Artificial membranes composed of natural lipids are not stable when exposed to air/vacuum, surfactant, organic solvent, etc. Polymerizable lipids provide an opportunity to broaden the use of lipid membranes to study ligand-receptor pairs under harsh experimental conditions. This dissertation presents the utilization of polymerizable lipids in matrix assisted laser desorption and ionization-mass spectrometry (MALDI-TOF MS) for analysis of ligands bound to membrane receptors. This platform may be applied to rapid drug-screening for membrane receptors including transmembrane proteins. Bacterial toxins and their membrane receptors were used as model ligand-receptor pairs to demonstrate the feasibility of using polymerizable lipids to detect and identify ligands by MALDI-TOF MS. Cholera toxin B (CTB) was successfully detected bound to polymerized lipid membranes with incorporation of its membrane receptor, GM1, while no CTB was detected in non-polymerizable lipid membranes. This affinity capture platform based on poly(lipid) showed a high resistance to interferences. On-plate digestion of bound CTB was performed and 57% amino acid sequence coverage was achieved. Total internal reflection fluorescence microscopy (TIRF-M) was applied to compare CTB-GM1 binding affinity in polymerized and unpolymerized membranes. Under a static flow system, the binding between CTB and GM1 was found to be stronger in polymerized membranes than other membranes. However, the ligand concentration under a static flow system is not in excess and the apparent binding affinity is likely to be significantly different than the true value. The true binding affinity can be approached under a continuous flow system, however equilibration time was found to be too long to address experimentally. Membrane fluidity, which may be required to maintain the membrane receptor activity, is suppressed in poly(lipid) membranes compared to unpolymerized membranes. In order to maintain fluidity, a non-polymerizable lipid was mixed into a polymerized lipid. Fluorescence recovery after photobleaching (FRAP) data showed that fluidity of membrane composed of the mixed lipid was maintained compared to pure poly(lipid). Phase segregation of polymerized lipid and non-polymerizable lipid was detected by atomic force microscopy (AFM). CTB bound to GM1 in mixed lipid membranes was detected by MALDI-MS, indicating the mixed lipid membranes retain stability under MALDI-MS analysis conditions.

Artificial membranes composed of natural lipids are not stable when exposed to air/vacuum, surfactant, organic solvent, etc. Polymerizable lipids provide an opportunity to broaden the use of lipid membranes to study ligand-receptor pairs under harsh experimental conditions. This dissertation presents the utilization of polymerizable lipids in matrix assisted laser desorption and ionization-mass spectrometry (MALDI-TOF MS) for analysis of ligands bound to membrane receptors. This platform may be applied to rapid drug-screening for membrane receptors including transmembrane proteins. Bacterial toxins and their membrane receptors were used as model ligand-receptor pairs to demonstrate the feasibility of using polymerizable lipids to detect and identify ligands by MALDI-TOF MS. Cholera toxin B (CTB) was successfully detected bound to polymerized lipid membranes with incorporation of its membrane receptor, GM1, while no CTB was detected in non-polymerizable lipid membranes. This affinity capture platform based on poly(lipid) showed a high resistance to interferences. On-plate digestion of bound CTB was performed and 57% amino acid sequence coverage was achieved. Total internal reflection fluorescence microscopy (TIRF-M) was applied to compare CTB-GM1 binding affinity in polymerized and unpolymerized membranes. Under a static flow system, the binding between CTB and GM1 was found to be stronger in polymerized membranes than other membranes. However, the ligand concentration under a static flow system is not in excess and the apparent binding affinity is likely to be significantly different than the true value. The true binding affinity can be approached under a continuous flow system, however equilibration time was found to be too long to address experimentally. Membrane fluidity, which may be required to maintain the membrane receptor activity, is suppressed in poly(lipid) membranes compared to unpolymerized membranes. In order to maintain fluidity, a non-polymerizable lipid was mixed into a polymerized lipid. Fluorescence recovery after photobleaching (FRAP) data showed that fluidity of membrane composed of the mixed lipid was maintained compared to pure poly(lipid). Phase segregation of polymerized lipid and non-polymerizable lipid was detected by atomic force microscopy (AFM). CTB bound to GM1 in mixed lipid membranes was detected by MALDI-MS, indicating the mixed lipid membranes retain stability under MALDI-MS analysis conditions.

Peptide mass fingerprinting (PMF) of protein digests is a widely-accepted method for protein identification in MS-based proteomic studies. Matrix-assisted laser desorption/ionization mass spectrometry (MALDI) is the technique of choice in PMF experiments. The success of protein identification in a PMF experiment is directly related to the amount of amino acid sequence coverage. In an effort to increase the amount of sequence information obtained in a MALDI PMF experiment, performic acid oxidation is performed on tryptic digests of known proteins. Performic acid was chosen as the chemical oxidant due to the ease of use and to the selective oxidation of cysteine, methionine, and tryptophan residues. In experiments performed in our laboratory, performic acid oxidation either increased or did not affect protein sequence coverage in PMF experiments when oxidized tryptic digests were analyzed by MALDI. Negative mode MALDI data were acquired, as well as positive mode MALDI data, due to the enhanced ionization of cysteic acid-containing peptides in negative mode. Furthermore, the confidence in a protein match is increased by observation of mass shifts indicative of cysteine, methionine, and/or tryptophan in oxidized peptide ion signals when comparing MALDI spectra prior to performic acid oxidation and after oxidation due to the low abundance of these residues in the majority of all known and hypothetical proteins.

Stuttgart, Univ., Diss., 2008.

AN ABSTRACT OF THE DISSERTATION OF Mohamed Zaneer Segu Mohideen, for the Doctor of Philosophy degree in Chemistry, presented on November 3 2008, at Southern Illinois University Carbondale. TITLE: TARGET MODIFICATION FOR ENHANCED PERFORMANCE MATRIX ASSISTED LASER DESORPTION IONIZATION (MALDI) MASS SPECTROMETRY MAJOR PROFESSOR: Dr. Gary R Kinsel MALDI MS, a powerful tool for the analysis of biomolecules, has undergone major advancement in instrumentation to yield improvements in robustness, sensitivity and throughput since its invention. Despite these developments in instrumentation, the performance of MALDI is in question when it comes to the analysis of complex protein/peptide mixtures. For these types of mixtures the performance of MALDI can be improved by either simplifying the sample complexity, modifying the sample preparation approach to increase the ionization efficiency of mixture components or seeking further enhancements to instrument performance. In this work these improvements are pursued through modifications to the MALDI target itself. In the MALDI analysis of high MW proteins a primary limitation is thought to be related to inefficient desorption of these compounds as proteins are expected to experience relatively stronger interaction with the MALDI target surface. This insight led to investigations of the use of various sublayers, deposited directly on the MALDI target, as a means to improve high molecular weight protein MALDI ion signals. In the first approach the protein / matrix mixture is applied on a laser desorbable polyaromatic hydrocarbon layer which serves as a barrier to protein surface binding interactions. These sublayers are also shown to be useful for on probe sample purification from salts that are known to interfere with MALDI performance. In the second approach the sublayer is formed from bovine serum albumin, a protein that is known to have strong binding affinity for surfaces and is also expected to form a barrier to protein surface binding interactions. Enhancements in MALDI performance and reductions in the limit of detection for proteins on these albumin precoated probes clearly demonstrate the influence of surface-protein interaction in the analysis of these species by MALDI MS. In further studies, methods to improve on-MALDI-target approaches to the simplification of sample complexity are investigated. These on-target separation approaches have been previously developed and shown to be successful for reducing sample complexity in the Kinsel Research Group. However, one significant limitation to this separation approach is the limited surface binding capacity of the MALDI probe. This limitation led to theoretical and experimental studies of methods to improve the surface protein binding capacity. Studies performed show that the surface binding capacity can be improved significantly through attachment of gold beads and through physical / chemical roughening of the target surface. Both approaches are shown to yield higher performance MALDI probes with lowered limits of detection for deposited / affinity captured proteins.

No description available.

No description available.

No description available.

[pt] Método de identificação e quantificação de peptídeos, através da otimização de estratégias para a marcação de peptídeos com metais e subsequente separação por nano-HPLC-UV, MALDI MS. Primeiramente, peptídeos foram marcados com 3 diferentes metais lantanídeos usando um reagente funcional NHS-DOTA. Os resultados demonstraram que a reação de derivatização usando o reagente quelante DOTA foi eficiente para peptídeos simples e misturas dos mesmos, verificada através do MALDI MS a partir da relação m/z. Em paralelo, análises ambientais foram realizadas pela otimização de um procedimento de extração de metalotioneína em bílis de peixe, uma vez que esta matriz tem sido reportada como um biomarcador ambiental de contaminação por metal. Diferentes procedimentos e agentes de redução foram aplicadas para a extração de metalotioneína em bílis e fígado de peixe (Oreochromis niloticus. Análises espectrofotométricas foram realizadas a fim de quantificar os extratos de MT, e gel SDS-PAGE foi usado para avaliação qualitativa dos diferentes procedimentos usados. Cada procedimento foi avaliado estatisticamente. Metodologia de superfície de resposta foi aplicada para amostras de bílis, a fim de avaliar a resposta desta matriz. Em um contexto ambiental, concentrações de MT biliar foi mais baixa que MT do fígado, no entanto, a primeira mostrou-se mais adequada para um monitoramento ambiental. / [en] This work developed a new method for the identification and quantification of peptides, by optimizing some of the available strategies suitable for labeling peptides with lanthanide metals with subsequent separation by nano-HPLC with UV detection, matrix-assisted laser desorption ionization-mass spectrometry (MALDI MS). First, peptides were labeled with the three different lanthanide metals using a functional DOTA-based reagent. The results demonstrate that the derivatization reaction using the chelating reagent DOTA-NHS-ester was effective for single peptides and peptide mixtures, verified from the m/z relation obtained by MALDI MS. In parallel, environmental analyses were conducted, by performing the standardization of metalloprotein purification in fish bile, since this matrix has been reported as a biomarker for environmental metal contamination. Different procedures and reducing agents were applied to purify MT isolated from fish (Oreochromis niloticus) bile and liver. Spectrophotometrical analyses were used to quantify the resulting MT samples, and SDS-PAGE gels were used to qualitatively assess the different procedure results. A response surface methodology was applied for bile samples. In an environmental context, biliary MT was lower than liver MT, and, bile MT seems to be more adequate in environmental monitoring scopes. / [fr] Ce travail a développé une nouvelle méthode pour l identification et la quantification des peptides, par l optimisation de certaines stratégies disponibles appropriées pour le marquage des peptides avec des métaux lanthanide, une séparation par nano-HPLC et détection UV, et suivi par MALDI MS. Tout d abord, les peptides ont été marqués avec les trois métaux lanthanides différents et un réactif fonctionnel - DOTA. Les résultats montrent que la réaction de transformation en dérivé à l aide du réactif chélateur DOTA-NHS-ester a été efficace pour des peptides individuels et des mélanges de peptides, vérifiées à partir de la relation m/z obtenue par MALDI MS. En parallèle, nous avons effectué l optimisation pour la purification de métalloprotéine dans la bile de poisson, qui est signalée entant que biomarqueurs de contamination métallique de l environnement. Des procédures différentes et les agents réduisant ont été apliqués pour purifier les MT isolées de la bile et du foie des poissons (Oreochromis niloticus). Des analyses spectrophotométriques ont été utilisées pour quantifier les échantillons de MT, et le gel SDS-PAGE a été utilisé pour évaluer qualitativement les différents résultats de la procédure. Chaque procédure a en suíte été évaluée statistiquement, une méhtode des surfaces de réponse a été appliquée. Les MT de la bile semblent être plus adéquate pour la surveillance de l environnement en ce qui concerne l exposition récente à des xénobiotiques qui peuvent influer sur l expression protéomique et metalloproteomique de cette matrice biologique.

Lignocellulosic biomass (e.g., non food-based agricultural resides and forestry wastes) has recently been promoted for use as a source of bioethanol instead of food-based materials (e.g., corn and sugar cane), however to fully realize these benefits an improved understanding of lignocellulosic recalcitrance must be developed. The primary goal of this thesis is to gain fundamental knowledge about the surface of the plant cell wall, which is to be integrated into understanding biomass recalcitrance. Imaging mass spectrometry by TOF-SIMS and MALDI-IMS is applied to understand detailed spatial and lateral changes of major components in the surface of biomass under submicron scale. Using TOF-SIMS analysis, we have demonstrated a dilute acid pretreated poplar stem represented chemical differences between surface and bulk compositions. Especially, abundance of xylan was observed on the surface while sugar profile data showed most xylan (ca. 90%) removed from the bulk composition. Water only flowthrough pretreated poplar also represented difference chemistry between surface and bulk, which more cellulose revealed on the surface compared to bulk composition. In order to gain the spatial chemical distribution of biomass, 3-dimensional (3D) analysis of biomass using TOF-SIMS has been firstly introduced in the specific application of understanding recalcitrance. MALDI-IMS was also applied to visualize different molecular weight (e.g., DP) of cellulose oligomers on the surface of biomass.