Essentially, the term aerogel describes a special geometric structure of matter. It is neither limited to any material nor to any synthesis procedure. Hence, the possible variety of materials and therefore the multitude of their applications are almost unbounded. Here we present a comprehensive picture of the most promising developments in the field during the last decades.

Essentially, the term aerogel describes a special geometric structure of matter. It is neither limited to any material nor to any synthesis procedure. Hence, the possible variety of materials and therefore the multitude of their applications are almost unbounded. Here we present a comprehensive picture of the most promising developments in the field during the last decades.

Gels and aerogels derived from colloidal nanoparticles not only own the advantages of the traditional aerogels like ultra- low density, large surface area and high porosity, but also retain some of the unique properties of the nanoparticles. These characteristics endow such new types of materials with the possibility of promising applications. In this review, we focus on the function-led design of aerogels from the 3D assembly of 0D spherical particles, 1D nanowires, and 2D nanosheets, and especially their applications in catalysis, sensing, optoelectronics, pollutants adsorbent/filtration, and beyond.

Nanostructured tin oxide materials with a high specific surface area and porosity are promising for applications such as electrocatalysis, lithium ion batteries or sensors. Here, we present a facile strategy for the synthesis of tin oxide aerogels using inexpensive hexahydroxostannate as tin precursor. This easy and scalable method yields tin oxide aerogels with a high specific surface area and wide pore size distribution. The method can be modified by adding hexahydroxoantimonate to obtain antimony doped tin oxide aerogels that show an electrical conductivity after annealing. A cogelation with other preformed nanoparticles (e.g. Au, Pt) leads to mixed gels. Both modifications do not have a large impact on the porous properties of the obtained aerogels. Tin oxide materials prepared via this route can be tailored to a specific application by versatile modification possibilities.

The underlying motivation for the work carried out for this thesis was the growing need for more sustainable technologies. The aim was to synthesize a “palette” of functional nanomaterials using the established technique of hydrothermal carbonization (HTC). The incredible diversity of HTC was demonstrated together with small but steady advances in how HTC can be manipulated to tailor material properties for specific applications. Two main strategies were used to modify the materials obtained by HTC of glucose, a model precursor representing biomass. The first approach was the introduction of heteroatoms, or “doping” of the carbon framework. Sulfur was for the first time introduced as a dopant in hydrothermal carbon. The synthesis of sulfur and sulfur/nitrogen doped microspheres was presented whereby it was shown that the binding state of sulfur could be influenced by varying the type of sulfur source. Pyrolysis may additionally be used to tune the heteroatom binding states which move to more stable motifs with increasing pyrolysis temperature. Importantly, the presence of aromatic binding states in the as synthesized hydrothermal carbon allows for higher heteroatom retention levels after pyrolysis and hence more efficient use of dopant sources. In this regard, HTC may be considered as an “intermediate” step in the formation of conductive heteroatom doped carbon. To assess the novel hydrothermal carbons in terms of their potential for electrochemical applications, materials with defined nano-architectures and high surface areas were synthesized via templated, as well as template-free routes. Sulfur and/or nitrogen doped carbon hollow spheres (CHS) were synthesized using a polystyrene hard templating approach and doped carbon aerogels (CA) were synthesized using either the albumin directed or borax-mediated hydrothermal carbonization of glucose. Electrochemical testing showed that S/N dual doped CHS and aerogels derived via the albumin approach exhibited superior catalytic performance compared to solely nitrogen or sulfur doped counterparts in the oxygen reduction reaction (ORR) relevant to fuel cells. Using the borax mediated aerogel formation, nitrogen content and surface area could be tuned and a carbon aerogel was engineered to maximize electrochemical performance. The obtained sample exhibited drastically improved current densities compared to a platinum catalyst (but lower onset potential), as well as excellent long term stability. In the second approach HTC was carried out at elevated temperatures (550 °C) and pressure (50 bar), corresponding to the superheated vapor regime (htHTC). It was demonstrated that the carbon materials obtained via htHTC are distinct from those obtained via ltHTC and subsequent pyrolysis at 550 °C. No difference in htHTC-derived material properties could be observed between pentoses and hexoses. The material obtained from a polysaccharide exhibited a slightly lower degree of carbonization but was otherwise similar to the monosaccharide derived samples. It was shown that in addition to thermally induced carbonization at 550 °C, the SHV environment exhibits a catalytic effect on the carbonization process. The resulting materials are chemically inert (i.e. they contain a negligible amount of reactive functional groups) and possess low surface area and electronic conductivity which distinguishes them from carbon obtained from pyrolysis. Compared to the materials presented in the previous chapters on chemical modifications of hydrothermal carbon, this makes them ill-suited candidates for electronic applications like lithium ion batteries or electrocatalysts. However, htHTC derived materials could be interesting for applications that require chemical inertness but do not require specific electronic properties. The final section of this thesis therefore revisited the latex hard templating approach to synthesize carbon hollow spheres using htHTC. However, by using htHTC it was possible to carry out template removal in situ because the second heating step at 550 °C was above the polystyrene latex decomposition temperature. Preliminary tests showed that the CHS could be dispersed in an aqueous polystyrene latex without monomer penetrating into the hollow sphere voids. This leaves the stagnant air inside the CHS intact which in turn is promising for their application in heat and sound insulating coatings. Overall the work carried out in this thesis represents a noteworthy development in demonstrating the great potential of sustainable carbon materials. / Das Ziel der vorgelegten Arbeit war es, mit Hilfe der Hydrothermalen Carbonisierung (HTC) eine Palette an verschiedenen Materialien herzustellen, deren physikalische und chemische Eigenschaften auf spezifische Anwendungen zugeschnitten werden können. Die Motivation hierfür stellt die Notwendigkeit, Alternativen zu Materialien zu finden, die auf fossilen Brennstoffen basieren. Dabei stellen vor allem nachhaltige Energien eine der größten Herausforderungen der Zukunft dar. HTC ist ein mildes, nachhaltiges Syntheseverfahren welches prinzipiell die Nutzung von biologischen Rohstoffen (z. B. landwirtschaftlichen Abfallprodukten) für die Herstellung von wertvollen, Kohlenstoff-basierten Materialien erlaubt. Es wurden zwei verschiedene Ansätze verwendet, um hydrothermalen Kohlenstoff zu modifizieren. Zum einen wurde HTC unter „normalen“ Bedingungen ausgeführt, d. h. bei 180 °C und einem Druck von etwa 10 bar. Der Zucker Glukose diente in allen Fällen als Kohlenstoff Vorläufer. Durch Zugabe von stickstoff und /oder schwefelhaltigen Additiven konnte dotierte Hydrothermalkohle hergestellt werden. Dotierte Kohlenstoffe sind bereits für ihre positiven Eigenschaften, wie verbesserte Leitfähigkeit oder erhöhte Stabilität, bekannt. Zusätzlich zu Stickstoff dotierter Hydrothermalkohle, die bereits von anderen Gruppen hergestellt werden konnte, wurde in dieser Arbeit zum ersten Mal Schwefel in Hydrothermalkohle eingebaut. Außerdem wurden verschiedene Ansätze verwendet, um Oberfläche und definierte Morphologie der dotierten Materialien zu erzeugen, welche wichtig für elektrochemische Anwendungen sind. Schwefel- und/oder stickstoffdotierte Kohlenstoff Nanohohlkugeln sowie Kohlenstoff Aerogele konnten hergestellt werden. Mit Hilfe von einem zusätzlichen Pyrolyseschritt (d. h. Erhitzen unter Schutzgas) konnte die Leitfähigkeit der Materialien hergestellt werden, die daraufhin als Nichtmetall-Katalysatoren für Wasserstoff-Brennstoffzellen getestet wurden. Im zweiten Ansatz wurde HTC unter extremen Bedingungen ausgeführt, d. h. bei 550 °C und einem Druck von ca. 50 bar, welches im Wasser Phasendiagram dem Bereich des Heißdampfes entspricht. Es konnte gezeigt werden, dass die so erhaltene Hydrothermalkohle ungewöhnliche Eigenschaften besitzt. So hat die Hochtemperatur-Hydrothermalkohle zwar einen hohen Kohlenstoffgehalt (mehr als 90 Massenprozent), enthält aber auch viele Wasserstoffatome und ist dadurch schlecht leitfähig. Da damit elektrochemische Anwendungen so gut wie ausgeschlossen sind, wurde die Hochtemperatur-Hydrothermalkohle für Anwendungen vorgesehen, welche chemische Stabilität aber keine Leitfähigkeit voraussetzen. So wurden beispielsweise Hochtemperatur-Kohlenstoff-Nanohohlkugeln synthetisiert, die großes Potential als schall- und wärmeisolierende Additive für Beschichtungen darstellen. Insgesamt konnten erfolgreich verschiedenste Materialien mit Hilfe von HTC hergestellt werden. Es ist zu erwarten, dass sie in Zukunft zu nachhaltigen Technologien und damit zu einem weiteren Schritt weg von fossilen Brennstoffen beitragen werden.

Zur Darstellung von Edelmetallnanopartikelüberstrukturen werden zunächst kolloidale Lösungen von Gold, Silber, Platin und Palladium synthetisiert. Dafür wird eine modifizierte Syntheseprozedur für Citrat stabilisierte Goldnanopartikel in wässriger Lösung unter Verwendung gleicher Konzentrationen auf die Systeme Silber, Platin und Palladium übertragen. Die Nanopartikellösungen werden mittels Absorptionsspektroskopie und Elektronenmikroskopie in mittlerer und hoher Auflösung charakterisiert. Die Platinnanopartikel werden verwendet, um mittels Keim vermitteltem Wachstum größere Platinnanopartikel darzustellen. Die resultierenden annähernd sphärischen Partikel haben eine sehr enge Größenverteilung mit einer Standardabweichung von drei bis sieben Prozent. Mit bis zu zwei Schritten des Keim vermittelten Wachstums können Partikel mit einem mittleren Durchmesser im Bereich von 10 bis 100 Nanometern hergestellt werden. Hochauflösende Elektronenmikroskopie zeigt, dass die Oberfläche der Partikel aus Platinkristalliten mit Durchmessern weniger Nanometer besteht, was zu einer Oberflächenrauhigkeit von drei bis zehn Nanometern führt. Mittels eines Kern-Schale-Modells werden Einzelteilchenextinktionsspektren berechnet, welche in sehr guter Übereinstimmung mit den experimentell bestimmten Extinktionsspektren des dispergierten Ensembles sind. Eine über weite Bereiche des sichtbaren Spektralbereichs lineare Abhängigkeit des Extinktionsmaximums vom Partikeldurchmesser wird beobachtet. Dadurch und zusammen mit der Einheitlichkeit der synthetisierten Platinsphären eröffnen sich Anwendungsmöglichkeiten im Bereich der Photonik, der Nanooptik und der oberflächenverstärkten Ramanspektroskopie. Geordnete Überstrukturen der Edelmetallnanopartikel können durch Infiltrieren von Templaten aus Block-Copolymer-Filmen mit wässriger Nanopartikellösung synthetisiert werden. In Abhängigkeit von der Vorbehandlung der Polymerfilme werden entweder zweidimensional periodische Anordnungen mit einer Periodizität von weniger als 30 Nanometern oder Fingerabdruck ähnliche Anordnungen mit einem Rillenabstand im selben Größenbereich hergestellt. Durch Entfernen des Polymers entstehen ein- bzw. zweidimensionale Anordnungen aus Platinnanodrähten bzw. -Nanopartikeln auf einem Siliziumwafer. Diese hochgeordneten Strukturen sind von fundamentalem Interesse für die Entwicklung von nanometerskaligen Schaltkreisen, Sensoren und als Substrate für die oberflächenverstärkte Ramanspektroskopie. Für die Herstellung ungeordneter Überstrukturen werden zwei unterschiedliche Ansätze gewählt: direkte Destabilisierung von Nanopartikellösungen, welche zu Hydrogelen und durch Trocknung zu Aerogelen führt, und Immobilisierung von Nanopartikeln auf einem in die Lösung implantierten Pilzmycel. Aus Gold-, Silber- und Platinnanopartikeln werden monometallische Hydro- und Aerogele synthetisiert. Unterschiedliche Destabilisierungsmittel sowie unterschiedliche Methoden zur Aufkonzentration der Nanopartikellösungen werden getestet. Abhängig von der Methode werden gelartige Überstrukturen mit teilweise komplexen Morphologien aus hierarchischen Anordnungen von Primär-, Sekundär-, Tertiärpartikeln beobachtet. Bimetallische Hydro- und Aerogele können aus Mischungen von Gold- oder Platin- mit Silbernanopartikellösungen hergestellt werden. Hochauflösende TEM-Aufnahmen zeigen ein polykristallines Netzwerk aus 2 bis 10 Nanometer dicken Drähten. Erste BET-Messungen zeigen, dass die Gold-Silber-Netzwerke eine Oberfläche von etwa 48 m2/g besitzen. Diese Systeme aus monometallischen und bimetallischen Nanopartikeln stellen erste Ansätze für hochporöse templatfreie Hydro- und Aerogele dar und besitzen großes Potential für den Einsatz in der heterogenen Gasphasenkatalyse, da fast die gesamte Oberfläche aus Übergangsmetall besteht. Es wird für eine Auswahl an unterschiedlichen Pilzen gezeigt, dass deren Wachstum direkt in den synthetisierten Nanopartikellösungen möglich ist. Ohne weitere Funktionalisierung findet eine Anlagerung von Nanopartikeln auf der Pilzoberfläche statt. Starke Variationen in den Affnitäten verschiedener Pilze zu den unterschiedlichen Metallnanopartikeln werden beobachtet. Auch werden Unterschiede der Nanopartikelaffnität mit Variation der Morphologie innerhalb desselben Hybridsystems beobachtet. Ein Platin-Pilz-Hybrid wird in wässriger Lösung erfolgreich als Katalysator einer Redoxreaktion getestet. Solche Hybridstrukturen besitzen ebenso wie die oben beschriebenen Aerogele großes Potential für den Einsatz in der heterogenen Katalyse, wobei die Verwendung von Pilzmycel als Trägermaterial eine kostengünstige Darstellung größerer Katalysatormengen ermöglichen könnte.

We report on an efficient assembly approach to a variety of electrostatically stabilized all-inorganic semiconductor nanocrystals (NCs) via their linking with appropriate ions into multibranched gel networks. These all-inorganic non-ordered 3D assemblies can combine strong interparticle coupling which facilitates charge transport between the NCs with their diverse morphology, composition, size, and functional capping ligands. Moreover, the resulting dry gels (aerogels) are highly porous monolithic structures, which preserve the quantum confinement of their building blocks. The inorganic semiconductor aerogel made of 4.5 nm CdSe colloidal NCs, capped with iodide ions and bridged with Cd2+ ions, exhibited a surface area as high as 146 m2/g.

Nanomaterials have attracted considerable attention during the past decades due to their unique and fascinating properties. However, this class of materials is not an invention of modern age. People have been using nanomaterials for centuries, although unwittingly. Probably the most famous example for the usage of nanomaterials in ancient times is the Lycurgus Cup, a Roman glass cage cup created in the 4th century which changes the colour of its glass from green to ruby depending on the illumination conditions. The foundation for the development of the field of nanotechnology was laid by the speech of Feynman “There is plenty of room at the bottom” in 1959, in which he spoke about the principles of miniaturisation as low as to the atomic level. Today, modern nanotechnology made it its business to purposefully develop and synthesise nanomaterials as well as to face their applications in various fields, such as microelectronics, catalysis or biomedicine. However, the term “nanomaterials” does not solely involve the nanoparticulate units itself, but also their arrangement into two- or three-dimensional structures. Thereby, the maintenance of the nanoscale properties is one of the main challenges. This task was focussed by this work implied the preparation and macroscale arrangement of fluorescent QDs while preserving their optical properties. The main achievement of this work was the development of a novel aerogel material with non-quenching PL behaviour by using silica coated QDs as nanoparticulate building units. In comparison to other monolithic silica-QD structures or aerogels from pure QDs, a defined and controllable distance between the fluorescent QDs is provided in these structures by the silica shell. The spacing was shown to efficiently disable energy transfers so that no spectral shifts, lifetime shortening or PL QY losses are observed during the colloid to gel transition. The silica shell, established by a standard reverse microemulsion approach, was found to exhibit a certain porosity, which was proven by gas adsorption measurements. Existing cavities in the micro- and mesoporous range were found to allow small species such as metal ions to pass through the shell and interact with the QD core causing a detectable change of the PL intensity, which makes these materials suitable for future sensing applications. The gel preparation was based on a metal ion assisted complexation approach, which requires tetrazole functionalisation of the nanoparticulate building units. A major development in this work that permitted this gelation approach for silica-QDs was the development of a novel tetrazole-silane ligand. TMSPAMTz was specifically designed to bind to the silica surface of silica-QDs in aqueous solution and was prepared by a covalent coupling of an alkyl chained silane with a 5-subsituted tetrazole ring. Network formation is subsequently achieved by the interconnection of negatively charged tetrazole rings with metal ions, which allows for a broad spectrum of aerogel materials from different NP species as well as their mixtures as long as tetrazole capping is provided. Considering this diversity and the disabling of energy transfers, straightforward colour tuning was demonstrated herein by mixing differently emitting silica-QD species which gives great prospects for lighting applications. Furthermore, the possibility of plasmon enhanced emission was presented for mixed Au NP/silica-QD gels. With respect to future sensing applications, thin porous films from silica-QDs gels were prepared, which showed a promising concentration dependant PL quenching for the model analyst hydrogen peroxide. However, the film reproducibility of the applied drop-cast coating method was insufficient. As a suggestion to this, a LbL method was presented, wherein a gel is subsequently grown with the metal ion assisted complexation approach. In addition to the tetrazole ligands on the NP surface, tetrazole-silane ligands were used in this approach to functionalise the glass substrate surface. By this, homogeneous gel films of distinct thickness can be grown while the use of organic polymers can be completely avoided. Besides the preparation of NP assemblies, standard Cd-based QD materials as well as Au NPs of different sizes and shape, recent progresses in the synthesis of InP-based QDs were presented in this work. A thorough investigation and understanding of the growth influencing parameters allowed for the establishment of preparation routes for In(Zn)P/GaP/ZnS core/shell/shell QDs with emission wavelengths tuneable within a large range from 500 to 650 nm, narrow peak widths of 45 to 70 nm and PL QYs up to 60%. Successful incorporation of these QDs into salt matrices was further demonstrated. The resulting composite materials are very photostable and suitable as colour conversion materials for solid state lighting, as was clearly pointed out by a self-prepared WLED that met the standard commercial LEDs.

Nanomaterials have attracted considerable attention during the past decades due to their unique and fascinating properties. However, this class of materials is not an invention of modern age. People have been using nanomaterials for centuries, although unwittingly. Probably the most famous example for the usage of nanomaterials in ancient times is the Lycurgus Cup, a Roman glass cage cup created in the 4th century which changes the colour of its glass from green to ruby depending on the illumination conditions. The foundation for the development of the field of nanotechnology was laid by the speech of Feynman “There is plenty of room at the bottom” in 1959, in which he spoke about the principles of miniaturisation as low as to the atomic level. Today, modern nanotechnology made it its business to purposefully develop and synthesise nanomaterials as well as to face their applications in various fields, such as microelectronics, catalysis or biomedicine. However, the term “nanomaterials” does not solely involve the nanoparticulate units itself, but also their arrangement into two- or three-dimensional structures. Thereby, the maintenance of the nanoscale properties is one of the main challenges. This task was focussed by this work implied the preparation and macroscale arrangement of fluorescent QDs while preserving their optical properties. The main achievement of this work was the development of a novel aerogel material with non-quenching PL behaviour by using silica coated QDs as nanoparticulate building units. In comparison to other monolithic silica-QD structures or aerogels from pure QDs, a defined and controllable distance between the fluorescent QDs is provided in these structures by the silica shell. The spacing was shown to efficiently disable energy transfers so that no spectral shifts, lifetime shortening or PL QY losses are observed during the colloid to gel transition. The silica shell, established by a standard reverse microemulsion approach, was found to exhibit a certain porosity, which was proven by gas adsorption measurements. Existing cavities in the micro- and mesoporous range were found to allow small species such as metal ions to pass through the shell and interact with the QD core causing a detectable change of the PL intensity, which makes these materials suitable for future sensing applications. The gel preparation was based on a metal ion assisted complexation approach, which requires tetrazole functionalisation of the nanoparticulate building units. A major development in this work that permitted this gelation approach for silica-QDs was the development of a novel tetrazole-silane ligand. TMSPAMTz was specifically designed to bind to the silica surface of silica-QDs in aqueous solution and was prepared by a covalent coupling of an alkyl chained silane with a 5-subsituted tetrazole ring. Network formation is subsequently achieved by the interconnection of negatively charged tetrazole rings with metal ions, which allows for a broad spectrum of aerogel materials from different NP species as well as their mixtures as long as tetrazole capping is provided. Considering this diversity and the disabling of energy transfers, straightforward colour tuning was demonstrated herein by mixing differently emitting silica-QD species which gives great prospects for lighting applications. Furthermore, the possibility of plasmon enhanced emission was presented for mixed Au NP/silica-QD gels. With respect to future sensing applications, thin porous films from silica-QDs gels were prepared, which showed a promising concentration dependant PL quenching for the model analyst hydrogen peroxide. However, the film reproducibility of the applied drop-cast coating method was insufficient. As a suggestion to this, a LbL method was presented, wherein a gel is subsequently grown with the metal ion assisted complexation approach. In addition to the tetrazole ligands on the NP surface, tetrazole-silane ligands were used in this approach to functionalise the glass substrate surface. By this, homogeneous gel films of distinct thickness can be grown while the use of organic polymers can be completely avoided. Besides the preparation of NP assemblies, standard Cd-based QD materials as well as Au NPs of different sizes and shape, recent progresses in the synthesis of InP-based QDs were presented in this work. A thorough investigation and understanding of the growth influencing parameters allowed for the establishment of preparation routes for In(Zn)P/GaP/ZnS core/shell/shell QDs with emission wavelengths tuneable within a large range from 500 to 650 nm, narrow peak widths of 45 to 70 nm and PL QYs up to 60%. Successful incorporation of these QDs into salt matrices was further demonstrated. The resulting composite materials are very photostable and suitable as colour conversion materials for solid state lighting, as was clearly pointed out by a self-prepared WLED that met the standard commercial LEDs.

The formation of self-assembled monolayers on surfaces is often likely to be accompanied by the formation of byproducts, whose identification holds clues to the reaction mechanism but is difficult due to the minute amounts produced. We now report a successful identification of self-assembly byproducts using gold aerogel with a large specific surface area, a procedure likely to be applicable generally. Like a thin gold layer on a flat substrate, the aerogel surface is alkylated with n-butyl-d9 groups upon treatment with a solution of tetra-n-butylstannane-d36 under ambient conditions. The reaction byproducts accumulate in the mother liquor in amounts sufficient for GC-MS analysis. In chloroform solvent, they are butene-d8, butane-d10, octane-d18, and tributylchlorostannane-d27. In hexane, they are the same except that tributylchlorostannane-d27 is replaced with hexabutyldistannane-d54. The results are compatible with an initial homolytic dissociation of a C-Sn bond on the gold surface, followed by known radical processes.