This diploma thesis deals with the control calculation of fluid biomass boilers with circulating fluidized bed. The introduction briefly introduced fluidized bed boilers and explained what biomass is. Furthermore there is a stoichiometric calculation of combustion. The calculation of the losses and the efficiency of the boiler is following. Desulphurization is calculated briefly. The main part is devoted to the design and calculation of individual heat exchanging surfaces: superheater P1, superheaters 2 and 3, the wall superheater, the return chamber, hanging tubes, economizer and air heater. At the end is calculated total tolerance boiler. Work is completed with a diagram of temperature of working media and combustion.

The work deals with the constructional and calculation design of the boiler for burning wood and combustion coal in scale (30/70-coal), in load 50 t/h, parameters of steam output p=7,5 MPa, t=480 °C and a temperature of feed water 105 °C. It is a boiler with natural water circulation by evaporation surfaces. In proposal first steichiometric calculations and enthalpic calculations of air and flue gas are performed. Then it is calculated heat balance, the boiler losses and the thermal efficiency is determined. After designing the combustion chamber and dimensions of pulls are determined. In last chapter the overall energy balance are checked. Drawing documentation of steam boiler is a part of the work.

The thesis includes postprocessing the design documentation of construction part new private elementary school in Beroun. It is a building project with the purpose of teaching in English. The building is two-storey, brick with a flat roof. Wall structural system. There is 1st elementary schools, kitchen with dining room and 2nd elementary School in the building. The documentation contains project of boiler room.

This diploma thesis solves design of heating in a residental building. This work is focused on the selection of appropriate one of the two options a heat source, which are cascade heat pumps ground-water and gas condensing boilers. The theoretical part of the diploma thesis deals with introducing to the issue of heat pump systems. The functional principle of the widely most used types and particularized type ground-water. In the practical part calculation and design of heating system with selected heating source that is cascade of gas condensing boilers.

The thesis includes design of steam boiler burning woodchips with parameters of steam 88 t/h, 9,6 MPa, 520 °C. For these parameters is processed a heat calculation and dimensional design of boiler.

Aim of this thesis is to design a technology of a flue gas desulphurization of fluidized bed boiler. Currently, the state of technology is not able to provide flue gas desulphurisation to required level. For this reason it is necessary to build additional device for the desulphurisation. Theoretical part of the thesis deals with the emission limits of sulphur dioxide, available methods of desulphurization and sorbents suitable for the desulfurization. In practical part conditioned dry sorption method is chosen for the specified source, technological and structural design for suggested desulphurization technology including design of all device is proposed. The thesis also includes a technology design and a 3D model.

The aim of a diploma thesis is design of draft boiler for co-firing blast furnace gas and natural gas. In the first part is made the stoichiometric calculation for the gas mixture. Next is the proposal of combustion chamber and proposal of individual heating surfaces of boiler. Next part contains the thermal calculation and control of individual heating surfaces. Part of the work is also drawing documentation of boiler.

This diploma thesis deals with practical design of heat supply of real house in Libhošť, Nový Jičín. Main strategy of heat supply is gas condensation boiler, that replaces current gas boiler, with solar collector. From known house heat loss we determine temperatures of heating water and power of boiler, that heats the house and hot water. System with solar collector is designed to heat hot water in the house. All necessary equations are calculated both for long term measured meteorological data and for data in year 2015. Heat gains and payback periods of investment in solar system are determined from them. Payback periods are calculated given to price of heat that gas boiler produces. Equations and payback period evaluation are made for systems with one to four solar collectors. There is recommendation at the end of thesis, whether the solar system is advantageous, or not.

The thesis is focused on the design of the new heat source of the existing building. The first part deals with the heat sources and fuels used in the Czech Republic. The second part includes design of three variants of heat sources: gas boilers, cogeneration unit with the electric boilers and cogeneration unit with gas boilers. The individual variations are also evaluated in terms of user comfort, space requirements or economy of operation. The third part includes measurement and evaluation of internal environment of the dining hall.

The point of the thesis was to design a heating system for new residential building, situated in Nový Lískovec, Brno. As a source of heat has been designed condensing boiler fueled by gas that meets the need for heating of heating system and hot water. All of the equipment will be located in a utility room on the ground floor. In the apartment have been designed decorative panel radiators.