Submitted by Haroudo Xavier Filho (haroudo.xavierfo@ufpe.br) on 2016-04-22T17:22:07Z No. of bitstreams: 2 license_rdf: 1232 bytes, checksum: 66e71c371cc565284e70f40736c94386 (MD5) UNIVERSIDADE FEDERAL DE PERNAMBUCO_SANDRA_VERSÃO FINAL_2015.pdf: 2139559 bytes, checksum: e490501d790358d3a45c1e36eb66e72c (MD5) / Made available in DSpace on 2016-04-22T17:22:07Z (GMT). No. of bitstreams: 2 license_rdf: 1232 bytes, checksum: 66e71c371cc565284e70f40736c94386 (MD5) UNIVERSIDADE FEDERAL DE PERNAMBUCO_SANDRA_VERSÃO FINAL_2015.pdf: 2139559 bytes, checksum: e490501d790358d3a45c1e36eb66e72c (MD5) Previous issue date: 2015-02-10 / FACEPE / A Terapia Fotodinâmica Antimicrobiana (TFDa) tem sido proposta como um método alternativo para o tratamento de infecções causadas por micro-organismos como bactérias e fungos. Tal técnica baseia-se na ação simultânea de uma fonte luminosa e um agente fotossensibilizador, que na presença de luz, geraa produção de oxigênio singleto e espécies reativas de oxigênio que ao interagirem com componentes celulares, promovem a morte celular desses micro-organismos. Esse estudo teve como objetivo avaliar a ação da TFDa explorando nanopartículas de prata (com tamanho médio de 13 nm) e moléculas de riboflavina(157 μM) em conjunto com um LED (Light Emitting Diode) com comprimento de onda no azul (λ=455 ± 20nm), sobre cepas de Streptococcus mutans, Pseudomonas aeruginosae Candida albicans. As cepas de S. mutans foram repicadas em BHI (Brain Infusion Heart) e incubadas em estufa bacteriológica a 37ºC, em atmosfera de 5% de CO2 por 48 he os inóculos de P. aeruginosa foram cultivados e estocados em TSA (Tryptic Soy Agar), em presença de O2, a 37º C, por 24 horas. Decorrido o tempo de incubação, colônias dos micro-organismos foram suspensas em Phosphate Buffered Saline (PBS) a uma densidade de1x107 Unidades Formadoras de Colônia (UFC)/mL.As culturas de Candida albicansforam cultivadas em meio SAB+Y (Agar Sabouraud Dextroseenriquecido com extrato de levedura). A incubação foi realizada à temperaturade 37ºC, durante período de 24 horas. Em seguida,foram preparadassuspensões com concentração de 5x106 células/mL,correspondente à turbidez de 0,5 na escala McFarland.O experimento foi dividido em doze grupos–o grupo controle, o grupo apenas com o tratamento com a luz (L), tratamento com a riboflavina (Rb), utilização da prata (Ag) e o sistema NPsAgRb+L. Posterior aotratamento, foi realizado diluição seriada e as placasincubadas a 37 ºC por 24 horas para bactérias e 48 hs para Candida sp. Ao final foi realizada a contagem de UFC/mLde ambos os micro-organismos. Os resultados foram submetidos à análise estatística descritiva. Na redução de UFC/mL foi estatisticamente significante em culturas de S. mutans com redução de 3 logs no número de células viáveis após 6 minutos de irradiação (p ˂0,05).A inativação fotodinâmica contra P. aeruginosa não foi observada estatística significativa após tratamento (p > 0,05). O mesmo foi observado nas culturas de C. albicans(p > 0,05), concluindo-se que a utilização de nanopartículas próximas ao fotossensibilizador foi eficiente contra bactérias Gram-positivas. / Antimicrobial Photodynamic Therapy (TFDA) has been proposed as an alternative method for treating infections caused by microrganisms such as bacteria and fungi. This technique is based on the simultaneous action of a light source and a photosensitizing agent, in the presence of light, generates the singlet oxygen and reactive oxygen species to interact with cellular components and promote cell death of these microrganisms. This study aimed to evaluate the action of TFDa exploring silver nanoparticles (with an average size of 13 nm) and riboflavin molecules (157 mM) in conjunction with an LED (Light Emitting Diode) with a wavelength in the blue (λ = 455 ± 20nm) on Streptococcus mutans, Pseudomonas aeruginosa and Candida albicans. The strains of S. mutans were subcultured in BHI (Brain Heart Infusion) and incubated in bacteriological incubator at 37 ° C in an atmosphere of 5% CO2 for 48 h and the inocula of P. aeruginosa were grown and stored in TSA (Tryptic Soy Agar) in the presence of O2 at 37ºC for 24 hours. After the incubation time, colonies of microrganisms were suspended in Phosphate Buffered Saline (PBS) at a density of 1x107 colony forming units (CFU)/mL. The Candida albicans cultures were grown in SAB + Y (Sabouraud Dextrose Agar enriched with yeast extract). Incubation was carried out at 37°C temperature for 24 hours. Then, suspensions were prepared with a concentration of 5x106 cells/mL, corresponding to 0.5 on the McFarland turbidity scale. The experiment was divided into twelve groups - a control group, the only group with treatment with light (L), treatment with riboflavin (Rb), use of silver (Ag) and NPsAgRb + L system. After the treatment was carried out serial dilutions and the plates incubated at 37°C for 24 hours for bacteria and 48 hours for Candida sp. At the end it was performed CFU counts / ml of both microrganisms. The results were submitted to descriptive statistical analysis. The reduction of CFU/mL was statistically significant in cultures of S. mutans to 3 logs reduction in the number of viable cells after 6 minutes of irradiation (p ˂ 0.05). The photodynamic inactivation against P. aeruginosa was no statistically significant after treatment (p> 0.05). The same was observed in cultures of C. albicans (p> 0.05), it was concluded that the use of nanoparticles next to the photosensitizer was effective against Gram-positive bacteria.

Orientador: Oswaldo Luiz Alves / Tese (doutorado) - Universidade Estadual de Campinas, Instituto de Química / Made available in DSpace on 2018-08-27T15:35:46Z (GMT). No. of bitstreams: 1 Moraes_AnaCarolinaMazarinde_D.pdf: 5504556 bytes, checksum: ff8566e313e82701925549e2ecd544ab (MD5) Previous issue date: 2015 / Resumo: O óxido de grafeno (GO) é uma forma quimicamente modificada de grafeno que possui grupos funcionais contendo oxigênio (epóxi, carboxila, carbonila, e hidroxila) distribuídos sobre a base e as bordas de suas folhas. Devido à abundância dos grupamentos oxigenados, o GO tem sido usado como uma plataforma para suportar e estabilizar nanoestruturas metálicas, tais como nanopartículas de prata (NPAgs), visando aplicações biológicas. Além disso, devido à sua excelente capacidade de dispersão e elevada área superficial, o GO tem sido considerado uma carga promissora para a construção de compósitos poliméricos. Neste trabalho, relatamos a síntese do GO e dos nanocompósitos de óxido de grafeno funcionalizado com NPAgs (GO-Ag) os quais podem ser utilizados como agentes antibacterianos de amplo espectro. O GO foi sintetizado por meio do método de Hummers modificado, e o GO-Ag foi preparado através da redução in situ dos íons de prata por citrato de sódio. As folhas de GO foram funcionalizadas com NPAgs esféricas de diâmetro médio de 9,4 nm. Estes nanocompósitos exibiram excelente atividade antimicrobiana contra as principais bactérias em ambiente hospitalar, tais como Escherichia coli, Enterococcus faecalis, Acinetobacter baumannii, e Staphylococcus aureus resistente à meticilina. Os nanocompósitos GO-Ag também foram aplicados como eficazes agentes antimicrobianos a fim de evitar a proliferação bacteriana em membranas de micro e ultrafiltração. Neste sentido, membranas antimicrobianas de acetato de celulose (CA) foram fabricadas a partir da incorporação de GO e GO-Ag na matriz polimérica (CA-GOAg). Após a funcionalização, as membranas permeáveis modificadas com GO-Ag foram capazes de inativar cerca de 90% das células de E. coli em comparação com as membranas de CA não modificadas. Os resultados sugerem que a incorporação de nanocompósitos GO-Ag é uma abordagem promissora para controlar o desenvolvimento da adesão bacteriana em membranas de purificação de água. Com relação à demanda de novos materiais com elevada estabilidade e com capacidade de proteção contra radiação ultravioleta (UV), foram fabricados filmes compósitos transparentes a partir de acetato de celulose e óxido de grafeno. A caracterização físico-química revelou que as folhas de GO estão bem dispersas por toda a matriz polimérica, proporcionando filmes compósitos lisos e homogêneos. Em comparação com os filmes pristinos de CA, os filmes compósitos exibiram melhor capacidade de proteção contra radiação UV combinado com transparência óptica à luz visível, o que reforça a sua aplicação como revestimentos transparentes com proteção UV para alimentos, produtos farmacêuticos, biomédicos, e produtos eletrônicos / Abstract: Graphene oxide (GO) is a chemically modified form of graphene that possesses oxygen-containing groups (epoxy, carboxyl, carbonyl, and hydroxyl) distributed on the plane and edges of the sheets. Owing to the abundance of oxygenated groups, GO has been used as a platform to support and stabilize metallic nanostructures such as silver nanoparticles (AgNPs), aiming biological applications. In addition, GO has been considered a promising material for building polymeric composites because of its excellent dispersibility and high surface area. In this work, we report the synthesis of GO and GO functionalized with AgNPs (GO-Ag) for use as a broad-spectrum antibacterial agent. GO was synthesized through the modified Hummers method, and the GO-Ag was prepared through the in situ reduction of silver ions by sodium citrate. Spherical AgNPs with average size of 9.4 nm were found well-dispersed throughout the GO sheets. This nanocomposite exhibited excellent antimicrobial activity against common nosocomial bacteria such as Escherichia coli, Enterococcus faecalis, Acinetobacter baumannii, and methicillin-resistant Staphylococcus aureus. GO-Ag nanocomposites were also applied as an effective antimicrobial agent in order to prevent the bacterial proliferation on micro and ultrafiltration membranes. Cellulose acetate (CA) membranes were then fabricated from the incorporation of GO and GO-Ag into the polymeric matrix (CA-GOAg). After functionalization, the permeable CA membranes modified with GO-Ag were able to inactivate mostly 90% of E. coli cells compared to the non-modified CA membranes. The results suggest that the incorporation of GO-Ag nanocomposites is a promising approach to control biofouling development in water purification membranes. Concerning the demand for novel ultraviolet shielding materials with high stability, transparent and UV-shielding composite films were fabricated by casting a mixture of GO with cellulose acetate (CA). The physicochemical characterization revealed that GO sheets were well-dispersed throughout the polymeric matrix, providing smooth and homogeneous composite films. By comparison with pristine CA films, the composite films displayed an improved UV-shielding capacity combined with optical transparency under visible light, which underscores their application as transparent UV-protective coatings for food, pharmaceutical, biomedical, and electronic products / Doutorado / Quimica Inorganica / Doutora em Ciências

Nanotechnology is currently one of the fastest growing scientific disciplines. An interesting area of research is the biosynthesis of metal nanoparticles using microorganisms including lactic acid bacteria. In the first part this diploma thesis focuses on verification of identity of bacterial species Lactobacillus casei and Lactobacillus paracasei by genus- and species-specific PCR. In the next part of experimental work the capability of six Lactobacillus strains to produce silver nanoparticles is tested. Synthesis of nanoparticles was confirmed for all the strains depending on the amount of added AgNO3 and on time of cultivation. Differences between the strains were detected.

>Magister Scientiae - MSc / Combating antimicrobial resistant infections caused by nosocomial pathogens poses a major public health problem globally. The widespread use of broad-spectrum antibiotics for the treatment of wound infections has led to the appearance of multidrug-resistant (MDR) microbes which further exacerbates the growth of microbes amongst patients. It may result in prolonged debility of the patient and an increase in healthcare costs due to prolonged hospital stays and expensive treatment regimens to avoid patient-patient transmission. Therefore, it is imperative that alternative sources of treatment to antimicrobial use in wound infections needs to be developed in order to inhibit or kill resistant microbes and to provide point of care medical treatment to the less fortunate at an affordable cost. / 2021-08-30

Supracrystals are highly symmetrical ordered superstructures built up from nanoparticles via self-assembly. While the NP assembly has been intensively investigated, the formation mechanism is still not understood. To shed some light onto the formation mechanism, we are using one of the most common supracrystal morphologies, the trigonal structures, as a model system to investigate the formation process in solution. To explain the formation of the trigonal structures and determining the size of the supracrystal seeds formed in solution, we introduce the concept of substrate-affected growth. Furthermore, we show the influence of the NP concentration on the seed size and extend our investigations from Ag towards Au. 1.

>Magister Scientiae - MSc / Nanotechnology has emerged as an elementary division of modern science and stemmed directly from green chemistry twelve basic concepts, it receives global attention due to its unique character and ample applications. It also has great potential to mitigate the challenges they face in various fields, especially medical sector. Nanodrugs are increasingly considered as a potential candidate to carry therapeutic agents safely into a targeted compartment in an organ, particular tissue or cell. In this study, twenty (20) Libyan plants were selected and evaluated for their potential to synthesis gold and silver nanoparticles. The screening of the different plant extracts was performed using 96 well plate method at 25 °C and 70 °C. The NPs formation was confirmed and characterized using UV- Vis, DLS, HR-TEM and EDX. A well-defined NPs were obtained at high temperature (70 °C). The Au NPs had an average diameter of 92 nm at 25 °C and 66 nm at 70 °C. The zeta potential values were observed to be negative (-14 to -24) and indicate the stability of the Au NPs. The HR-TEM showed polydispersity, which decreased at higher temperature (70 °C). The stability of Au NPs in nutrient broth prior was conducted as well. All the Au NPs under study showed stability, only minimal changes in the UV-Vis spectra can be observed. Two plant extract viz Pistacia atlantica, Junipers phoenicea showed consistent results and forming stable and smaller NPs compared to others, both of the plant extracts and the corresponding NPs were tested against Streptococcus mutans and showed MIC value ~ 49 g/mL. In case of silver NPs, two plant extracts viz J. phoenicea, Rosmarinus officinalis, showed superior results than the others; both plants produced stable and small Ag NPs. The antibacterial activity against S. mutans demonstrated MIC valus ~ 50 g/mL. The synthesised NPs showed a promising bioactivity for developments of new antibacterial agents against S. mutans strains. Dose-dependent activity was observed for the tested NPs.

Das Ziel der vorliegenden Arbeit war die Entwicklung eines neuartigen Abscheideverfahrens für Dünnschichten aus Polymer-Metall-Nanokompositen sowie die Charakterisierung sensorischer und antibakterieller Eigenschaften von ersten, mit diesem System abgeschiedenen Komposit-Schichten . Durch den Einbau eines rotierenden Probenhalters zwischen den beiden Plasmaquellen ist es möglich, Plasmapolymere und metallische Nanopartikel als Einzelschichten, Komposite oder Multischichten abzuscheiden. Mit der Gasflusssputterquelle werden Silber-Nanopartikel einer Größe von 1,8…20 nm mit einer Verteilungsbreite der gewichteten Normalverteilung von 0,1…2,7 nm durch Kathodenzerstäubung und anschließende Agglomeration der Cluster in der Gasphase generiert. Die Entladungsbedingungen, welche durch die Elektronentemperatur und -dichte charakterisiert werden, zeigen eine sprunghafte Änderung bei Drücken von 70…85 Pa und einer Spannung von 550 V. Ab einem Gasfluss von 3 slpm kehrt sich die Proportionalität zwischen zugeführter elektrischer Leistung und Elektronentemperatur um. Dies wird durch die vermehrte Emission von Sekundärelektronen erklärt. Die abgeschiedenen Partikel sind aus verschieden orientierten Clustern aufgebaut. Durch Kühlung des Substrates wurde nachgewiesen, dass eine Agglomeration auf dem Substrat nur bei Gasflüssen von 5 slpm stattfindet. Anhand der Auswertung von faktoriellen Versuchsplänen wurde gezeigt, dass der Gasfluss auf die Partikelgröße und Abscheiderate den größten Einfluss hat. Die Präkursoren Styrol, Methylmethacrylat und 3-Methyl-1,2-butadien wurden durch Plasmapolymerisation in einer 60 MHz-Linearquelle als dünne, homogene Schichten im nm-Bereich abgeschieden. Aus den Emissionsspektren von Argon konnten, unter Verwendung des Stoß-Strahlungs-Modells, Elektronendichten von 6*1010…1,5*1011 cm-3 und Elektronentemperaturen von 3…9 eV in Abhängigkeit von der Verweilzeit der Monomermoleküle im Plasma sowie des Energieeintrages berechnet werden. Die Elektronen haben bei Energieeinträgen oberhalb von 6*107 J/kg genügend Energie, um -Bindungen des Kohlenstoffs in der Gasphase zu spalten. Die freien Radikale initiieren Oxidationsreaktionen, was zur Bildung von Carbonylverbindungen in Schichten aus Styrol- und Isoprenplasmapolymeren führt. Die mit XPS-Messungen gefundenen hohen Sauerstoffgehalte der Plasmapolymer-Schichten konnten durch Kontaktwinkelmessungen bestätigt werden. Die Quellungsmessungen in organischen Lösungsmitteln (Aceton, Ethanol, Chloroform, Toluol) mit reflektometrischer Interferenzspektroskpie bestätigen die Tendenzen der Kontaktwinkelmessung im Fall von Styrol und Methylmethacrylat. Die Abscheiderate der Plasmapolymere wird besonders durch den Energieeintrag beeinflusst. Dabei zeigt sich nur bei Isopren eine deutliche Auswirkung der Abbaureaktionen.Die Härte der Isopren-Schichten korreliert ebenfalls mit der Elektronendichte. Die Perkolationsschwelle der Silber-Plasmapolymer-Nanokomposite liegt bei einem Füllgrad von 57 %, was typisch für Partikel mit geringem Aspektverhältnis ist. Die Schichten reagieren selektiv auf Dämpfe der Lösungsmittel. Bisher war die Langzeitstabilität von Membranen zur Trinkwasseraufbereitung durch Ultrafiltration durch das starke Wachstum von Mikroorganismen auf der Membranoberfläche eingeschränkt. Dies konnte durch die Beschichtung mit Silber-MMA-Kompositen verbessert werden. Durchflussmessungen an behandelten Membranen sowie elektronenmikroskopische Aufnahmen bestätigen die gute antibakterielle Wirkung der Beschichtung.

Plasmonic properties of self-assembled silver nanoparticles/nanowires array on periodically patterned Si (100) substrate are reported with special attention on the mechanism of nanoparticles self-assembly. The advantage of this bottom up approach over other self-assembling and lithographic methods is the flexibility to tune array periodicity down to 20 nm with interparticle gaps as low as 5 nm along the ripple. Ripple pattern have shallow modulation (~2 nm) still particles self-assembly was observed in non-shadow deposition. Therefore adatoms diffusion and kinetics is important on ripple surface for the self-assembly. PVD e-beam evaporation method used for deposition has proven to be superior to sputter deposition due to lower incident flux and lower atom energy. It was found that particles self-assembly largely dependent on angle of incidence, substrate temperature, and deposition direction due to ripple asymmetric tilt. Ostwald ripening observed during annealing on ripples substrate has striking dependency on ripple periodicity and was found to be different compared to Ostwald ripening on flat Si surface. In-situ RBS measurements of deposited silver on flat and rippled substrate confirmed different sticking of atoms on the two surfaces. The difference between maximum and minimum of the calculated local flux show a peak at an incidence angle of 70o with respect to surface normal. This explains the best alignment of particles at this angle of incidence compare to others. Self-assembled nanoparticles are optically anisotropic, i.e. they exhibit a direction dependent shift in LSPR. The reason of the observed anisotropy is a direction dependent plasmonic coupling. Different in plane and out of the plane dielectric coefficients calculated by modelling Jones matrix elements, confirms that nanoparticle/nanowire array are biaxial anisotropic (ex ¹ ey ¹ ez). The nanoparticles are predominantlyinsulating while nanowires are both metallic and insulating depending on the dimension. Silver nanoparticles/nanowires self-aligned on pre-patterned rippled substrate are presented for the first time as an active SERS substrate. Anisotropic SERS response in such arrays is attributed to different field enhancement along and across the ripples. Strong plasmonic coupling in elongated nanoparticles chain results in significantly higher SERS intensity then spherical nanoparticles/nanowires and non-ordered nanoparticles. Higher SERS intensity across the nanowires array in comparison to along the array (bulk silver) confirms electromagnetic field enhancement (hot-junction) is responsible for SERS phenomenon. Self-assembly of cobalt nanoparticle on ripple pattern substrate is also reported. Due to less adatom mobility and higher sticking cobalt self-assembly is possible only at much higher temperature. A strong uniaxial magnetic anisotropy was observed not observed for non ordered cobalt particles.

Mechanism underlying nanotoxicity has remained elusive. Hence, efforts to understand whether nanoparticle properties might explain its toxicity are ongoing. Considering three different types of organo-coated silver nanoparticles (AgNPs): citrate-coated AgNP, polyvinylpyrrolidone-coated AgNP, and branched polyethyleneimine-coated AgNP, with different surface charge scenarios and core particle sizes, herein we systematically evaluate the potential role of particle size and surface charge on the toxicity of the three types of AgNPs against two model organisms, Escherichia coli and Daphnia magna. We find particle size, surface charge, and concentration dependent toxicity of all the three types of AgNPs against both the test organisms. Notably, Ag+ (as added AgNO3) toxicity is greater than each type of AgNPs tested and the toxicity follows the trend: AgNO3>BPEI-AgNP>Citrate-AgNP>PVP-AgNP. Modeling particle properties using the general linear model (GLM), a significant interaction effect of primary particle size and surface charge emerges that can explain empirically-derived acute toxicity with great precision. The model explains 99.9% variation of toxicity in E. coli and 99.8% variation of toxicity in D. magna, revealing satisfactory predictability of the regression models developed to predict the toxicity of the three organo-coated AgNPs. We anticipate that the use of GLM to satisfactorily predict the toxicity based on nanoparticle physico-chemical characteristics could contribute to our understanding of nanotoxicology and underscores the need to consider potential interactions among nanoparticle properties to explaining nanotoxicity.

Tesis por compendio / [EN] In the present Doctoral Thesis, different strategies to improve functional properties of starch films for food packaging applications were analysed: study of the effect of amylose:amylopectin ratio, blend with other polymers poly(vinyl alcohol) (PVA), and incorporation of different fillers (rice bran and cellulose nanocrystals-CNCs) and antimicrobial agents (neem oil-N, oregano essential oil-O and silver nanoparticles-AgNPs). Likewise, a biodegradation study of the films as affected by antimicrobials was carried out. Among different starches with distinct amylose:amylopectin ratio, pea starch was selected with higher values of this ratio. The high content of amylose gave rise to stiffer and more resistant to fracture films, with lower oxygen permeability, which decreased during storage. Pea starch-PVA (S-PVA) blend films represented a good strategy to improve film properties without a notable increase in cost. The PVA addition led to films which were less water soluble and not as sensitive to water sorption, more extensible and resistant than neat starch films, while they maintained the high oxygen barrier and provided stability to the matrix during ageing. In this sense, S-PVA ratios near to 1:1 are recommendable. When rice bran with the smallest particle size was used as filler, it improved the elastic modulus of the films, but reduced the film stretchability and barrier properties, due to the enhancement of the water binding capacity and the introduction of discontinuities in the matrix. Incorporation of CNCs into S-PVA films, as a reinforcing material, enhanced phase separation of polymers, did not imply changes in water vapour barrier of the films but improved the film mechanical performance: they became stiffer and more stretchable, while crystallization of PVA was partially inhibited. Silver loaded S-PVA films exhibited antimicrobial activity against the fungi (Aspergillus niger and Penicillium expansum) and bacteria (Listeria innocua and Escherichia coli) genera, depending on the silver concentration. Silver nanoparticles provoked notable changes in the film colour and transparency but no relevant changes in the other physical properties. Silver was completely delivered to aqueous simulants within the firsts 60 minutes of contact, but the film release capacity drastically decreased in the non-polar simulant, where the overall migration limit for food contact packaging materials (60 mg/Kg simulant) was accomplished. So, the use of the developed films as food packaging materials should be restricted to fat-rich foodstuffs. The incorporation of oregano essential oil (O), as antimicrobial agents, into the S-PVA matrix gave rise to active films against bacteria and fungi, whereas films containing neem oil (N) were not effective. Higher O concentration in the films was required to observe antifungal effect with respect to the antibacterial activity. Oils did not notably affect water sensitivity and water barrier properties of the films, but at high ratio, oils implied weaker film networks, affecting their mechanical performance. Blend of starch with PVA significantly improved PVA biodegradation and disintegration behaviour. Incorporation of silver species to S-PVA films slowed down their biodegradation kinetics while increased their degradation ratio. However, no significant effect of O was observed on the biodegradability indices despite the antimicrobial activity detected for this oil. N even promoted biodegradation of S-PVA films. Finally, a food application of biopolymer coatings was studied, using chitosan and essential oils (oregano or rosemary) to prevent weight loss and fungal development of semi-hard goat's milk cheeses. Coating were highly effective at reducing fungal growth and cheese weight loss while slightly reduced lipolytic and proteolytic activities in the cheese. Sensory evaluation revealed that the cheeses double coated with chitosan-oregano oil were the best evaluated in terms of aroma and flavour. / [ES] En la Tesis Doctoral, se han analizado diferentes estrategias para mejorar las propiedades funcionales de películas de almidón para aplicaciones de envasado de alimentos: el estudio del ratio amilosa:amilopectina, mezclas con otros polímeros (alcohol de polivinilo-PVA), y la incorporación de diferentes refuerzos (salvado de arroz y nanocristales de celulose-CNCs) y agentes antimicrobianos (aceite de neem-N, aceite esencial de orégano-O y nanopartículas de plata-AgNPs). También se realizó un estudio de biodegradación de las películas observando el efecto de los antimicrobianos. Entre los diferentes almidones con distinto ratio amilosa:amilopectina, se seleccionó el almidón de guisante con altos valores de amilosa. El alto contenido en amilosa dio lugar a películas más rígidas y resistentes a la fractura, con baja permeabilidad al oxígeno, la cual disminuyó durante el almacenamiento. Las películas de mezcla de almidón-PVA (S-PVA) representaron una buena estrategia para mejorar las propiedades de las películas sin incrementar notablemente el precio. La adición de PVA dio lugar a películas menos solubles en agua, menos sensibles a su absorción y más extensible y resistentes que las de almidón puro, mientras mantuvieron alta barrera al oxígeno y dieron estabilidad a la matriz durante el envejecimiento. Son recomendables los ratios de S-PVA cercanos a 1:1. El salvado de arroz con menor tamaño de partícula, mejoró el modulo elástico de las películas, pero su extensibilidad y propiedades barrera empeoraron debido a la mejor capacidad de retención de agua y a las discontinuidades introducidas. La incorporación de CNCs en las películas de S-PVA incrementó la separación de fases de los polímeros, sin cambios en la permeabilidad al vapor de agua, y mejoró las prestaciones mecánicas: películas más rígidas y extensibles, mientras que inhibió parcialmente la cristalización del PVA. Las películas de S-PVA con partículas de plata exhibieron actividad antimicrobiana contra dos hongos y dos bacterias, dependiendo de la concentración de plata. Las AgNPs provocaron cambios en el color de las películas así como en su transparencia. La plata fue completamente liberada en los primeros 60 minutos en contacto con simulantes acuosos, sin embargo la liberación disminuyó en simulantes no polares, donde se cumple el límite de migración global. Por lo tanto, el uso de las películas desarrolladas para envasado de alimentos debe ser restringido a productos alimenticios ricos en grasas. La incorporación de O en la matriz de S-PVA dio lugar a películas activas contra bacterias y hongos, mientras que las películas con N no fueron efectivas. Se necesitaron concentraciones más altas de O en las películas para observar un efecto antifúngico respecto a la actividad bactericida. Los aceites no afectaron notablemente la sensibilidad ni las propiedades barreras al agua de las películas, aunque la mayor proporción de aceite dio lugar a películas con una red más débil, afectando sus prestaciones mecánicas. La mezcla de S con PVA mejoró significativamente el comportamiento de biodegradación y desintegración de las películas. La incorporación de AgNPs a películas de S-PVA disminuyó su cinética de biodegradación mientras aumentó su ratio de degradación. La adición de O no presentó efecto significativo en el índice de biodegradación a pesar de la actividad antimicrobiana detectada. El N incluso mejoró la biodegradación de las películas. Finalmente, se realizó una aplicación de recubrimientos basados en biopolímeros, usando quitosano-CH y aceite esencial de orégano o romero para evitar la pérdida de peso y el desarrollo de hongos en quesos de cabra semicurados. Los recubrimientos fueron efectivos en la reducción del crecimiento fúngico y la pérdida de peso de los quesos, mientras que la actividad lipolítica y proteolítica ligeramente disminuyó. El análisis sensorial reveló q / [CA] S'han analitzat diferents estratègies per a millorar les propietats funcionals de pel·lícules de midó per a aplicacions d'envasat d'aliments: l'estudi de la ràtio amilosa:amilopectina, mescles amb altres polímers (alcohol polivinílic-PVA), i la incorporació de diferents reforços (segó d'arròs i nanocristalls de celulosa-CNCs) i agents antimicrobians (oli de neem-N, oli essencial d'orenga-O i nanopartícules de plata). També es va fer un estudi de biodegradació de les pel·lícules per observar l'efecte dels antimicrobians. Entre els diferents midons amb distint ràtio amilosa:amilopectina, es va seleccionar el midó de pèsol amb alts valors d'amilosa. L'alt contingut en amilosa va donar lloc a pel·lícules més rígides i resistents a la fractura, amb baixa permeabilitat a l'oxigen, la qual va disminuir durant l'emmagatzemament. Les pel·lícules de mescla de S-PVA van representar una bona estratègia per a millorar les propietats de les pel·lícules sense incrementar notablement el preu. L'addició de PVA va donar lloc a pel·lícules menys solubles en aigua, menys sensibles a la seua absorció i més extensible i resistents que les de midó pur. A més van mantenir l'alta barrera a l'oxigen i van donar estabilitat a la matriu durant l'envelliment. Son recomanables les ràtios de S- PVA pròxims a 1:1. El segó d'arròs amb menor tamany de partícula, va millorar el mòdul elàstic de les pel·lícules, però la seua extensibilitat i propietats barrera van empitjorar. La incorporació de CNCs en les pel·lícules de S-PVA, va incrementar la separació de fases dels polímers, sense implicar canvis en la permeabilitat al vapor d'aigua, però millorant les prestacions mecàniques: pel·lícules més rígides i extensibles, al mateix temps que es va inhibir parcialment la cristal·lització del PVA. Les pel·lícules de S-PVA amb partícules de plata van exhibir activitat antimicrobiana front a dos de fongs i dos bacteris, depenent de la concentració de plata. Les AgNPs van provocar canvis en el color de les pel·lícules així com en la seua transparència. La plata va ser completament alliberada en els primers 60 minuts en contacte amb simulants aquosos. La capacitat d'alliberament va disminuir en simulants no polars, on es complix el límit de migració global. Per tant, l'ús de les pel·lícules desenvolupades per a l'envasat d'aliments ha de ser restringit a productes alimentaris rics en greixos. La incorporació d'O en la matriu de S-PVA va donar lloc a pel·lícules actives front a bacteris i fongs. Pel contrari les pel·lícules amb N no van ser efectives. Van ser necessàries concentracions més elevades d'O en les pel·lícules per a observar un efecte antifúngic respecte a l'activitat bactericida. Els olis no van afectar la sensibilitat a l'aigua ni les propietats barrera a l'aigua de les pel·lícules, però la major proporció d'oli va donar lloc a pel·lícules amb una xarxa més dèbil, afectant les seues prestacions mecàniques. La mescla de S amb PVA va millorar significativament el comportament de biodegradació i desintegració. La incorporació de partícules de plata a pel·lícules de S-PVA va disminuir la seua cinètica de biodegradació mentre que va augmentar la seua ràtio de degradació. No obstant això, l'addició d'O no va presentar un efecte significatiu en els índexs de biodegradació a pesar de l'activitat antimicrobiana detectada. L'N fins i tot va millorar la biodegradació de les pel·lícules de S-PVA. Finalment, es va realitzar una aplicació de recobriments basats en biopolímers, fent ús de quistosà-CH i olis essencials de orenga i romer per evitar la pèrdua de pes i el desenvolupament de fongs en formatges de cabra semi-curats. Els recobriments van ser altament efectius en la reducció del creixement fúngic i la pèrdua de pes dels formatges. L'activitat lipolítica i proteolítica en els formatges va disminuir suaument. L'anàlisi sensorial va revelar que els form / Cano Embuena, AI. (2015). Different strategies to improve the functionality of biodegradable films based on starch and other polymers [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/55383 / TESIS / Premios Extraordinarios de tesis doctorales / Compendio