Global ETD Search

1	Microstructures de précipitation et mécanismes de corrosion feuilletante dans les alliages d'aluminium de la série 7000 à très hautes caractéristiques mécaniques Marlaud, Thorsten 28 April 2008 (has links) (PDF) Les alliages d'aluminium de la série 7000 à hautes caractéristiques mécaniques, constitués principalement des éléments d'addition Zn, Mg, et Cu, sont notamment utilisés dans l'industrie aéronautique civile. Néanmoins, les traitements thermiques et/ou thermomécaniques appliqués pour maximiser les propriétés mécaniques de ces alliages, peuvent les sensibiliser à divers modes de corrosion structurale dont la corrosion feuilletante, dont les mécanismes sont encore mal compris. En outre, les nouvelles générations d'alliages, développées en vue d'augmenter les propriétés mécaniques, contiennent toujours plus d'éléments d'addition, ce qui est susceptible de modifier leur sensibilité à ce phénomène. <br />Ce travail s'attache à faire progresser la compréhension des mécanismes de corrosion feuilletante des alliages 7000, en cherchant à identifier le rôle des principaux éléments d'alliage. Pour cela nous avons caractérisé finement les états de précipitation d'un grand nombre de microstructures, comme la composition des précipités durcissants nanométriques et de la matrice, par ASAXS et 3DAP. En parallèle, nous avons développé de nouvelles techniques électrochimiques permettant de quantifier la sensibilité de ces mêmes microstructures à la corrosion feuilletante. <br />Les résultats de l'étude mettent en évidence l'existence de deux mécanismes de corrosion : endommagement par dissolution intergranulaire et par rupture intergranulaire, dont la prédominance dépend de la composition de l'alliage et du traitement thermique. Nous proposons une explication au comportement en corrosion des différentes microstructures, faisant intervenir la composition chimique des différentes entités microstructurales. Précipitation alliage Al-Zn-Mg-Cu Corrosion feuilletante fragilisation par hydrogène ASAXS 3DAP rupture intergranulaire microstructure de précipitation alliages 7000
2	Interrupted ageing of Al-Mg-Si-Cu alloys Buha, Joka, School of Materials Science & engineering, UNSW January 2005 (has links) This thesis systematically investigates the effects of a recently developed modified ageing procedure of aluminium alloys, termed the T6I6 temper, on the microstructural development and mechanical properties of the Al ??? Mg ??? Si - Cu alloy 6061. For the T6I6 temper, a conventional single stage T6 temper is interrupted by an ageing period at a reduced temperature (65??C) to facilitate secondary precipitation, before resuming the final ageing at the temperature of the initial T6 treatment. The T6I6 temper was found to cause simultaneous increases in tensile properties, hardness, and toughness as compared with 6061 T6. Al ??? Mg ??? Si ??? Cu alloys are medium strength alloys widely used in the automotive industry and their further improvement is underpinned by stringent demands for weight reduction placed on the transportation industry in recent years. The potential for further improvement of the mechanical properties was found in the control of secondary precipitation that may take place even in some fully aged alloys when exposed to reduced temperatures. The overall improvement in the mechanical properties of 6061 T6I6 was attributed to the formation of finer and more densely dispersed precipitates in the final microstructure. The refinement of precipitates was facilitated by control of the precipitation processes and gradual evolution of the microstructure throughout each stage of the T6I6 treatment. The results indicated that the concentration and the chemical environment of the vacancies controlled the precipitation processes in this alloy. Findings also show that the proportion of the different precipitate phases present in the final microstructure, as well as the amount of the solute in these precipitates, can be controlled and modified utilizing secondary precipitation. A number of analytical techniques were used in this study. The evolution of the microstructure was studied using Transmission Electron Microscopy (TEM), High Resolution TEM (HRTEM) and Three Dimensional Atom Probe (3DAP). Vacancy-solute interactions were studied using Positron Annihilation Lifetime Spectroscopy (PALS) and 3DAP. The distribution of the solute was studied using 3DAP and Nuclear Magnetic Resonance (NMR). Differential Scanning Calorimetry (DSC) was used to identify precipitation reactions and to determine the stability of vacancy-associated aggregates. aluminium alloys Al-Mg-Si-Cu alloys AA6061 precipitation hardeninig secondary precipitation interrupted ageing T6I6 nanostructural characterisation mechanical properties TEM 3DAP PALS NMR DSC
3	Interrupted ageing of Al-Mg-Si-Cu alloys Buha, Joka, School of Materials Science & engineering, UNSW January 2005 (has links) This thesis systematically investigates the effects of a recently developed modified ageing procedure of aluminium alloys, termed the T6I6 temper, on the microstructural development and mechanical properties of the Al ??? Mg ??? Si - Cu alloy 6061. For the T6I6 temper, a conventional single stage T6 temper is interrupted by an ageing period at a reduced temperature (65??C) to facilitate secondary precipitation, before resuming the final ageing at the temperature of the initial T6 treatment. The T6I6 temper was found to cause simultaneous increases in tensile properties, hardness, and toughness as compared with 6061 T6. Al ??? Mg ??? Si ??? Cu alloys are medium strength alloys widely used in the automotive industry and their further improvement is underpinned by stringent demands for weight reduction placed on the transportation industry in recent years. The potential for further improvement of the mechanical properties was found in the control of secondary precipitation that may take place even in some fully aged alloys when exposed to reduced temperatures. The overall improvement in the mechanical properties of 6061 T6I6 was attributed to the formation of finer and more densely dispersed precipitates in the final microstructure. The refinement of precipitates was facilitated by control of the precipitation processes and gradual evolution of the microstructure throughout each stage of the T6I6 treatment. The results indicated that the concentration and the chemical environment of the vacancies controlled the precipitation processes in this alloy. Findings also show that the proportion of the different precipitate phases present in the final microstructure, as well as the amount of the solute in these precipitates, can be controlled and modified utilizing secondary precipitation. A number of analytical techniques were used in this study. The evolution of the microstructure was studied using Transmission Electron Microscopy (TEM), High Resolution TEM (HRTEM) and Three Dimensional Atom Probe (3DAP). Vacancy-solute interactions were studied using Positron Annihilation Lifetime Spectroscopy (PALS) and 3DAP. The distribution of the solute was studied using 3DAP and Nuclear Magnetic Resonance (NMR). Differential Scanning Calorimetry (DSC) was used to identify precipitation reactions and to determine the stability of vacancy-associated aggregates. aluminium alloys Al-Mg-Si-Cu alloys AA6061 precipitation hardeninig secondary precipitation interrupted ageing T6I6 nanostructural characterisation mechanical properties TEM 3DAP PALS NMR DSC
4	Bestimmung von Platzbesetzung und Bindungsenergien mittels Atomsondentomographie / Site Occupation and Binding Energies by Means of Atom Probe Tomography Boll, Torben 07 May 2010 (has links) No description available. 530 Physik Mathematics and Computer Science Atomsonde Intermetallische Phase Platzbesetzung Bindungsenergie TiAl Cr Ag Nb Cu3Au DFT Spatial Distribution Maps AtomVicinity Simulation Atom Probe Tomography APT TAP 3DAP intermetallic TiAl Cr Nb Ag Cu3Au L10 L12 site occupation binding energy DFT Spatial Distribution Maps AtomVicinity Simulation 51.10 33.61

1

Page generated in 0.0234 seconds