Density Functional Theory (DFT) was used to study fundamental characteristics of electrides. Electronic structure calculations were performed with the generalized gradient approximation (GGA) and GGA+U (U- “on-site" electron-electron repulsion). Fundamental properties of Y2C were investigated in the first project. The nature of strongly localized anionic electrons in Y2C was demonstrated using the distribution of charge density. Magnetic properties were analyzed with magnetization density and magnetic anisotropy energies. The magnetic anisotropy of Y2C originates from anionic electrons at interlayer spaces. The predicted work functions are in good agreement with reported experimental data. We also investigated the enhancement of magnetic properties by varying the degree of localization of anionic electrons. The exchange splitting of interstitial electrons is more prominent than that of d-orbitals of Y and exchange splitting increases with decreasing c-axis parameter. In the second study, fundamental properties of Gd2C are discussed. The GGA+U method was applied for 4f states of Gd and predicted the best U value. Our model predicted Gd2C has a layered-hexagonal structure. Local density of states (LDOS) and projected density of states (PDOS) were analyzed for understanding of anionic electrons and atoms on magnetic and electronic properties. The Curie temperatures of Gd and Gd2C were calculated and noticed that interactions in Gd2C are influential to increase the Curie temperature. The chemical formula can be written as [Gd2C]1.9.1.9e- from charge analysis. Additionally, fundamental properties of two ionized states, Q=+1 and Q=+2 were studied. Results indicate anionic electrons at interlayer spaces will initiate the ejecting of electrons. Density functional perturbation theory (DFPT) with DFT under the harmonic approximations was applied to study the structural stabilities, phase transitions and variation of thermodynamic quantities at finite temperature of two phases of Hf2S. Phonon dispersion curves without any imaginary frequencies are evidence for stability of two phases. The resulting quadratic flexural phonon branch indicates Hf2S has 2D characteristics. At T= 0 K the Helmholtz free energy of anti- NbS2 structure of Hf2S lies ≈23 kJ/f.u. below that of the higher energy phase. The critical temperature for the phase transition was estimated, and the effect of finite temperature on thermodynamics quantities were studied.

No description available.

No description available.

No description available.

In an effort to synthesize macromolecules comprising both covalent and non-covalent bonding to tune ultimate physical properties, a variety of methodologies and functionalization strategies were employed. First, protected functional initiation, namely 3-[(N-benzyl-N-methyl)amino]-1-propyllithium and 3-(t-butyldimethylsilyloxy)-1-propyllithium, in living anionic polymerization of isoprene was used to yield well-defined chain end functional macromolecules. Using both initiating systems, polymers with good molar mass control and narrow molar mass distributions were obtained and well-defined chain end functionality was observed. There was no observed effect on the polymer microstructure from the polar functionality in the initiator, with ~92% 1,4- and 8% 3,4-enchainment observed in each case. Further investigation of the 3-[(N-benzyl-N-methyl)amino]-1-propyllithium initiated polyisoprenes proved that facile deprotection was not possible and residual catalyst was not removable from the polymer. However, polymers initiated with 3-(t-butyldimethylsilyloxy)-1-propyllithium were quantitatively hydrogenated and deprotected under relatively mild conditions to yield hydroxyl functional macromolecules in several architectures, including linear and star-shaped. Excellent conversion from arm polymer to star polymer was observed and well-defined macromolecules were obtained. Subsequently, a series of non-functional, hydroxyl functional, and 2-ureido-4[1H]-pyrimidone (UPy) chain end functional linear and star-shaped poly(ethylene-co-propylene)s were synthesized and characterized. The melt phase properties were investigated using melt rheology and the effect of macromolecular topology and multiple hydrogen bond functionality was investigated. Linear UPy functional poly(ethylene-co-propylene)s exhibited increased viscosity and shear thinning onset at lower frequencies than non-functional polymers of similar molar mass due to interaction of the multiple hydrogen bonding groups. Star-shaped UPy functional poly(ethylene-co-propylene)s showed inhibition to terminal flow and the absence of a zero shear viscosity in melt rheological characterization, indicative of a network like structure imparted from the multiple hydrogen bonding interactions. In addition, the living anionic polymerization of D3 was controlled using the functionalized initiators3-[(N-benzyl-N-methyl)amino]-1-propyllithium and 3-(t-butyldimethylsilyloxy)-1-propyllithium. Good molar mass control and narrow molar mass distributions were observed. In contrast to the polyisoprene homopolymers, facile deprotection of the 3-(t-butyldimethylsilyloxy)-1-propyllithium was not possible due to the acid sensitivity of the poly(dimethylsiloxane) backbone. However, facile deprotection of the protected secondary amine was achieved through hydrogenolysis and well-defined terminal amine functionalized poly(dimethylsiloxane) was synthesized, which are then amenable to further functionalization reactions. In contrast to the well-defined polymers synthesized using living anionic polymerization, free radical polymerizations was used to synthesize free radical copolymers with broader polydispersities and pendant UPy groups. These copolymers were compared with a simple dimeric hydrogen bonding carboxylic acid containing copolymer. Melt rheological characterization revealed that, at similar concentrations, the effect of the UPy group was much greater than the carboxylic acid, and broadened plateau moduli and increased viscosity for the UPy containing polymers were observed, while the acid containing polymer exhibited similar results to a non-functional control. The dynamic viscosity was observed to increase systematically with increasing UPyMA incorporation and the quadruple hydrogen bonding interactions were observed to dissociate between ~80-150 °C. / Ph. D.

The class of ligands represented by [CpCo(P(O)(OR)2)3]-, L- , were first synthesized by W. Kläui in 1977. These ligands have been found to coordinate to a variety of low and high oxidation state metals through the use of its three P=O oxygen atoms as donors. The ligands act as mono-anionic six electron donors which make them similar to the more widely known cyclopentadienyl ligands, (C5H5-xRx)-, but have electronic properties like those of fluoride or oxide. Also, it has been found that the coordination chemistry of L- resembles the unsubstituted tris(pryrazolyl)hydroborato six electron ligand, (RB(pz)3)-. All three of these ligands can be modified by changing the substituent R. The Kläui ligand offers a good opportunity to synthesize a chiral derivative. In the process to obtain the chiral version, (cyclopentadienyl)tris(biphenyl-phosphito-P)cobaltate(1-), 18, was synthesized from 2,2'-biphenol. This was characterized through NMR, mass spectroscopy, and XPS. Next, a racemic version, (cyclopentadienyl)tris(biphenylphosphito-P)cobaltate(1-), 17, was synthesized from (±)1,1′-bi-2-naphthol. A one-pot synthesis for the rac-binaphthyl phosphite derivative was developed with an increased yield from the previously published synthesis. The racemic version of the ligand was characterized by NMR and mass spectroscopy. The chiral version has not yet been synthesized, however, by following the developed procedure for the non-chiral version, the ligand could be synthesized from optically active 1,1'-bi-2-naphthol. / Master of Science

Ion-containing macromolecules continue to stimulate new opportunities for emerging electro-active applications ranging from high performance energy devices to water purification membranes. Progress in polymer synthesis and engineering now permit well-defined, ion-containing macromolecules with tunable morphologies, mechanical performance, ion conductivity, and 3D structure in order to address these globally challenged technologies. Achieving tailored chemical compositions with high degrees of phase separation for optimizing conductivity and water adsorption remains a constant synthetic challenge and presents an exciting opportunity for engineering sophisticated macromolecular architectures. This dissertation will introduce unprecedented charged polymers using conventional free radical and anionic polymerization to incorporate ionic functionalities based on phosphonium cations. This new class of copolymers offers unique properties with ionic functionality for tailorable electro-active performance. / Ph. D.

No description available.

The main aim of this project was to investigate the possibility of manufacturing 3D parts of polyamide (nylon or PA) 6 by inkjetting its monomer caprolactam (CL). The principle of this process was similar to the other rapid prototype (RP) and rapid manufacturing (RM) processes in which a 3D part is manufactured by layer on layer deposition of material. PA6 was used as the thermoplastic polymer in this work because of its good properties and also because PA6 can be produced by heating its monomer (i.e. plus catalyst and activator) in a short time. Two polymerisation mixtures of CL-catalyst (mixture A) and CL-activator (mixture B) are intended to be jetted separately using conventional jetting heads and polymerise shortly after heating. Anionic polymerisation of CL (APCL) was investigated in the bulk and on a smaller scale. Sodium caprolactamate (CLNa and C10) and caprolactam magnesium bromide (CLMgBr) were used as catalysts and N-acetylcaprolactam (ACL) and a di-functional activator (C20) were used as activators. The influence of polymerisation conditions was investigated and optimised. These were catalyst-activator concentration, polymerisation temperature and the influence of the polymerisation atmosphere. The physical properties (monomer conversion, crystallinity, and viscosity average molecular weight) of PA6 samples produced using each catalyst-activator combinations were measured and compared. Small scale polymerisation was carried out using a hotplate, by hot stage microscopy and using differential scanning calorimetry (DSC). The influence of heating strategy on small scale polymerisation was studied using DSC. The polymerisation mixture compositions were characterised using rheometry, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and optical microscopy to investigate their suitability in jetting for using the available jetting heads. It was shown that the combination of CLMgBr-ACL resulted in fast polymerisation which was not sensitive to moisture. The C10-C20 combination resulted in fast polymerisation with the best properties in a protected environment (nitrogen); however, the polymerisation was affected by moisture in air and the properties of polymer produced and rate of polymerisation decreased in air. Polymers produced using CLNa-ACL had the poorest properties and polymerisation did not occur in air. Material characterisation showed that micro-crystals of CLMgBr existed in CLMgBr-CL mixture at the jetting temperature (80oC) which were too large to be jetted. However, the mixture of C10 in CL could be partially jetted. The activator mixtures had similar properties to CL and were easily jetted. Drop on drop polymerisation was carried out by dripping droplets of mixtures A and B (at 80oC) on top of each other on a hotplate at the polymerisation temperature. Small scale polymerisation in a DSC showed that the monomer conversion increased with increase in polymerisation temperature from 140oC to 180oC and decreased from 180oC to 200oC. The crystallinity of the polymer produced in the DSC decreased with increase in polymerisation temperature. Hot stage microscopy produced evidence for simultaneous polymerisation and crystallisation processes on heating. Small scale polymerisation in an oven and analysed by DSC showed that increasing catalystactivator concentration resulted in increasing monomer conversion and decrease in crystallinity. Monomer conversion also increased with increase in polymerisation temperature and polymerisation time. Comparison between small scale and bulk polymerisations shows a good agreement between the two polymerisation rates. This shows that the polymerisation mechanism did not change significantly when the quantity of materials was reduced to less than 20mg. Finally, the polymerisation was carried out in a DSC after jetting C10-CL and C20-CL mixtures into a DSC pan using a jetting system, which was made in another work.

Brevetoxins are natural neurotoxins that are produced by “red tide” algae. In this study, brevetoxin-1 and brevetoxin-2 were incubated with rat liver hepatocytes and rat liver microsomes, respectively. After clean-up steps, samples were analyzed by liquid chromatography-electrospray mass spectrometry (LC-ES-MS). Two metabolites were found for brevetoxin-1: brevetoxin-1-M1 (MW 900 Da), formed by converting one double bond in the E or F ring into a diol; and brevetoxin-1-M2 (MW 884 Da), a hydrolysis product of brevetoxin-1 involving opening of the lactone ring. The incubation study of brevetoxin-2 found two metabolites. Brevetoxin-2-M1 (MW 912 Da) was elucidated by negative mode LC-MS/MS to be the hydrolysis product of brevetoxin-2. The second metabolite (brevetoxin-2-M2, MW 896 Da) was deduced to be brevetoxin-3. All brevetoxins have high affinities for sodium ions. Attempts to obtain informative product ions from the collision induced decomposition (CID) of [M + Na]+ brevetoxin precursor ions only resulted in uninformative sodium ion signals. In our nano-electrospray experiments, the addition of ammonium fluoride resulted in the formation of the ammonium adduct or protonated brevetoxin with a concomitant decrease of the sodium adduct peak. Product ion spectra of [M + NH4]+ and [M + H]+ were similar and provided useful structural information. The optimal values for ammonium fluoride concentration and the cone voltage were experimentally determined. In negative mode electrospray, without additives, deprotonated molecules of brevetoxins do not appear in high abundances, and thus are not well-suited for CID experiments. Several anions were tested for their abilities to form brevetoxin-anion adducts by mixing ammonium salts of these anions with brevetoxin-2 and brevetoxin-3. Under CID, [M + Cl]-, [M + Br]-, [M + OAc]-, [M + HCOO]-, [M + NO3]- adducts all produced only the respective anions in CID experiments, and thus, gave no structural information. In contrast, upon CID, both [M + F]- and [M + HCO3]- precursor adducts gave structurally-informative fragment peaks that exhibited similarities to those of [M - H]- ions; the detailed fragmentation mechanisms are discussed. In comparison, fluoride is a better choice to study brevetoxins in negative ES-MS by the anionic adduct approach.