Spelling suggestions: "subject:"amperometry."" "subject:"amperommetry.""
71 |
Spatial and temporal aspects of PI(4,5)P<sub>2</sub> and SNAREs in exocytosis studied using isolated membrane sheets and capacitance measurements / Spatial and temporal aspects of PI(4,5)P<sub>2</sub> and SNAREs in exocytosis studied using isolated membrane sheets and capacitance measurementsMilosevic, Ira 18 January 2006 (has links)
No description available.
|
72 |
Determina??o da teofilina, clindamicina, varfarina e verapamil por amperometria pulsada em sistema de an?lise por inje??o em batelada usando o eletrodo de diamante dopado com boroAndrade, Glauber Ant?nio dos Reis 24 March 2016 (has links)
?rea de concentra??o: Qu?mica anal?tica. / Submitted by Jos? Henrique Henrique (jose.neves@ufvjm.edu.br) on 2016-12-21T13:02:41Z
No. of bitstreams: 2
license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5)
glauber_antonio_reis_andrade.pdf: 2400963 bytes, checksum: 99ec593844d6ba3a1107158d86656739 (MD5) / Approved for entry into archive by Rodrigo Martins Cruz (rodrigo.cruz@ufvjm.edu.br) on 2017-01-21T11:09:00Z (GMT) No. of bitstreams: 2
license_rdf: 9 bytes, checksum: 42dd12a06de379d3ffa39b67dc9c7aff (MD5)
glauber_antonio_reis_andrade.pdf: 2400963 bytes, checksum: 99ec593844d6ba3a1107158d86656739 (MD5) / Made available in DSpace on 2017-01-21T11:09:00Z (GMT). No. of bitstreams: 2
license_rdf: 9 bytes, checksum: 42dd12a06de379d3ffa39b67dc9c7aff (MD5)
glauber_antonio_reis_andrade.pdf: 2400963 bytes, checksum: 99ec593844d6ba3a1107158d86656739 (MD5)
Previous issue date: 2016 / A Teofilina (TF), Clindamicina (CM), Varfarina (VF) e Verapamil (VP) s?o f?rmacos de baixo ?ndice terap?utico que necessitam de um controle de qualidade rigoroso na elabora??o de suas formula??es. O desenvolvimento de m?todos mais simples e r?pidos para doseamento desses medicamentos ? de grande interesse no setor farmac?utico. Neste sentido, o presente trabalho apresenta uma nova metodologia para determina??o desses f?rmacos por amperometria de m?ltiplos pulsos (MPA) acoplada ao sistema de an?lise por inje??o em batelada (BIA), utilizando o eletrodo de Diamante dopado com Boro (DDB). A an?lise em BIA foi realizada em uma c?lula eletroqu?mica do tipo Wall Jet, onde as inje??es foram realizadas por meio de uma micropipeta autom?tica ou, manualmente, por uma seringa descart?vel para TF, CM e VF, mostrando a possibilidade de diminuir custo do sistema de an?lise. O comportamento eletroqu?mico da TF, CM, VF e VP foi investigado por voltametria c?clica e os eletr?litos suportes escolhidos foram o ?cido sulf?rico 0,1 mol L-1, tamp?o fosfato 0,1 mol L-1 (pH 7,0), tamp?o fosfato 0,1 mol L-1 (pH 7,0) com 10% de ?lcool et?lico e ?cido sulf?rico 0,2 mol L-1, respectivamente. Nesses eletr?litos tr?s f?rmacos apresentaram um ?nico processo de oxida??o: a TF em +1,33V, a CM em +1,18 V e a VF em +0,90 V. J? o VP apresentou tr?s processos de oxida??o entre +1,2V e +1,5V, al?m de um processo de redu??o em +0,2V depende das oxida??es. A detec??o MPA-BIA foi baseada na aplica??o de um pulso de potencial de detec??o e outro de limpeza do DDB para tr?s f?rmacos. Neste caso, os pulsos de potencial para detec??o da TF, CM e VF foram todos aplicados por 100ms em +1,5V, +1,6V e +1,2V, respectivamente. Para determina??o do VP foram utilizados tr?s pulsos de potencial, um para oxida??o do VP (gerador) em +1,6V/50ms, um para redu??o do produto gerado (coletor) e quantifica??o do VP em -0,1V/30ms, e um terceiro em +1,1V/100ms para limpeza da superf?cie do DDB. A velocidade de inje??o da MA foi otimizada em 100?L s-1, exceto para VP que foi de 47?Ls-1, e com a SD a velocidade de inje??o foi de aproximadamente 107 ?Ls-1 pra a TF, CM e VF, proporcionando uma frequ?ncia anal?tica te?rica de pelo menos 53 determina??es por hora desses f?rmacos. Um baixo desvio padr?o relativo (10 medidas) foi obtido para todos os f?rmacos, n?o ultrapassando 3,0% tanto pela inje??o autom?tica quanto pela manual. As curvas anal?ticas foram estabelecidas e uma boa faixa linear foi obtida para todos os f?rmacos com pelo menos duas ordens de concentra??o. Os coeficientes de correla??o linear para todas as regress?es foram maiores que 0,992 em todos os estudos. Os estudos de adi??o e recupera??o mostraram valores pr?ximos a 100 % para todas as amostras farmac?uticas analisadas. O m?todo proposto usando a inje??o autom?tica e manual foi devidamente validado pelo m?todo oficial para cada um dos f?rmacos avaliados. Portanto, a detec??o MPA-BIA usando o eletrodo de DDB mostrou ser uma alternativa mais simples e r?pida para determina??o da TF, CM, VF e VP em formula??es farmac?uticas, possibilitando ainda uma diminui??o do custo do sistema BIA pela substitui??o da micropipeta autom?tica por uma seringa descart?vel. / Disserta??o (Mestrado) ? Programa de P?s-Gradua??o em Qu?mica, Universidade Federal dos Vales do Jequitinhonha e Mucuri, 2016. / Theophylline (TF), Clindamycin (CM), Warfarin (VF) and Verapamil (VP) are drugs of narrow therapeutic index that require a strict quality control in the preparation of their formulations. Thus, the development of simple and rapid methods for determination of these drugs is very important in the pharmaceutical industry. In this sense, this paper presents a new methodology for determination of these drugs by multiple-pulse amperometry (MPA) coupled to batch injection analysis (BIA), using the boron-doped diamond (BDD) electrode. The analysis in BIA system was performed in an electrochemical cell (Wall Jet), where the injections were performed by automatic micropipette or manually by an disposable syringe for TF, CM and VF, showing a possibility to reduction of the analysis cost. The electrochemical behavior of the analytes was investigated by cyclic voltammetry and the support electrolytes were chosen for TF, CM, VF and VP in medium of sulfuric acid 0.1 mol L-1, phosphate buffer 0.1 mol L-1 (pH 7.0), phosphate buffer 0.1 mol L-1 (pH 7.0) with 10% ethyl alcohol and sulfuric acid 0.2 mol L-1, respectively. In these conditions, three drugs exhibited a single oxidation process: TF in +1.33V, the CM in +1.18V and the VF in +0.90V (vs Ag/AgCl). Already the VP presented three oxidation processes between +1.2V and +1.5V, besides a reduction process in +0.20 V that depends on the oxidation. The MPA-BIA detection for three drugs (TF, CM, VF) was based on the application of two potential pulses, one for detection and other for cleaning BDD electrode. In this case, the potential pulses to detection the TF, CM and VF were all applied for 100ms at +1.5V, +1.2V and +1.6 V, respectively. In determination of the VP, were used three potential pulses, one for oxidation of VP (generator potential pulse) in +1.6V/50ms, one for reducing the generated product (collector potential pulse) and performed quantification of VP in -0.1V/30ms, and a third potential pulse at +1.1V/100ms for cleaning BDD electrode. The injection speed using automatic micropipette was 100?L s-1, except for VP that was 47?Ls-1, and injection speed by insulin syringe was approximately 107?Ls-1, which provide theoretical analytical frequency of at least 53 determinations per hour of these drugs. A low standard relative deviation (10 measures) was obtained for all drugs, not extending beyond 3.0% by both injections systems. The analytical curves were established and a good linear range was obtained for all drugs with at least two orders of concentration. The linear correlation coefficients for all regressions were higher than 0.992. The addition and recovery studies show values close to 100% for all drug samples analyzed. The proposed method using automatic and manual injection was validated by official method for each analyte. Therefore, this paper presented a fast and simple method for the determination of TF, CM, VF and VP in pharmaceutical formulations using BIA-MPA detection with BBD electrode. Moreover, this work demonstrated an inexpensive method for application in routine analysis of narrow therapeutic index drugs, mainly using a manual injection in BIA system by an disposable syringe.
|
73 |
Développement d'électrodes sélectives pour l'analyse de composés d'intérêt pharmaceutique: antipaludéens et halogénuresKimbeni Malongo, Trésor 25 June 2008 (has links)
RESUME<p><p>Le travail de thèse porte sur le développement d’électrodes sélectives originales et performantes pour l’analyse de composés d’intérêt pharmaceutique. <p><p> La partie introductive traite des notions relatives à l’électrochimie mais également de notions sur les molécules médicamenteuses étudiées, en l’occurrence les principes antipaludéens et l’iode.<p><p> La partie expérimentale se subdivise en deux parties distinctes selon le type d’électrodes sélectives auxquelles font appel les techniques électrochimiques.<p><p> La première partie concerne l’élaboration, la caractérisation et l’application des électrodes potentiométriques à membrane polymérique incluant une paire d’ions et sélectives à diverses molécules organiques pharmacologiquement actives (antipaludéens). Leur application aussi bien en analyse pharmaceutique qu’en cinétique de dissolution est décrite.<p><p> La deuxième partie est consacrée à l’élaboration d’un type de senseur ampérométrique original à pâte de carbone à base d’argent micronisé ou colloïdal et à la comparaison de ses performances avec l’électrode d’argent métallique. L’intérêt analytique est mis en évidence par la détermination quantitative des iodures.<p><p> Les différents aspects susceptibles d’influencer leur comportement, dont la nature des agents précipitants (tétraphénylborate de sodium et le tétrakis (4-chlorophényl) borate de potassium) et de plastifiants ont été investigués.<p>Les bonnes performances des ces électrodes en analyse quantitative ont permis d’explorer les possibilités de leur utilisation à l’étude de la cinétique de dissolution.<p><p> L’ampérométrie à électrode à pâte de carbone modifiée à base d’argent à l’échelle micronisée (35% m/m) couplée à la chromatographie liquide ionique s’est avérée très sensible vis-à-vis des iodures en particulier et des halogénures en général. Les facteurs susceptibles d’influencer les grandeurs de séparation et la réponse de l’électrode ont été investigués et l’exploitation du signal ampérométrique permet le dosage sélectif et rapide de faibles concentrations en iodures. Les informations fournies par les mesures réalisées en voltampérométrie cyclique à l’aide des mêmes électrodes permettent une bonne compréhension mécanistique quant au mode de détection ampérométrique évitant ainsi toute confusion à ce sujet et permettant l’optimisation du processus de détection.<p>------------------------------------------------<p>ABSTRACT<p><p>This thesis describes the development of original and high performance selective electrodes for the analysis of several pharmaceutical compounds. <p><p>The introduction describes the pharmaceutical compounds of interest (antimalarial drugs and iodine) and provides an overall understanding of the electrochemical groundwork pertaining to their analysis.<p><p>The experimental aspect of the thesis is divided into two parts, each according to the type of electrode and electrochemical technique used for the analysis.<p>The first part describes the design, characterization, and application of polymer membrane based ion selective potentiometric electrodes. Selectivity was provided by including ion pairs of several antimalarial drugs into the membrane. The feasibility of use of these electrodes in pharmaceutical analysis as well as in dissolution trials is also described in this part.<p><p>The second part describes the design of an original silver-modified carbon paste amperometric sensor and compares its performances to those of a plain metallic silver electrode. The electrode has been modified by silver microparticles or by silver nanoparticles. Quantitative iodine determination serves to prove the usefulness of this new sensor in analytical chemistry.<p><p>Different aspects, such as the nature of the counter ions (sodium tetraphenylborate and potassium tetrakis (4-chlorophenyl) borate) and the plastifying agents that are likely to influence electrode behaviour have been investigated. <p><p>Since the electrodes have been shown to perform well in quantitative analysis, the possibility of use in dissolution trials was explored.<p><p>Micronized silver-modified carbon paste electrode (35% Ag m/m) coupled to anionic-exchange liquid chromatography with amperometric detection was shown to be very sensitive with regards to the assay of halogenides in general and iodide in particular. After having investigated the various factors likely to influence chromatographic separation and electrode response, it was shown that the sensor could be used to rapidly and selectively determine low iodide concentrations in complex samples. Cyclic voltammetric analysis provided information concerning the mechanisms allowing amperometric detection, thus allowing an optimisation of the detection procedures.<p> / Doctorat en Sciences biomédicales et pharmaceutiques / info:eu-repo/semantics/nonPublished
|
74 |
Využití potenciálových programů při průtokovém elektrochemickém stanovení biologicky aktivních organických látek / Utilization of potential programs in flow electrochemical determination of biologically active organic compoundsBavol, Dmytro January 2018 (has links)
9 Abstract In this Ph.D. thesis possibilities of using our proposed potential programs for a multiple-pulse amperometry and a fast scan differential pulse voltammetry in combination with flow systems are presented. The development of new sensitive amperometric and voltammetric methods for the determination of oxidisable biologically active organic compounds is another aim of this work. In the first part of the work, the flow injection system and multiple-pulse amperometric detection were employed to develop and optimize a simple, low-cost, and rapid method for the simultaneous determination of natural and synthetic antioxidants. This technique involves the application of an appropriate potential waveform consisting of a suitable sequence of pulses on a single working electrode, thus allowing distinguish the analytes in a mixture with no need of separation. Conditions for the determination of antioxidants and modelling of the potential program were tested and studied, respectively. Second part of the work describes and characterizes the application of the fast scan differential pulse voltammetry (FSDPV) in combination with the flow systems. FSDPV is the electroanalytical technique that use high scan rate to record voltammograms within several milliseconds and ensures high temporal resolution. This technique...
|
75 |
Voltametrické a amperometrické stanovení homovanilové, vanilmandlové a 5-hydroxy-3-indoloctové kyseliny / Voltammetric and amperometric determination of homovanillic, vanillylmandelic, and 5-hydroxyindole-3-acetic acidNěmečková, Anna January 2020 (has links)
Presented dissertation thesis is focused on the development of electrochemical methods for the determination of three important tumour biomarkers, namely homovanillic acid (HVA), vanillylmandelic acid (VMA), and 5-hydroxyindole-3-acetic acid (5-HIAA). First part of the study is focused on electrochemical behaviour of these analytes in batch arrangement using differential pulse voltammetry (DPV) at screen-printed carbon electrodes (SPCEs). It has been proved that presented method is sufficiently sensitive for monitoring above mentioned analytes. Moreover, it can be used for determination of HVA and VMA in mixture. Obtained limits of detection (LODs) were 0.24 µmol·L-1 for HVA, 0.06 µmol·L-1 for VMA, and 0.12 µmol·L-1 for 5-HIAA. The requirements to speed up the analysis and at the same time to reduce its price initialized our study of the determination of tested biomarkers in flow systems. Firstly, flow injection analysis with amperometric detection was investigated for the determination of all three biomarkers at the same SPCE, and then an analogous determination of structural more similar pair, HVA and VMA, was performed at a boron doped diamond electrode (BDDE). Obtained LODs of optimized methods were as follows: at SPCE 0.07 µmol·L-1 for HVA, 0.05 µmol·L-1 for VMA, and 0.03 µmol·L-1 for 5-HIAA,...
|
76 |
Využití potenciálových programů při průtokovém elektrochemickém stanovení biologicky aktivních organických látek / Utilization of potential programs in flow electrochemical determination of biologically active organic compoundsBavol, Dmytro January 2018 (has links)
9 Abstract In this Ph.D. thesis possibilities of using our proposed potential programs for a multiple-pulse amperometry and a fast scan differential pulse voltammetry in combination with flow systems are presented. The development of new sensitive amperometric and voltammetric methods for the determination of oxidisable biologically active organic compounds is another aim of this work. In the first part of the work, the flow injection system and multiple-pulse amperometric detection were employed to develop and optimize a simple, low-cost, and rapid method for the simultaneous determination of natural and synthetic antioxidants. This technique involves the application of an appropriate potential waveform consisting of a suitable sequence of pulses on a single working electrode, thus allowing distinguish the analytes in a mixture with no need of separation. Conditions for the determination of antioxidants and modelling of the potential program were tested and studied, respectively. Second part of the work describes and characterizes the application of the fast scan differential pulse voltammetry (FSDPV) in combination with the flow systems. FSDPV is the electroanalytical technique that use high scan rate to record voltammograms within several milliseconds and ensures high temporal resolution. This technique...
|
77 |
Voltametrijske metode zasnovane na primeni jednostavnih i savremenih elektroda/senzora na bazi ugljeničnih materijala za određivanje vodonik-peroksida u odabranim uzorcima / Voltammetric methods based on the application of simple and contemporary carbonaceousmaterials-based electrodes/sensors for the determination of hydrogen-peroxide in the selected samplesAnojčić Jasmina 22 November 2018 (has links)
<p>Cilj ove doktorske disertacije je bio razvoj brzih i pouzdanih voltametrijskih metoda zasnovanih na primeni jednostavnih i savremenih elektroda/senzora na bazi ugljeničnih materijala (ugljenične paste napravljene od grafitnog praha i parafinskog ulja i štampanih ugljeničnih elektroda) za određivanje H <sub>2</sub>O<sub>2 </sub>u odabranim složenim model i realnim uzorcima. U tu svrhu, ispitana je primenljivost različitih radnih elektroda. Amperometrijska metoda zasnovana na elektrodi od ugljenične paste (CPE) zapreminski modifikovane sa 5% (m:m) MnO2 je, pri optimizovanim uslovima i pri radnom potencijalu od 0,40 V u odnosu na zasićenu kalomelovu elektrodu (ZKE) u fosfatnom puferu pH 7,50 kao pomoćnom elektrolitu, omogućila kvantifikaciju H <sub>2</sub>O<sub>2</sub> u opsegu koncentracija od 1,4 do 65 µg mL -1 sa relativnom standardnom devijacijom (RSD) manjom od 10%. Ova metoda je primenjena za određivanje sadržaja H <sub>2</sub>O<sub>2 </sub>u uzorcima podzemne vode iz centralnog Banata (Pokrajina Vojvodina, Srbija) tretirane Fentonovim (Fe<sup> 2+</sup> i H <sub>2</sub>O<sub>2</sub> ) i Fentonu-sličnim (Fe <sup>3+</sup> i H <sub>2</sub>O<sub>2</sub> ) reagensima u cilju uklanjanja prirodnih organskih materija (POM) pri čemu su korišćene različite početne koncentracije gvožđa i različiti odnosi molarnih koncentracija gvožđa i H <sub>2</sub>O<sub>2</sub> . Utvrđeno je da oksidaciono stanje gvožđe (Fe<sup> 2+</sup> ili Fe <sup>3+</sup>) i molarni odnos jona Fe i H<sub> 2</sub>O<sub>2</sub> utiču na stepen potrošnje/razgradnje H<sub> 2</sub>O<sub>2</sub><br />u podzemnoj vodi sa visokim sadržajem POM. Takođe, u slučaju Fentonu-sličnog procesa, za sve početne koncentracije Fe <sup>3+</sup> i H <sub>2</sub>O<sub>2 ,</sub> signifikantna količina H <sub>2</sub>O<sub>2 </sub>ostaje neiskorišćena, što ukazuje na nižu efikasnost ovakvog sistema u poređenju sa Fentonovim procesom.Štampana ugljenična elektroda (SPCE) zapreminski modifikovana sa MnO 2 kao medijatorom je primenjena za određivanje sadržaja H<sub> 2</sub>O<sub>2</sub> u toku Fentonovog (Fe <sup>2+</sup> , H<sub>2</sub>O<sub>2</sub> ) i vidljivom svetlošću potpomognutog foto-Fentonovog (Fe<sup> 2+ </sup>, H <sub>2</sub>O<sub>2 </sub>, hν) procesa uklanjanja neonikotinoidnog insekticida acetamiprida (ACT). Pri optimizovanim uslovima (radni potencijal 0,40 V u odnosu na ZKE, fosfatni pufer pH 7,50 kao pomoćni elektrolit) amperometrijskog određivanja H <sub>2</sub>O<sub>2</sub> , postignuta je linearnost u opsegu koncentracija 0,01–1,24 mmol L-1(0,34– 42,2 µg mL -1<br />) i vrednost RSD nije prelazila 4,2%. U ispitivanimuzorcima (nakon odgovarajućeg<br />podešavanja pH vrednosti od 2,8 do 7,5 odmah nakon uzorkovanja radi stopiranja ili maksimalnog usporavanja procesa oksidacije, filtriranja, zamrzavanja i odmrzavanja neposredno pre merenja) sadržaj H <sub>2</sub>O<sub>2</sub> je određen metodom standardnog dodatka analiziranjem odgovarajućih amperometrijskih krivi. Paralelna HPLC-DAD merenja su vršena u cilju praćenja koncentracije/uklanjanja ACT. U slučaju foto-Fentonovog procesa (početne koncentracije 0,31; 2,0 i 3,0 mmol L -1 (70,0; 111,7 i 102,1 µg mL -1 ) za ACT, Fe<br /><sup>2+</sup> i H <sub>2</sub>O<sub>2</sub>, redom) nakon 10 min H <sub>2</sub>O<sub>2 </sub>je izreagovao, a može se smatrati da je ACT uklonjen nakon 5 min. U toku Fentonovog procesa ACT je uklonjen nakon 20 min tretmana i oko 10% početne koncentracije H <sub>2</sub>O<sub>2</sub> je ostalo u sistemu<br />neiskorišćeno.CPE je površinski modifikovane kompozitom na bazi nanočestica Pt (< 5 nm) i grafitizovanog ugljenika (Pt-C, 10% Pt na Vulkanu XC72) etodom nanošenja kapi. Nemodifikovana CPE i modifikovana (Pt-C/CPE) su okarakterisane primenom SEM/EDS i CV merenja. Pt-C/CPE je pokazala izuzetne elektrokatalitičke osobine u pogledu elektrohemijskeredoks reakcije H<br /><sub>2</sub>O<sub>2</sub> u poređenju sa nemodifikovanom CPE u fosfatnom puferu (0,1 mol L -1 ;<br />pH 7,50), a takođe i u acetatnom puferu (0,1 mol L -1 ; pH 4,50) kao pomoćnim elektrolitima. Prilikom amperometrijskog određivanja H <sub>2</sub>O<sub>2</sub> primenom Pt-C/CPE u model sistemima, zadovoljavajuća linearnost je postignuta u koncentracionom opseguH<sub>2</sub>O<sub>2</sub>od 0,15 do 1,45 µg mL -1 ,dok su vrednosti GO iznosile 0,06 µg mL -1 (pH 7,50, radni potencijal 0,20 V) i 0,10 µg mL -1 (pH<br />4,50, radni potencijal 0,50 V). Optimizovane analitičke metode su primenjene za određivanje sadržaja H <sub>2</sub>O<sub>2</sub> u komercijalno dostupnim proizvodima za ličnu negu: rastvoru za dezinfekciju (pH 7,50) i rastvoru za čišćenje kontaktnih sočiva (pH 4,50). Amperometrijski dobijeni rezultati su u dobrom slaganju sa rezultatima dobijenim primenom tradicionalne spektrofotometrijske metode bazirane na titanijum-sulfatu kao reagensu sa određenim koncentracijama 2,91% i 2,94% za<br />dezinfekcioni rastvor i 3,04% i 3,17% za rastvor zakontaktna sočiva, redom. RSD je bila manja od 2%. Postignuti rezultati su u dobrom slaganju sa sadržajem H<br /><sub>2</sub>O<sub>2 </sub>deklarisanim od strane proizvođača (3%) u oba ispitivana uzorka. Pt-C/CPE je takođe testirana za praćenje koncentracije H<sub>2</sub>O<sub>2</sub> u rastvoru za kontaktna sočiva u toku procesa njegove neutralizacije/razgradnje. Nakon 6 h procesa neutralizacije, 24,68 µg mL -1 je bila određena koncentracija H <sub>2</sub>O<sub>2 ,</sub> što je ispod dozvoljene<br />H<sub>2</sub>O<sub>2 </sub>koncentracije u rastvoru za kontaktna sočiva imajući u vidu granicu koja izaziva iritaciju oka. CPE je površinski modifikovana višezidnim ugljeničnim nanocevima (MWCNT) i kompozitima MnO 2 -MWCNT ili Pt-MWCNT metodom nanošenja kapi radi pripreme jednostavnih, osetljivih i pouzdanih voltametrijskih senzora za određivanje H <sub>2</sub>O<sub>2 </sub>u odabranom uzorku. Rezultati SEM/EDS analize kompozitnih materijala su potvrdili da su medijatori, čestice MnO 2 i Pt, nasumično raspoređeni na površini MWCNT i zastupljeni sa blizu 5% (m:m) u kompozitu izraženo<br />preko Mn i Pt. CV merenja su vršena sa pripremljenim radnim elektrodama u acetatnom (pH 4,50), fosfatnom (pH 7,50) i boratnom (pH 9,18) puferu kako bi se okarakterisalo osnovno elektrohemijsko ponašanje H <sub>2</sub>O<sub>2 </sub>i odabrali pogodni radni potencijali za amperometrijsko određivanje ovog ciljnog analita. Pt- WCNT/CPE je primenljiva za rad kako u fosfatnom puferu pH 7,50 tako i u acetatnom puferu pH 4,50 V kako pri negativnim tako i pri pozitivnim radnim<br />potencijalima, pri čemu su vrednosti RSD uglavnom ispod 2,5%. U slučaju MnO 2<br />-MWCNT/CPE, na potencijalu 0,30 V i višim vrednostima, oksidacioni signali H<br /><sub>2</sub>O<sub>2</sub> su signifikantni u blago alkalnoj sredini (pH 7,50), pri pH 4,50 ova elektroda pokazuje nezadovoljavajuće ponašanje, dok pri pH 9,18 ima prihvatljive performanse. Granice određivanja (GO) su bile u oblasti µg mL -1 . H <sub>2</sub>O<sub>2</sub> je određen u spajkovanom uzorku mleka metodom standardnog dodatka nakon odgovarajuće pripreme uzorka (pH podešavanje i centrifugiranje) i primenom optimizovane amperometrijske procedure (acetatni pufer pH 4,50, radni potencijal-0,75 V) koristeći Pt-MWCNT/CPE kao radnu elektrodu. RSD za tri ponovljena merenja je iznosila 2,5%, dok je prinos metode bio nešto veći od 71%.<br />Kompozitni materijali koji se sastoje od MWCNT i čestica na bazi Pd (Pd-MWCNT) ili Pt (Pt-MWCNT) su primenjeni za pripremu zapreminski modifikovanih SPCE (Pd-MWCNT-SPCE i Pt-MWCNT-SPCE) i površinski modifikovane SPCE (Pd-MWCNT/SPCE). Ove elektrode, kao i nemodifikovana SPCE i MWCNT-SPCE, su okarakterisane primenom CV i amperometrije u fosfatnom puferu pH 7,50 radi određivanja H <sub>2</sub>O<sub>2</sub> . Pd-MWCNT-SPCE i Pd-MWCNT/SPCE su se pokazale pogodnim za određivanje H <sub>2</sub>O<sub>2</sub> na radnim potencijalima između -0,50 i 0,50 V, a PtMWCNT-SPCE na ispitivanim radnim potencijalima od -0,80 do 0,70 V. Ove elektrode su zatim modifikovane enzimom glukoza oksidazom (GOx) metodom nanošenja kapi rastvora GOx i Nafion ® -a na njihovu površinu, pri čemu je optimizovana količina nanetog biofilma. GOx/PdMWCNT-SPCE je pokazala bolje analitičke performanse za određivanje glukoze u poređenju sa GOx/Pd- WCNT/SPCE. Kao optimalan radni potencijal GOx/Pd-MWCNT-SPCE je odabrana<br />vrednost potencijala -0,40 V u odnosu na ZKE, sa zadovoljavajućom linearnošću u ispitivanom opsegu koncentracija glukoze od 0,16 do 0,97 mmol L -1 (od 29,1 do 174 µg mL -1), dok je GO iznosila 0,14 mmol L -1 (25 µg mL<br />-1 ). Optimizovana metoda zasnovana na GOx/Pd-MWCNT-SPCE je uspešno primenjena za određivanje glukoze u uzorku livadskog meda. Dobijeni rezultati su u dobroj saglasnosti sa onima dobijenim primenom komercijalno dostupnog aparata za merenje glukoze. Pogodan radni potencijal za GOx/Pt-MWCNT-SPCE je bio -0,50 V u odnosu na ZKE, pri čemu je zadovoljavajuća linearnost postignuta u ispitivanom opsegu koncentracija glukoze od 65,8 do 260,6 µg mL -1 , sa GO 35 µg mL -1 . Optimizovana metoda zasnovana na GOx/Pt-MWCNT-SPCE je uspešno primenjena za određivanje glukoze u u uzorku belog grožđa i uzorku tableta (Traubenzucker-bonbons), pri čemu su dobijeni rezultati u dobroj saglasnosti sa rezultatima dobijenim primenom Accu-Chek aparata.<br />Na osnovu dobijenih rezultata može se zaključiti da su razvijene analitičke metode pre svega jednostavne, pouzdane i pogodne za dobijanje brzih informacija o sadržaju H <sub>2</sub>O<sub>2</sub> u različitim tipovima uzoraka. Svakako odabir pogodne radne elektrode, kao i optimizacija eksperimentalnih uslova su ključni faktori za uspešno određivanje H <sub>2</sub>O<sub>2</sub></p> / null / <p>The aim of this doctoral dissertation was the development of fast and reliable voltammetric methods based on the application of simple and contemporary electrodes/sensors based on carbonaceous materials (carbon paste made of graphite powder and paraffin oil and screen printed carbon electrodes) for the determination of H <span id="cke_bm_571S" style="display: none;"> </span><sub>2</sub><span id="cke_bm_571E" style="display: none;"> </span>O<sub>2</sub> in the selected complex model and real samples.For this purpose, applicability of different working electrodes was investigated.The amperometric method based on carbon paste electrode (CPE) bulk- modified with 5% (m:m) MnO 2 , under optimized conditions, with a working potential of 0.40 V vs. the saturated calomel elect<span id="cke_bm_572E" style="display: none;"> </span>rode (SCE) and a phosphate buffer solution (pH 7.50) as supporting electrolyte, enabled the quantitation of H <span id="cke_bm_577S" style="display: none;"> </span><sub>2</sub><span id="cke_bm_577E" style="display: none;"> </span>O<sub>2</sub>in the concentration interval from 1.4 to 65 µg mL −1 with a relative standard deviation (RSD) of less than 10%. This meth<span id="cke_bm_578E" style="display: none;"> </span>od was applied for the determination of the H<span id="cke_bm_583S" style="display: none;"> </span><sub>2</sub><span id="cke_bm_583E" style="display: none;"> </span>O<sub>2 </sub>consumption in samples of groundwater fro<span id="cke_bm_584E" style="display: none;"> </span>m the Central Banat region (Province of Vojvodina, Serbia) treated by the Fenton (Fe <sup>2+ </sup>and H <sub>2</sub>O<sub>2</sub> ) and Fenton- like (Fe <sup>3+</sup>and H <sub>2</sub>O<sub>2</sub> ) reagents to remove natural organic matter (NOM) at differentinitial concentrations of iron species, and of their molar ratios to the initial concentration of H<sub>2</sub>O<sub>2</sub> . It was found that the form of Fe (Fe <sup>2+</sup> or Fe <sup>3+</sup> )and the molar ratio to H <sub>2</sub>O<sub>2</sub>influenced the degree of the H<sub> 2</sub>O<sub>2</sub> decomposition in the groundwater with high NOM content. Besides, in the case of the Fenton-like process, for all initial doses of Fe <sup>3+</sup> and H<span id="cke_bm_604S" style="display: none;"> </span><sub> 2</sub><span id="cke_bm_604E" style="display: none;"> </span>O<sub>2</sub>, a sign<span id="cke_bm_605E" style="display: none;"> </span>ificant amount of H<span id="cke_bm_610S" style="display: none;"> </span><sub> 2</sub><span id="cke_bm_610E" style="display: none;"> </span>O<sub>2</sub> remained unused, whi<span id="cke_bm_611E" style="display: none;"> </span>ch also indicates a lower efficiency of such system compared to the Fenton process. Screen printed carbon electrode (SPCE) bulk-modified with MnO <sub> 2</sub> as a mediator was applied for amperometric determination of the H <span id="cke_bm_617S" style="display: none;"> </span><sub>2</sub><span id="cke_bm_617E" style="display: none;"> </span>O<sub>2</sub> content during the Fenton (Fe <sup>2+</sup> , H <span id="cke_bm_624S" style="display: none;"> </span><sub>2</sub><span id="cke_bm_624E" style="display: none;"> </span>O<sub>2 </sub>) and <span id="cke_bm_625E" style="display: none;"> </span>visible light-assisted<span id="cke_bm_618E" style="display: none;"> </span>, photo-Fenton (Fe <sup>2+ </sup> , H <span id="cke_bm_631S" style="display: none;"> </span><sub>2</sub><span id="cke_bm_631E" style="display: none;"> </span>O<sub>2</sub> , hν)<span id="cke_bm_632E" style="display: none;"> </span> based removal of neonicotinoid insecticide acetamiprid (ACT). Under optimized conditions (working potential of 0.40 V vs. SCE, phosphate buffer pH 7.50 as supporting electrolyte) amperometric determination of H <span id="cke_bm_637S" style="display: none;"> </span><sub>2</sub><span id="cke_bm_637E" style="display: none;"> </span>O<sub>2 </sub>showed a linear dynamic range from 0.01 to 1.24 mmol L -1 (from 0.34 to 42.2 µg mL -1) and the RSD did not exceed 4.2%. In the investigated samples (after appropriate pH adjustment from 2.8 to 7.5 instantly after the sampling<span id="cke_bm_638E" style="display: none;"> </span> to stop or maximum decelerate the oxidation processes, filtering, and storage of the deep- frozen sample with defrosting immediately before the measurements) the H <span id="cke_bm_643S" style="display: none;"> </span><sub>2</sub><span id="cke_bm_643E" style="display: none;"> </span>O<sub>2</sub> contents were determined by the standard addition method by analyzing the corresponding amperometric curves. Parallel HPLC-DAD measurements were performed to monito<span id="cke_bm_644E" style="display: none;"> </span>r the concentration/removal of ACT. In the case of the photo- Fenton process (initial concentrations: 0.31; 2.0 and 3.0 mmol L -1 (70.0; 111.7 and 102.1 µg mL -1 ) of ACT, Fe<sup> 2+</sup> and H <span id="cke_bm_650S" style="display: none;"> </span><sub>2</sub><span id="cke_bm_650E" style="display: none;"> </span>O<sub>2</sub>, respec<span id="cke_bm_651E" style="display: none;"> </span>tively) after 10 min of irradiation H <span id="cke_bm_656S" style="display: none;"> </span><sub>2</sub><span id="cke_bm_656E" style="display: none;"> </span>O<sub>2</sub> was consumed and it can be consi<span id="cke_bm_657E" style="display: none;"> </span>dered that ACT was removed after 5 min. During the Fenton process ACT was removed after 20 min of treatment and around 10% of the initial concentration of the H 2O2 remained still unused.<br />CPE was surface modified with a composite of Pt nanoparticles (< 5 nm) on graphitized carbon (Pt-C, 10% Pt on Vulcan XC72) by simply dropcoating method. The unmodified CPE and the modified one (Pt-C/CPE) were characterized by EM/EDS and CV measurements. The PtC/CPE showed remarkable electrocatalytic propertiestoward the electrochemical redox reaction of H<span id="cke_bm_662S" style="display: none;"> </span><sub>2</sub><span id="cke_bm_662E" style="display: none;"> </span>O<sub>2</sub> compared to modified CPE in phosphate buffer (0.1 mol L -1 ; pH 7.50), as well in acetatebuffer (0.1 mol L -1 ; pH .50) supporting electrolytes. Amperometry of H2O2 in the concentration range from 0.15 to 1.45 µg mL -1 with the Pt-C/CPE showed acceptable linearity, while the obtained values of LOQs were 0.06 µg mL -1 (pH 7.50, working potential 0.20 V) and 0.10 µg mL -1 (pH 4<span id="cke_bm_663E" style="display: none;"> </span>.50, working potential 0.50 V). The proposed analytical methods were applied to the determination of the H 2O2 content in commercially available personal care products; i.e., disinfection (pH 7.50) and contact lens cleaning solutions (pH 4.50). The obtained amperometric results are in good agreement with those measured by traditional titanium sulfatereagent based spectrophotometric method with determined concentrations as 2.91% and 2.94% for the disinfection product, and 3.04% and 3.17% for the contact lens solution, respectively. RSD was lower than 2%. The obtained results are in a good agreement with the amounts of the H<span id="cke_bm_668S" style="display: none;"> </span><sub> 2</sub><span id="cke_bm_668E" style="display: none;"> </span>O<sub>2 </sub>declared by producers (3%) in the both investigated samples. The Pt-C/CPE was also tested for monitoring of the H<span id="cke_bm_674S" style="display: none;"> </span><sub> 2</sub><span id="cke_bm_674E" style="display: none;"> </span>O<sub>2</sub> residual concentration in contact lens solution during its neutralization/decomposition rocess. At 6 h of<span id="cke_bm_675E" style="display: none;"> </span> neutralization treatment 24.68 µg mL -1 of the H <span id="cke_bm_680S" style="display: none;"> </span><sub>2</sub><span id="cke_bm_680E" style="display: none;"> </span>O<sub>2 </sub>was determined which is almost half of the allowedH2<span id="cke_bm_681E" style="display: none;"> </span>O2 concentration in the case of the contact lens solution concerningthe limit of eye irritation. CPE was surface modified with multiwalled carbon nanotubes (MWCNT) and with composites of MnO<sub> 2 </sub>-MWCNT or Pt-MWCNT by drop coating method to prepare simply, sensitive and reliable volta<span id="cke_bm_669E" style="display: none;"> </span>mmetric sensors for the determination of H <span id="cke_bm_687S" style="display: none;"> </span><sub>2</sub><span id="cke_bm_687E" style="display: none;"> </span>O<sub>2 </sub>in selected sample. The results of the SEM/<span id="cke_bm_688E" style="display: none;"> </span>EDS analysis of composite materials have confirmed that the mediators, MnO <sub>2</sub> and Pt articles, are randomly distributed on the surface of MWCNT and represent nearly 5% (m:m) of the composite expressed as Mn and Pt. CV measurements were performed with prepared electrodes in acetate (pH 4.50), phosphate (pH 7.50) and borate (pH 9.18) buffers to characterize the basic electrochemical behavior of H <span id="cke_bm_694S" style="display: none;"> </span><sub>2</sub><span id="cke_bm_694E" style="display: none;"> </span>O<sub>2</sub> and to select the working potentials suitable for amperometric determination of this target analyte. The Pt-MWCNT/CPE performs well in phosphate buffer pH .50 and acetate buffer solution pH 4.50 in the negative as well as in the positive polarization range with RSD mainly lower than 2.5%. In case of MnO<sub> 2 </sub>-MWCNT/CPE at <span id="cke_bm_695E" style="display: none;"> </span>0.30 V and above the H<span id="cke_bm_701S" style="display: none;"> </span><sub>2</sub><span id="cke_bm_701E" style="display: none;"> </span>O<sub>2 </sub>oxidation signal is rem<span id="cke_bm_702E" style="display: none;"> </span>arkable in slightly alkaline media (pH 7.50), at pH 4.50 this electrode showed poor behavior and at pH 9.18 offered acceptable performance. LOQs were in the µg mL -1 concentration range. H<span id="cke_bm_707S" style="display: none;"> </span><sub>2</sub><span id="cke_bm_707E" style="display: none;"> </span>O<sub>2 </sub>was determined in a spiked milk sample by standard addition method after appropriate sample preparation (pH adjustment and centrifugation) and using optimized amperometric p<span id="cke_bm_708E" style="display: none;"> </span>rocedure (acetate buffer pH 4.50, working potential -0.75 V) by Pt-MWCNT/CPE as a working electrode. RSD for three repeated measurements was 2.5%, while the recovery of the method was a bit higher than 71%. The composite materials consisting of MWCNT and Pd (Pd-MWCNT) or Pt containing particles (Pt-WCNT) were applied to the preparation of bulk- modified SPCEs (Pd-MWCNTSPCE and Pt-MWCNT-SPCE) and surface modifiedSPCE (Pd- MWCNT/SPCE). These electrodes, as well as unmodified SPCE and MWCNT-SPCE, were characterized by CV and amperometry in phosphate buffer solution of pH 7.50 for the H<span id="cke_bm_713S" style="display: none;"> </span><sub> 2</sub><span id="cke_bm_713E" style="display: none;"> </span>O<sub>2 </sub>determination. Pd-MWCNT-SPCE and PdMWCNT/SPCEare convenient for the etermination of H 2O2 at working potentials from -0.50 to 0.50 V, and Pt-MWCNT-SPCE at investigated working potentials in the range from -0.80 to 0.70 V. These electrodes were then modified with glucose oxidase (GOx) by drop coating a solution of GOxand Nafion ® on their surface, whereby the applied amount of biococktail was optimized. GOx/PdMWCNT-SPCE showed better analytical performance for glucose determination in comparison with GOx/Pd-MWCNT/SPCE. The optimal working potential for GOx/Pd-MWCNT- SPCE was -0.40 V vs. SCE and <span id="cke_bm_714E" style="display: none;"> </span>satisfactory linearity was obtained in the investigated glucose concentration range from 0.16 to 0.97 mmol L -1 (from 29.1 to 174 µg mL -1 ), hile the LOQ was 0.14 mmol L -1 (25 µg mL -1 ). The optimized method based on GOx/Pd-MWCNT-SPCE was successfully applied to the determination of glucose in multifloral honey sample. The results are in a good agreement with those obtained by commercially available equipment for determination of glucose. Optimal working potential for GOx/Pt-MWCNT-SPCE was -0.50 V vs. SCE, and the satisfactory linearity was obtained in the investigated concentration range ofglucose from 65.8 to 260.6 µg mL -1 , with LOQ of 35 µg mL -1 . The optimized method based on GOx/Pt- MWCNT-SPCE was successfully applied for determination of glucose in white grape and glucose tablets (Traubenzucker-bonbons) samples, whereby the obtained results were in a good agreement with the results obtained by Accu-Chek device. Based on the results, the developed analytical methods are first of all simple, reliable and suitable for obtaining fast information about the content of H <sub>2</sub>O<sub>2</sub> in different types of samples. Certainly the selection of a suitable working electrode, as well as the optimization of experimental conditions are key factors for the successful determination of H<sub>2</sub>O<sub>2 </sub>.</p>
|
Page generated in 0.0376 seconds