A robust nonlinear observer, utilizing the sliding mode concept, is developed for the dynamic positioning of ships. The observer provides the estimates of linear velocities of the ship and bias from the slowly varying environmental loads. It also filters out wave frequency motion to avoid wear of actuators and excessive fuel consumption. Especially, the observer structure with a saturation function makes the proposed observer robust against neglected nonlinearties, disturbances and uncertainties. A direct adaptive neural network controller is developed for a model of an underwater vehicle. Radial basis neural network and multilayer neural network are used in the closed-loop to approximate the nonlinear vehicle dynamics. No prior off-line training phase and no explicit knowledge of the structure of the plant are required, and this scheme exploits the advantages of both neural network control and adaptive control. A control law and a stable on-line adaptive law are derived using the Lyapunov theory, and the convergence of the tracking error to zero and the boundedness of signals are guaranteed. Comparison of the results with different neural network architectures is made, and performance of the controller is demonstrated by computer simulations. The sliding mode observer is used to eliminate observation spillovers in the vibration control of flexible structures. It is common to build a state feedback controller and a state estimator based on the mathematical model of the system with a finite number of vibration modes, but this may cause control and observation spillover due to the residual (uncontrolled) modes. The performance of a sliding mode observer is compared with that of a conventional Kalman filter in order to demonstrate robustness and disturbance decoupling characteristics. Simulation and experimental results using the sliding mode observer are presented for the active vibration control of a cantilever beam using smart materials. / Ph. D.

The presented research concerns the control of unmanned vehicles. The results introduced in this dissertation provide a solid control framework for a wide class of nonlinear uncertain systems, with a special emphasis on issues related to implementation, such as control input amplitude and rate saturation, or partial state measurements availability. More specifically, an adaptive control framework, allowing to enforce amplitude and rate saturation of the command, is developed. The motion control component of this framework, which works in conjunction with a saturation algorithm, is then specialized to different types of vehicles. Vertical take-off and landing aerial vehicles and a general class of autonomous marine vehicles are considered. A nonlinear control algorithm addressing the tracking problem for a class of underactuated, non-minimum phase marine vehicles is then introduced. This motion controller is extended, using direct and indirect adaptive techniques, to handle parametric uncertainties in the system model. Numerical simulations are used to illustrate the efficacy of the algorithms. Next, the output feedback control problem is treated, for a large class of nonlinear and uncertain systems. The proposed solution relies on a novel nonlinear observer which uses output measurements and partial knowledge of the system's dynamics to reconstruct the entire state for a wide class of nonlinear systems. The observer is then extended to operate in conjunction with a full state feedback control law and solve both the output feedback control problem and the state observation problem simultaneously. The resulting output feedback control algorithm is then adjusted to provide a high level of robustness to both parametric and structural model uncertainties. Finally, in a natural extension of these results from motion control of a single system to collaborative control of a group of vehicles, a cooperative control framework addressing limited communication issues is introduced. / Ph. D.

This thesis synthesizes general and scalable distributed nonlinear control algorithms with application to legged robots. It explores both naturally decentralized problems in legged locomotion, such as the collaborative control of human-lower extremity prosthesis and the decomposition of high-dimensional controllers of a naturally centralized problem into a net- work of low-dimensional controllers while preserving equivalent performance. In doing so, strong nonlinear interaction forces arise, which this thesis considers and sufficiently addresses. It generalizes to both symmetric and asymmetric combinations of subsystems. Specifically, this thesis results in two distinct distributed control algorithms based on the decomposition approach. Towards synthesizing the first algorithm, this thesis presents a formal foundation based on de- composition, Hybrid Zero Dynamics (HZD), and scalable optimization to develop distributed controllers for hybrid models of collaborative human-robot locomotion. This approach con- siders a centralized controller and then decomposes the dynamics and parameterizes the feedback laws to synthesize local controllers. The Jacobian matrix of the Poincaré map with local controllers is studied and compared with the centralized ones. An optimization problem is then set up to tune the parameters of the local controllers for asymptotic stability. It is shown that the proposed approach can significantly reduce the number of controller parameters to be optimized for the synthesis of distributed controllers, deeming the method computationally tractable. To evaluate the analytical results, we consider a human amputee with the point of separation just above the knee and assume the average physical parameters of a human male. For the lower-extremity prosthesis, we consider the PRleg, a powered knee-ankle prosthetic leg, and together, they form a 19 Degrees of Freedom (DoF) model. A multi-domain hybrid locomotion model is then employed to rigorously assess the performance of the afore-stated control algorithm via numerical simulations. Various simulations involving the application of unknown external forces and altering the physical parameters of the human model unbeknownst to the local controllers still result in stable amputee loco- motion, demonstrating the inherent robustness of the proposed control algorithm. In the later part of this thesis, we are interested in developing distributed algorithms for the real-time control of legged robots. Inspired by the increasing popularity of Quadratic programming (QP)-based nonlinear controllers in the legged locomotion community due to their ability to encode control objectives subject to physical constraints, this thesis exploits the idea of distributed QPs. In particular, this thesis presents a formal foundation to systematically decompose QP-based centralized nonlinear controllers into a network of lower-dimensional local QPs. The proposed approach formulates a feedback structure be- tween the local QPs and leverages a one-step communication delay protocol. The properties of local QPs are analyzed, wherein it is established that their steady-state solutions on periodic orbits (representing gaits) coincide with that of the centralized QP. The asymptotic convergence of local QPs' solutions to the steady-state solution is studied via Floquet theory. Subsequently, to evaluate the effectiveness of the analytical results, we consider an 18 DoF quadrupedal robot, A1, as a representative example. The network of distributed QPs mentioned earlier is condensed to two local QPs by considering a front-hind decomposition scheme. The robustness of the distributed QP-based controller is then established through rigorous numerical simulations that involve exerting unmodelled external forces and intro- ducing unknown ground height variations. It is further shown that the proposed distributed QPs have reduced sensitivity to noise propagation when compared with the centralized QP. Finally, to demonstrate that the resultant distributed QP-based nonlinear control algorithm translates equivalently well to hardware, an extensive set of blind locomotion experiments on the A1 robot are undertaken. Similar to numerical simulations, unknown external forces in the form of aggressive pulls and pushes were applied, and terrain uncertainties were introduced with the help of arbitrarily displaced wooden blocks and compliant surfaces. Additionally, outdoor experiments involving a wide range of terrains such as gravel, mulch, and grass at various speeds up to 1.0 (m/s) reiterate the robust locomotion observed in numerical simulations. These experiments also show that the computation time is significantly dropped when the distributed QPs are considered over the centralized QP. / Doctor of Philosophy / Inspiration from animals and human beings has long driven the research of legged loco- motion and the subsequent design of the robotic counterparts: bipedal and quadrupedal robots. Legged robots have also been extended to assist human amputees with the help of powered prostheses and aiding people with paraplegia through the development of exoskeleton suits. However, in an effort to capture the same robustness and agility demonstrated by nature, our design abstractions have become increasingly complicated. As a result, the en- suing control algorithms that drive and stabilize the robot are equivalently complicated and subjected to the curse of dimensionality. This complication is undesirable as failing to compute and prescribe a control action quickly destabilizes and renders the robot uncontrollable. This thesis addresses this issue by seeking nature for inspiration through a different perspective. Specifically, through some earlier biological studies on cats, it was observed that some form of locality is implemented in the control of animals. This thesis extends this observation to the control of legged robots by advocating an unconventional solution. It proposes that a high-dimensional, single-legged agent be viewed as a virtual composition of multiple, low-dimensional subsystems. While this outlook is not new and forms precedent to the vast literature of distributed control, the focus has always been on large-scale systems such as power networks or urban traffic networks that preserve sparsity, mathematically speaking. On the contrary, legged robots are underactuated systems with strong interaction forces acting amongst each subsystem and dense mathematical structures. This thesis considers this problem in great detail and proposes developments that provide theoretical stability guarantees for the distributed control of interconnected legged robots. As a result, two distinctly different distributed control algorithms are formulated. We consider a naturally decentralized structure appearing in the form of a human-lower extremity prosthesis to synthesize distributed controllers using the first control algorithm. Subsequently, the resultant local controllers are rigorously validated through extensive full- order simulations. In order to validate the second algorithm, this thesis considers the problem of quadrupedal locomotion as a representative example. It assumes for the purposes of control synthesis that the quadruped is comprised of two subsystems separated at the geometric center, resulting in a front and hind subsystem. In addition to rigorous validation via numerical simulations, in the latter part of this thesis, to demonstrate that distributed controllers preserve practicality, rigorous and extensive experiments are undertaken in indoor and outdoor settings on a readily available quadrupedal robot A1.

This dissertation aims to realize the goal of deploying legged robots that cooperatively walk to transport objects in complex environments. More than half of the Earth's continent is unreachable to wheeled vehicles---this motivates the deployment of collaborative legged robots to enable the accessibility of these environments and thus bring robots into the real world. Although significant theoretical and technological advances have allowed the development of distributed controllers for complex robot systems, existing approaches are tailored to the modeling and control of multi-agent systems composed of collaborative robotic arms, multi-fingered robot hands, aerial vehicles, and ground vehicles, but not collaborative legged agents. Legged robots are inherently unstable, unlike most of the systems where these algorithms have been deployed. Models of cooperative legged robots are further described by high-dimensional, underactuated, and complex hybrid dynamical systems, which complicate the design of control algorithms for coordination and motion control. There is a fundamental gap in knowledge of control algorithms for safe motion control of these inherently unstable hybrid dynamical systems, especially in the context of collaborative work. The overarching goal of this dissertation is to create a formal foundation based on scalable optimization and robust and nonlinear control to develop distributed and hierarchical feedback control algorithms for cooperative legged robots to transport objects in complex environments. We first develop a hierarchical nonlinear control algorithm, based on model predictive control (MPC), quadratic programming (QP), and virtual constraints, to generate and stabilize locomotion patterns in a real-time manner for dynamical models of single-agent quadrupedal robots. The higher level of the proposed control scheme is developed based on an event-based MPC that computes the optimal center of mass (COM) trajectories for a reduced-order linear inverted pendulum (LIP) model subject to the feasibility of the net ground reaction force (GRF). QP-based virtual constraint controllers are developed at the lower level of the proposed control scheme to impose the full-order dynamics to track the optimal trajectories while having all individual GRFs in the friction cone. The analytical results are numerically verified to demonstrate stable and robust locomotion of a 22 degree of freedom (DOF) quadrupedal robot, in the presence of payloads, external disturbances, and ground height variations. We then present a hierarchical nonlinear control algorithm for the real-time planning and control of cooperative locomotion of legged robots that collaboratively carry objects. An innovative network of reduced-order models subject to holonomic constraints, referred to as interconnected LIP dynamics, is presented to study quasi-statically stable cooperative locomotion. The higher level of the proposed algorithm employs a supervisory controller, based on event-based MPC, to effectively compute the optimal reduced-order trajectories for the interconnected LIP dynamics. The lower level of the proposed algorithm employs distributed nonlinear controllers to reduce the gap between reduced- and full-order complex models of cooperative locomotion. We numerically investigate the effectiveness of the proposed control algorithm via full-order simulations of a team of collaborative quadrupedal robots, each with a total of 22 DOFs. The dissertation also investigates the robustness of the proposed control algorithm against uncertainties in the payload mass and changes in the ground height profile. Finally, we present a layered control approach for real-time trajectory planning and control of dynamically stable cooperative locomotion by two holonomically constrained quadrupedal robots. An innovative and interconnected network of reduced-order models, based on the single rigid body (SRB) dynamics, is developed for trajectory planning purposes. At the higher level of the control scheme, two different MPC algorithms are proposed to address the optimal control problem of the interconnected SRB dynamics: centralized and distributed MPCs. The MPCs compute the reduced-order states, GRFs, and interaction wrenches between the agents. The distributed MPC assumes two local QPs that share their optimal solutions according to a one-step communication delay and an agreement protocol. At the lower level of the control scheme, distributed nonlinear controllers are employed to impose the full-order dynamics to track the prescribed and optimal reduced-order trajectories and GRFs. The effectiveness of the proposed layered control approach is verified with extensive numerical simulations and experiments for the blind, robust, and cooperative locomotion of two holonomically constrained A1 robots with different payloads on different terrains and in the presence of external disturbances. It is shown that the distributed MPC has a performance similar to that of the centralized MPC, while the computation time is reduced significantly. / Doctor of Philosophy / Future cities will include a complex and interconnected network of collaborative robots that cooperatively work with each other and people to support human societies. Human-centered communities, including factories, offices, and homes, are developed for humans who are bipedal walkers capable of stepping over gaps, walking up/down stairs, and climbing ladders. One of the most challenging problems in deploying the next generation of collaborative robots is maneuvering in those complex environments. Although significant theoretical and technological advances have allowed the development of distributed controllers for motion control of multi-agent robotic systems, existing approaches do not address the collaborative locomotion problem of legged robots. Legged robots are inherently unstable with nonlinear and hybrid natures, unlike most systems where these algorithms have been deployed. Furthermore, the evolution of legged collaborative robot teams that cooperatively manipulate objects can be represented by high-dimensional and complex dynamical systems, complicating the design of control algorithms for coordination and motion control. This dissertation aims to establish a formal foundation based on nonlinear control and optimization theory to develop hierarchical feedback control algorithms for effective motion control of legged robots. The proposed layered control algorithms are developed based on interconnected reduced-order models. At the high level, we formulate cooperative locomotion as an optimal control problem of the reduced-order models to generate optimal trajectories. To realize the generated optimal trajectories, nonlinear controllers at the low level of the hierarchy impose the full-order models to track the trajectories while sustaining stability. The effectiveness of the proposed layered control approach is verified with extensive numerical simulations and experiments for the blind and stable cooperative locomotion of legged robots with different payloads on different terrains and subject to external disturbances. The proposed architecture's robustness is shown under various indoor and outdoor conditions, including landscapes with randomly placed wood blocks, slippery surfaces, gravel, grass, and mulch.

In this thesis, the plant identification, state estimation based on the identified plant and also the design of a neuro-controller using multi-layer perceptrons (MLPs) for a complex system are presented. The quasi-linear system to be controlled is both unstable and nonlinear. The complete nonlinear feedback control system is designed without a priori information of the plant dynamics, using only measured input/output data. The first design step is to combine a conventional method of multivariable system identification with a dynamic multi-layer perceptron (MLP) to achieve a constructive method of system identification. Based on the identified linear model of the system, states will be estimated and converted to more appropriate state for control in the second design step. The class of quasilinear nonlinear systems is assumed to operate nominally around an equilibrium point in the neighborhood of which a linearized model exists to represent the system, although normal operation is not limited to the linear region. The results presented here provide an accurate discrete-time nonlinear model, which is used in the design of a nonlinear state estimator. The controller design is derived from a switched-linear feedback controller from the estimated states using the identified linearized model of the system around each suitable operating point, as a role model for the neuro-controller in the initial phase. Finally, using the partially trained controller, the neuro-controller can be further trained "on-line" using a selected performance index to guide the learning. A prototype problem, an inverted pendulum system, is simulated as a physical system to be identified and to be controlled. Simulation results indicate that the present design method is very reliable comparing with other methods and hence is suitable for both identifying and controlling critical industrial processes. The prominent feature of this method is that no specific model information is initially required throughout the identification and control of the nonlinear plant. As an application of identifying an unknown plant in power electronics systems, an empirical data modeling approach which aims at generating small-signal equivalent models and also nonlinear models for a general class of converters, including resonant converters, and subsystems in a distributed power system is presented. / Ph. D.

Esta tesis discute diferentes metodologías de modelado para extraer mejores prestaciones o resultados de estabilidad que aquéllas que el modelado convencional basado en sector no-lineal de sistemas Takagi-Sugeno (también denominados cuasi-LPV) es capaz de producir. En efecto, incluso si las LMIs pueden probar distintas cotas de prestaciones o márgenes de estabilidad (tasa de decaimiento, $\mathcal H_\infty$, etc.) para sistemas politópicos, es bien conocido que las prestaciones probadas dependen del modelo elegido y, dado un sistema no-lineal, dicho modelo politópico no es único. Por tanto, se presentan exploraciones hacia cómo obtener el modelo que es menos perjudicial para la medida de prestaciones elegida. Como una última contribución, mejores resultados son obtenidos mediante la extensión del modelado politópico Takagi-Sugeno a un marco de inclusiones en diferencias cuasi-convexas con planificación de ganancia. En efecto, una versión sin planificación de ganancia fue propuesta por un equipo de investigadores de la Universidad de Sevilla (Fiaccini, Álamo, Camacho) para generalizar el modelado politópico, y esta tesis propone una version aún más general de algunos de dichos resultados que incorpora planificación de ganancia. / This thesis discusses different modelling methodologies to eke out best performance/stability results than conventional sector-nonlinearity Takagi-Sugeno (also known as quasi-LPV) systems modelling techniques are able to yield. Indeed, even if LMIs can prove various performance and stability bounds (decay rate, $\mathcal H_\infty$, etc.) for polytopic systems, it is well known that the proven performance depends on the chosen model and, given a nonlinear dynamic systems, the polytopic embeddings available for it are not unique. Thus, explorations on how to obtain the model which is less deletereous for performance are presented. As a last contribution, extending the polytopic Takagi-Sugeno setup to a gain-scheduled quasi-convex difference inclusion framework allows to improve the results over the polytopic models. Indeed, the non-scheduled convex difference inclusion framework was proposed by a research team in University of Seville (Fiacchini, Alamo, Camacho) as a generalised modelling methodology which included the polytopic one; this thesis poses a further generalised gain-scheduled version of some of these results. / Aquesta tesi discuteix diferents metodologies de modelatge per extreure millors prestacions o resultats d'estabilitat que aquelles que el modelatge convencional basat en sector no-lineal de sistemes Takagi-Sugeno (també anomenats quasi-LPV) és capaç de produir. En efecte, fins i tot si les LMIs poden provar diferents cotes de prestacions o marges d'estabilitat (taxa de decaïment, $\mathcal H_\infty$, etc.) per a sistemes politòpics, és ben conegut que les prestacions provades depenen del model triat i, donat un sistema no-lineal, el dit model politòpic no és únic. Per tant, es presenten exploracions cap a com obtenir el model que és menys perjudicial per a la mesura de prestacions triada. Com una darrera contribució, millors resultats són obtinguts mitjançant l'extensió del modelatge politòpic Takagi-Sugeno a un marc d'inclusions en diferències quasi-convexes amb planificació de guany. En efecte, una versió sense planificació de guany va ser proposada per un equip d'investigadors de la Universitat de Sevilla (Fiaccini, Álamo, Camacho) per a generalitzar el modelatge politòpic, i aquesta tesi proposa una versió més general d'alguns d'aquests resultats que incorpora planificació de guany. / Robles Ruiz, R. (2018). Contributions to nonlinear system modelling and controller synthesis via convex structures [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/100848

Controlling systems with uncertain dynamics is crucial in systems theory, especially for unmanned vehicles operating in challenging and unknown environments. One key application involves developing control methods to ensure collision-free trajectory tracking for unmanned surface vehicles (USVs) at sea. Modern control methods for such systems often encounter unwanted high-frequency oscillations, known as chattering, in the control signals. To address this, continuous approximations of discontinuous functions in the control law have proven effective in reducing chattering. This approach is integrated into a prescribed-performance control scheme, which has previously achieved asymptotic tracking for systems with uncertain dynamics. We employ Lyapunov stability analysis to determine if theoretical bounds for error performance can be smaller than the prescribed funnel functions when incorporating continuous approximations in a boundary-layer. For both first- and second-order systems, we show that system trajectories reach an arbitrarily small boundary-layer set in finite time. This allows us to derive a priori known error bounds that are smaller than the prescribed funnels. Simulations support the theoretical results, demonstrating a significant reduction in chattering while achieving asymptotic tracking errors two orders of magnitude smaller than the funnel functions.

In this paper we consider the problem of designing dynamic compensators to control a class of nonlinear parabolic distributed parameter systems. We concentrate on a system with unbounded input and output operators governed by Burgers’ equation. This equation provide a one dimensional model for certain convection—diffusion phenomena. A linearized model is used to compute a robust controller (MinMax), a LQG controller and a fixed-order-finite-dimensional control law (Optimal Projection) by minimizing various energy functionals. These control laws are then applied to the nonlinear model. Different approximation schemes are used to design suboptimal active feedback controllers. This approach provides important practical information. In particular, we show how functional gains can be used to locate new sensors. Numerical results are given to illustrate the basic ideas and to compare the various controllers. / Ph. D.

<p>Nonlinear systems occur in industrial processes, economical systems, biotechnology and in many other areas. The thesis treats methods for system identification and control of such nonlinear systems, and applies the proposed methods to a solar heating/cooling plant. </p><p>Two applications, an anaerobic digestion process and a domestic solar heating system are first used to illustrate properties of an existing nonlinear recursive prediction error identification algorithm. In both cases, the accuracy of the obtained nonlinear black-box models are comparable to the results of application specific grey-box models. Next a convergence analysis is performed, where conditions for convergence are formulated. The results, together with the examples, indicate the need of a method for providing initial parameters for the nonlinear prediction error algorithm. Such a method is then suggested and shown to increase the usefulness of the prediction error algorithm, significantly decreasing the risk for convergence to suboptimal minimum points. </p><p>Next, the thesis treats model based control of systems with input signal dependent time delays. The approach taken is to develop a controller for systems with constant time delays, and embed it by input signal dependent resampling; the resampling acting as an interface between the system and the controller.</p><p>Finally a solar collector field for combined cooling and heating of office buildings is used to illustrate the system identification and control strategies discussed earlier in the thesis, the control objective being to control the solar collector output temperature. The system has nonlinear dynamic behavior and large flow dependent time delays. The simulated evaluation using measured disturbances confirm that the controller works as intended. A significant reduction of the impact of variations in solar radiation on the collector outlet temperature is achieved, though the limited control range of the system itself prevents full exploitation of the proposed feedforward control. The methods and results contribute to a better utilization of solar power.</p>

Este trabalho apresenta o desenvolvimento, implementa&ccedil;&atilde;o e an&aacute;lise de t&eacute;cnicas de controle H 'INFINITO' n&atilde;o lineares para rob&ocirc;s manipuladores subatuados, sujeitos a incertezas param&eacute;tricas e dist&uacute;rbios externos. Na primeira parte, duas abordagens s&atilde;o consideradas para rob&ocirc;s manipuladores individuais subatuados. A primeira abordagem consiste em representar rob&ocirc;s manipuladores como um sistema n&atilde;o linear na forma quase-linear com par&acirc;metros variantes e utilizar t&eacute;cnicas de controle H 'INFINITO' para sistemas lineares a par&acirc;metros variantes baseadas em desigualdades matriciais lineares. Na segunda abordagem, uma solu&ccedil;&atilde;o expl&iacute;cita do problema de controle H 'INFINITO' n&atilde;o linear para rob&ocirc;s manipuladores &eacute; encontrada via teoria dos jogos diferenciais. Com este mesmo procedimento, implementam-se tamb&eacute;m os controles misto H'IND.2'/H 'INFINITO' n&atilde;o linear, adaptativo H 'INFINITO' n&atilde;o linear e adaptativo H 'INFINITO' n&atilde;o linear com redes neurais para rob&ocirc;s manipuladores. Tamb&eacute;m &eacute; desenvolvido um sistema tolerante a falhas para rob&ocirc;s manipuladores baseado em sistemas Markovianos e em controladores Markovianos H'IND.2', H 'INFINITO' e H'IND.2'/ H 'INFINITO'. Na segunda parte, o modelo din&acirc;mico de rob&ocirc;s manipuladores cooperativos subatuados &eacute; representado na forma de espa&ccedil;o de estados, possibilitando a aplica&ccedil;&atilde;o dos controladores H 'INFINITO' n&atilde;o lineares para controle de posi&ccedil;&atilde;o, juntamente com controle das for&ccedil;as de esmagamento, de um objeto. / This work presents the development, implementation and analysis of nonlinear H‡ control techniques applied to underactuated manipulators, under parametric uncertainties and external disturbances. At the first part, two approaches are considered for underactuated individual manipulators. The first approach consists in representing manipulators as nonlinear systems in the quasi-linear parameter varying form and in controlling them via H‡ control for linear parameter varying systems based on linear matrix inequalities. At the second approach, an explicit solution to the nonlinear H‡ control problem for manipulators is found via differential game theory. With this procedure, it is also implemented the nonlinear mixed H2/H‡, nonlinear adaptive H‡, and nonlinear adaptive H‡ with neural networks controls. Also is developed a fault tolerant system for manipulators based on Markovian systems and Markovian H2, H‡, and H2/H‡ controls. At the second part, the dynamic model of underactuated cooperative manipulators is represented in the state space form in order to apply the nonlinear H‡ controls to position control, plus the squeeze force control, of an object.