[pt] Os mosquitos são os principais vetores de transmissão de doenças como zika, dengue e chikungunya, causando mais de 700 mil casos por ano. O uso de repelentes, principalmente formulações tópicas, é uma das melhores medidas de proteção para reduzir e/ou prevenir a transmissão de muitas doenças transmitidas por insetos. Neste trabalho, formulamos emulsões de DEET/óleo em água para liberação controlada de repelentes como estratégia para desenvolver formulações repelentes com tempo de proteção superior a 6 h. Investigamos os efeitos do valor de HLB na estabilidade e viscosidade das emulsões, usando uma mistura de surfactantes (Span 80 e Tween 80) para formular emulsões em uma faixa de HLB entre 4-14. Também avaliamos o tamanho das gotas, comportamento reológico, método de mistura e índice de estabilidade da emulsão. As emulsões de DEET-óleo-em-água desenvolvidas contendo N, N-dietil-3-metilbenzamida (DEET) foram estabilizadas usando dois nanomateriais carregados negative e positivamente, nanopartículas de sílica (SiNP) e nanofibrilas de celulose catiônica (CCNF), e uma mistura de surfactantes não iônicos de grau para evitar a precipitação por agregação eletrostática. Os resultados indicam que no HLB 10, esta mistura pode estabilizar as emulsões independentemente do tipo de óleo (mineral ou vegetal), e as emulsões apresentam comportamento newtoniano independentemente do método de mistura. As formulações foram estáveis por mais de quatro meses à temperatura ambiente, mostrando-se fortemente resistentes à desestabilização por estresse centrífugo e térmico quando se utiliza nanomateriais em combinação com surfactantes. O CCNF e o SiNP mantiveram a distribuição granulométrica estável devido ao aumento da viscosidade da fase contínua. A ação combinada desses materiais na estabilização da fase oleosa contendo DEET diminuiu significativamente a taxa de liberação do composto ativo em comparação com o DEET não emulsificado, produzindo uma liberação sustentada de DEET nas primeiras 6 h. / [en] Mosquitoes are the main vectors of transmission of diseases such as zika, dengue and chikungunya, causing more than 700,000 cases per year. The use of repellents, mainly topical formulations, is one of the best protective measures to reduce and/or prevent the transmission of many insect-borne diseases. In this work, we formulated DEET/oil-in-water emulsions for the controlled release of repellents as a strategy to develop repellent formulations with a protection time greater than 6 h. We investigated the effects of the HLB value on the stability and viscosity of the emulsions, using a blend of surfactants (Span 80 and Tween 80) to formulate emulsions in an HLB range between 4-14. We also evaluated droplet size, rheological behavior, mixing method and emulsion stability index. The developed DEET-oil-in-water emulsions containing N, N-diethyl-3-methylbenzamide (DEET) were stabilized using two positively and negative charged nanomaterials, silica nanoparticles (SiNP) and cationic cellulose nanofibrils (CCNF), and a blend of food-grade nonionic surfactants to prevent precipitation by electrostatic aggregation. The results indicate that at HLB 10, this mixture can stabilize the emulsions regardless of the type of oil (mineral or vegetable), and the emulsions present Newtonian behavior regardless of the mixing method. The formulations were stable for more than four months at room temperature, showing to be strongly resistant to destabilization by centrifugal and thermal stress when using nanomaterials in combination with surfactants. The CCNF and SiNP kept the droplet size distribution stable due to the increase in the viscosity of the continuous phase. The combined action of these materials in stabilizing the DEET-containing oil phase significantly decreased the rate of active compound release compared to non-emulsified DEET, producing a sustained release of DEET within the first 6 h.

Dans ce manuscrit, la synthèse et la caractérisation complète de différents matériaux hybrides dédiés à des applications dans le domaine optique ou thérapeutique sont décrites. Dans un premier temps, des systèmes macroscopiquement ordonnés sont obtenus par intercalation de colorants tels que le Styryl 722 ou la pyronine-Y dans plusieurs films à base d’argile de type smectite. Les films d’argile sont élaborés par spin-coating et les colorants intercalés par immersion des films dans les solutions de ces colorants. Les effets de l’argile sur les propriétés des colorants sont analysés en détail et leur orientation préférentielle dans l’espace inter-couches est étudié grâce à la réponse anisotropique des films en lumière linéairement polarisée. Dans la deuxième partie, la synthèse par chimie sol-gel de monolithes de silice de grande dimension contenant des colorants laser présentant une forte absorption et une émission de fluorescence dans le visible est abordée. Des colorants laser à l’état solide (SSDL) avec de bonnes stabilités photochimique, thermique et chimique sont ainsi proposés. Dans le troisième chapitre, la synthèse par voie sol-gel de nanoparticules de silice (NP) d’environ 50 nm de diamètre fonctionnalisées sur leur surface externe est ensuite décrite. Grâce à l’encapsulation de molécules de colorants fluorescents dans leur cœur et le greffage de photosensibilisateurs sur leur écorce, des nanoparticules biocompatibles adaptées à la bio-imagerie et la thérapie photodynamique (PDT) ont été préparées. Pour optimiser leurs performances, les propriétés photophysiques et plus particulièrement la production d’oxygène singulet d’une nouvelle série de photosensibilisateurs basés sur les chromophores de type PODIPY ont d’abord été étudiées en détail. A partir de ces résultats, des BODIPY particulièrement efficaces ont été greffés sur les nanoparticules de silice afin de les utiliser pour la PDT. Les propriétés photophysiques de ces matériaux ont été analysées par spectroscopie d’absorption et de fluorescence (stationnaire ou résolue en temps) et les rendements quantiques de production d’oxygène singulet déterminés par des méthodes directe (émission de luminescence de l’oxygène singulet à 1270 nm) ou indirecte (utilisation de sondes chimiques spécifiques à l’oxygène singulet). Par ailleurs les matériaux hybrides ont été complètement caractérisés par plusieurs techniques (SEM, TEM, XRD, XPS, IR, DLS, BET). / Along this manuscript different hybrid materials are synthesized and extensively characterized for several uses: from optical to therapeutic applications. First, by the intercalation of different dyes, styryl 722 and pyronine-Y into several smectite clay films, macroscopically ordered system are obtained. Clay films are elaborated by spin-coating technique and the dyes are intercalated by the immersion of clay thin films into dye solutions. The effect of clay on the dye properties is deeply analyzed and its preferential orientation in the interlayer space of the clay is studied by the anisotropic response of the films to the linear polarized light. Second, large silica monoliths with embedded laser dyes with strong absorption and fluorescence bands in different region of the Visible spectrum are attained by sol-gel chemistry to obtain solid-state dye laser (SSDL) with good photo, thermal and chemical stabilities. Third, silica nanoparticles (NP) with suitable size (50 nm) and functionalized external surface are also synthesised by sol-gel chemistry. Through the encapsulation of fluorescent dye molecules in their core and by the grafting of photosensitizers on their shell, biocompatible nanoparticles for bio-imaging and Photodynamic Therapy (PDT) applications are prepared. In order to optimize their properties, a careful investigation of the photophysical properties and mainly the singlet oxygen generation of a large range of new photosensitizers based on chromophores known as BODIPYs, is previously carried out. Based on these results, some efficient BODIPYs are selected for grafting on silica nanoparticles in order to use them for PDT. The photophysical properties of all these hybrid materials are analyzed by absorption and fluorescence (steady-state and time correlated) spectroscopies, and the singlet oxygen measurements are monitored by direct method (recording the singlet oxygen luminescence at 1270 nm) and by indirect method (using selective chemical probe). Moreover, the hybrid materials are fully characterized by several techniques such as, SEM, TEM, XRD, XPS, IR, DLS, BET.

The increasing demands for biopharmaceuticals to treat different diseases have raised concerns about controlling the quality and efficacy of such pharmaceuticals. The design and formulation of a stable protein or peptide based biopharmaceutical runs into the limitation that at high concentrations (> 100 mg/ml) or during long storage process the drug undergoes aggregation. During synthesis, purification, storage or packaging of these drugs different kinds of stresses like chemical, oxidative, thermal, shear, etc. are encountered. These stresses promote the non-native aggregation of protein and peptide based drugs. Injection or administration of such drugs if contaminated with aggregates causes patient discomfort or development of an antibody which can adversely affect patient’s conditions. This brings out the necessity of finding a way so that such aggregation is avoided. Nanoparticles have been used as vehicles for drug delivery and diagnostic agents in biology for a while. The surface of the nanoparticles is known to adsorb small as well as large molecules with different kinetics and energetics of interaction. I have used nanoparticles to adsorb proteins to protect them against aggregation when they are subjected to denaturing conditions. The effectiveness of the nanoparticles in stopping protein aggregation, recovery of the proteins and reversibility of the adsorption process, the catalytic activity of the proteins before and after adsorption on the surface have all been studied in details. The work described here has been divided in 8 chapters and the contents of each chapter are described below. In Chapter 1 I have provided a brief introduction to the protein aggregation problem. The motivation and scope of the current work has been presented in this chapter. Materials and methods have been described in Chapter 2. Synthesis of gold and silica nanoparticles, their characterization and stability under experimental conditions have been illustrated in this chapter. The spectroscopic assays and techniques which I have used to study the effect of gold and silica nanoparticles on protein aggregation have been discussed at lengths in this chapter. In Chapter 3 I have demonstrated the effect of gold nanoparticles on thermal aggregation of alcohol dehydrogenase (ADH). The size of the nanoparticle was varied in the range of 15-60 nm and the effect was measured by various spectroscopic assays and techniques. I have observed that gold nanoparticles prevent thermal aggregation of ADH and the efficiency is high. Gold nanoparticles in nanomolar or even picomolar concentrations are capable of preventing the aggregation of ADH at micromolar concentrations. In Chapter 4 the role of gold nanoparticles as suppressor of protein aggregation was extended to another protein, insulin. Chemically induced aggregation of insulin using dithiothreitol (DTT) in the presence of gold nanoparticles was studied in the same manner as was done for ADH. Similar prevention property of gold nanoparticles was established by making the observation independent of the method of denaturation or the type of protein used in the prevention experiments. In Chapter 5 huge second harmonic light scattering (SHS) signal from pure gold nanoparticles has been used to measure the free energy of interaction of ADH and insulin with nanoparticles in solution, for the first time. The change in the second harmonic scattered signal was monitored which decreased steadily as a function of added protein concentration to the aqueous solution of gold nanoparticles. The fitting of the second harmonic signal decay was done with a modified Langmuir adsorption isotherm to extract the free energy change in the interaction and the number of protein molecules adsorbed on the surface. In Chapter 6 I have demonstrated a way to recover the adsorbed ADH and insulin from the gold nanoparticle surface and tested the activity of ADH by an assay. The structure of the proteins in the adsorbed state has been probed by CD spectroscopy and described in this chapter. It is found that ADH retains its activity in the adsorbed state. Both the proteins retain the native secondary structures in their adsorbed state. However, the structures change drastically under denaturing conditions. In Chapter 7 the effect silica nanoparticles which are known to have hydrophilic surface has been examined on the aggregation of ADH and insulin in pretty much the same way as was done with gold nanoparticles. The efficiency of silica nanoparticle was found to be lower compared to gold nanoparticles. In addition, the size dependency of prevention efficiency of silica and gold nanoparticles was found to be completely opposite to each other. In Chapter 8 I have presented the overall summary and possible future directions of this work

Ce travail a porté sur la caractérisation et la quantification en 3D de la répartition de charges de différents types (nanoparticules, nanotubes, etc.) dans des matrices polymères. Nous nous focalisons sur les techniques de tomographie en microscopie électronique. Une approche multiple en tomographie électronique a été réalisée : la tomographie en FIB/MEB (faisceau d’ions focalisé/microscope électronique à balayage), la tomographie en MEB et la tomographie en MET (microscope électronique en transmission). Les nanocomposites polymère sont généralement élaborés aux fins d’améliorer les propriétés physiques (mécanique, électrique, etc.) du matériau polymère constituant la matrice, grâce à une addition contrôlée de charges nanométriques. La caractérisation de tels matériaux, et l’établissement de corrélations précises entre la microstructure et les propriétés d’usage, requièrent une approche tri-dimensionnelle. En raison de la taille nanométrique des charges, la microscopie électronique est incontournable. Deux systèmes de nanocomposite polymère ont été étudiés par une approche multiple de tomographie électronique : P(BuA-stat-S)/MWNTs (copolymère statistique poly (styrène-co-acrylate de butyl) renforcé par des nanotubes de carbone multi-parois), et P(BuA-stat-MMA)/SiO2 (copolymère statistique poly(butyl acrylate-co-methyl methacrylate) renforcé par des nanoparticules de silice). Par combinaison de divers techniques, la caractérisation et la quantification des nanocharges ont été possibles. En particulier, la taille, la fraction volumique et la distribution des charges ont été mesurées. Cette étude a ainsi fourni des informations en 3D qui contribuent à mieux comprendre les propriétés des nanocomposites. Une attention particulière a été portée aux artefacts et causes d’erreur possibles durant l’étape de traitement 3D. Nous avons également essayé de comparer les différentes techniques utilisées du point de vue de leurs avantages et inconvénients respectifs, en dégageant des possibilités d’amélioration future. / This work is focused on the characterization and quantification of the 3D distribution of different types of fillers (nanoparticles, nanotubes, etc.) in polymer matrices. We have essentially used tomography techniques in electron microscopy. Multiple approaches to electron tomography were performed: FIB-SEM (focused ion beam/scanning electron microscope) tomography, SEM tomography and TEM (transmission electron microscope) tomography. Polymer nanocomposites are basically synthesized in order to improve the physical properties (mechanical, electric, etc.) of the pure polymer constituting the matrix, by a controlled addition of fillers at the nanoscale. The characterization of such materials and the establishment of accurate correlations between the microstructure and the modified properties require a three-dimensional approach. According to the nanometric size of the fillers, electron microscopy techniques are needed. Two systems of polymer nanocomposites have been studied by multiple electron tomography approaches: P(BuA-stat-S)/MWNTs (statistical copolymer poly(styrene-co-butyl acrylate) reinforced by multi-walled carbon nanotubes) and P(BuA-stat-MMA)/SiO2 (statistical copolymer poly(butyl acrylate-co-methyl methacrylate) reinforced by silica nanoparticles). By combining various techniques, the characterization and the quantification of nanofillers were possible. In particular, statistics about size, distribution and volume fraction of the fillers were measured. This study has then provided 3D information, which contributes to a better understanding of properties of the nanocomposites. Attention has been paid to analyze carefully original data, and artifacts and causes of errors or inaccuracy were considered in the 3D treatments. We also attempted to compare benefits and drawbacks of all techniques employed in this study, and perspectives for future improvements have been proposed.

La vaste gamme de combinaisons possibles de cations et anions, ainsi que les excellentes propriétés intrinsèques des liquides ioniques (LIs) peuvent être considérées comme les principaux facteurs qui ont conduit au développement d’une recherche utilisant des LIs comme additifs des matériaux polymère. Ainsi, l'objectif principal de ce travail est d'explorer le rôle de la nature du cation et/ou du anion du LI sur les propriétés des matériaux basées de poly (méthacrylate de méthyle) (PMMA). Dans une première partie, des LIs de type imidazolium et ammonium ont été incorporés au PMMA et des caractérisations morphologiques et structurales ont été effectuées afin de comprendre leur impact sur les propriétés thermiques, viscoélastiques et mécaniques des matériaux résultants. Dans la section suivante, la capacité de ces LIs à base d'imidazolium et d'ammonium en tant qu’agents interfaciaux à la surface de la silice a été évaluée. Sub-micro et nanoparticules de silice, ainsi que les LIs, ont été incorporées dans une matrice de PMMA afin de préparer des composites. L'amélioration des propriétés des matériaux ont été discutées en fonction du degré auquel chaque LI influence la compatibilité entre les particules et la matrice polymère. De plus, ces composites ont été exposés au dioxyde de carbone en état supercritique (scCO2) pour utiliser celui-ci comme agent moussant et ainsi produire des matériaux expansés. Le rôle du LI et des particules de silice pour structurer les matériaux expansés a été analysé. Dans la dernière partie de cette étude, le scCO2 est utilisé comme milieu de réaction pour la modification chimique par greffage de la surface des nanoparticules de silice par des LIs de type imidazolium, contenant également des groupes hydrolysables et différentes chaînes alkyles. Le rôle de la pression et la quantité de LI ajoutées au milieu de réaction, ainsi que la longueur de la chaîne alkyle des LIs se sont avérées essentielles pour contrôler le degré de fonctionnalisation des nanoparticules. Enfin, ces nanoparticules modifiées ont été incorporées dans une matrice PMMA. Des analyses de morphologie ont été utilisées pour évaluer la dispersion des particules dans la matrice et les propriétés physico-chimiques de ces matériaux ont été également étudiées. / The large array of cation/anion combinations, and the excellent intrinsic properties of ionic liquids (ILs) open a large range of possibilities in their use as additives to polymer materials. Thus, the main objective of this work is to explore the role of both the cation and anion of a series of ILs on the properties of poly(methyl methacrylate) (PMMA)-based materials. In a first approach, low amounts of imidazolium and ammonium-based ILs were incorporated as additives to PMMA in the molten state. Morphological and structural characterizations were developed in order to understand the impact of the presence of such ILs on the thermal and mechanical properties of the resulting materials. Then, in the following section, the ability of the same imidazolium and ammonium-based ILs as physical modifiers of silica surface was evaluated. In such an approach, ILs were supposed to act as interfacial agents. Sub-micron and nanosize silica particles were used to prepare PMMA composites. Thus, the extents of each IL improve the interfacial interaction between PMMA and silica particles were discussed. In addition, supercritical carbon dioxide (scCO2) was used as foaming agent to produce foamed PMMA-based composites. In such a case, the combined effect of the presence of ILs and silica particles was analyzed regarding the morphology of the foamed structures. In the last section, scCO2 was used as reaction medium, in an environmental friendly approach, to chemically modify silica nanoparticles using a series of imidazolium IL-functionalized silanes (with different alkyl chain lengths). Thermogravimetric analysis (TGA) was used to highlight the effect of the working pressure and the content of such ILs in the reaction medium. The effect of the alkyl chain length on the grafting density of the resulting nanoparticles was also discussed. Finally, novel PMMA-based nanocomposites were prepared by the incorporation of such grafted nanoparticles. Transmission electron microscopy (TEM) and small-angle neutron scattering (SANS) analyses were used to evaluate the state of dispersion of the particles into the polymer matrix. Moreover, the thermal, rheological and mechanical properties of the materials were studied.