Passive millimeter-wave (PMMW) imaging is a technique that allows the detection of inherent millimeter-wave radiation emitted by bodies. Since different bodies with varying properties emit unequal power intensities, a contrast can be established to detect their presence. The advantage of this imaging scheme over other techniques, such as optical and infrared imaging, is its ability to operate under all weather conditions. This is because the relatively long wavelengths of millimeter-waves, as compared to visible light, penetrate through clouds, fog, and sandstorms. The core of a PMMW camera is an antenna, which receives the electromagnetic radiation from a scene. Because PMMW systems require high gains to operate, large antenna arrays are typically employed. This mandatory increase of antenna elements is associated with a large feeding network. Therefore, PMMW cameras usually have a big profile. In this work, two enabling technologies, namely, Substrate integrated Waveguide (SIW) and Low Temperature Co-fired Ceramic (LTCC), are coupled with an innovative design to miniaturize the passive front-end. The two technologies synergize very well with the shielded characteristics of SIW and the high density multilayer integration of LTCC. The proposed design involves a novel multilayer power divider, which is incorporated in a folded feed network structure by moving between layers. The end result is an efficient feeding network, which footprint is least affected by an increase in array size. This is because the addition of more elements is accommodated by a vertical expansion rather than a lateral one. To characterize the feed network, an antenna array has been designed and integrated through efficient transitions.The complete structure has been simulated and fabricated. The results demonstrate an excellent performance, manifesting in a gain of 20 dBi and a bandwidth of more than 11.4% at 35 GHz. These values satisfy the general requirements of a PMMW system.

International Telemetering Conference Proceedings / October 25-28, 1993 / Riviera Hotel and Convention Center, Las Vegas, Nevada / Two different types of tracking feeds are currently used in the majority of telemetry tracking antenna systems when autotrack operation is required. They are of the conical scanner or of the single channel monopulse family and they employ well known technologies. In broadband applications, these feeds all suffer from the same inherent degradation in efficiency caused by their inability to maintain a constant crossover loss value and by their failure to properly illuminate the reflector. In high dynamics situations they can also generate unwanted and sometimes detrimental modulation whenever on-axis tracking is not maintained. In addition, currently available versions of the conical scanner are not capable of high scan rates or of scan rate agility and they are ill-suited for use in tracking systems based on non-orthogonal axes positioners. This paper describes a new high efficiency tracking feed system based on proven conical scanner technology. Its design incorporates features such as variable crossover, steerable beam, high scan rates, scan rate agility as well as stable reference coordinate system. In addition to these features, this new feed is also capable of delivering, in all but one operational category, levels of performance superior to that achievable to date by any other implementation of the conical scanner or of the single channel monopulse technology.

Reduced-control antenna arrays reduce the number of controls required for beamforming while maintaining a given array aperture. A reduced-control array for direction finding (DF), inspired by the concept of compressive sensing (CS), was recently proposed which uses random compression weights for combining antenna-element signals into fewer measurements. However, this compressive array had not been studied in terms of traditional characteristics such as directivity, sidelobe level (SLL) or beamwidth. In this work, random compression weights are shown to be suboptimal and a need for the optimisation of compressive arrays is expressed. Existing codebook optimisation algorithms prove to be the best starting point for the optimisation of compressive arrays, but are computationally complex. A computationally efficient codebook optimisation algorithm is proposed to address this problem, which inspires the compressive-array optimisation algorithm to follow. Compressive antenna arrays are formulated as a generalisation of reduced-control arrays and a framework is presented for their optimisation in terms of SLL. By allowing arbitrary compression weights, compressive arrays are shown to improve on existing reduced-control techniques. A feed network consisting of interconnected couplers and fixed phase shifters is proposed, enabling the implementation of compressive arrays in microwave hardware. The practical feasibility of compressive arrays is illustrated by successfully manufacturing a 3-GHz prototype compressive array with integrated antenna elements. / Thesis (PhD)--University of Pretoria, 2020. / Electrical, Electronic and Computer Engineering / PhD / Unrestricted

No description available.

No description available.

No description available.