a corpus which lists, for the whole Pharaonic period, more than 400 structures, classified in four categories: wells, pipes, ponds and sanitary layouts. In a second hand, this detailed analysis, completed by a synthesis work replacing each of these installations in its context while confronting them simultaneously with written and iconographic sources, allows more widely to understand how water became integrated into Egyptians life. The presence or absence of these structures in houses and more widely in town thus reflects the inhabitant’s needs and the difficulties they were facing. Hydraulic layouts therefore appear to be a source of information not to be neglected for they cast new light on the Pharaonic city and its way of life while revealing certain aspects of the Egyptian society.

Submitted by STEFANO ROCHA DA CRUZ null (stefrcruz@hotmail.com) on 2016-04-13T17:38:11Z No. of bitstreams: 1 Dissertação de mestrado.pdf: 7064284 bytes, checksum: 264b5a62dbaaeb5e0e8adf44be5a6dc9 (MD5) / Approved for entry into archive by Felipe Augusto Arakaki (arakaki@reitoria.unesp.br) on 2016-04-15T14:51:57Z (GMT) No. of bitstreams: 1 cruz_sr_me_fran.pdf: 7064284 bytes, checksum: 264b5a62dbaaeb5e0e8adf44be5a6dc9 (MD5) / Made available in DSpace on 2016-04-15T14:51:57Z (GMT). No. of bitstreams: 1 cruz_sr_me_fran.pdf: 7064284 bytes, checksum: 264b5a62dbaaeb5e0e8adf44be5a6dc9 (MD5) Previous issue date: 2016-03-07 / Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) / Uma das múltiplas discussões em termos do papel do Estado enquanto formulador de políticas públicas gira em torno da perspectiva do desenvolvimento urbano e sua articulação com o planejamento habitacional de interesse social. Objetiva-se analisar de forma comparativa programas habitacionais vigentes na cidade de Franca/SP/ Brasil e cidade da Praia/Santiago/Cabo Verde, com foco nas convergências e discrepâncias. O plano habitacional brasileiro Minha Casa Minha Vida -MCMV se tornou um exemplo internacional ao passo que o programa cabo-verdiano Casa Para Todos - CPT foi formulado a partir de orientação técnica advinda da cooperação internacional com o Brasil. Propõe-se uma avaliação de resultados de desempenho, impactos e efeitos a partir de uma metodologia comparativa que analisa quantidade de unidades produzidas, número de famílias atendidas, localização e distância do centro principal da cidade e das áreas de emprego, infraestrutura e equipamentos públicos fornecidos, faixas de renda atendidas, valores das prestações mensais, custos das obras, tempo de construção e contrapartidas. Através de análises no campo das políticas públicas de cooperação internacional, habitação social, planejamento e ordenamento territorial urbano, utilizando pesquisa documental e abordagens de atores direta ou indiretamente envolvidos (governos, empresas, usuários, etc.), busca-se refletir acerca das deficiências atuais no setor em termos de qualidade e alcance social dos serviços e obter indicadores de desempenho que sejam úteis ao seu aperfeiçoamento. / One of the many discussions in terms of the State's role as a formulator of public policy it is about the urban development perspective and the articulation with the planning of social interest housing. The objective is to analyze comparatively housing programs in force in the city of Franca/SP/Brazil and Praia/Santiago/Cape Verde, focusing on the similarities and discrepancies. The Brazilian housing plan “my home, my life” became an international example while the Cape Verdean program “house for all”, was formulated from arising technical guidance of international cooperation with Brazil. We propose a performance evaluation results, impacts and effects from a comparative methodology which analyzes the amount of units produced, number of families served, location and distance from the main city center and areas of employment, infrastructure and public facilities provided , met income brackets, required monthly payments, engineering costs, construction time and counterparties. Through analysis of public policies in the field of international cooperation, social housing, urban planning and land use planning, using documentary research and approaches of actors directly or indirectly involved (governments, companies, users, etc.), seek to reflect on the shortcomings current in the industry in terms of quality and reach of social services and get performance indicators that are useful to its improvement. / FAPESP: 2014/23875