New materials and new fabrication techniques in turbomachinery lead to monolithic<p>structures with extremely low damping which may be responsible for severe vibrations<p>and possible high-cycle fatigue problems. To solve this, various techniques<p>of damping enhancement are under investigation. The present work is focused on<p>piezoelectric shunt damping.<p>This thesis considers the RL shunt damping of rotationally periodic structures using<p>an array of piezoelectric patches, with an application to a bladed drum representative<p>of those used in turbomachinery. Due to the periodicity and the cyclic symmetry of<p>the structure, the blade modes occur by families with very close resonance frequencies,<p>and harmonic shape in the circumferential direction; the proposed RL shunt<p>approaches take advantage of these two features.<p>When a family of modes is targeted for damping, the piezoelectric patches are<p>shunted independently on identical RL circuits, and tuned roughly on the average<p>value of the resonance frequencies of the targeted modes. This independent<p>configuration offers a damping solution effective on the whole family of modes, but<p>it requires the use of synthetic inductors, which is a serious drawback for rotating<p>machines.<p>When a specific mode with n nodal diameters has been identified as critical and<p>is targeted for damping, one can take advantage of its harmonic shape to organize<p>the piezoelectric patches in two parallel loops. This parallel approach reduces considerably<p>the demand on the inductors of the tuned inductive shunt, as compared<p>to independent loops, and offers a practical solution for a fully passive integration<p>of the inductive shunt in a rotating structure.<p>Various methods are investigated numerically and experimentally on a cantilever<p>beam, a bladed rail, a circular plate, and a bladed drum. The influence of blade<p>mistuning is also investigated. / Doctorat en Sciences de l'ingénieur / info:eu-repo/semantics/nonPublished

The aim of the thesis is to propose active damping as a potential control strategy for chatter instability in machine tools.<p>The regenerative process theory explains chatter as a closed loop interaction between the structural dynamics and the cutting process. This is considered to be the most dominant reason behind machine tool chatter although other instability causing mechanisms exist.<p>The stability lobe diagram provides a quantitative idea of the limits of stable machining in terms of two physical parameters: the width of contact between tool and the workpiece, called the width of cut and the speed of rotation of the spindle. It is found that the minimum value of the stability limit is proportional to the structural damping ratio for turning operations. This important finding provides the motivation of influencing the structural dynamics by active damping to enhance stability limits of a machining operation.<p>A direct implementation of active damping in an industrial environment may be difficult. So an intermediate step of testing the strategy in a laboratory setup, without conducting real cutting is proposed. Two mechatronic "Hardware in the Loop" simulators for chatter in turning and milling are presented, which simulate regenerative chatter experimentally without conducting real cutting tests. A simple cantilever beam, representing the MDOF dynamics of<p>the machine tool structure constitutes the basic hardware part and the cutting process is simulated in real time on a DSP board. The values of the cutting parameters such as spindle speed and the axial width of cut can be changed on the DSP board and the closed loop interaction between the structure and the cutting process can be led to instability.<p><p>The demonstrators are then used as test beds to investigate the efficiency of active damping, as a potential chatter stabilization strategy. Active damping is easy to implement, robust and does not require a very detailed model of the structure for proper functioning, provided a collocated sensor and actuator configuration is followed. The idea of active damping is currently being implemented in the industry in various metal cutting machines as part of the European Union funded SMARTOOL project (www.smartool.org), intended to propose smart chatter control technologies in machining operations. / Doctorat en sciences appliquées / info:eu-repo/semantics/nonPublished

The scope of this research concerns the passive damping of structural vibrations by the use of viscoelastic layers. It is motivated by the need for efficient numerical tools to deal with the medium frequency behaviour of industrial viscoelastic sandwich products. The sandwich modelling technique is based on the use of an interface element: the two deformable plates are modelled by special plate elements while the intermediate dissipative layer is modelled with interface elements. This interface element is based on the first-order shear deformation theory and assume constant peel and shear stresses in the polymer thickness. This element couples the lower and upper layers without additional degrees of freedom. The partition of unity finite element method (PUFEM) is applied to the development of enriched Mindlin plate elements. The element shape functions are obtained as the product of<p>partition of unity functions with arbitrary chosen enrichment functions. Polynomial enrichment leads to the generation of high-order polynomial shape functions and is therefore similar to a p-FEM technique. Numerical examples illustrate the use of both PUFEM Mindlin plate elements and interface elements for the simulation of viscoelastic sandwich structures. / Doctorat en sciences appliquées / info:eu-repo/semantics/nonPublished

<p align="justify">Many different active control techniques can be used to control the vibrations of a mechanical structure: they however require at least a sensitive signal amplifier (for the sensor), a power amplifier (for the actuator) and an analog or digital filter (for the controller). The use of all these electronic devices may be impractical in many applications and has motivated the use of the so-called shunt circuits, in which an electrical circuit is directly connected to a transducer embedded in the structure. The transducer acts as an energy converter: it transforms mechanical (vibrational) energy into electrical energy, which is in turn dissipated in the shunt circuit. No separate sensor is required, and only one, generally simple electronic circuit is used. The stability of the shunted structure is guaranteed if the electric circuit is passive, i.e. if it is made of passive components such as resistors and inductors.</p><p><p><p align="justify">This thesis compares the performances of the electric shunt circuits with those of classical active control systems. It successively considers the use of piezoelectric transducers and that of electromagnetic (moving-coil) transducers.</p><p><p><p align="justify">In a first part, the different damping techniques are applied on a benchmark truss structure equipped with a piezoelectric stack transducer. A unified formulation is found and experimentally verified for an active control law, the Integral Force Feedback (IFF), and for various passive shunt circuits (resistive and resistive-inductive). The use of an active shunt, namely the negative capacitance, is also investigated in detail. Two different implementations are discussed: they are shown to have very different stability limits and performances.</p><p><p><p align="justify">In a second part, vibration isolation with electromagnetic (moving-coil) transducers is introduced. The effects of an inductive-resistive shunt circuit are studied in detail; an equivalent mechanical representation is found. The performances are compared with that of resonant shunts and with that of active isolation with IFF. Next, the construction of a six-axis isolator based on a Stewart Platform is presented: the key parameters and the main limitations of the system are highlighted.</p> / Doctorat en Sciences de l'ingénieur / info:eu-repo/semantics/nonPublished

Cette thèse s'inscrit dans la continuation du travail de Younes Achkire, consacré au contrôle actif des ponts haubanés. Elle traite de l'implémentation d'un système de contrôle actif sur des maquettes de structures câblées. Deux types de structures sont étudiés expérimentalement: les ponts haubanés et les treillis spatiaux. Après une brève introduction sur l'usage du contrôle actif dans ces domaines, le chapitre 2 traite numériquement des mécanismes d'interaction entre le câble et la structure. Au chapitre 3, nous présentons la stratégie de contrôle que nous utilisons pour stabiliser une structure câblée: il s'agit d'un contrôle décentralisé, basé sur des paires capteur/actionneur colocalisées, placées au niveau des ancrages des câbles, chacune équipée d'un contrôleur Intégral Force Feedback. Nous présentons une théorie linéaire simplifiée permettant de dimensionner le système et de prévoir son efficacité. Elle est illustrée sur un exemple, et nous discutons de la validité de certaines hypothèses simplificatrices. Le chapitre 4 est consacré au contrôle actif des ponts haubanés. Nous y présentons 2 maquettes. La première, de petite taille (3m) représente un pylône de pont haubané en construction. Elle est équipée d'actionneurs piézoélectriques. La seconde, installée au Centre Commun de Recherche d'Ispra (Italie), mesure 30m de long, et est équipée d'actionneurs hydrauliques. Les expériences réalisées sur ces maquettes ont démontré l'efficacité du contrôle et la fiabilité de la théorie prédictive. Le contrôle du flottement des ponts est traité sur un exemple numérique. Le chapitre 5 relate nos expériences d'amortissement actif des treillis spatiaux. Deux structures ont été étudiées: une colonne en treillis équipée de 3 câbles actifs, et une structure triédrique suspendue à des cordons élastiques pour simuler l'absence de gravité, également munie de câbles actifs. Deux concepts d'actionneur piézoélectrique ont été testés. Nous avons ensuite examiné le problème de la saturation des actionneurs, et celui du contrôle actif des microvibrations (~10nm) d'une structure câblée. Le chapitre 6 conclut ce travail, en souligne les aspects originaux et donne quelques perspectives de développement. / Doctorat en sciences appliquées / info:eu-repo/semantics/nonPublished

In this work, we investigate the active vibration isolation and damping of sensitive equipment. Several single-axis isolation techniques are analyzed and tested. A comparison between the sky-hook damper, integral force feedback, inertial velocity feedback and LagLead control techniques is conducted using several practical examples.<p><p>The study of single-axis systems has been developed and used to build a six-axis isolator. A six degrees of freedom active isolator based on Stewart platform has been designed manufactured and tested for the purpose of active vibration isolation of sensitive payloads in space applications. This six-axis hexapod is designed according to the cubic configuration; it consists of two triangular parallel plates connected to each other by six active legs orthogonal to each other; each leg consists of a voice coil actuator, a force sensor and two flexible joints. Two different control techniques have been tested to control this isolator :integral force feedback and Lag-Lead compensator, the two techniques are based on force feedback and are applied in a decentralized manner. A micro-gravity parabolic flight test has been clone to test the isolator in micro-gravity environment.<p><p>ln the context of this research, another hexapod has been produced ;a generic active damping and precision painting interface based on Stewart platform. This hexapod consists of two parallel plates connected to each other by six active legs configured according to the cubic architecture. Each leg consists of an amplified piezoelectric actuator, a force sensor and two flexible joints. This Stewart platform is addressed to space applications where it aims at controlling the vibrations of space structures while connecting them rigidly. The control technique used here is the decentralized integral force feedback.<p><p> / Doctorat en sciences appliquées / info:eu-repo/semantics/nonPublished