This thesis set out to explore the conformational properties of short designed peptide sequences, in which transitions between structural states may be anticipated. The use of conformationally constrained residues like α-aminoisobutyric acid (Aib) and D-proline (DPro) permits the design of model sequences for structural studies. The principle of imposing conformational constraints by multiple substitutions at backbone atoms in aminoacid residues may also be extended to the higher homologs of α-amino acids, namely β and residues. The experimental results presented in this thesis also examine the potential of using cross-strand interactions between aromatic residues as a probe of structure in designed peptide β-hairpins. Chapter 1 provides a very brief introduction to the necessary background on which the experimental studies in this thesis are based. Chapter 2 describes studies aimed at establishing chain length effects on helix-hairpin conformational distributions in short synthetic sequences, containing centrally positioned Aib-DAla and Aib-Aib segments.The Aib-DAla dipeptide segment has a tendency to form both type-I'/III' and type-I/III β-turns. The occurrence of prime turns facilitates the formation of β-hairpin conformations, while type-I/III turns can nucleate helix formation. The octapeptide Boc-Leu-Phe-Val-Aib-DAla-Leu-Phe-Val-OMe (1) has been previously shown to form a β-hairpin in the crystalline state and in solution. The effects of sequence truncation have been examined using the model peptides Boc-Phe-Val-Aib-Xxx-Leu-Phe-NHMe (2, 6), Boc-Val-Aib-Xxx-Leu-NHMe (3, 7) and Boc-Aib-Xxx-NHMe (4, 8), where Xxx = DAla, Aib. For peptides with central Aib-Aib segments, Boc-Phe-Val-Aib-Aib-Leu-Phe-NHMe (6), Boc-Val-Aib-Aib-Leu-NHMe (7) and Boc-Aib-Aib-NHMe (8) local helical conformations have been established by NMR studies in both hydrogen bonding (CD3OH) and non-hydrogen bonding (CDCl3) solvents. In contrast, the corresponding hexapeptide Boc-Phe-Val-Aib-DAla-Leu-Phe-Val-NHMe (2) favors helical conformations in CDCl3 and β-hairpin conformations in CD3OH. β-Turn conformations (type-I /III) stabilized by intramolecular 4 1 hydrogen bonds are observed for the peptide Boc-Aib-DAla-NHMe (4) and Boc-Aib-Aib-NHMe (8) in crystals. The tetrapeptide Boc-Val-Aib-Aib-Leu-NHMe (7) adopts an incipient 310-helical conformation stabilized by three 4 1 hydrogen bonds. The peptide Boc-Val-Aib-DAla- Leu-NHMe (3) adopts a novel -turn conformation, stabilized by three intramolecular hydrogen bonds (two 4 1 and one 5 1). The Aib-DAla segment adopts a type-I' β-turn conformation. The observation of the NOE Val(1) NH HNCH3 (5), in CD3OH, suggests that the solid state conformation of peptide 3 is maintained in methanol solutions. Peptide hairpins provide an ideal scaffold for exploring cross-strand interactions between residues on facing antiparallel strands. Chapter 3 reports studies directed towards probing, aromatic interactions between facing Phe residues, positioned at the non-hydrogen bonding positions in designed octapeptide β-hairpins. The studies described in this Chapter employ ring current shifted aromatic proton resonances as a means of probing aromatic ring orientations. Crystal structures of eight peptide -hairpins with the sequence Boc-Leu-Phe-Val-Xxx-Yyy-Leu-Phe-Val-OMe revealed that the Phe(2) and Phe(7) aromatic rings are in close spatial proximity, with a centroid-centroid distance (Rcen) of 4.4Å to 5.4Å between the two phenyl rings. Proton NMR spectra in chloroform and methanol solutions reveal a significant upfield shift of the Phe(7) C , ′ H2 protons (6.65 ppm to 7.04 ppm). Specific assignments of the aromatic protons have been carried out in the peptide Boc-Leu-Phe-Val-DPro-LPro-Leu-Phe-Val-OMe (6). The anticipated ring current shifts have been estimated from the aromatic ring geometries observed in crystals for all eight peptides. Only one of the C , ′ H proton lies in the shielding zone, with rapid ring flipping, resulting in averaging between the two extreme chemical shifts. An approximate estimate of the population of conformations which resemble crystal state orientations may be obtained. Key nuclear Overhauser effects (NOEs) between facing Phe sidechains provide support for close similarity between the solid state and solution conformations. Temperature dependence of aromatic ring proton chemical shifts and line widths for peptide 6 (Boc-Leu-Phe-Val-DPro-LPro-Leu-Phe-Val-OMe) and the control peptide Boc-Leu-Val-Val-DPro-Gly-Leu-Phe-Val-OMe establish an enhanced barrier to ring flipping, when the two Phe rings are in proximity. Modeling studies suggest that small, conformational adjustments about the C -C ( 1), and C -C ( 2) bonds of the Phe residues may be required in order to permit unhindered, uncorrelated flipping of both the Phe rings. The maintenance of specific aromatic ring orientations in organic solvents provides evidence for significant stabilizing interactions. Earlier studies from this laboratory established that a centrally positioned DPro-LPro-DAla segment could induce hairpin formation in nonapeptide sequences, facilitated by a three residue loop segment. The DAla residue at position 6 in the nonapeptide Boc-Leu-Phe-Val-DPro-LPro-DAla-Leu-Phe-Val-OMe has been shown to adopt a left handed helical (αL) conformation. The studies described in Chapter 4, examine the effects of aminoacid replacements at positions 5 and 6. NMR studies on eight nonapeptides, with the general sequence Boc-Leu-Phe-Val-DPro-Xxx-Yyy-Leu-Phe-Val-OMe are described. In the case of peptides with a central DPro-LPro-Yyy sequence, two kinds of hairpin conformations are formed in solution. These are; i) β-hairpin structures with a central three residue loop, resulting in registered antiparallel tripeptide strands, and ii) a slipped hairpin structure, nucleated by a central DPro-LPro type-II β-turn, with residue 6 being incorporated into the C-terminal strand. The three residue loop β-hairpins are favored for DAla(6) and Aib(6), while the LAla(6) peptide favors a “slipped” hairpin structure. Replacement of the Pro(5) residue by LAla results in a reduced population of three residue hairpins in the nonapeptide with the DPro-LAla-DAla segment. Replacement of Pro(5) by Aib, abolished hairpin formation. Aromatic proton chemical shifts provide a convenient diagnostic for the presence of three residue loop hairpin conformations in these nonapeptides. A great deal of current interest has focused on the conformations of peptides incorporating β and γ aminoacid residues. Earlier studies from this laboratory have focused on the conformational properties of the β,β -disubstituted γ residue gabapentin (1-aminomethylcyclohexane acetic acid). Subsequent work with the related β aminoacid β3,3Ac6c (1-aminocyclohexaneacetic acid) revealed that intramolecularly hydrogen bonded conformations are infrequently observed in short peptides. The studies described in Chapter 5, examine the conformational properties for model peptides containing the isomeric β-aminoacid, β2,2Ac6c (1-aminomethylcyclohexane-1-carboxylic acid). The effect of gem dialkyl substituents on the backbone conformations of amino acid residues in peptides, has been investigated using four model peptides, Boc-Xxx-2,2Ac6c-NHMe [Xxx = Leu (1), Phe(2)] and Boc-Xxx- 3,3Ac6c-NHMe [Xxx = Leu (3), Phe(4)]. Tetrasubstituted carbon atoms restrict the ranges of stereochemically allowed a C11 helical turn, which is a backbone expanded analog of the type III -turn in sequences. The crystal structure of the peptide Boc-Phe- 3,3Ac6c-NHMe (4) establishes a the asymmetric unit adopt backbone torsion angles of opposite signs. In one of the molecules, the Phe residue adopts an unfavourable backbone conformation, with the energetic penalty being offset by favourable aromatic interactions between proximal molecules in the crystal. NMR studies provide evidence for the maintenance of folded structures in solution, in these hybrid sequences. The result presented in this thesis suggests that it should be possible to construct designed synthetic peptides, which can undergo transitions between two distinct and energetically favourable conformational states. The ability to design peptide sequences that can undergo switching between helical and β-hairpin states, or between hairpin structures with variations in connecting loop length may prove valuable in providing further insights into the factors influencing conformational dynamics.

We have investigated the noncovalent interactions in carbohydrate-aromatic interactions which are pivotal to the recognition of carbohydrates in proteins. We have employed quantum mechanical methods to study carbohydrate-aromatic complexes. Due to the importance of dispersion contribution to the interaction energy, we mainly use density functional theory augmented with an empirical correction for the dispersion interactions (DFT-D). We have validated this method with a limited number of high level ab initio calculations. We have also analysed the vibrational and NMR chemical shift characteristics using the DFT-D method. We have mainly studied the complexes involving β-glucose with 3-methylindole and p-hydroxytoluene, which are analogues of tryptophan and tyrosine, respectively. We find that the contribution for interaction energy mainly comes from CH/π and OH/π interactions. We find that the interaction energy of complexes involving CH/π and OH/π interactions is reflected in the associated blue and red shifts of vibrational spectrum. We also find that the interactions involving 3-methylindole are somewhat greater than those for p-hydroxytoluene. The C-H blueshifts are also in parallel with the predicted NMR proton shift. We have also tested different density functionals including both standard density functionals and newly developed M0x functionals and MP2 method for studying carbohydrate-aromatic complexes. The DFT-D method and M06 functionals of the M0x family are found to perform better, while B3LYP and BLYP functionals perform poorly. We find that the inclusion of a dispersion term to BLYP is found to perform better. The dispersion energy dominates over the interaction energy of carbohydrate-aromatic complexes. From the DFT-D calculations, we found that the complexes would be unstable without the contribution from dispersive energy. We have also studied the importance of noncovalent interactions in functionalization of nanotubes by nucleic acid bases and aromatic amino acids by using semi-empirical methods with dispersion term such asPM3-D and PM3-D*. We find that the both semi-empirical schemes give reasonable interaction energies with respect to DFT-D interaction energies. We have also used PM3-D method to study the adsorption of organic pollutants on graphene sheet and on nanotubes. We found that the semi-empirical schemes, which are faster and cheaper, are suitable to study these larger molecules involving noncovalent interactions and can be used as an alternative to DFT-D method. We have also studied the importance of dispersion interaction and the effect of steric hindrance in aggregation of functionalized anthracenes and pentacenes. We have also employed molecular dynamics simulation methods to study the aggregation of anthracene molecules in toluene solution.

Résumé indisponible / This PhD work is dedicated to investigate potentialities of phthalocyanines materials to realize a Quartz Crystal Microbalance (QCM) sensor for Benzene, Toluene and Xylenes (BTX) detection in air. The goal is to develop a sensor-microsystem capable of measuring BTX concentrations quantitatively below the environmental guidelines with sufficient accuracy. To achieve these objectives, our strategies mainly focused on experimental works encompassing sensors realization, sensing material characterizations, development of gas-testing facility and sensor testing for different target gases. One of the main aims is to identify most appropriate phthalocyanine material for sensor development. After comparative sensing studies, tert-butyl-copper phthalocyanine based QCM device is found as most sensitive and detail metrological characteristics are further investigated. Results show repeatable, reversible and high magnitude of response, low response and recovery times, sub-ppm range detection limit, high resolutions and combined selectivity of BTX gases among common atmospheric pollutants. Special focus is given to understand the gas/material interactions which are achieved by (a) XRD and SEM characterizations of sensing layers, (b) formalization of a two-step adsorption model and (c) assessing extent of diffusion of target gas in sensing layer. At last, possible ageing of sensor and suitable storage conditions to prevent such effect are investigated.

This thesis describes NMR studies which probe weak interactions between amino acid side chains in folded peptide structures. Aromatic/aromatic interactions between facing phenylalanine residues have been probed in antiparallel β-sheets, while aromatic/proline interactions have been examined using cyclic peptide disulfides that occur in the venom of marine cone snails. Novel intramolecular hydrogen bonded structures in hybrid peptides containing backbone homologated residues, specifically γ-amino acids, are also described. Chapter 1 provides a brief background to the principles involved in the design of antiparallel β-sheet structures and an introduction to previous studies on aromatic/aromatic and aromatic/proline interactions in influencing peptide conformations. A summary of the NMR methods used is also presented. Chapter 2 discusses the structural characterisation of a designed 14 residue, three stranded β-sheet peptide, Boc-LFVDP-PLFVADP-PLFV-OMe (LFV14). The results described in this Chapter support the presence of multiple conformational states about the χ1 (Cα-Cβ) torsional degree of freedom for the interacting aromatic pairs in solution. Chapter 3 presents the structural characterisation of a designed 19 residue three stranded hybrid β-sheet peptide, Boc-LVβFVDPGLβFVVLDPGLVLβFVV-OMe (BBH19). β-amino acid residues (β-phenylalanine, βPhe) were incorporated at facing positions on antiparallel β-sheets. The BBH19 structure provides an example of interaction between the N and C-terminal strands in a three stranded structure with an α/β hybrid backbone. Chapter 4 focuses on studies of the conformations of the contryphan In936 (GCVDLYPWC*) from Conus inscriptus and the related peptide Lo959 (GCPDWDPWC*) from Conus loroissi. Both peptides possess a macrocyclic 23 membered ring, with multiple accessible conformational states. Chapter 5 describes conformational analysis of a novel 20 membered cyclic peptide disulfide, CIWPWC (Vi804), from Conus virgo. NMR structures were calculated for Vi804 and an analog peptide, CIDWPWC, DW3-Vi804. Chapter 6 explores the solution conformation of hybrid sequences containing α and γ residues. Oligopeptides of the type (αγ)n and (αγγ)n have been studied in solution by NMR methods. Chapter 7 provides a summary of the results described in this thesis and highlights the major conclusions.