Gold mine tailings material facilities are characterized by sparse vegetation and an abundance of dust. Mine tailings facilities are examples of extreme geotechnical and geochemical conditions which make it almost impossible for higher plants to establish and grow without rehabilitation intervention. In most cases higher plants such as grasses and trees are the focus areas for rehabilitation, but, having a look at something a little smaller such as biological crusts, it is seen that these micro-organisms play very important roles in any ecosystem. Various studies have shown that biological crusts, consisting of micro-organisms such as lichens, algae and cyanoprokaryotes enhance the soil quality by binding soil particles together, forming aggregates which counteract the erosive forces of wind and water. They play a part in nitrogen and carbon fixation, increase the soil surface temperature and increase the water retention of the soil. Thus, these organisms improve the overall health of the soil, which will in time encourage the successful establishment of higher plants. The aim of this study was to investigate the presence of cyanoprokaryotes and soil algae on mine tailings storage facilities that have been rehabilitated for different periods of time as well as to correlate the presence of these species with the physical and chemical characteristics of the mine tailings material. Chemical, physical and biological analyses of soil samples were done. Some of the ecologically important and dominant species were isolated and protocols were developed in order to identify the most successful manner in which to re-inoculate the organisms to a chosen substrate and how to measure biomass. Due to the immense cost of standard rehabilitation practices there is a need for a more cost effective, sustainable manner in which to protect the tailings material against the erosive forces of wind and water with as little input as possible. The influence of an organism cultured in normal Bold’s Basal medium (BBM) growth medium, BBM growth medium with half the phosphate concentration and BBM growth medium with half the nitrate concentration on the establishment of a biological soil crust (BSC) was tested. To test the influence of the inoculums already present in the tailings material and in the air, trials with mulch, water and nutrients without the addition of an organism was also investigated. This was done in the controlled environment of a glasshouse, as well as in field conditions. The biomass of the cyanoprokaryotes and algae, as well as the soil surface strength was also tested. The results show that the time of rehabilitation did not have an influence on the cyanoprokaryotes as well as algal species that occurred on the tailings material. Chlorella sp., Chlorococcum sp. and Klebsormidium sp. were present on all six sites, except on the fresh material and 15 year old material where no rehabilitation has been done. As for dominance; Chlamydomonas sp., Chlorococcum sp., Klebsormidium sp. and Phormidium sp. were dominant on all six sites except for the fresh material, where nothing grew. An array of methods exists for measuring algal biomass as a measure of growth. During the development of protocols for further use in investigating the growth of algae, the extraction solvent ethanol, for use in chlorophyll a extraction, was identified as the most sufficient. The re-inoculation of cyanoprokaryotes and soil algae onto a chosen substrate is most successful when pouring the organisms, cultured in growth medium and 0.1% agar, over the substrate. During the glasshouse trials the influence of the growth medium and growth medium with half the nitrate and half the phosphate concentrations showed that Chlamydomonas sp. produced the highest biomass when cultured in BBM. With Nostoc sp. the highest biomass occurred with culturing in BBM and BBM with half the phosphate concentration. Microcoleus vaginatus showed no significant difference when cultured in the three different growth mediums (BBM, BBM with half the nitrate concentration and BBM with half the phosphate concentration). Overall Nostoc sp. produced the highest biomass (34.33 μg/g), followed by Microcoleus vaginatus (17.05 μg/g) and Chlamydomonas sp. (6.12 μg/g). Soil surface strength, measured with a hand held penetrometer showed that Chlamydomonas sp. cultured in BBM growth medium produced the most stable crust (2.58 kg/cm2), although it had the lowest biomass measurements (6.12 μg/g). Nostoc sp. produced the highest biomass (34.44 μg/g), but had the lowest soil surface strength results (1.75 kg/cm2). Microcoleus vaginatus proved to be the species with high biomass production (17.05 μg/g), as well as high soil surface strength (2.08 kg/cm2). M. vaginatus is also a pioneer species and is therefore a good choice as primary inoculum on bare tailings material. It was decided to use Nostoc sp. in the field trials due to its high biomass and Microcoleus vaginatus due to the high soil surface strength produced. Despite the occurrence of a severe thunder storm on the afternoon of application and poor water management during the field trials the significance of water on the establishment of soil algae and cyanoprokaryotes on tailings material was determined. / MSc (Environmental Sciences), North-West University, Potchefstroom Campus, 2014

This study is focused on developing a method to predict the dynamic behavior of mine tailings dams under earthquake loading. Tailings dams are a by-product of coal mining and processing activities. Mine tailings impoundments are prone to instability and failure under seismic loading as a result of the mechanical behavior of the tailings. Due to the existence of potential seismic sources in close proximity to the coal mining regions in the United States, it is necessary to assess the post-earthquake stability of these tailings dams. To develop the aforementioned methodology, 34 cyclic triaxial tests along with vane shear tests were performed on undisturbed mine tailings specimens from two impoundments in Kentucky. Therefore, the liquefaction resistance and the residual shear strength of the specimens were measured. The laboratory cyclic strength curves for the coal mine specimens were produced, and the relationship between plasticity, density, cyclic stress ratio, and number of cycles to liquefaction were identified. The samples from the Big Branch impoundment were generally loose samples, while the Abner Fork specimens were dense samples, older and slightly cemented. The data suggest that the number of loading cycles required to initiate liquefaction in mine tailings, NL, decreases with increasing CSR and with decreasing density. This trend is similar to what is typically observed in soil. For a number of selected specimens, using the results of a series of small-strain cyclic triaxial tests, the shear modulus reduction curves and damping ratio plots were created. The data obtained from laboratory experiments were correlated to the previously recorded geotechnical field data from the two impoundments. The field parameters including the SPT blow counts (N1)60, corrected CPT cone tip resistance (qt), and shear wave velocity (vs), were correlated to the laboratory measured cyclic resistance ratio (CRR). The results indicate that in general, the higher the (N1)60 and the tip resistance (qt), the higher the CSR was. Ultimately, practitioners will be able to use these correlations along with common state-of-practice geotechnical field methods to predict cyclic resistance in fine tailings to assess the liquefaction potential and post-earthquake stability of the impoundment structures.

Platinum mining activities contribute substantially to South Africa's economy since it exceeded gold as economical contributor in 2001. Mining activities contribute to large amounts of waste production in the form of tailings and rock waste, deposited in the surrounding environment of the mine premises. Mining companies are held responsible for damages caused to the surrounding environment. These companies are required to introduce the cost of ecological rehabilitation in their operation costs as well as compile an environmental management plan. Numerous attempts to rehabilitate mine waste have proven unsuccessful. New and improved rehabilitation techniques are required to facilitate in the rehabilitation of these mine spoils. Woodchip-vermicompost produced from platinum mining wastes (woodchips and sewage sludge) was used as an alternative amendment to inorganic fertilisers during the rehabilitation of platinum mine tailings. The effectiveness of the woodchip-vermicompost as an alternative amendment during the platinum mine tailings rehabilitation were monitored using different ecosystem components. A natural veldt in the vicinity of the mine area was randomly selected to serve as a reference site. These ecosystem components selected have previously been shown to be effective as indicators of ecosystem quality. The components selected for this study includes the use of microbial enzymatic activity, microbial community structure, nematode trophic structures, and other mesofaunal groups such as micro-arthropods. The physical and chemical properties of the platinum mine tailings and reference area as well as the vegetation cover of the platinum mine tailings were determined. Statistical and multivariate analyses were use to determine the correlation between the dependent microbial components and dominate independent chemical properties. Nematode trophic structure, Maturity Index, and Plant-Parasitic nematode Index were used to compare the two rehabilitation techniques in terms of nematodes as indicators. Microarthropods family structures were used to compare the two amendments in terms of diversity and abundance. Enzymatic activity was positively affected by the addition of woodchip-vermicompost, than in the sites treated with inorganic fertilisers. The microbial community structure showed no statistically significant (p < 0.05) differences between the two amendments. A higher abundance of nematodes especially plant-parasitic nematodes and bacterivorous nematodes were observed in the woodchip-vermicompost sites than in the inorganic fertilised sites. According to the Maturity Index, both amendments became more enriched during the study period, while the Plant-Parasitic nematode Index showed that the carrying capacity for plantparasitic nematodes on the woodchip-vermicompost sites increased while it decreased in the inorganic fertilised sites, which can be related to the decrease in vegetation cover on the inorganic fertilised sites. Both coloniser (Prostigmata) and persister (Cryptostigmata and Mesostigmata) groups of the micro-arthropods, as well as a higher diversity of micro-arthropods, were present on the woodchip-vermicompost sites whereas the inorganic fertilised sites showed only the presence of colonisers, with a decrease in diversity and abundance of micro-arthropods over the study. The colonisation of micro-arthropods may have been affected by the addition of woodchip-vermicompost and vegetation cover, which contribute to the establishment of suitable microhabitats for these soil biota. By intercorrelating the results, it may be concluded that the addition of woodchip-vermicompost may be an essential part of the rehabilitation process, by contributing to soil organic material to the ecosystem system, which may improve the recolonisation of soil biota and ecosystem processes. However further studies need to be conducted in order to determine the long-term sustainability of the woodchip-vermicompost in providing organic material and sustaining the ecosystem processes. The study also showed the necessity to integrate various ecosystem components when evaluating ecosystem development due to the unique role each component plays and the impact it may have on other components. / Thesis (M. Environmental Science)--North-West University, Potchefstroom Campus, 2006.

Les polymères hydrosolubles sont utilisés dans diverses industries pour permettre la floculation, soit une séparation solide-liquide de particules présentes en suspension colloïdale. Afin de réduire les impacts environnementaux de l’exploitation des sables bitumineux en Alberta, l’industrie est à la recherche de nouveaux moyens et procédés pour traiter les résidus miniers permettant de séparer les matières solides et de récupérer l’eau. L’objectif des travaux présentés est d’améliorer la floculation, la densification et la déshydratation de ces résidus miniers aqueux par de nouveaux polymères synthétiques. Des homopolymères d’acrylamide de différentes masses molaires ont été synthétisés pour étudier l’influence de la masse molaire sur l’efficacité de floculation. Le taux initial de sédimentation (TIS) est le paramètre qui fut utilisé afin de comparer l’efficacité de floculation des différents polymères. Il a été possible de confirmer l’importance de la masse molaire sur l’efficacité de floculation et de déterminer une masse molaire minimale d’environ 6 MDa pour des polyacrylamides, afin d’obtenir l’efficacité de floculation maximale de suspensions colloïdales principalement composées de kaolin. Afin d’étudier l’effet des charges sur l’efficacité de floculation, des polymères anioniques et cationiques ont été synthétisés. Une série de copolymères d’acrylamide et d’acide acrylique ont été synthétisés comme polymères anioniques et deux séries de copolymères ont été synthétisés comme polymères cationiques, soit des copolymères d’acrylamide et de chlorure de diallyldiméthylammonium et des copolymères de 4-vinyl pyridine et de 1-méthyl-4-vinyl pyridinium. Il a été démontré que les charges anioniques des polymères avaient peu d’influence sur l’efficacité de floculation et que leur comportement en présence de sels était différent de ce que prévoyait la littérature. Il a aussi été démontré que les charges cationiques des polymères n’améliorent pas l’efficacité de floculation. Par la suite, des séries de copolymères amphiphiles, avec des monomères d’acrylamide, de N-alkylacrylamides et d’acrylonitrile, ont été synthétisés, pour étudier l’effet du caractère amphiphile sur la déshydratation des résidus miniers. Le pourcentage de déshydratation nette est le paramètre qui fut utilisé afin de comparer l’efficacité de déshydratation des différents polymères. Il a été possible de développer des copolymères amphiphiles qui améliorent l’efficacité de déshydratation par rapport à des homopolymères d’acrylamide. Il ne fut pas possible de déterminer une tendance entre la balance hydrophile/hydrophobe des copolymères amphiphiles et l’efficacité de déshydratation. / Water soluble polymers are extensively used in industry to achieve solid-liquid separations of particles in colloidal suspensions. In a way to reduce the environmental footprint of the mining exploitation, the oil sands industry is searching for new methods to treat tailings resulting from the extraction processes, by separating the solids and recycling the water. The objective of this work is to improve the flocculation and dewatering efficiency of the water-based tailings through the use of new synthetic polymers. Acrylamide homopolymers of different molecular weights were synthetized to study the effect of molecular weight on flocculation efficiency. Initial settling rate (ISR) was the parameter measured to characterize and compare the flocculation efficiencies. The important effect of polymer molecular weight on the flocculation efficiency was confirmed. The minimum molecular weight of polyacrylamide for optimal flocculation efficiency of kaolin colloidal suspensions has been determined to be around 6.8 MDa. To study the effect of charge on flocculation efficiency, anionic and cationic copolymers were synthetized. Copolymers of acrylamide and acrylic acid have been synthetized to study the effect of anionic charge, whereas copolymers of acrylamide and diallyldimethylammonium chloride and copolymers of 4-vinyl pyridine and 1-methyl-4-vinyl pyridinium have been synthetized to study the effect of cationic charge. Anionic copolymers have shown limited effect on the flocculation efficiency and their behaviour in salt solution was revealed to be different than expected from the literature. Cationic copolymers have shown no improvement in the flocculation efficiency. Amphiphilic copolymers were synthetized with acrylamide, N-alkylacrylamides and acrylonitrile monomers to study the effect of amphiphilicity on the dewatering efficiency of tailings. The net water release parameter was measured to compare the dewatering efficiency of the polymers. Amphiphilic copolymers that improve tailings’ dewatering, compared to polyacrylamide, were developed. Thus far, it was not possible to define a trend between hydrophilic/hydrophobic balance and dewatering efficiency of the copolymers.

Zonas de prospecção mineral são áreas reconhecidas por sua capacidade de alteração na qualidade ambiental. Os recentes casos de degradação de recursos hídricos por rejeitos de mineração nas cidades de Brumadinho (MG), Mariana (MG), Santo Antônio do Grama (MG) e na cidade de Barcarena (PA) apontam para a dificuldade na abordagem desse tema. A presença de espécies químicas potencialmente deletérias nos rejeitos de mineração pode impactar negativamente os ambientes aquáticos, impossibilitando o uso da água para consumo e levando a extinção da vida local. Nesse sentido, avaliações ambientais nos rejeitos de mineração, águas e sedimentos de sistemas hídricos próximos a áreas de garimpo apresentamse como ferramenta para a identificação de alterações nas bacias hidrográficas que os suportam. Embora estudos apontem a influência das atividades de mineração sobre a qualidade de sedimentos de sistemas hídricos, raras são as contribuições sobre os riscos associados à qualidade ambiental de sedimentos em zonas de extrações minerais de rochas semipreciosas. Assim, este estudo caracterizou a influência das atividades de extração mineral (ametista, quartzo, ágata, calcita e gipsita) sobre o potencial risco associado à qualidade dos sedimentos do Rio da Várzea, sul do Brasil, região mundial de maior extração de rochas ametistas. Parâmetros físicos e químicos (OD, pH, EH, CE, NTU, STD e T) da coluna de água foram quantificados in situ. Também foram avaliadas precipitações diárias e mensais no ano da coleta e a série histórica (1976 - 2017) na estação 2753015, a fluviometria das vazões médias mensais e diárias e da série histórica de vazões (2008-2017) na estação 74270000, dados do Sistema Nacional de Informação sobre Recursos Hídricos. As classes granulométricas de sedimentos foram investigadas para frações grosseiras (de 2000 até 75 &#956;m) e para frações finas (< 75 &#956;m), determinaram-se seus valores de umidade % (métodos gravimétricos). As concentrações de espécies químicas foram quantificadas por Espectrometria de Raios-X por dispersão de Comprimento de Onda (WDXRF); Espectrometria de Emissão de Raios-X por Energia Dispersiva (EDXRF); Espectrometria de Emissão Ótica por Plasma Indutivo Acoplado (ICP OES). Demonstrou-se, por meio de Estratégias Background e Índices de Qualidade Ambiental, a contaminação moderada dos sedimentos do Rio da Várzea - RS. Estabeleceu-se, por estratégias geoquímicas distintas, a construção da linha de base (Background) da Bacia Hidrográfica do Rio da Várzea - RS, por meio do uso de solos locais de áreas de preservação ambiental e, finalmente, mostrou-se a implicação negativa do não uso de referências locais na avaliação da qualidade dos sedimentos. / Mineral prospection zones are known for their ability to alter environmental quality. The most recent cases of degradation of water resources in the cities of Brumadinho (MG), Mariana (MG) Santo Antônio do Grama (MG) and Barcarena (PA) show that this is a difficult theme to approach. The presence of potentially deleterious chemical species in mining tailings may negatively impact aquatic environments, making it impossible to use the contaminated water for consumption and leading to the extinction of local life. In this sense, environmental assessments in the mining, water and sediment tailings of water systems close to the mining areas present themselves as a tool to identify changes in the river basins that support them. Although studies point to the influence of mining activities on the quality of sediments of water systems, there are few contributions on the risks associated with the environmental quality of sediments in zones of mineral extraction of semiprecious rocks. Thus, this study characterized the influence of mineral extraction activities (amethyst, quartz, agate, calcite and gypsum) on the potential risk associated with the sediment quality of Rio de Várzea, southern Brazil, the world\'s largest region of ametetic rock extraction. Physical and chemical parameters (OD, pH, EH, CE, NTU, STD and T) of the water column were quantified in situ. Daily and monthly precipitations were also evaluated in the year of collection and the historical series (1976 - 2017) at the station 2753015, the fluviometry of the monthly and daily flows, and the historical flow series (2008-2017) at station 74270000, data from the National System Information on Water Resources. Sediment grading classes were investigated for coarse fractions (from 2000 to 75 &#956;m) and for fine fractions (< 75 &#956;m), their moisture content (gravimetric methods) was determined. Chemical species concentrations were quantified by Wavelength Scattering Spectrometry (WDXRF), Dispersive Energy X-ray Emission Spectrometry (EDXRF); Optical Emission Spectrometry by Coupled Inductive Plasma (ICP OES). It was demonstrated, through Background strategies and Environmental Quality Indexes, the moderate contamination of the sediments of Rio de Várzea - RS. It was established, by distinct geochemical strategies, the construction of the baseline (Background) of the Várzea River Watershed - RS, through the use of local soils of environmental preservation areas and, finally, the negative implication of the non use of local references in the evaluation of sediment quality.

Entre os principais métodos construtivos de barragens de contenção de rejeitos de mineração, o método da linha de montante é sem dúvida o mais vulnerável à ocorrência de acidentes originados por forças de percolação da água pelo barramento. Em um sistema barragem-reservatório constituído de solos finos e de baixa coesão, como as barragens de contenção de rejeitos, as forças de percolação da água favorecem a instalação de processos erosivos internos de piping e liquefação, maiores responsáveis pelos acidentes já registrados. Para redução dos riscos de acidentes em barragens construídas pelo método da linha de montante, a avaliação do comportamento do nível dágua deve ser constante. Neste contexto, o trabalho apresenta um programa de instrumentação e monitoramento composto por medidas piezométricas, pluviométricas, de vazão, do nível dágua do reservatório e de deslocamento horizontal com marco topográfico, com vistas ao aumento do fator de segurança destas obras. A execução de um procedimento metodológico com base no programa de instrumentação e monitoramento acima citado, possibilita a avaliação do comportamento do nível dágua nestas barragens. Por fim, são descritos os aspectos relevantes para correlação dos dados da instrumentação com os valores-limite definidos para o projeto, critério este determinante para o sucesso de um programa de instrumentação. O procedimento metodológico apresentado se mostrou eficiente na obtenção de parâmetros indispensáveis a uma correta avaliação do comportamento do nível dágua e as condições estruturais do barramento. / Among the main building methods of tailings dams, the upstream method is undoubtedly the most vulnerable to the occurrence of the failure originated by the power of seepage groundwater through the embankment. In a reservoir-dam system having low cohesion slimes, such as tailings dams, the power of seepage groundwater benefits the installation of internal erosive processes of piping and liquefaction, the most responsible for the failure already registered. For reduction of failure risks in tailings dams built through upstream method, the assessment of water level behavior must be constant. In this context, the survey presents an instrumental and monitored program composed by piezometer, rainy, downstream outlet, reservoir level of water measures and benchmark providing the increase of safety in these works. The execution of a methodological procedure based on the instrumental and monitored program above mentioned makes possible the assessment of water level behavior in these dams. At last, the relevant aspects for correlation of instrumental data with the limit-values defined for the project are described, meaningful criterion for the success of an instrumental program. The methodological procedure showed efficiency for the obtain of indispensable patterns for a right level of water behavior assessment and structure embankment condictions.

A mineração é formada pelo conjunto de ações de lavra, concentração e transformação do minério para múltiplas finalidades. O resultado da explotação de diversos minérios, após seus beneficiamentos, é a produção de rejeitos, em quantidades variáveis. Características diversas como vazão e conteúdo de água na polpa, densidade, arredondamento, esfericidade e granulometria do material interferem e definem projetos e construção de barragens para contenção de rejeitos. Desta forma, o estudo e avaliação técnica dos rejeitos empregados na construção destas barragens e o seu comportamento são fundamentais para a divulgação e enriquecimento científico e prático, principalmente no que tange aos aspectos de segurança. Foram avaliadas as características do material depositado ao longo de praias de rejeitos de minério de ferro e fosfato, analisando-se a granulometria, densidade real dos grãos, análise de forma (arredondamento, esfericidade e relação de aspecto), e os ensaios de simulação hidráulica, estudando a variabilidade da granulometria e forma dos grãos. Verificou-se que a deposição hidráulica nas praias de rejeitos ocorre pelo efeito da granulometria e densidade, em lentes e/ou camadas com características semelhantes, condicionando variações verticais e horizontais, análoga a leques aluviais úmidos. Não foram observadas variações significativas na forma dos grãos ao longo da praia. Os ensaios de simulação revelam sedimentação em camadas planares a lenticulares, com a diminuição da granulometria à medida que se afasta do ponto de lançamento, mas alterada pelo efeito das paredes do tanque. Portanto, os comportamentos geológico-geotécnicos das praias em barragens de contenção de rejeitos, determinados por uma variabilidade deposicional, devem ser considerados na elaboração de planos de instrumentação mais eficientes em futuros projetos. / The mining is formed by ore extraction, concentration, and transformation for multiple purposes. The result of the exploitation of several ores is, after their treatment, the tailings production in variable quantities. Several characteristics as flow and content of water in the slurry, as well as density, roundness, sphericity, and grain size distribution of the sediments interfere and define projects and construction of tailings dams. Considering this, the study and technical evaluation of the tailings used are fundamental for scientifical and practical enhancement, mainly referring to security aspects. The material deposited along tailings beaches from iron and phosphate ores was investigated in grain size distribution, real density of the grains, grain shape analysis (roundness, sphericity, and aspect ratio). Also the hydraulic deposition (flumes) was analyzed according to the grain size distribution and shape analysis of sediments. In tailings beaches it was found that the sedimentation happens, due to grain size distribution and density in lenses and/or layers with similar characteristics but with vertical and horizontal variations, muck like humid alluvial fans. Significant variations were not observed in the grain shape analysis along the beaches. The flume tests revealed sedimentation in planar and lenses lamination, with decrease of the grain size distribution in a downstream direction, but modified by the effects of the flume walls. Therefore, the geological and geotechnical behaviors of the beaches in tailings dams, characterized by depositional variability, should be considered in future projects with more efficient instrumentation plan.

A presença de elevada carga nitrogenada em corpos hídricos pode causar sérios impactos ambientais como a eutrofização e a toxicidade do meio. Um dos processos que possibilitam a remoção de nitrogênio de efluentes é a adsorção, na qual o uso de adsorventes alternativos tem sido aplicado para o aproveitamento de resíduos e redução dos custos no processo. Dentro deste contexto, o processo de extração e beneficiamento do carvão fóssil na Região Sul do Brasil produz um rejeito (RB) com características que possibilitam sua aplicação na síntese de zeólitas, as quais podem ser utilizadas como adsorventes. Assim, o objetivo da presente tese foi avaliar a remoção do íon amônio de soluções aquosas por adsorção utilizando-se zeólitas naturais e sintetizadas a partir do rejeito RB. Em um primeiro momento, experimentos de adsorção foram conduzidos utilizando-se zeólita Na-clinoptilolita para conhecimento dos parâmetros termodinâmicos e da capacidade de regeneração do material. Posteriormente, a síntese de zeólitas utilizando rejeito RB foi realizada variando-se a fonte de alumínio, o emprego da agitação do meio durante a síntese e temperatura de calcinação do rejeito. A caracterização dos materiais foi feita através das técnicas de Difração de Raios X (DRX), Microscopia Eletrônica de Varredura acoplada a Espectroscopia por Dispersão em Energia (MEV-EDS), Potencial Zeta (PZ), Fluorescência de Raios X (FRX), Porosimetria de Nitrogênio (BET), Espectroscopia no Infravermelho por Transformada de Fourier (FTIR) e Capacidade de Troca Catiônica (CTC). Por fim, experimentos de adsorção de amônio foram feitos para o material que apresentou o maior conteúdo de íons sódio em sua composição. Quanto aos estudos com a Na-clinoptilolita, o estudo termodinâmico demostrou que a constante de equilíbrio (K0) da adsorção da zeólita estimada por diferentes métodos pode apresentar variação de até 105 de um método para outro. O estudo em questão também revelou que o método de Gaines e Thomas é o mais adequado para a estimativa dos parâmetros termodinâmicos. Nos testes de regeneração da zeólita utilizando-se solução NaCl de 0,5 a 3,0 M foram obtidos valores acima de 76% de regeneração para toda faixa de concentração avaliada, sem o reuso da solução de NaCl. Os testes feitos com o reuso da solução salina na etapa da dessorção permitiram concluir que é possível tratar até 160 mL de efluente utilizando-se somente 20 mL de solução NaCl 1,0 M, mantendo-se uma capacidade de adsorção equivalente a 80% da capacidade original da zeólita. Através da aplicação de diferentes condições de síntese utilizando o rejeito RB, foram obtidos sete diferentes materiais. O material que apresentou maior conteúdo de Na+ em sua composição foi obtido utilizando-se: pré-tratamento do rejeito com calcinação a 800 °C, síntese sem agitação do meio reacional e sem adição de fonte de alumínio. As análises do material indicaram formação de zeólitas dos tipos SOD e LTA. Quanto à adsorção de íons amônio, o mesmo apresentou capacidade de adsorção (qe) equivalente a 6,8 mg·g-1 (a 25ºC), que corresponde a 34 % do valor obtido para a Na-clinoptilolita, indicando que a síntese ainda necessita de melhoramentos para tornar o material mais competitivo frente à zeólita natural comercializada. / The presence of high nitrogen loading in water bodies can cause serious environmental impacts, such as eutrophication and toxicity of the medium. One of the process that enables nitrogen removal from effluents is adsorption, in which the use of alternative adsorbents have been applied in order to reuse wastes from other production processes and for lowering costs. Within this context, the coal mining and beneficiation in southern Brazil generates a waste with features that allow its application in zeolite synthesis. Thus, the objective of this thesis was to evaluate the removal of ammonium from aqueous solutions by adsorption using a natural zeolite and a zeolite synthesized from coal beneficiation tailings. Firstly, adsorption experiments were conducted using the natural zeolite Na-clinoptilolite in order to understand the thermodynamics and regeneration of process. Then, zeolite synthesis experiments using coal beneficiation tailings (RB) were conducted by varying the source of aluminum, stirring during crystallization step, and the calcination temperature applied to RB. The characterization of materials was made through the techniques of X-Ray Diffraction (XRD), Scanning Electron Microscopy coupled to Energy Dispersive Spectroscopy (SEM-EDS), Zeta Potential (ZP), X-rays Fluorescence (XRF), Porosimetry of Nitrogen (BET), Infrared Spectroscopy Fourier Transform (FTIR) and Cation Exchange Capacity (CEC). Finally, a test of ammonium adsorption was made with the material that had the highest content of Na+ in its composition. Regarding the studies with Na-clinoptilolite, the thermodynamic study showed that the equilibrium constant (K0) to adsorption process estimated through different approaches can present variation of up to 105 from one method to another. This study also revealed that the Gaines and Thomas method was the most adequate to the estimative of thermodynamic parameters. In the Na-clinoptilolite regeneration tests using NaCl solution from 0.5 to 3.0 M were obtained values above 76% regeneration to whole concentration range evaluated, without the reuse of NaCl solution. Tests made with the reuse of saline solution in the desorption step showed that it is possible to treat up to 160 mL of effluent using only 20 mL of NaCl solution, maintaining an adsorption capacity of 80 % of zeolite original capacity. By applying different synthesis conditions using the by-product of coal processing, seven different materials were obtained. The material with the highest content of Na+ was obtained using: calcination at 800°C as a thermal pretreatment applied to the waste, no stirring of the reaction during crystallization step and no additional aluminum source. The analysis of this material indicated formation of zeolites SOD and LTA. This same material was tested for the adsorption of ammonium, resulting in adsorption capacity (qe) of 6.8 m2·g-1, under the same conditions as the test with Na-clinoptilolite (at 25 ºC), which corresponds to 34 % of Na-clinoptilolite capacity, indicating that the synthesis still need some improvement in order to make the synthetic material competitive faced with the natural one.

Resíduos de mineração, dispostos em barragens de rejeito, são materiais de baixas densidades e resistências, em geral – muitas vezes, suscetíveis à liquefação. Desta forma, técnicas de melhoramento de solos, tais como o Deep Soil Mixing, surgem como possibilidade à estabilização destes materiais. Neste sentido, baseado nesta técnica, este trabalho visa avaliar o comportamento mecânico de resíduos de mineração de ouro estabilizados com cimento, comparativamente aos rejeitos no estado natural, analisando fatores de influência (quantidade de agente cimentante, umidade inicial das amostras e líquido empregado na moldagem). Para este propósito, ensaios de resistência à compressão simples, de compressão diametral, de ondas ultrassônicas e triaxiais não-drenados (CIU) foram empregados. Os resultados mostram que os resíduos de mineração, nas condições representativas de campo, apresentam baixas resistências e suscetibilidade à liquefação a baixas tensões confinantes. Por sua vez, os ensaios com resíduo estabilizado com cimento revelaram que: o aumento nas taxas de cimentação, a diminuição dos teores de umidade iniciais das amostras e uso de licor proveniente das barragens de rejeito nas moldagens, repercutiram, em geral, em aumentos nas resistências (qu e qt) e na rigidez inicial (G0) das misturas As análises de variância comprovaram que todos os fatores controláveis estudados foram significativos para as respostas avaliadas e demonstraram que a influência da dosagem de cimento foi muito mais pronunciada, em relação às outras variáveis. O comportamento tensão-deformação das misturas, sob condições não-drenadas, foi típico de materiais cimentados submetidos à baixas tensões confinantes – com geração de poro-pressões negativas devidas à tendência à dilatação. Ainda, ficou demonstrado que o índice porosidade/teor volumétrico de cimento (η/Civ) é adequado para a previsão do comportamento mecânico das misturas resíduo-cimento, considerando os parâmetros estudados – ampliando a possibilidade de aplicação deste índice. Foi observado, que existe uma proporcionalidade direta entre as resistências à tração e à compressão das misturas, que independe da relação η/Civ, sendo esta traduzida através de um valor escalar único (ξ = 0,17). / Mine tailings are materials of low in situ densities and strengths, in general – often susceptible to liquefaction. In view of this, soil improvement methods such as Deep Soil Mixing can be alternatives for the stabilization of these materials. In this sense, based on DSM techniques, this research aims to analyze the mechanical behaviour of cemented gold mine tailings, comparing to its natural condition, evaluating factors that influence the stabilization (cement content, initial water content and type of water for preparing specimens). For this purpose, unconfined compressive tests, splitting tensile tests, ultrasonic pulse velocity tests and undrained triaxial (CIU) tests were used. The results showed that remoulded mine tailings samples presented low strength and liquefaction susceptibility under low confining pressures. In its turn, the tests with cemented gold tailings revealed that: increasing the cement content, decreasing initial water content and using water from the tailings pond (liquor) in moulding provided strength (qu and qt) and initial stiffness (G0) gains on the mixtures of gold mine tailings-Portland cement. In this regard, the variance analysis statistically demonstrated that all the factors chosen on the experiment were significant to the parameters assessed It is also showed that the cement content influence was much more pronounced than other factors. Furthermore, the stress-strain behaviour of the blends is typical of cemented materials under low confining pressures and undrained conditions – with negative pore-pressures build-up. In addition, it is demonstrated that the porosity/cement index controls the mechanical performance of gold tailings-Portland cement blends, considering the whole range of densities and cement contents studied – what broadens the applicability of such index. Finally, it was found a single relationship between tensile (qt) and compressive strength (qu) equal to 0.17, being independent of the porosity/cement ratio.

A mineração altera as condições ambientais naturais. Uma alternativa estudada para a recuperação de áreas degradadas é o uso de lodo de esgoto (LE) gerado por estações de tratamento de esgoto (ETE). Desse modo, o presente trabalho avaliou o uso integrado de rejeito de mineração de basalto (RM) e resíduo de saneamento (lodo de esgoto) como substituto ao uso de solo de cobertura (SC) durante a recuperação ambiental de pedreiras. Um experimento ex situ foi montado no Centro de Tecnologia/UFRGS, conferindo-se a adição de LE ou SC a RM e comparado à utilização de SC por meio de análises de fertilidade de solos e plantio de gramínea (Avena strigosa) como variáveis respostas. Amostras de RM e de SC foram obtidas em pedreira de basalto em Novo Hamburgo-RS e o LE, em uma ETE no mesmo município. Inicialmente RM, SC e LE foram caracterizados em termos de teor de matéria orgânica (MO) para definição dos tratamentos. O LE foi caracterizado conforme CONAMA 375/2006. O delineamento experimental consistiu em 5 tratamentos (misturas) e 5 blocos: (A) RM (0,1% MO), (B) RM + LE (1,8% MO), (C) RM + SC (1,8% MO), (D) SC (3,2% MO) e (E) RM + LE (3,2% MO) Os tratamentos foram submetidos à caracterização química (pH, macro e micronutrientes) e granulometria. Paralelamente, semeou-se aveia preta (Avena strigosa) a qual foi coletada, seca e pesada durante a conclusão do ciclo vegetativo; a massa seca e o teor de nutrientes em tecido foliar foram comparados. Resultados mostram baixo teor de MO em RM (0,1%), diferentemente do SC (3,2%) e do LE (15,1%). O LE cumpre os parâmetros impostos pela legislação. A granulometria dos tratamentos A, B e E, foi caracterizada como arenosa e dos tratamentos C e D como média. As misturas com RM + LE com 1,8 e 3,2% de MO apresentaram níveis adequados de pH, micro e macronutrientes, o que refletiu na maior produção de matéria seca e teores de nutrientes no tecido foliar dos tratamentos B e E. Verificou-se que a mistura de LE e RM possui vantagens em termos de produção de matéria seca quando comparado ao SC, mostrando que o uso integrado de LE e de RM, na forma proposta, pode ser usado como material substituto ao uso de SC para recuperação de áreas degradadas, contribuindo ainda, na disposição final destes materiais. / Mining impacts natural environmental conditions. A widely studied alternative to address environmental restoration in degraded areas is the use of sewage sludge (LE), which is a byproduct of urban sewage treatment plant (ETE). In this context, the present study evaluated the integrated use of basalt quarry waste (RM) and sewage sludge (LE) as a substitute for natural soils (SC) during quarry environmental restoration. An ex situ experiment was installed at the Technology Center of UFRGS in which LE or SC where mixed to RM and compared to the use of SC through soil fertility analysis and grass growth (Avena strigosa) as dependent variables. RM and SC samples were collected at a basalt quarry in the city of Novo Hamburgo-RS, and LE at an ETE in the same city. Initially, RM, SC and LE were characterized in terms of organic matter content (MO) which was used for the definition of treatments. The LE was characterized according to CONAMA 375/2006. A completely randomized design experiment was used, including five treatments (mixtures) and five blocks: (A) RM (0.1% MO), (B) RM + LE (1.8% MO), (C) RM + SC (1.8% MO), (D) SC (3.2% MO) e (E) RM + LE (3,2% MO) Chemical (pH, macro and micronutrients) and particle size distribution characterization analysis were performed in all soil mixture treatments. In parallel, black oat (Avena strigosa) was sown in all treatments which was cut, dried and weight near to its vegetative cycle conclusion; dry mass production and nutrients in plant tissue were compared. Results showed low MO in RM (0.1%) differently from SC (3.2%) and LE (15.1%). LE is in accordance with CONAMA legislation. Texture of treatments A, B and E was characterized as coarse and in treatments C and D as medium. Mixtures containing RM + LE with 1.8% and 3.2% MO had adequate pH and micro and macronutrient content, what is supported by the highest dry mass production in the B and E treatments. It was verified that the addition of LE to the RM leads to better outcomes in terms of dry mass production when compared to SC. Results show that as proposed, the integrated use of LE and RM can be used as an alternative for SC use in environmental restoration, also contributing to these materials’ disposal.