<p> The major purpose of the work described in this thesis has been the development of an analytical model for the electron-beam pumped semiconductor laser system consistent with the main dynamic effects observed experimentally in the stimulated emission. The lasing mat4:!rials used in this study were single crystals of CdS, CdS1e and GaAs. The choice was made on the basis of the availability of high purity single crystals and for representation of both II-VI and III-V materials in the study. </p> <p> Generally, the light output from a pulse-excited semiconductor laser changes in both wavelength and far-field pattern as a function of time during the excitation pulse. The effects investigated divide naturally into two parts. The first part deals with the tuning of the peak output of the stimulated emission toward lower energies during the excitation pulse. The second part deals with a deviation of the far-field radiation pattern of the spatial laser mode with respect to the cavity axis and the changes of this angle with time during the pump pulse. </p> <p> In parallel with these investigations, a theoretical model of the semiconductor laser was developed. This model takes into account spatial variations in the gain and refractive index in the semiconductor material and changes in these profiles with time. The analysis, in terms of the experimental parameters, leads to a prediction of angular tuning of the far-field mode and can account for certain features of faster-than-bandgap wavelength tuning in a number of disparate laser materials. A particularly significant consequence of the model is the prediction of dramatic variations in cavity loss as a function of time. The major consequences of this effect for laser dynamics are discussed. </p> / Thesis / Doctor of Philosophy (PhD)

No description available.

No description available.

Imaging at the nanoscale and/or at remote locations holds great promise for studies in fields as disparate as the life sciences and materials sciences. One such microscopy technique, stimulated emission depletion (STED) microscopy, is one of several fluorescence based imaging techniques that offers resolution beyond the diffraction-limit. All current implementations of STED microscopy, however, involve the use of free-space beam shaping devices to achieve the Gaussian- and donut-shaped Orbital Angular Momentum (OAM) carrying beams at the desired colors –-- a challenging prospect from the standpoint of device assembly and mechanical stability during operation. A fiber-based solution could address these engineering challenges, and perhaps more interestingly, it may facilitate endoscopic implementation of in vivo STED imaging, a prospect that has thus far not been realized because optical fibers were previously considered to be incapable of transmitting the OAM beams that are necessary for STED. In this thesis, we investigate fiber-based STED systems to enable endoscopic nanoscale imaging. We discuss the design and characteristics of a novel class of fibers supporting and stably propagating Gaussian and OAM modes. Optimization of the design parameters leads to stable excitation and depletion beams propagating in the same fiber in the visible spectral range, for the first time, with high efficiency (>99%) and mode purity (>98%). Using the fabricated vortex fiber, we demonstrate an all-fiber STED system with modes that are tolerant to perturbations, and we obtain naturally self-aligned PSFs for the excitation and depletion beams. Initial experiments of STED imaging using our device yields a 4-fold improvement in lateral resolution compared to confocal imaging. In an experiment in parallel, we show the means of using q-plates as free-space mode converters that yield alignment tolerant STED microscopy systems at wavelengths covering the entire visible spectrum, and hence dyes of interest in such imaging schematics. Our study indicates that the vortex fiber is capable of providing an all-fiber platform for STED systems, and for other imaging systems where the exploitation of spatio-spectral beam shaping is required.

Surface plasmon-polaritons are optical surface waves formed through the interaction of photons with free electrons at the surface of metals. They offer interesting applications in a broad range of scientific fields such as physics, chemistry, biology, and material science. However, many of such applications face limitations imposed by the high propagation losses of these waves at visible and near-infrared wavelengths, which result mainly from power dissipation in the metal. In principle, the propagation losses of surface plasmon-polaritons can be compensated through optical amplification. The objective of this thesis is to provide deeper insights on the physics of surface plasmon-polariton amplification and spontaneous emission in surface plasmon-polariton amplifiers through theoretical and experimental vehicles applied (but not necessarily restricted) to a particular plasmonic mode termed long-range surface plasmon-polariton. On the theoretical side, the objective is approached by developing a realistic theoretical model to describe the small-signal amplification of surface plasmon-polaritons in planar structures incorporating dipolar gain media such as organic dye molecules, rare-earth ions, and quantum dots. This model takes into account the inhomogeneous gain distribution formed near the metal surface due to a non-uniform excitation of dipoles and due to a position-dependent excited-state dipole lifetime that results from near-field interactions between the excited dipoles and the metal. Also, a theoretical model to describe the amplified spontaneous emission of surface plasmon-polaritons supported by planar metallic structures is developed. This model takes into account the different energy decay channels into which an exited dipole located in the vicinity of the metal can relax. The validity of this model is confirmed through experimentation. On the experimental side, the objective is approached by providing a direct experimental demonstration of complete loss compensation in a plasmonic waveguide. The experiments are conducted using the long-range surface plasmon-polariton supported by a symmetric thin gold waveguide incorporating optically pumped organic dye molecules in solution as the gain medium. Also, an experimental study of spontaneous emission in a long-range surface plasmon-polariton amplifier is presented. It is shown that this amplifier benefits from a low spontaneous emission into the amplified mode, which leads to an optical amplifier with low noise characteristics. The experimental setup and techniques are explained in detail.

Surface plasmon-polaritons are optical surface waves formed through the interaction of photons with free electrons at the surface of metals. They offer interesting applications in a broad range of scientific fields such as physics, chemistry, biology, and material science. However, many of such applications face limitations imposed by the high propagation losses of these waves at visible and near-infrared wavelengths, which result mainly from power dissipation in the metal. In principle, the propagation losses of surface plasmon-polaritons can be compensated through optical amplification. The objective of this thesis is to provide deeper insights on the physics of surface plasmon-polariton amplification and spontaneous emission in surface plasmon-polariton amplifiers through theoretical and experimental vehicles applied (but not necessarily restricted) to a particular plasmonic mode termed long-range surface plasmon-polariton. On the theoretical side, the objective is approached by developing a realistic theoretical model to describe the small-signal amplification of surface plasmon-polaritons in planar structures incorporating dipolar gain media such as organic dye molecules, rare-earth ions, and quantum dots. This model takes into account the inhomogeneous gain distribution formed near the metal surface due to a non-uniform excitation of dipoles and due to a position-dependent excited-state dipole lifetime that results from near-field interactions between the excited dipoles and the metal. Also, a theoretical model to describe the amplified spontaneous emission of surface plasmon-polaritons supported by planar metallic structures is developed. This model takes into account the different energy decay channels into which an exited dipole located in the vicinity of the metal can relax. The validity of this model is confirmed through experimentation. On the experimental side, the objective is approached by providing a direct experimental demonstration of complete loss compensation in a plasmonic waveguide. The experiments are conducted using the long-range surface plasmon-polariton supported by a symmetric thin gold waveguide incorporating optically pumped organic dye molecules in solution as the gain medium. Also, an experimental study of spontaneous emission in a long-range surface plasmon-polariton amplifier is presented. It is shown that this amplifier benefits from a low spontaneous emission into the amplified mode, which leads to an optical amplifier with low noise characteristics. The experimental setup and techniques are explained in detail.

The understanding of the biological processes at the cellular and subcellular level requires the ability to directly visualize them. Fluorescence microscopy played a key role in biomedical imaging because of its high sensitivity and specificity. However, traditional fluorescence microscopy has a limited resolution due to optical diffraction. In recent years, various approaches have been developed to overcome the diffraction limit. Among these techniques, nonlinear structured illumination microscopy (SIM) has been demonstrated a fast and full field superresolution imaging tool, such as Saturated-SIM and Photoswitching-SIM. In this dissertation, I report a new approach that applies nonlinear structured illumination by combining a uniform excitation field and a patterned stimulated emission depletion (STED) field. The nature of STED effect allows fast switching response, negligible stochastic noise during switching, low shot noise and theoretical unlimited resolution, which predicts STED-SIM to be a better nonlinear SIM. After the algorithm development and the feasibility study by simulation, the STED-SIM microscope was tested on fluorescent beads samples and achieved full field imaging over 1 x 10 micron square at the speed of 2s/frame with 4-fold improved resolution. Our STED-SIM technique has been applied on biological samples and superresolution images with tubulin of U2OS cells and granules of neuron cells have been obtained. In this dissertation, an effort to apply a field enhancement mechanism, surface plasmon resonance (SPR), to nonlinear STED-SIM has been made and around 8 time enhancement on STED quenching effect was achieved. Based on this enhancement on STED, 1D SPR enhanced STED-SIM was built and 50 nm resolution of fluorescence beads sample was achieved. Algorithm improvement is required to achieve full field superresolution imaging with SPR enhanced STED-SIM. The application of nonlinear structured illumination in two photon light-sheet microscopy is also studied in this dissertation. Fluorescent cellular imaging of deep internal organs is highly challenging because of the tissue scattering. By combining two photon Bessel beam light-sheet microscopy and nonlinear SIM, 3D live sample imaging at cellular resolution in depth beyond 200 microns has been achieved on live zebrafish. Two-color imaging of pronephric glomeruli and vasculature of zebrafish kidney, whose cellular structures located at the center of the fish body are revealed in high clarity.

This thesis describes the development of sensitive and high-resolution fluorescence spectroscopic and microscopic techniques and their application to probe biomolecules and their interactions in solution, lipid membrane model systems and in cells. Paper I-IV are largely focused on methodological developments. In paper I, a new fluorescence method based on fluorescence correlation spectroscopy (FCS) for detecting single particles was realized, requiring no fluorescent labeling of the particles. The method can yield information both about the diffusion properties of the particles as well as about their volumes. In paper II, a modified fluorescence cross correlation spectroscopy procedure with well characterized instrumental calibration was developed and applied to study cis interactions between an inhibitory receptor and its Major Histocompatibility Complex class I ligand molecule, both within the same cellular membranes. The quantitative analysis brought new insights into the Nature killer cell’s self-regulating of tolerance and aggressiveness for immune responses. Paper III describes a multi-color STED (STimulated Emission Depletion) microscopy procedure, capable of imaging four different targets in the same cells at 40nm optical resolution, which was developed and successfully demonstrated on platelets. In paper IV, a modified co-localization algorithm for fluorescence images analysis was proposed, which is essentially insensitive to resolutions and molecule densities. Further, the performance of this algorithm and of using STED microscopy for co-localization analysis was evaluated using both simulated and experimentally acquired images. Papers V-VII have their main emphasis on the application side. In paper V, transient state imaging was demonstrated on live cells to image intracellular oxygen concentration and successfully differentiated different breast cancer cell lines and the different metabolic pathways they adopted to under different culturing conditions. Paper VI describes a FCS-based study of proton exchange at biological membranes, the size-dependence of the membrane proton collecting antenna effect as well as effects of external buffer solutions on the proton exchange, in a nanodisc lipid membrane model system. These findings provide insights for understanding proton transport at and across membranes of live cells, which has a central biological relevance. In paper VII, STED imaging and co-localization analysis was applied to analyze cell adhesion related protein interactions, which are believed to have an important modulating role for the proliferation, differentiation, survival and motility of the cells. The outcome of efforts taken to develop means for early cancer diagnosis are also presented. It is based on single cells extracted by fine needle aspiration and the use of multi-parameter fluorescence detection and STED imaging to detect protein interactions in the clinical samples. Taken together, detailed studies at a molecular level are critical to understand complex systems such as living organisms. It is the hope that the methodologies developed and applied in this thesis can contribute not only to the development of fundamental science, but also that they can be of benefit to mankind in the field of biomedicine, especially with an ultimate goal of developing novel techniques for cancer diagnosis. / <p>QC 20140609</p>

Surface plasmon-polaritons are optical surface waves formed through the interaction of photons with free electrons at the surface of metals. They offer interesting applications in a broad range of scientific fields such as physics, chemistry, biology, and material science. However, many of such applications face limitations imposed by the high propagation losses of these waves at visible and near-infrared wavelengths, which result mainly from power dissipation in the metal. In principle, the propagation losses of surface plasmon-polaritons can be compensated through optical amplification. The objective of this thesis is to provide deeper insights on the physics of surface plasmon-polariton amplification and spontaneous emission in surface plasmon-polariton amplifiers through theoretical and experimental vehicles applied (but not necessarily restricted) to a particular plasmonic mode termed long-range surface plasmon-polariton. On the theoretical side, the objective is approached by developing a realistic theoretical model to describe the small-signal amplification of surface plasmon-polaritons in planar structures incorporating dipolar gain media such as organic dye molecules, rare-earth ions, and quantum dots. This model takes into account the inhomogeneous gain distribution formed near the metal surface due to a non-uniform excitation of dipoles and due to a position-dependent excited-state dipole lifetime that results from near-field interactions between the excited dipoles and the metal. Also, a theoretical model to describe the amplified spontaneous emission of surface plasmon-polaritons supported by planar metallic structures is developed. This model takes into account the different energy decay channels into which an exited dipole located in the vicinity of the metal can relax. The validity of this model is confirmed through experimentation. On the experimental side, the objective is approached by providing a direct experimental demonstration of complete loss compensation in a plasmonic waveguide. The experiments are conducted using the long-range surface plasmon-polariton supported by a symmetric thin gold waveguide incorporating optically pumped organic dye molecules in solution as the gain medium. Also, an experimental study of spontaneous emission in a long-range surface plasmon-polariton amplifier is presented. It is shown that this amplifier benefits from a low spontaneous emission into the amplified mode, which leads to an optical amplifier with low noise characteristics. The experimental setup and techniques are explained in detail.

Surface plasmon-polaritons are optical surface waves formed through the interaction of photons with free electrons at the surface of metals. They offer interesting applications in a broad range of scientific fields such as physics, chemistry, biology, and material science. However, many of such applications face limitations imposed by the high propagation losses of these waves at visible and near-infrared wavelengths, which result mainly from power dissipation in the metal. In principle, the propagation losses of surface plasmon-polaritons can be compensated through optical amplification. The objective of this thesis is to provide deeper insights on the physics of surface plasmon-polariton amplification and spontaneous emission in surface plasmon-polariton amplifiers through theoretical and experimental vehicles applied (but not necessarily restricted) to a particular plasmonic mode termed long-range surface plasmon-polariton. On the theoretical side, the objective is approached by developing a realistic theoretical model to describe the small-signal amplification of surface plasmon-polaritons in planar structures incorporating dipolar gain media such as organic dye molecules, rare-earth ions, and quantum dots. This model takes into account the inhomogeneous gain distribution formed near the metal surface due to a non-uniform excitation of dipoles and due to a position-dependent excited-state dipole lifetime that results from near-field interactions between the excited dipoles and the metal. Also, a theoretical model to describe the amplified spontaneous emission of surface plasmon-polaritons supported by planar metallic structures is developed. This model takes into account the different energy decay channels into which an exited dipole located in the vicinity of the metal can relax. The validity of this model is confirmed through experimentation. On the experimental side, the objective is approached by providing a direct experimental demonstration of complete loss compensation in a plasmonic waveguide. The experiments are conducted using the long-range surface plasmon-polariton supported by a symmetric thin gold waveguide incorporating optically pumped organic dye molecules in solution as the gain medium. Also, an experimental study of spontaneous emission in a long-range surface plasmon-polariton amplifier is presented. It is shown that this amplifier benefits from a low spontaneous emission into the amplified mode, which leads to an optical amplifier with low noise characteristics. The experimental setup and techniques are explained in detail.