1 |
[en] NUMERICAL AND EXPERIMENTAL INVESTIGATION OF THE MECHANICS OF ANEURYSMS IN ISOTROPIC RUBBER TUBES / [pt] INVESTIGAÇÕES NUMÉRICAS E EXPERIMENTAIS DA MECÂNICA DOS ANEURISMAS EM TUBOS ISOTRÓPICOS DE BORRACHALUCAS BOABAID IBRAHIM 26 January 2007 (has links)
[pt] Esta tese tem por objetivo investigar numérica e
experimentalmente a
mecânica da formação dos aneurismas na aorta. A parte
experimental foi realizada
no Laboratório de Membranas e Biomembranas utilizando-se
tubos cilíndricos de
látex sob pressão hidrostática e tubos de silicone com
geometria aproximada da
aorta. Foi investigada a pressão necessária à formação dos
aneurismas e o
comportamento do material ensaiado. A parte numérica foi
realizada por meio do
método dos elementos finitos através do programa ABAQUS.
Na análise
numérica foi validada a análise experimental e realizados
alguns estudos
paramétricos. / [en] The objective of this work was to investigate numerical
and experimentally
the mechanics of aortic aneurisms. The experimental part
was done in the
Laboratory of Membranes and Biomenbranes using latex
cylindrical tubes under
hydrostatic pressure and rubber tubes with the approximate
aortic geometry. The
required pressure to formation of aneurisms was
investigated as well the behavior
of the material during the experiments. The numerical part
was done with finite
element method with the ABAQUS program. In the numerical
analyses the
experimental analyses was validated and some parametric
studies was done.
|
2 |
[en] NUMERICAL AND EXPERIMENTAL ANALYSIS OF MECHANICS OF FORMATION OF ABDOMINAL AORTIC ANEURYSMS / [pt] ANÁLISE NUMÉRICA E EXPERIMENTAL DA MECÂNICA DE FORMAÇÃO DE ANEURISMAS DA AORTA ABDOMINALLUCAS BOABAID IBRAHIM 28 January 2011 (has links)
[pt] Esta tese tem por objetivo investigar numérica e experimentalmente a
mecânica da formação dos aneurismas na aorta abdominal. A parte experimental
foi realizada no Laboratório de Membranas e Biomembranas utilizando-se tubos
de silicone com a geometria aproximada da aorta sob pressão hidrostática. Foi
investigada a pressão necessária à formação dos aneurismas e o comportamento
do material ensaiado. A parte numérica foi realizada por meio do método dos
elementos finitos através do programa ABAQUS (6.8.1). Com a análise numérica
foi validada a análise experimental. Foram estudados casos de imperfeição
geométrica e física do material, usando equações constitutivas propostas para o
material da aorta. / [en] The aim of this work is to investigate numerically and experimentally
the mechanics of aortic aneurisms. The experimental part was performed at the
Laboratory of Membranes and Biomembranes using silicone tubes with the
geometry of the aorta under hydrostatic pressure. We investigate the behavior of
the material tested and the critical pressure, this is the pressure necessary for the
formation of aneurysms. The numerical analysis is done using the finite element
code ABAQUS (6.8.1), and is validated by the experimental analysis. Some
studies of geometrical and physical imperfections are performed, as well as the
ones with constitutive equations for the material of the aorta.
|
3 |
[pt] INVESTIGAÇÃO NUMÉRICA DA EVOLUÇÃO DOS PADRÕES DE FLUXO SANGUÍNEO DE DIFERENTES ANOS EM PACIENTES COM ANEURISMA DE AORTA ASCENDENTE / [en] NUMERICAL INVESTIGATION OF THE EVOLUTION OF BLOOD FLOW PATTERNS OF DIFFERENT YEARS IN PATIENTS WITH ASCENDING AORTIC ANEURYSMGABRIELA DE CASTRO ALMEIDA 29 April 2019 (has links)
[pt] Aneurisma arterial é definido como uma dilatação excessiva do diâmetro normal de uma artéria. O aneurisma da aorta ascendente é geralmente assintomático, portanto, é frequentemente identificado acidentalmente durante exames de imagem de rotina. Após a identificação do aneurisma, caso não haja indicação cirúrgica, o paciente deve ser acompanhado de maneira adequada, pois a ruptura arterial pode ser fatal. A influência do fluxo sanguíneo no remodelamento aórtico é uma importante área de investigação. O objetivo deste estudo é identificar padrões hemodinâmicos em aneurismas de aorta ascendente que possam estar relacionados com o aumento do aneurisma. Cada paciente do estudo foi avaliado em dois momentos distintos. Um modelo tridimensional do aneurisma de aorta ascendente foi gerado para cada paciente a partir de exames de angiotomografia de aorta. O padrão de fluxo foi determinado numericamente com a utilização de um software comercial. Foi demonstrado que o ângulo entre a entrada do fluxo principal e o tronco braquiocefálico pode induzir a uma incidência de um jato incidente na parede da aorta, ocasionado áreas de recirculação na região posterior do jato, além de altos valores de pressão e tensão cisalhante. Os presentes achados hemodinâmicos podem estar relacionados com o remodelamento da aorta ascendente. / [en] Arterial aneurysmal is defined as an excessive dilation of the normal diameter of an artery. Ascending aortic aneurysm is generally asymptomatic, so it is often accidentally identified during routine imaging examinations. After the aneurysm has been identified, if there is no surgical indication, the patient should be followed adequately, since arterial rupture can be fatal. The influence of blood flow on aortic remodeling is an important area of investigation. The aim of this study is to identify hemodynamic patterns in ascending aortic aneurysms that may be related to aneurysm enlargement. Each patient in the study was evaluated at two different times. A three-dimensional model of the ascending aortic aneurysm was generated for each patient from aortic angiotomography examinations. The flow field was numerically determined with a commercial software. It has been shown that the angle between the entrance of the main flow and the brachiocephalic trunk can induce an incident jet on the aortic wall, causing areas of recirculation in the posterior region of the jet, besides high values of pressure and wall shear stress. The present hemodynamics findings may be related to remodeling of the ascending aorta.
|
Page generated in 0.0285 seconds