O objetivo deste trabalho é a otimização da distribuição dos divisores de potência utilizados em redes ópticas passivas, baseados na técnica de algoritmos genéticos, onde cada divisor possui uma única entrada e diversas saídas. O cenário prático de distribuição compreende uma determinada cidade, onde as ruas são as possíveis vias e as casas ou prédios são os possíveis terminais. Partindo de um ponto inicial (OLT - Optical Line Terminator), em geral a central de distribuição, chega-se aos usuários finais (ONUs - Optical Network Units) passando pelos divisores. Observa-se que temos pelo menos um ponto inicial (OLT) e diversos pontos de chegada (as ONUs) - dependendo da quantidade de saídas que o divisor óptico possui, cada uma destas representa um possível usuário ou outro divisor. O posicionamento dos divisores de potência e os caminhos utilizados que usaremos fazem parte de nossa solução. O conjunto destes elementos forma as redes de acesso óptico passivo (PON). Aspectos importantes considerados na otimização: (i) os comprimentos dos cabos desde a OLT até as ONUs, uma vez que ocorrem maiores degradações do sinal à medida que a distância aumenta, bem como aumentam os custos de implantação em proporção direta ao comprimento utilizado; e (ii) margem de potência no enlace e (iii) custo do enlace. Durante o processo de otimização, o algoritmo genético desenvolvido propõe um novo procedimento de busca de caminho denominado nó cíclico. Os resultados obtidos foram validados por comparações obtidas manualmente em redes de menor escala. Interfaces gráficas para carregamento de mapas urbanos a partir de aplicativos como Google map foram desenvolvidas. / This study, based on a genetic algorithm, optimizes the distribution of power dividers used, in the access, by passive optical networks, where each splitter has one input and several outputs. The practical scenario of distribution includes a particular city where the streets are the possible ways and the houses or buildings are the possible terminals. Starting from the OLT (Optical Line Terminal), in general the distribution center, the end users (ONUs - Optical Network Units) are connected to the OLT by a path with power divisions. Observe that we have at least one starting point (OLT) and several points of arrival (the ONUs) - depending on the amount of the optical splitter outputs, each of these representing a user. The positioning of the OLT, ONUs and power dividers are part of the solution we are seeking for and all these elements form the access passive optical network (PON). Important aspects considered: (i) the lengths of the cables from the OLT to the ONUs, once there are more signal degradation as the distance increases, (ii) link power budget and (iii) link cost. During the optimization process, the developed genetic algorithm proposes a new procedure for finding the optimum path which is called cyclic node. The obtained results have been validated by comparison with manual optimization in a smaller scale network. Graphical interfaces have been developed for uploading city maps from aplicatives Google maps.

Fault localization is the process of realizing the true source of a failure from a set of collected failure notifications. Isolating failure recovery within the network optical domain is necessary to resolve alarm storm problems. The introduction of the monitoring trail (m-trail) has been proven to deliver better performance by employing monitoring resources in a form of optical trails - a monitoring framework that generalizes all the previously reported counterparts. In this dissertation, the m-trail design is explored and a focus is given to the analysis on using m-trails with established lightpaths to achieve fault localization. This process saves network resources by reducing the number of the m-trails required for fault localization and therefore the number of wavelengths used in the network. A novel approach based on Geographic Midpoint Technique, an adapted version of the Chinese Postman’s Problem (CPP) solution and an adapted version of the Traveling Salesman’s Problem (TSP) solution algorithms is introduced. The desirable features of network architectures and the enabling of innovative technologies for delivering future millimeter-waveband (mm-WB) Radio-over-Fiber (RoF) systems for wireless services integrated in a Dense Wavelength Division Multiplexing (DWDM) is proposed in this dissertation. For the conceptual illustration, a DWDM RoF system with channel spacing of 12.5 GHz is considered. The mm-WB Radio Frequency (RF) signal is obtained at each Optical Network Unit (ONU) by simultaneously using optical heterodyning photo detection between two optical carriers. The generated RF modulated signal has a frequency of 12.5 GHz. This RoF system is easy, cost-effective, resistant to laser phase noise and also reduces maintenance needs, in principle. A revision of related RoF network proposals and experiments is also included. A number of models for Passive Optical Networks (PON)/ RoF-PON that combine both innovative and existing ideas along with a number of solutions for m-trail design problem of these models are proposed. The comparison between these models uses the expected survivability function which proved that these models are liable to be implemented in the new and existing PON/ RoF-PON systems. This dissertation is followed by recommendation of possible directions for future research in this area.

Orientadores: Nelson Luis Saldanha da Fonseca, Juliana Freitag Borin / Dissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Computação / Made available in DSpace on 2018-08-27T14:47:59Z (GMT). No. of bitstreams: 1 AstudilloTrujillo_CarlosAlberto_M.pdf: 2488879 bytes, checksum: 5004b31fcfcabbbf8528fe73f484da7d (MD5) Previous issue date: 2015 / Resumo: A crescente demanda por acesso banda larga móvel tem motivado a implantação da tecnologia long term evolution (LTE) pelas operadoras de redes móveis (MNOs), permitindo o fornecimento de novos serviços que demandam alta largura de banda e requisitos rigorosos de qualidade de serviço (QoS). Este aumento da demanda de banda passante leva à necessidade de um grande número de estações rádio base e ao aumento na quantidade de tráfego injetado no backhaul da rede móvel (MBH). Para lidar com os elevados custos do MBH, redes ópticas passivas (PONs) podem ser usadas para reduzir os custos do MBH usando sistemas fiber to anywhere (FTTx) já implantado bem como lidar com a crescente demanda por acesso banda larga à Internet por usuários móveis. Além disso, a estação rádio base LTE, também conhecida como evolved NodeB (eNB), pode ser integrada à unidade de rede óptica (ONU) das PONs em um dispositivo único, chamado ONU-eNB. A ONU-eNB compete pela largura de banda com outras ONUs em PONs, o que pode potencialmente prejudicar o fornecimento de QoS aos usuários móveis. Esta dissertação propõe um framework para provisão de QoS em redes móveis LTE que empregam backhaul baseado em redes ópticas passivas Ethernet (EPONs). Propõe também, um escalonador para redes LTE com o objetivo de prover requisitos de QoS e melhorar a vazão total. O framework introduz uma arquitetura funcional para o dispositivo integrado ONU-eNB, um esquema de mapeamento de QoS e um método para permitir que os escalonadores LTE atuais possam levar em conta informações disponíveis da rede de acesso móvel (LTE) bem com informações sobre a rede de backhaul (EPON), a fim de melhorar o desempenho total da rede, especialmente quando o enlace de backhaul está congestionado. Mostra-se como a implementação do framework proposto melhora a utilização da rede e a provisão de QoS em uma rede integrada, mesmo sob variação da carga de tráfego no backhaul e na rede LTE / Abstract: The increasing demand for mobile broadband access has motivated mobile network operators (MNOs) to deploy the long term evolution (LTE) technology, which allows the support of new services demanding large amount of bandwidth and strict QoS requirements. The growth of bandwidth demands will increase dramatically the number of base stations and the amount of traffic injected into the mobile backhaul (MBH) network. To cope with the high cost of MBH networks, passive optical networks (PONs) can be employed by using the already deployed fiber to anywhere (FTTx) systems. Moreover, the LTE base station, also known as evolved NodeB (eNB), can be integrated with the optical network unit (ONU) in a single device, called ONU-eNB, which competes for bandwidth with other ONUs in PONs. Such competition for bandwidth can jeopardize the support of mobile users¿ quality of service (QoS) requirements. This dissertation proposes a QoS provisioning framework for LTE mobile networks employing Ethernet PON (EPON)-based backhaul. It also introduces a novel LTE scheduler with the aim of supporting QoS requirements as well as high throughput. The framework includes a functional architecture for the ONU-eNB, a QoS mapping scheme and a method to allow current LTE schedulers to take into account both information available from the mobile access network (LTE) and information from the backhaul network (EPON) in order to improve the overall network performance, specially when the backhaul link is congested. It is shown how the proposed framework can improve network utilization and quality of service provisioning in an integrated network even under variations of traffic load in the backhaul and in the LTE networks / Mestrado / Ciência da Computação / Mestre em Ciência da Computação

Neste trabalho analisamos e propomos a utilização de TDM (Time Division Multiplexing) nativo canalizado/estruturado em redes PON (Passive Optical Network) com padrão GPON (Gigabit Passive Optical Network), com ênfase na estrutura de transmissão do legado das redes de telefonia. O objetivo principal é obter um aumento na eficiência de banda transmitida através da fragmentação de sinais E1 sem que seja necessário o uso de técnicas de emulação de circuito (que reduzem a eficiência de banda devido à adição de cabeçalhos). Inicialmente, é descrito o transporte TDM em redes GPON, como efetuado pelos equipamentos comerciais atuais através de duas técnicas: CES - Circuit Emulation Service e TDM nativo não estruturado. Em seguida, é introduzido o conceito de comutação digital visando sua aplicação no transporte TDM nativo estruturado em redes GPON. Nesta etapa, é proposta uma solução para este transporte, é descrito o protocolo utilizado bem como seu funcionamento. Por fim, como prova de conceito, é apresentada uma implementação em HDL (Hardware Description Language) para FPGA (Field Programmable Gate Array). / In this work we analyze and propose the use of native channeled /structured TDM (Time Division Multiplexing) in GPON (Gigabit Passive Optical Network), with emphasis on the structure for transmission of the telephone network legacy. The main target is to achieve an increase in transmitted bandwidth efficiency by fragmenting E1 signals, thus avoiding the use of circuit emulation techniques (which reduce the bandwidth efficiency due to overhead addition). Initially, it is described in TDM transport in GPON networks, as it is performed in present commercial equipment by two techniques: CES - Circuit Emulation Service and Native TDM - unstructured. Next, we introduce the concepts of digital switching aiming its application on the transport of native and structured TDM in GPON. At this stage, we propose a transport solution, describe its protocol and functionalities. Finally, for concept proof, we present an implementation in HDL (Hardware Description Language) meant to FPGA (Field Programmable Gate Array) application.

Neste trabalho analisamos e propomos a utilização de TDM (Time Division Multiplexing) nativo canalizado/estruturado em redes PON (Passive Optical Network) com padrão GPON (Gigabit Passive Optical Network), com ênfase na estrutura de transmissão do legado das redes de telefonia. O objetivo principal é obter um aumento na eficiência de banda transmitida através da fragmentação de sinais E1 sem que seja necessário o uso de técnicas de emulação de circuito (que reduzem a eficiência de banda devido à adição de cabeçalhos). Inicialmente, é descrito o transporte TDM em redes GPON, como efetuado pelos equipamentos comerciais atuais através de duas técnicas: CES - Circuit Emulation Service e TDM nativo não estruturado. Em seguida, é introduzido o conceito de comutação digital visando sua aplicação no transporte TDM nativo estruturado em redes GPON. Nesta etapa, é proposta uma solução para este transporte, é descrito o protocolo utilizado bem como seu funcionamento. Por fim, como prova de conceito, é apresentada uma implementação em HDL (Hardware Description Language) para FPGA (Field Programmable Gate Array). / In this work we analyze and propose the use of native channeled /structured TDM (Time Division Multiplexing) in GPON (Gigabit Passive Optical Network), with emphasis on the structure for transmission of the telephone network legacy. The main target is to achieve an increase in transmitted bandwidth efficiency by fragmenting E1 signals, thus avoiding the use of circuit emulation techniques (which reduce the bandwidth efficiency due to overhead addition). Initially, it is described in TDM transport in GPON networks, as it is performed in present commercial equipment by two techniques: CES - Circuit Emulation Service and Native TDM - unstructured. Next, we introduce the concepts of digital switching aiming its application on the transport of native and structured TDM in GPON. At this stage, we propose a transport solution, describe its protocol and functionalities. Finally, for concept proof, we present an implementation in HDL (Hardware Description Language) meant to FPGA (Field Programmable Gate Array) application.

The main goal of this diploma thesis was to implement the proposal of optical access networks in the selected location. Introduce is focused on the physical layer of network. This includes optical fibers, optical cables, connectors, optical splitters, and more. According to the place of termination of optical fiber will be studied best FTTx connections. According to network topology distinguished point to point and point to multipoint network. Networks points to point are also known as an active optical network and for each user are restricted to a separate fiber. Point to multipoint networks known as passive optical network. In terms of the PON is defined by many standards. For a selected location will be choice the most appropriate solution. Finally, the measurement will be made and will be considered for monitoring the route. Before the design of optical access networks, I made an illustrative simulation in program OptSim. Performed simulations helps to study the transmission characters of optical networks, depending on the physical architecture. In general, for the design of high-capabilities networks for large companies will be more appropriate active topology that provides due wavelength multiplexes high transmission capacity. To join in the urban areas with a large number of separate houses, it is more appropriate use of passive topology. For the design of optical networks has been selected location with multiple housing buildings. The end customer is not given the requirement for high data transfer rates as large companies. For the proposal was selected FTTB networks which is suitable because of lower costs. The second variant of the proposal was a passive optical network according to standard GPON. This standard was chosen because of the high splitting ratio. For both solutions was developed the entire proposal by ITU-T with a detailed drawing documentation. In the selected area was conducted measuring the optical networks in order to verify the possibility of extension actual solutions. For a sample issue of measurements, I made several measurements using optical reflectometer over an optical splitter in order to prove the need for measurements during construction. FTTH networks gaining in popularity more and more, but price is the limiting factor.

Στις μέρες μας, οι αυξανόμενες απαιτήσεις για υπηρεσίες υψηλού φασματικού εύρους ζώνης επιβάλλουν την ανάπτυξη νέων τεχνολογιών στο σχεδιασμό των δικτύων νέας γενιάς, ικανές να προσφέρουν α) χαμηλό κόστος κατά το σχεδιασμό του συστήματος, β) μεγάλη απόσταση μετάδοσης, γ) πολλοί χρήστες και δ) υψηλό εύρος ζώνης στην πλευρά του χρήστη για την παροχή των νέων υπηρεσιών. Ωστόσο, τα οπτικά δίκτυα λόγω των αναλογικών χαρακτηριστικών των οπτικών σημάτων τους, υποφέρουν από γραμμικές και μη γραμμικές παραμορφώσεις. Αυτές οι παραμορφώσεις επηρεάζουν άμεσα την απόδοση των συστημάτων και η επίδραση τους αυξάνει με την αύξηση του ρυθμού μετάδοσης. Παραδοσιακά χρησιμοποιούνται οπτικοί τρόποι για την εξομάλυνση των παραμορφώσεων. Ωστόσο, η ραγδαία ανάπτυξη στον τομέα των ηλεκτρονικών αναδεικνύει την ηλεκτρονική εξομάλυνση των παραμορφώσεων ως μία ευέλικτη, χαμηλού κόστους ολοκληρωμένη και βιώσιμη λύση που αποφεύγει τις επιπρόσθετες οπτικές απώλειες. Σκοπός της διδακτορικής διατριβής είναι η εξομάλυνση με αποδοτικό τρόπο των πιο σημαντικών παραμορφώσεων (χρωματική διασπορά, αυτοδιαμόρφωση φάσης και φαινόμενο αλληλουχίας φίλτρων) που δημιουργούνται στα οπτικά δίκτυα και ειδικότερα στα μητροπολιτικά δίκτυα, στα δίκτυα πρόσβασης, και στα παθητικά δίκτυα. Από σχεδιαστικής πλευράς του συστήματος, αυτή η διατριβή προτείνει τη βέλτιστη χρησιμοποίηση λύσεων χαμηλού κόστους, ικανές να επεκτείνουν (σε ρυθμό μετάδοσης και απόσταση) την χρησιμοποίησή τους σε οπτικά δίκτυα νέας γενιάς. Πιο συγκεκριμένα, η απόδοση της ηλεκτρονικής αντιστάθμισης μελετάται για συστήματα που χρησιμοποιούν χαμηλού κόστους, συμβατικούς πομπούς laser άμεσης διαμόρφωσης (DML), που οδηγούνται στα 10 Gb/s. Σκοπός σε αυτήν την περίπτωση είναι η αύξηση της απόστασης και του ρυθμού μετάδοσης που μπορεί να επιτευχθεί, εξομαλύνοντας τις παραμορφώσεις που δημιουργούνται εξαιτίας των χαρακτηριστικών των πομπών και αυτών που δημιουργούνται κατά τη μετάδοση του σήματος (χρωματική διασπορά, αυτοδιαμόρφωση φάσης και φαινόμενο αλληλουχίας φίλτρων) με την βέλτιστη χρησιμοποίηση ηλεκτρονικού εξισωτή. Επιπλέον, όσον αφορά τα παθητικά δίκτυα πρόσβασης νέας γενιάς, μελετάται μία αποδοτική και χρήσιμη τεχνική, χρησιμοποιώντας τα πλεονεκτήματα της χρήσης του ηλεκτρονικού εξισωτή στην πλευρά του δέκτη (OLT). Η πειραματική μελέτη εστιάζει στα παθητικά οπτικά δίκτυα (PON) στα 10 Gb/s χρησιμοποιώντας χαμηλού κόστους, χαμηλού εύρους ζώνης RSOA στην πλευρά του χρήστη (ONU), και ηλεκτρονικό εξισωτή στην πλευρά του δέκτη (OLT). Αυτή η τεχνική προσφέρει την απαιτούμενη ευελιξία για την προσαρμογή στις καινούργιες συνθήκες του συστήματος και την υλοποίηση των απαιτήσεων (πολύ μεγάλες αποστάσεις μετάδοσης, αριθμό χρηστών και ρυθμό μετάδοσης), ενώ ταυτόχρονα μπορεί και εκπληρώνει τις απαιτήσεις χαμηλού κόστους στην ανάπτυξη των μελλοντικών δικτύων πρόσβασης νέας γενιάς. / Nowadays, the rapid increase in bandwidth demanding services imposes new technological directions in the design of next generation optical networks with the purpose to achieve: a) reduced cost, b) larger transmission distances, c) larger number of users and d) higher bandwidth connectivity to the end user. However, due to the analogue nature of the optical signals, the optical networks suffer from a variety of linear and non-linear impairments. These impairments have a direct impact in the signal’s bit error rate performance, while their effect increases as bit rate increases. The compensation of impairments has been traditionally performed by optical means. However, the rapid increase in available electronic processing power has made electronic mitigation of impairments a viable option, leading to an adaptive, low cost and integrated solution which avoids additional optical losses. The goal of this thesis is to study the effective mitigation by electronic means of the most important impairments (i.e. chromatic dispersion, self phase modulation and filter concatenation) that are related with optical networks and particularly metropolitan, access and passive optical networks. From the network (and system) design point of view, this study proposes the optimum use of certain low cost solutions able to extend (in bit rate and coverage) the applicability of next generation optical networks. More specifically, the effectiveness of electronic equalization is examined for systems utilizing low cost, conventional directly modulated laser (DML) sources that are operated at 10 Gb/s. The purpose in this case is to extend the reach and operating data rate of these systems by mitigating the transmission limiting effects due to the source characteristics and the link impairments (dispersion, self-phase modulation, and filter concatenation) with the optimum use of electronic equalization. Moreover, with respect to next generation optical access networks an effective and useful design approach on PON systems is fully investigated, by using the benefits of electronic equalization at the receiver side (ΟLT). This experimental system studies are focusing on PON systems operated at 10 Gb/s by using low cost and low bandwidth RSOAs at the ONU side assisted by electronic equalization at the receiver (ΟLT). This technique offers the required flexibility for the optimum adaptation on the specific network characteristics (in terms of covered distance, number of users and bit rate) and additionally meets the requirements for the development and further extension of future low cost optical access networks.

The main goal of this diploma thesis is to design of high-speed optical network. The first part deals with theoretical knowledge in the field of optical transmissions, especially principle of wavelength division multiplexing. Generally speaking, this part is dedicated to optical connections over long distances. It will concentrate on different types of wavelength division multiplexing, optical fiber amplifiers and other basic optical components. Then it discusses influence of negative effects acting on optical transmission and discusses how to reduce or suppress their influence. Subsequently, there is designed backbone network in the Czech Republic in OptiSystem 7.0 software and are verified some mentioned theoretical knowledge. One of chapters also presents results of measurements of real optical routes in our state. The second part of the diploma thesis moves its attention on that part of optical network, which provides data connectivity to end users, that means it is focused on optical access network. There are described the most common topologies, standards and components. Based on these findings, in the last chapter, there is worked out design of optical access network FTTH (more precisely FTTD) in the selected location. Afterwards, the design is transferred to the OptiSystem 7.0 software, where is verified its functionality.

O presente trabalho descreve o desenvolvimento e implementação de duas configurações distintas de um receptor optoeletrônico integrado. A primeira configuração é similar a um projeto encontrado na literatura mas apresenta diversas modificações que lhe conferiram melhor desempenho em comparação ao projeto original. A segunda configuração é uma nova proposta deste trabalho. O receptor foi desenvolvido e implementado visando sua aplicação em redes de comunicações ópticas passivas (PONs) de alta velocidade comutadas a pacote, para possibilitar a utilização da técnica de multiplexação em comprimento de onda (WDM), aumentando assim a capacidade de transmissão da rede, em particular no ramo de ligação da rede de serviços com o usuário final, denominado rede de acesso. O principal objetivo do receptor aqui desenvolvido foi proporcionar uma sintonia rápida entre os canais disponíveis na rede, possibilitando sua seleção num tempo inferior àquele necessário para a transmissão de um único pacote de informação, diminuindo assim o atraso de sintonia e, por conseguinte, a perda de informação. Para tanto, os circuitos integrados implementados e caracterizados referem-se aos circuitos de chaveamento eletrônico e do amplificador de transimpedância das duas configurações investigadas. Os dados experimentais obtidos para as duas configurações confirmaram a previsão de chaveamento dos canais de entrada num intervalo de tempo da ordem de alguns nanosegundos, o que é totalmente compatível com a velocidade de transmissão das aplicações a que se destina este receptor (aproximadamente 5 Gbits/s). Adicionalmente, são apresentados os dados experimentais relativos à freqüência de corte, ganho direto, isolação, relação on/off e características de ruído dos circuitos implementados. / The present work describes the design and implementation of two configurations of an integrated optoelectronic receiver. The first one is similar to a previously reported design but with some modifications to improve its performance. The second one is a new proposal of this work. The goal of the receiver design and implementation was its application in high bit rate packet-switched passive optical networks (PONs) employing the wavelength division multiplexing (WDM) technique to increase the network capacity, in particular on the connection branch of the network core with the final user, the access network. The main goal of the receiver design was to achieve a fast channel tuning, allowing a tuning time smaller than the required for the transmission of a single information packet, decreasing the tuning latency and, therefore, the rate of information packet loss. In order to accomplish this goal, the implemented and tested integrated circuits include the electronic switching circuit and the transimpedance amplifier for both configurations investigated. The measured data for both configurations confirm the expected input channel switching time results, of about a few nanoseconds, which is certainly useful for the expected bit rate of operation (approximate 5 Gbps). Additionally, experimental results concerning cutoff frequency and bandwidth, direct gain, isolation, on/off ratio, and noise characteristics of both implemented circuits are presented.

Η παρούσα διδακτορική διατριβή πραγματεύεται την ανάλυση και προσομοίωση τηλεπικοινωνιακών δικτύων πολυδιάστατης κίνησης, ενώ δίνεται ιδιαίτερη έμφαση στα οπτικά δίκτυα. Βασικός σκοπός της διατριβής αποτελεί η ανάπτυξη αναλυτικών μοντέλων για τον υπολογισμό παραμέτρων απόδοσης του δικτύου, όπως η πιθανότητα απώλειας σύνδεσης, πιθανότητα απώλειας κλήσης, η καθυστέρηση μετάδοσης και το ποσοστό χρησιμοποίησης του καναλιού μετάδοσης. Τα προτεινόμενα αναλυτικά μοντέλα διαφοροποιούνται ανάλογα με την τεχνολογία δικτύου. Οι τεχνολογίες αυτές είναι: Α) Οπτικά δίκτυα δρομολόγησης μήκους κύματος. Β) Οπτικά δίκτυα πρόσβασης. Γ) Ασύρματα δίκτυα πρόσβασης στο Διαδίκτυο. Για οπτικά δίκτυα δρομολόγησης μήκους κύματος αρχικά μελετάται η περίπτωση απλής οπτικής ζεύξης, ενώ στη συνέχεια εξετάζεται δίκτυο πολλαπλών κόμβων τυχαίας τοπολογίας. Επίσης, προτείνονται αναλυτικά μοντέλα για την περίπτωση της μεταγωγής οπτικών πακέτων με την αποτίμηση της απόδοσης ενός οπτικού διακόπτη, αλλά και δικτύου μεταγωγής οπτικών πακέτων τυχαίας τοπολογίας. Ακολούθως, προτείνονται αναλυτικά μοντέλα για την αποτίμηση της απόδοσης παθητικών οπτικών δικτύων, τα οποία υλοποιούν διαφορετικές μεθόδους πολλαπλής πρόσβασης. Για την περίπτωση της πολλαπλής πρόσβασης με διαίρεση χρόνου μελετάται το παθητικό οπτικό δίκτυο Ethernet, το οποίο υποστηρίζει πολυδιάστατη κίνηση. Αναφορικά με την πολυπλεξία με διαίρεση μήκους κύματος μελετάται ένα υβριδικό παθητικό οπτικό δίκτυο σε επίπεδο κλήσεων. Οι κλήσεις διακρίνονται ανάλογα με τη διαδικασία άφιξης σε τυχαίες και ψευδοτυχαίες κλήσεις, ανάλογα με τις απαιτήσεις σε εύρος ζώνης σε κλήσεις με σταθερές και ελαστικές απαιτήσεις και ανάλογα με τη συμπεριφορά τους κατά την παραμονή τους στο δίκτυο σε κλήσεις σταθερού ρυθμού μετάδοσης και σε κλήσεις οι οποίες εναλλάσσονται μεταξύ ενεργών περιόδων μετάδοσης και περιόδων σιγής. Τέλος, προτείνονται αναλυτικά μοντέλα υπολογισμού απωλειών για την περίπτωση της πολλαπλής πρόσβασης με διαίρεση οπτικού κώδικα, τα οποία λαμβάνουν υπ’όψιν πολλαπλές υπηρεσίες, την παρουσία προσθετικού θορύβου, αλλά και τη δραστηριότητα του χρήστη. Για την αποτίμηση της απόδοσης ασύρματων δικτύων πρόσβασης στο Διαδίκτυο προτείνονται αναλυτικά μοντέλα, τα οποία υλοποιούν το πρωτόκολλο ΙΕΕΕ 802.11 ή το πρωτόκολλο ΙΕΕΕ 802.11e. Η προτεινόμενη ανάλυση υπολογίζει τόσο τη διεκπεραιωτική ικανότητα του δικτύου, όσο και τη συνολική καθυστέρηση μετάδοσης πακέτου ως συνάρτηση της καθυστέρησης στο ασύρματο μέσο και της καθυστέρησης στην ουρά αναμονής. Σε όλες τις περιπτώσεις η ακρίβεια των προτεινόμενων μοντέλων πιστοποιείται/ελέγχεται με την προσομοίωση του δικτύου στον υπολογιστή. / In this PhD dissertation multi-rate models are examined for the performance analysis of telecommunication networks through mathematical analysis and simulation. Particular emphasis is given to optical networks. The main goal is the development of analytical models for the calculation of network performance metrics, such as blocking probabilities, transmission delay and utilization of the common channel. The proposed analytical models are distinguished according to the network technologies. Three different technologies are considered: A) Wavelength routed optical networks. B) Optical access networks. C) Wireless Internet access networks. Multi-rate loss models are proposed for the performance evaluation of wavelength routed optical networks. Firstly, the case of a single link is considered and then a mesh all-optical network is examined. In addition, analytical models are proposed for Optical Packet Switching (OPS) networks, for the case of an all-optical OPS switch and of an OPS mesh network. Multi-rate analytical models are proposed for the evaluation of the performance of Passive Optical Networks (PONs) implementing different multiple access methods. For the case of Time Division Multiple Access (TDMA) the Ethernet PON is studied, which supports multiple service-classes. Regarding the Wavelength Division Multiplexing (WDM) PONs a hybrid WDM-TDMA PON is considered and the call-level performance is evaluated. Calls are distinguished by their arrival process, which can be random or quasi random, by their bandwidth requirements, which can be fixed of elastic and by their behavior during their service, which can be calls of fixed transmission rate or calls that alternate between ON and OFF periods. Finally multi-rate loss models are proposed for the case of Optical Code Division Multiple Access (OCDMA) PONs that take into account the user activity and the presence of additive noise in the transmission channel. For the performance analysis of wireless Internet access networks analytical models are proposed, which implement the IEEE 802.11 protocol or the IEEE 802.11e protocol. The proposed analysis calculated the saturation throughput and the end-to-end packet delay as a function of the Medium Access Control (MAC) delay and the queueing delay. In all cases the accuracy of the proposed models is validated through simulation.