This thesis provides investigation into the interaction between quartz lamp emitters and polyether ether ketone (PEEK) powder. Calculations and experiments concerning the conductivity and emissivity of the powder at various temperatures are performed. The thermal profile of the emitter on a flat powder bed is captured using thermal imaging. The effect of exposing a pile of powder to the emitter and the subsequent thermal gradient through the pile is measured and analyzed. Based on these results, ramifications for the application of these emitters to selective laser sintering (SLS) machines for processing high temperature polymers such as PEEK are discussed. / text

ABSTRACT Emerging 3D printing technologies bring with it the potential to transform everyday consumers into manufacturers of every product imaginable. However, this impending wave of newfound technological capability is bound to crash against our present conventional system of laws and regulations. In this paper, the strengths and weaknesses of our current intellectual property framework are examined, and its ability to tackle the future 3D printing market is assessed. Particular attention is paid to our modern formation of copyright and patent law, including an analysis of the Digital Millennium Copyright Act (DMCA), the Repair-Reconstruction Doctrine and other substantial legal protocol. The legal battle between the Napster file-sharing service and the larger music industry is also explored, as it provides key insight into similar intellectual property divergences that may soon drive a stake between 3D printing businesses and more traditional manufacturers of physical goods. Finally, this paper suggests modifications to be made towards traditional sales models, the Repair-Reconstruction Doctrine, the implementation of the DMCA protections, and our application of the Fair Use Doctrine.

No description available.

As cirurgias de reconstrução parcial ou total de orelha são um desafio na medicina, exigindo técnicas complexas e qualificadas, sendo as mais utilizadas àquelas que fazem uso de material autógeno (cartilagem da costela do próprio paciente). Trata-se de um processo artesanal em que o cirurgião deve esculpir manualmente a cartilagem para formar o modelo tridimensional da orelha, denominado framework, dessa forma, o resultado final depende, principalmente, da habilidade do cirurgião plástico. Tendo isso em vista, busca-se, neste trabalho, empregar as tecnologias computacionais utilizadas no Design Virtual para auxiliar o planejamento cirúrgico, utilizando digitalização tridimensional e fabricação digital para aprimorar o resultado da técnica de reconstrução auricular. A metodologia proposta sugere a digitalização tridimensional do paciente e, a partir disso, são projetados templates cirúrgicos para auxiliar a modelagem e o posicionamento do framework. A aplicação cirúrgica valida alguns pontos e possibilita o estudo de melhorias em determinados templates, utilizados então em outras duas reconstruções, obtendo-se resultados positivos. Assim, o uso do Design Virtual mostra-se confiável e útil na cirurgia de reconstrução auricular, levando à melhoria no planejamento e, assim, diminuição do tempo cirúrgico, sem riscos ou complicações ao paciente e com melhores resultados anatômicos. / The partial or total reconstruction of ear is a challenge in plastic surgery, requiring complex and skilled techniques. The most successful reconstructions use autogenous material (cartilage from the patient's own rib). It is a handmade process in which the surgeon must manually sculpt the cartilages to form the three-dimensional model of the ear, usually called as framework. Considering this, the final result depends mainly on the plastic surgeon's skill. In this scenario, the aim of this research is employ computer technologies used in Virtual Design to aid surgical planning, using three-dimensional scanning and digital manufacturing to improve the result of ear reconstruction technique. The proposed methodology suggests surgical templates, based on 3D patient scan, designed to assist the modeling and positioning of the framework. The surgical application validates some points and allows the study of improvements in certain templates, then used in other two surgeries, with positive results. Thus, the use of Virtual Design proves to be reliable and useful in ear reconstruction surgery, leading to improved planning and decreasing surgical time, without any risks or complications for the patient and with better anatomical results.

Biofilms are microbial communities developing at the interface between two phases, usually solidliquid, where the micro-organisms are nested in a self-secreted polymer matrix. The biofilm mode of growth is predominant in nature (for e.g. the slimy matter forming on rocks at river bottoms, the viscous deposit in water pipes or even dental plaque) and confers a suitable environment for the development of the micro-organisms. This is particularly the case for porous media which provide favourable substrates given their significant surface to volume ratio. The multi-physical framework of biofilms in porous media is highly complex where the mechanical, chemical and biological aspects interacting at different scales are poorly understood and very partially controlled. An example is the feedback mechanism between flow, spatial distribution of the micro-organisms and the transport of nutrient (by diffusion and advection). Biofilms developing in porous media are a key process of many engineering applications, for example biofilters, soil bio-remediation, CO2 storage and medical issues like infections. Progress in this domain is substantially hindered by the limitations of experimental techniques in metrology and imaging in opaques structures. The main objective of this thesis is to propose robust and reproducible experimental methodologies for the investigation of biofilms in porous media. An experimental workbench under controlled physical and biological conditions is proposed along with a validated 3D imaging protocol based on X-ray micro-tomography (XR MT) using a novel contrast agent (barium sulfate and agarose gel) to quantify the spatial distribution of the biofilm. At first, the XR MT-based methodology is compared to a commonly used techniques for biofilm observation: one or multiple photon excitation fluorescence microscopy, here two-photon laser scanning microscopy (TPLSM). This comparison is performed on Pseudomonas Aeruginosa biofilms grown in transparent glass capillaries which allows for the use of both imaging modalities. Then, the study of uncertainty associated to different metrics namely volume, 3D surface area and thickness, is achieved via an imaging phantom and three different segmentation algorithms. The quantitative analysis show that the protocol enables a visualisation of the biofilm with an uncertainty of approximately 17% which is comparable to TPLSM (14%). The reproducibility and robustness of the XR MT-based methodology is demonstrated. The last step of this work is the achievement of a novel bioreactor elaborated by additive manufacturing and controlled by a high-performance micro-fluidic system. The experimental workbench that we have designed enables to monitor in real-time the evolution of transport properties (effective permeability), O2 concentrations and biofilm detachment by spectrophotometry, all under controlled hydrodynamical conditions. Our methodology allows to investigate the influence of biophysical parameters on the colonisation of the porous medium, for example, the influence of flow rate or nutrient concentration on the temporal development of the biofilm. In conclusion, the thesis work proposes a robust and reproducible experimental methodology for the controlled growth and 3D imaging of biofilms in porous media; while providing versatility in the control of the substrate’s micro-architecture as well as on the flow and biochemical culture conditions. To our knowledge, the scientific approach followed, along with the experimental apparatus, form the most complete methodology, at this time, for the study of biofilms in porous media.

As cirurgias de reconstrução parcial ou total de orelha são um desafio na medicina, exigindo técnicas complexas e qualificadas, sendo as mais utilizadas àquelas que fazem uso de material autógeno (cartilagem da costela do próprio paciente). Trata-se de um processo artesanal em que o cirurgião deve esculpir manualmente a cartilagem para formar o modelo tridimensional da orelha, denominado framework, dessa forma, o resultado final depende, principalmente, da habilidade do cirurgião plástico. Tendo isso em vista, busca-se, neste trabalho, empregar as tecnologias computacionais utilizadas no Design Virtual para auxiliar o planejamento cirúrgico, utilizando digitalização tridimensional e fabricação digital para aprimorar o resultado da técnica de reconstrução auricular. A metodologia proposta sugere a digitalização tridimensional do paciente e, a partir disso, são projetados templates cirúrgicos para auxiliar a modelagem e o posicionamento do framework. A aplicação cirúrgica valida alguns pontos e possibilita o estudo de melhorias em determinados templates, utilizados então em outras duas reconstruções, obtendo-se resultados positivos. Assim, o uso do Design Virtual mostra-se confiável e útil na cirurgia de reconstrução auricular, levando à melhoria no planejamento e, assim, diminuição do tempo cirúrgico, sem riscos ou complicações ao paciente e com melhores resultados anatômicos. / The partial or total reconstruction of ear is a challenge in plastic surgery, requiring complex and skilled techniques. The most successful reconstructions use autogenous material (cartilage from the patient's own rib). It is a handmade process in which the surgeon must manually sculpt the cartilages to form the three-dimensional model of the ear, usually called as framework. Considering this, the final result depends mainly on the plastic surgeon's skill. In this scenario, the aim of this research is employ computer technologies used in Virtual Design to aid surgical planning, using three-dimensional scanning and digital manufacturing to improve the result of ear reconstruction technique. The proposed methodology suggests surgical templates, based on 3D patient scan, designed to assist the modeling and positioning of the framework. The surgical application validates some points and allows the study of improvements in certain templates, then used in other two surgeries, with positive results. Thus, the use of Virtual Design proves to be reliable and useful in ear reconstruction surgery, leading to improved planning and decreasing surgical time, without any risks or complications for the patient and with better anatomical results.

Master of Science / Department of Electrical and Computer Engineering / Punit Prakash / Microwave ablation is clinically used to thermally ablate cancerous tissue in the liver and other organs. When treating large tumor volumes, physicians may use multiple antennas simultaneously. Multiple antennas can ablate a larger tissue volume while using the same total power as a single antenna. Pre-clinical simulation and experimental studies most often presume parallel insertion of antennas. However, due to anatomical constraints, such as the presence of ribs and the diaphragm, it is often challenging to insert antennas in a parallel fashion in practice. Previous studies have attempted to analyze the effect of non-parallel antenna insertion on ablation outcome using computational and experimental approaches; however, they were limited because they did not account for dynamic temperature-dependent changes in tissue electrical properties in simulations and employed limited experimental validation. In this thesis, we have developed improved models of multiple-antenna microwave ablation, including accounting for the effects of temperature-dependent changes in tissue properties. We have also developed a system for experimental assessment of ablation zone profiles in ex vivo tissues. By utilizing 3D printing, we have constructed a device to precisely position antennas within experimental tissue samples and allows for accurate sectioning of the ablation zone relative to the plane of antenna insertion. Furthermore, we implemented image processing techniques for quantifying the size and shape of experimental ablation zones. This enables more accurate and repeatable comparisons of ablation profiles between simulations and experiments. We found that for an inter-antenna spacing in the range of 10 – 20 mm, simulations and experiments indicated that the ablation zone volumes may change by up to 30% due to non-parallel antenna insertion.

abstract: The advent of medical imaging has enabled significant advances in pre-procedural planning, allowing cardiovascular anatomy to be visualized noninvasively before a procedure. However, absolute scale and tactile information are not conveyed in traditional pre-procedural planning based on images alone. This information deficit fails to completely prepare clinicians for complex heart repair, where surgeons must consider the varied presentations of cardiac morphology and malformations. Three-dimensional (3D) visualization and 3D printing provide a mechanism to construct patient-specific, scale models of cardiovascular anatomy that surgeons and interventionalists can examine prior to a procedure. In addition, the same patient-specific models provide a valuable resource for educating future medical professionals. Instead of looking at idealized images on a computer screen or pages from medical textbooks, medical students can review a life-like model of patient anatomy. In cases where surgical repair is insufficient to return the heart to normal function, a patient may proceed to advanced heart failure, and a heart transplant may be required. Unfortunately, a finite number of available donor hearts are available. A mechanical circulatory support (MCS) device can be used to bridge the time between heart failure and reception of a donor heart. These MCS devices are typically constructed for the adult population. Accordingly, the size associated to the device is a limiting factor for small adults or pediatric patients who often have smaller thoracic measurements. While current eligibility criteria are based on correlative measurements, the aforementioned 3D visualization capabilities can be leveraged to accomplish patient-specific fit analysis. The main objectives of the work presented in this dissertation were 1) to develop and evaluate an optimized process for 3D printing cardiovascular anatomy for surgical planning and medical education and 2) to develop and evaluate computational tools to assess MCS device fit in specific patients. The evaluations for objectives 1 and 2 were completed with a collection of qualitative and quantitative validations. These validations include case studies to illustrate meaningful, qualitative results as well as quantitative results from surgical outcomes. The latter results present the first quantitative supporting evidence, beyond anecdotal case studies, regarding the efficacy of 3D printing for pre-procedural planning; this data is suitable as pilot data for clinical trials. The products of this work were used to plan 200 cardiovascular procedures (including 79 cardiothoracic surgeries at Phoenix Children's Hospital), via 3D printed heart models and assess MCS device fit in 29 patients across 6 countries. / Dissertation/Thesis / Doctoral Dissertation Bioengineering 2015

abstract: The microstructure development of Inconel alloy 718 (IN718) during conventional processing has been extensively studied and much has been discovered as to the mechanisms behind the exceptional creep resistance that the alloy exhibits. More recently with the development of large scale 3D printing of alloys such as IN718 a new dimension of complexity has emerged in the understanding of alloy microstructure development, hence, potential alloy development opportunity for IN718. This study is a broad stroke at discovering possible alternate microstructures developing in Direct-Metal-Laser-Sintering (DMLS) processed IN718 compared to those in conventional wrought IN718. The main inspiration for this study came from creep test results from several DMLS IN718 samples at Honeywell that showed a significant improvement in creep capabilities for DMLS718 compared to cast and wrought IN718 (Honeywell). From this data the steady-state creep rates were evaluated and fitted to current creep models in order to identify active creep mechanisms in conventional and DMLS IN718 and illuminate the potential factors responsible for the improved creep behavior in DMSL processed IN718. Because rapid heating and cooling can introduce high internal stress and impact microstructural development, such as gamma double prime formations (Oblak et al.), leading to differences in material behavior, DMLS and conventional IN718 materials are studied using SEM and TEM characterization to investigate sub-micron and/or nano-scale microstructural differences developed in the DMLS samples as a result of their complex thermal history and internal stress. The preliminary analysis presented in this body of work is an attempt to better understand the effect of DMLS processing in quest for development of optimization techniques for DMLS as a whole. A historical sketch of nickel alloys and the development of IN718 is given. A literature review detailing the microstructure of IN718 is presented. Creep data analysis and identification of active creep mechanisms are evaluated. High-resolution microstructural characterization of DMLS and wrought IN718 are discussed in detail throughout various chapters of this thesis. Finally, an initial effort in developing a processing model that would allow for parameter optimization is presented. / Dissertation/Thesis / Masters Thesis Engineering 2017

This document presents the development of a first proposal prototype of a rehabilitation exoskeleton hand. The idea was to create a lighter, less complex and cheaper exoskeleton than the existing models in the market but efficient enough to carry out rehabilitation therapies.The methodology implemented consists of an initial literature review followed by data collection resulting in a pre-design in two dimensions using two different software packages, MUMSA and WinmecC. First, MUMSA provides the parameters data of the movement of the hand to be done accurately. With these parameters, the mechanisms of each finger are designed using WinmecC. Once the errors were solved and the mechanism was achieved, the 3D model was designed.The final result is presented in two printed 3D models with different materials. The models perform a great accurate level on the motion replica of the fingers by using rotary servos. The properties of the model can change depending on the used material. ABS material gives a flexible prototype, and PLA material does not achieve it. The use of distinct methods to print has a high importance on the difficulties of development throughout the entire process of production. Despite found difficulties in the production, the model was printed successfully, obtaining a compact, strong, lightweight and eco-friendly with the environment prototype.