Modern turbomachines are designed towards thinner, lighter and highly loaded blades. This gives rise to increased sensitivity to flow induced vibrations such as flutter, which leads to structure failure in a short period of time if not sufficiently damped. Although numerical tools are more and more reliable, flutter prediction still depends on a large degree on simplified models. In addition, the critical nature of flutter, resulting in poor well-documented real cases in the open literature, and the lack of experimental database typical of engine flows make its apprehension even more challenging.  In that context, the present thesis is dedicated to study flutter in recent turbines through aerodynamic analysis of subsonic or supersonic flows in response to a prescribed vibratory mode of the structure. The objective is to highlight some mechanisms potentially responsible for flutter in order to be in better position when designing blades. The strategy consists in leading both experimental and numerical investigations.  The experimental part is based on a worldwide unique annular turbine sector cascade employed for measuring the aeroelastic response by means of the aerodynamic influence coefficient technique. The cascade comprises seven low pressure gas turbine blades one of which can oscillate in a controlled way as a rigid body. Aeroelastic responses are measured at various mechanical and aerodynamic parameters: pure and combined modeshapes, reduced frequency, Mach number, incidence angle. In addition to turbulence level measurements, the database aims at assessing the influence of these parameters on the aerodynamic damping, at validating the linear combination principle and at providing input for numerical tools. The numerical part is based on unsteady computations linearized in the frequency domain and performed in the traveling wave mode. The focus is put on two industrial space turbines: 2D computations are performed on an integrally bladed disk, also called blisk; its very low viscous material damping results in complex motions with combined modes and extremely high reduced frequency. The blisk operates at low subsonic conditions without strong non-linearities. Although the blades have been predicted aeroelastically stable, an original methodology based on elementary decompositions of the blade motion is presented to identify the destabilizing movements. The results suggest that the so-called classical flutter is surprisingly prone to occur. Moreover, the aerodynamic damping has been found extremely sensitive to the interblade phase angle and cut-on/cut-off conditions. 3D computations are then performed on a supersonic turbine, which features shock waves and boundary layer separation. In contrast, the blade motion is of elementary nature, i.e. purely axial. The blades have been predicted aeroelastically unstable for backward traveling waves and stable for forward traveling waves. The low reduced frequencies allow quasi-steady analysis, which still account for flutter mechanisms: the shock wave motion establishes the boundary between stable and unstable configurations. / <p>QC 20111209</p>

New materials and new fabrication techniques in turbomachinery lead to monolithic<p>structures with extremely low damping which may be responsible for severe vibrations<p>and possible high-cycle fatigue problems. To solve this, various techniques<p>of damping enhancement are under investigation. The present work is focused on<p>piezoelectric shunt damping.<p>This thesis considers the RL shunt damping of rotationally periodic structures using<p>an array of piezoelectric patches, with an application to a bladed drum representative<p>of those used in turbomachinery. Due to the periodicity and the cyclic symmetry of<p>the structure, the blade modes occur by families with very close resonance frequencies,<p>and harmonic shape in the circumferential direction; the proposed RL shunt<p>approaches take advantage of these two features.<p>When a family of modes is targeted for damping, the piezoelectric patches are<p>shunted independently on identical RL circuits, and tuned roughly on the average<p>value of the resonance frequencies of the targeted modes. This independent<p>configuration offers a damping solution effective on the whole family of modes, but<p>it requires the use of synthetic inductors, which is a serious drawback for rotating<p>machines.<p>When a specific mode with n nodal diameters has been identified as critical and<p>is targeted for damping, one can take advantage of its harmonic shape to organize<p>the piezoelectric patches in two parallel loops. This parallel approach reduces considerably<p>the demand on the inductors of the tuned inductive shunt, as compared<p>to independent loops, and offers a practical solution for a fully passive integration<p>of the inductive shunt in a rotating structure.<p>Various methods are investigated numerically and experimentally on a cantilever<p>beam, a bladed rail, a circular plate, and a bladed drum. The influence of blade<p>mistuning is also investigated. / Doctorat en Sciences de l'ingénieur / info:eu-repo/semantics/nonPublished

No description available.

No description available.

Les aubes des turbomachines modernes sont de plus en plus fines, légères et chargées aérodynamiquement. Cette tendance accroît l'apparition de phénomènes aéroélastiques tel que le flottement qui conduit à la rupture si l'amortissement est insuffisant. Bien que les outils numériques soient de plus en plus robustes, la fiabilité de sa prédiction demeure insuffisante. La nature critique du phénomène et le manque de données expérimentales pour des écoulements typiques de l'industrie encouragent des travaux de recherche. Dans ce contexte, la présente thèse est dédiée à l'étude du flottement dans des configurations récentes de turbine à travers l'analyse aérodynamique des écoulements subsoniques ou supersoniques soumis à un mode de structure vibratoire imposé. L'objectif est de fournir des éléments de compréhension des mécanismes potentiellement générateurs de flottement pour une meilleure intégration lors de la conception des aubes. L’approche consiste à mener des travaux expérimentaux et numériques. La partie expérimentale s'appuie sur un secteur de grille annulaire constitué de sept aubes dont une peut osciller de manière contrôlée. Les fluctuations de pressions instationnaires générées sont mesurées avec la technique dite des coefficients d'influence pour différents paramètres mécaniques et aérodynamiques : déformées modales pures et combinées, fréquence réduite, nombre de Mach, angle d'incidence. Complétée par des mesures de niveau de turbulence, la base de données vise à évaluer l'influence de ces paramètres sur la réponse aéroélastique, à valider le principe de superposition linéaire et à soutenir les codes numériques. La partie numérique se base sur des calculs instationnaires linéarisés dans le domaine fréquentiel en utilisant la technique dite des "ondes propagatives" (traveling wave mode).Deux cas de turbines spatiales industrielles sont étudiés.• Des calculs 2D sont réalisés sur une turbine monobloc ou blisk. L'amortissement mécanique quasi-nul entraîne des déformées complexes avec couplage de modes et des fréquences réduites très élevées. Bien que les aubes soient prédites stables, une méthodologie basée sur des décompositions géométriques élémentaires est présentée afin d'identifier les contributions déstabilisantes. Les résultats aboutissent étonnamment aux conclusions de la théorie du flottement classique : la torsion est une source potentielle d'instabilité. De plus, le coefficient d'amortissement aérodynamique a été trouvé extrêmement sensible au déphasage interaube et aux fréquences de coupure (modes cut-on/cut-off).• Des calculs 3D sont ensuite réalisés sur une turbine supersonique. L'écoulement présente des ondes de chocs avec décollement de la couche limite et le mouvement de l'aube est de nature élémentaire, i.e. purement axial. Les aubes ont été prédites instables pour les modes rétrogrades et stables pour les modes propagatifs. En dépit des fortes hypothèses, des analyses quasi-stationnaires rendent compte des mécanismes de flottement : la phase entre le mouvement du choc et l'excitation établit la frontière entre configurations stable et instable. / Modern turbomachines are designed towards thinner, lighter and highly loaded blades. This gives rise to increased sensitivity to flow induced vibrations such as flutter, which leads to structure failure in a short period of time if not sufficiently damped. Although numerical tools are more and more reliable, flutter prediction still depends on a large degree on simplified models. In addition, the critical nature of flutter, resulting in poor welldocumented real cases in the open literature, and the lack of experimental database typical of engine flows make its apprehension even more challenging. In that context, the present thesis is dedicated to study flutter in recent turbines through aerodynamic analysis of subsonic or supersonic flows in response to a prescribed vibratory mode of the structure. The objective is to highlight some mechanisms potentially responsible for flutter in order to be in better position when designing blades. The strategy consists in leading both experimental and numerical investigations. The experimental part is based on a worldwide unique annular turbine sector cascade employed for measuring the aeroelastic response by means of the aerodynamic influence coefficient technique. The cascade comprises seven low pressure gas turbine blades one of which can oscillate in a controlled way as a rigid body. Aeroelastic responses are measured at various mechanical and aerodynamic parameters: pure and combined modeshapes, reduced frequency, Mach number, incidence angle. In addition to turbulence level measurements, the database aims at assessing the influence of these parameters on the aerodynamic damping, at validating the linear combination principle and at providing input for numerical tools. The numerical part is based on unsteady computations linearized in the frequency domain and performed in the traveling wave mode. The focus is put on two industrial space turbines: 2D computations are performed on an integrally bladed disk, also called blisk; its very low viscous material damping results in complex motions with combined modes and extremely high reduced frequency. The blisk operates at low subsonic conditions without strong non-linearities. Although the blades have been predicted aeroelastically stable, an original methodology based on elementary decompositions of the blade motion is presented to identify the destabilizing movements. The results suggest that the so-called classical flutter is surprisingly prone to occur. Moreover, the aerodynamic damping has been found extremely sensitive to the interblade phase angle and cut-on/cut-off conditions.• 3D computations are then performed on a supersonic turbine, which features shockwaves and boundary layer separation. In contrast, the blade motion is of elementary nature, i.e. purely axial. The blades have been predicted aeroelastically unstable for backward traveling waves and stable for forward traveling waves. The low reduced frequencies allow quasi-steady analysis, which still account for flutter mechanisms: the shock wave motion establishes the boundary between stable and unstable configurations.

Modern turbomachines are designed towards thinner, lighter and highly loaded blades. This gives rise to increased sensitivity to flow induced vibrations such as flutter, which leads to structure failure in a short period of time if not sufficiently damped. Although numerical tools are more and more reliable, flutter prediction still depends on a large degree on simplified models. In addition, the critical nature of flutter, resulting in poor welldocumented real cases in the open literature, and the lack of experimental database typical of engine flows make its apprehension even more challenging. In that context, the present thesis is dedicated to study flutter in recent turbines through aerodynamic analysis of subsonic or supersonic flows in response to a prescribed vibratory mode of the structure. The objective is to highlight some mechanisms potentially responsible for flutter in order to be in better position when designing blades. The strategy consists in leading both experimental and numerical investigations. The experimental part is based on a worldwide unique annular turbine sector cascade employed for measuring the aeroelastic response by means of the aerodynamic influence coefficient technique. The cascade comprises seven low pressure gas turbine blades one of which can oscillate in a controlled way as a rigid body. Aeroelastic responses are measured at various mechanical and aerodynamic parameters: pure and combined modeshapes, reduced frequency, Mach number, incidence angle. In addition to turbulence level measurements, the database aims at assessing the influence of these parameters on the aerodynamic damping, at validating the linear combination principle and at providing input for numerical tools. The numerical part is based on unsteady computations linearized in the frequency domain and performed in the traveling wave mode. The focus is put on two industrial space turbines: 2D computations are performed on an integrally bladed disk, also called blisk; its very low viscous material damping results in complex motions with combined modes and extremely high reduced frequency. The blisk operates at low subsonic conditions without strong non-linearities. Although the blades have been predicted aeroelastically stable, an original methodology based on elementary decompositions of the blade motion is presented to identify the destabilizing movements. The results suggest that the so-called classical flutter is surprisingly prone to occur. Moreover, the aerodynamic damping has been found extremely sensitive to the interblade phase angle and cut-on/cut-off conditions.* 3D computations are then performed on a supersonic turbine, which features shockwaves and boundary layer separation. In contrast, the blade motion is of elementary nature, i.e. purely axial. The blades have been predicted aeroelastically unstable for backward traveling waves and stable for forward traveling waves. The low reduced frequencies allow quasi-steady analysis, which still account for flutter mechanisms: the shock wave motion establishes the boundary between stable and unstable configurations.

No description available.