<p>This thesis contains three papers investigating problems of interest for noise control in ducts.</p><p>The first part of this thesis treats the sound propagation in rectangular ducts with flexible walls. Various experimental techniques are performed to measure the internal sound propagation and radiation to the surrounding. An analytical model is derived to calculate the coupled propagation wavenumber and radiated sound power. The two-port formalism is used.</p><p>The second part starts with the sound propagation in open ended circular straight pipe with airflow (a tailpipe). Various aspects such as: acoustic damping, reflection and transmission at the open termination are investigated. Sound absorption due to vorticity shed at the opening is also treated. The geometry of the opening is then modified (oblique cuts, diffusers) and comparisons with the reference straight pipe is made for the sound transmission and flow induced noise generation. The effect of an upstream bend close to the opening is also investigated.</p><p>In the third part the acoustic impedance of perforated plates are investigated. In particular the application to small perforation ratios ( ≈ 1% ) and holes or slits with apertures of sub-millimetre size, so called micro-perforated plates, are of interest. Linear and non-linear regimes are investigated. A model is derived to calculate the linear acoustic impedance of perforated elements.</p>

The South African economy, which is largely based on heavy industry such as minerals extraction and processing, is by nature very energy intensive. Based on the abundance of coal resources, electricity in South Africa remains amongst the cheapest in the world. Whilst the low electricity price has contributed towards a competitive position, it has also meant that our existing electricity supply is often taken for granted. The economic and environmental benefits of energy efficiency have been well documented. Worldwide, nations are beginning to face up to the challenge of sustainable energy - in other words to alter the way that energy is utilised so that social, environmental and economic aims of sustainable development are supported. South Africa as a developing nation recognises the need for energy efficiency, as it is the most cost effective way of meeting the demands of sustainable development. South Africa, with its unique economic, environmental and social challenges, stands to benefit the most from implementing energy efficiency practices. The Energy Efficiency Strategy for South Africa takes its mandate from the South African White Paper on Energy Policy. It is the first consolidated governmental effort geared towards energy efficiency practices throughout South Africa. The strategy allows for the immediate implementation of low-cost and no-cost interventions, as well as those higher-cost measures with short payback periods. An initial target has been set for an across sector energy efficiency improvement of 12% by 2014. Thermal and energy system simulation is globally recognised as one of the most effective and powerful tools to improve overall energy efficiency. However, because of the usual extreme mathematical nature of most simulation algorithms, coupled with the historically academic environment in which most simulation software is developed, valid perceptions exist that system simulation is too time consuming and cumbersome. It is also commonly known that system simulation is only effective in the hands of highly skilled operators, which are specialists in their prospective fields. Through previous work done in the field, and the design of a dynamic thermal and energy system simulation scheme for cross industry applications, it was shown that system simulation has evolved to such an extent that these perceptions are not valid any more. The South African mining and commercial building industries are two of the major consumers of electricity within South Africa. By improving energy efficiency practices within the building and mining industry, large savings can be realised. An extensive investigation of the literature showed that no general suitable computer simulation software for cross industry mining and building thermal and energy system simulation could be found. Because the heating, ventilation and air conditioning (HVAC) of buildings, closely relate to the ventilation and cooling systems of mines, valuable knowledge from this field was used to identify the requirements and specifications for the design of a new single cross industry dynamic integrated thermal and energy system simulation tool. VISUALQEC was designed and implemented to comply with the needs and requirements identified. A new explicit system component model and explicit system simulation engine, combined with a new improved simulation of mass flow through a system procedure, suggested a marked improvement on overall simulation stability, efficiency and speed. The commercial usability of the new simulation tool was verified for building applications by doing an extensive building energy savings audit. The new simulation tool was further verified by simulating the ventilation and cooling (VC) and underground pumping system of a typical South African gold mine. Initial results proved satisfactory but, more case studies to further verify the accuracy of the implemented cross industry thermal and energy system simulation tool are needed. Because of the stable nature of the new VISUALQEC simulation engine, the power of the simulation process can be further extended to the mathematical optimisation of various system variables. In conclusion, this study highlighted the need for new simulation procedures and system designs for the successful implementation and creation of a single dynamic thermal and energy system simulation tool for cross industry applications. South Africa should take full advantage of the power of thermal and energy system simulation towards creating a more energy efficient society. / Thesis (Ph.D. (Mechanical Engineering))--North-West University, Potchefstroom Campus, 2005.

The South African economy, which is largely based on heavy industry such as minerals extraction and processing, is by nature very energy intensive. Based on the abundance of coal resources, electricity in South Africa remains amongst the cheapest in the world. Whilst the low electricity price has contributed towards a competitive position, it has also meant that our existing electricity supply is often taken for granted. The economic and environmental benefits of energy efficiency have been well documented. Worldwide, nations are beginning to face up to the challenge of sustainable energy - in other words to alter the way that energy is utilised so that social, environmental and economic aims of sustainable development are supported. South Africa as a developing nation recognises the need for energy efficiency, as it is the most cost effective way of meeting the demands of sustainable development. South Africa, with its unique economic, environmental and social challenges, stands to benefit the most from implementing energy efficiency practices. The Energy Efficiency Strategy for South Africa takes its mandate from the South African White Paper on Energy Policy. It is the first consolidated governmental effort geared towards energy efficiency practices throughout South Africa. The strategy allows for the immediate implementation of low-cost and no-cost interventions, as well as those higher-cost measures with short payback periods. An initial target has been set for an across sector energy efficiency improvement of 12% by 2014. Thermal and energy system simulation is globally recognised as one of the most effective and powerful tools to improve overall energy efficiency. However, because of the usual extreme mathematical nature of most simulation algorithms, coupled with the historically academic environment in which most simulation software is developed, valid perceptions exist that system simulation is too time consuming and cumbersome. It is also commonly known that system simulation is only effective in the hands of highly skilled operators, which are specialists in their prospective fields. Through previous work done in the field, and the design of a dynamic thermal and energy system simulation scheme for cross industry applications, it was shown that system simulation has evolved to such an extent that these perceptions are not valid any more. The South African mining and commercial building industries are two of the major consumers of electricity within South Africa. By improving energy efficiency practices within the building and mining industry, large savings can be realised. An extensive investigation of the literature showed that no general suitable computer simulation software for cross industry mining and building thermal and energy system simulation could be found. Because the heating, ventilation and air conditioning (HVAC) of buildings, closely relate to the ventilation and cooling systems of mines, valuable knowledge from this field was used to identify the requirements and specifications for the design of a new single cross industry dynamic integrated thermal and energy system simulation tool. VISUALQEC was designed and implemented to comply with the needs and requirements identified. A new explicit system component model and explicit system simulation engine, combined with a new improved simulation of mass flow through a system procedure, suggested a marked improvement on overall simulation stability, efficiency and speed. The commercial usability of the new simulation tool was verified for building applications by doing an extensive building energy savings audit. The new simulation tool was further verified by simulating the ventilation and cooling (VC) and underground pumping system of a typical South African gold mine. Initial results proved satisfactory but, more case studies to further verify the accuracy of the implemented cross industry thermal and energy system simulation tool are needed. Because of the stable nature of the new VISUALQEC simulation engine, the power of the simulation process can be further extended to the mathematical optimisation of various system variables. In conclusion, this study highlighted the need for new simulation procedures and system designs for the successful implementation and creation of a single dynamic thermal and energy system simulation tool for cross industry applications. South Africa should take full advantage of the power of thermal and energy system simulation towards creating a more energy efficient society. / Thesis (Ph.D. (Mechanical Engineering))--North-West University, Potchefstroom Campus, 2005.

The diploma thesis deals with CFD simulating the air flow inside the car using the numerical calculation program Star-CCM+. The aim of the thesis was to prepare 3D geometry, resp. realistic model of the real car, preparing boundary conditions including material properties, simulating the steady state of the environment and evaluating the speed and temperature of the car cabin. The paper presents the results of the temperature distribution and air velocities in the cabin during the winter, spring and summer conditions in HVAC on and HVAC off modes. The monitored air temperatures and surface temperatures of the car parts are compared with the measured data. The average difference between simulation and measurement was at air temperatures of 2.3 °C and surface temperatures of 3.4 °C.

[pt] Dada a crescente demanda de energia elétrica em todo o mundo, somado ao desafio de buscar um modo mais eficiente de consumir a energia elétrica sem perder de vista a viabilidade econômico-financeira dos projetos, verifica-se na literatura a escassez de modelos que levam em conta estas questões para implementação dos projetos para gestão de energia. Nestes projetos, além da busca pela redução do consumo de energia, deve-se considerar as incertezas atreladas ao investimento para as tomadas de decisão entre investir ou abandoná-los. O objetivo desta dissertação é propor um modelo para avaliação técnico-financeira de um projeto de gestão de energia a partir de uso da geração distribuída com fontes renováveis e ações de eficiência energética. O modelo conceitual desenvolvido para alcançar tal objetivo agrega ferramentas modernas de avaliação econômico-financeira, opções reais, e metodologias de Medição e Verificação da performance de projetos de eficiência energética. Os resultados da aplicabilidade deste modelo foram obtidos através do seu emprego em uma situação real de avaliação de um projeto de gestão de energia na indústria farmacêutica. Concluiu-se com esta aplicação que é possível realizar avaliação técnico-financeira de projetos para gestão de energia por meio da abordagem de opções reais obtendo-se resultados satisfatórios com a aplicação do modelo. / [en] Given the growing demand for electricity worldwide, added to the challenge of finding a more efficient way to consume electricity without losing sight of the economic and financial viability of projects, there is a scarcity of models in the literature that lead to account these issues for the implementation of energy management projects. In these projects, in addition to seeking to reduce energy consumption, uncertainties linked to investment must be considered as a recovery of the decision between investing or abandoning them. The objective of this dissertation is to propose a model for the technical and financial evaluation of an energy management project based on the use of distributed generation with renewable sources and energy efficiency actions. The conceptual model developed to achieve this objective combines modern tools for evaluating financial savings, real options, and methodologies for measuring and verifying the performance of energy efficiency projects. The results of the applicability of this model were obtained through its use in a real situation of evaluation of an energy management project in the pharmaceutical industry. It was concluded with this application that it is possible to carry out technical-financial evaluation of energy management projects through the real options approach.

This thesis contains three papers investigating problems of interest for noise control in ducts. The first part of this thesis treats the sound propagation in rectangular ducts with flexible walls. Various experimental techniques are performed to measure the internal sound propagation and radiation to the surrounding. An analytical model is derived to calculate the coupled propagation wavenumber and radiated sound power. The two-port formalism is used. The second part starts with the sound propagation in open ended circular straight pipe with airflow (a tailpipe). Various aspects such as: acoustic damping, reflection and transmission at the open termination are investigated. Sound absorption due to vorticity shed at the opening is also treated. The geometry of the opening is then modified (oblique cuts, diffusers) and comparisons with the reference straight pipe is made for the sound transmission and flow induced noise generation. The effect of an upstream bend close to the opening is also investigated. In the third part the acoustic impedance of perforated plates are investigated. In particular the application to small perforation ratios ( ≈ 1% ) and holes or slits with apertures of sub-millimetre size, so called micro-perforated plates, are of interest. Linear and non-linear regimes are investigated. A model is derived to calculate the linear acoustic impedance of perforated elements. / QC 20101111

The electric power systems are currently being transformed through the integration of intermittent renewable energy resources and new types of electric loads. These developments run the risk of increasing mismatches between electricity supply and demand, and may cause non-favorable utilization rates of some power system components. Using Demand Response (DR) from flexible loads in the building stock is a promising solution to overcome these challenges for electricity market actors. However, as DR is not used at a large scale today, there are validity concerns regarding its cost-benefit and reliability when compared to traditional investment options in the power sector, e.g. network refurbishment. To analyze the potential in DR solutions, bottom-up simulation models which capture consumption processes in buildings is an alternative. These models must be simple enough to allow aggregations of buildings to be instantiated and at the same time intricate enough to include variations in individual behaviors of end-users. This is done so the electricity market actor can analyze how large volumes of flexibility acts in various market and power system operation contexts, but also can appreciate how individual end-users are affected by DR actions in terms of cost and comfort. The contribution of this thesis is bottom-up simulation models for generating load profiles in detached houses and office buildings. The models connect end-user behavior with the usage of appliances and hot water loads through non-homogenous Markov chains, along with physical modeling of the indoor environment and consumption of heating and cooling loads through lumped capacitance models. The modeling is based on a simplified approach where openly available data and statistics are used, i.e. data that is subject to privacy limitations, such as smart meter measurements are excluded. The models have been validated using real load data from detached houses and office buildings, related models in literature, along with energy-use statistics from national databases. The validation shows that the modeling approach is sound and can provide reasonably accurate load profiles as the error results are in alignment with related models from other research groups. This thesis is a composite thesis of five papers. Paper 1 presents a bottom-up simulation model to generate load profiles from space heating, hot water and appliances in detached houses. Paper 2 presents a data analytic framework for analyzing electricity-use from heating ventilation and air conditioning (HVAC) loads and appliance loads in an office building. Paper 3 presents a non-homogeneous Markov chain model to simulate representative occupancy profiles in single office rooms. Paper 4 utilizes the results in paper 2 and 3 to describe a bottom-up simulation model that generates load profiles in office buildings including HVAC loads and appliances. Paper 5 uses the model in paper 1 to analyze the technical feasibility of using DR to solve congestion problems in a distribution grid. / Integrering av förnybara energikällor och nya typer av laster i de elektriska energisystemen är möjliga svar till klimatförändringar och uttömning av ändliga naturresurser. Denna integration kan dock öka obalanserna mellan utbud och efterfrågan av elektricitet, och orsaka en ogynnsam utnyttjandegrad av vissa kraftsystemkomponenter. Att använda efterfrågeflexibilitet (Demand Response) i byggnadsbeståndet är en möjlig lösning till dessa problem för olika elmarknadsaktörer. Men eftersom efterfrågeflexibilitet inte används i stor skala idag finns det obesvarade frågor gällande lösningens kostnadsnytta och tillförlitlighet jämfört med traditionella investeringsalternativ i kraftsektorn. För att analysera efterfrågeflexibilitetslösningar är botten-upp-simuleringsmodeller som fångar elförbrukningsprocesser i byggnaderna ett alternativ. Dessa modeller måste vara enkla nog för att kunna representera aggregeringar av många byggnader men samtidigt tillräckligt komplicerade för att kunna inkludera unika slutanvändarbeteenden. Detta är nödvändigt när elmarknadsaktören vill analysera hur stora volymer efterfrågeflexibilitet påverkar elmarknaden och kraftsystemen, men samtidigt förstå hur styrningen inverkar på den enskilda slutanvändaren.  Bidraget från denna avhandling är botten-upp-simuleringsmodeller för generering av elförbrukningsprofiler i småhus och kontorsbyggnader. Modellerna kopplar slutanvändarbeteende med elförbrukning från apparater och varmvattenanvändning tillsammans med fysikaliska modeller av värmedynamiken i byggnaderna. Modellerna är byggda på en förenklad approach som använder öppen data och statistisk, där data som har integritetsproblem har exkluderats. Simuleringsresultat har validerats mot elförbrukningsdata från småhus och kontorsbyggnader,  relaterade modeller från andra forskargrupper samt energistatistik från nationella databaser. Valideringen visar att modellerna kan generera elförbrukningsprofiler med rimlig noggrannhet. Denna avhandling är en sammanläggningsavhandling bestående av fem artiklar. Artikel 1 presenterar botten-upp-simuleringsmodellen för genereringen av elförbrukningsprofiler från uppvärmning, varmvatten och apparater i småhus. Artikel 2 presenterar ett dataanalytiskt ramverk för analys av elanvändningen från uppvärmning, ventilation, och luftkonditioneringslaster (HVAC) och apparatlaster i en kontorsbyggnad. Artikel 3 presenterar en icke-homogen Markovkedjemodell för simulering av representativa närvaroprofiler i enskilda kontorsrum. Artikel  4 använder resultaten i artiklarna  2 och 3 för att beskriva en botten-upp-simuleringsmodell för generering av elförbrukningsprofiler från HVAC-laster och apparater i kontorsbyggnader. Artikel  5 använder modellen i artikel 1 för att analysera den tekniska möjligheten att använda efterfrågeflexibilitet för att lösa överbelastningsproblem i ett eldistributionsnät. / <p>QC 20160329</p>

The diploma thesis deals with the problems of the indoor environment of swimming pool halls. Firstly, it describes issues and principles of designing HVAC system in the areas with high humidity production. Thesis then focuses on various approaches to calculations of evaporation from the water surface and different possibilities of dehumidification including different types of HVAC units. This knowledge was applied to the design of HVAC system for particular assigned building, for which are proposed two different solutions. Thesis includes experimental part, its aim is to analyse one specific critical part of the hall. Based on local surveying and long-term measurements a few possibilities of improvement are suggested.