Broadband Wireless Access Systems (BWASs) such as High Speed Downlink Packet Access (HSDPA) and the Worldwide Interoperability for Microwave Access (WiMAX), pose a myriad of new opportunities for leveraging the support of a wide range of “content-rich” mobile multimedia services with diverse Quality of Service (QoS) requirements. This is due to the remarkably high bandwidth that is supported by these systems, which was previously only available to wireline connections. Despite the support for such high bandwidth, satisfying the diverse QoS of users while maximizing the revenues of network operators is still one of the major issues in these systems. Bandwidth management, therefore, will play a decisive role in the success of such wireless access systems. Without efficient bandwidth management, network operators may not be able to meet the growing demand of users for multimedia services, and may consequently suffer great revenue loss. Bandwidth management in BWASs is, however, a challenging problem due to many issues that need to be taken into consideration. Examples of such issues include the diverse QoS requirements of the services that BWASs support, the varying channel quality conditions of mobile users, and hence the varying amount of resources that are needed to guarantee certain QoS levels during the lifetime of user connections, the utilization of shared channels for data delivery instead of dedicated ones and network congestion. In this thesis, we address the problem of bandwidth management in BWASs and propose efficient economic-based solutions in order to deal with these issues at different bandwidth management levels, and hence enhance the QoS support in these systems. Specifically, we propose a bandwidth management framework for BWASs. The framework is designed to support multiple classes of traffic with different users having different QoS requirements, maximize the throughput of BWASs, support inter- and intra-class fairness, prevent network congestion and maximize the network operator’s revenues. The framework consists of three related components, namely packet scheduling, bandwidth provisioning and Call Admission Control-based dynamic pricing. By efficiently managing the wireless bandwidth prior to users’ admission (i.e.,pre-admission bandwidth management) and during the users’ connections (i.e., post-admission bandwidth management), these schemes are shown to achieve the design goals of our framework. / Thesis (Ph.D, Computing) -- Queen's University, 2009-04-01 15:35:36.213

Digital technology, network compression technology and Internet technology universal utilization, causes the communication market inherent in the increasingly blurred boundaries and a convergence of the phenomenon. Under this background, the industry unceasingly promotes the service more and more, or provides triple play (voice, data and video service) to change the industrial competition situation. This research union "Grounded Theory" and "Importance-Performance Analysis " to Taiwan's telecommunications market to explore the theme through telecommunications technology and innovation as the main shaft, supported by the world's major countries in Europe, the United States and Japan's market performance. An analysis of the trends of digital convergence, policies and the evolution of the telecommunications industry. The research results are as follows: 1. The government unit: Will grasp the future industry tendency to develop the appropriate regulation system from the recent communication industrial structure by the industrial change. 2. The communications industry: To develop digital convergence in the competition strategy by factors on telecommunication environment, market analysis, technical development situation and government policy.

With the exploding increase of mobile users and the release of new wireless applications, the high bandwidth requirement has been taking as a main concern for the design and development of the wireless techniques. There is no doubt that broadband wireless access with the support of heterogeneous kinds of applications is the trend in the next generation wireless networks. As a promising broadband wireless access standard, IEEE 802.16 has attracted extensive attentions from both industry and academia due to its high data rate and the inherent media access control (MAC) mechanism, which takes the service differentiation and quality of service (QoS) provisioning into account. To achieve service differentiation and QoS satisfaction for heterogenous applications is a very complicated issue. It refers to many fields, such as connection admission control (CAC), congestion control, routing algorithm, MAC protocol, and scheduling scheme. Among these fields, packet scheduling plays one of the most important roles in fulfilling service differentiation and QoS provisioning. It decides the order of packet transmissions, and provides mechanisms for the resource allocation and multiplexing at the packet level to ensure that different types of applications meet their service requirements and the network maintains a high resource utilization. In this thesis, we focus on the packet scheduling for difficult types of services in IEEE 802.16 networks, where unicast and mulitcast scheduling are investigated. For unicast scheduling, two types of services are considered: non-real-time polling service (nrtPS) and best effort (BE) service. We propose a flexible and efficient resource allocation and scheduling framework for nrtPS applications to achieve a tradeoff between the delivery delay and resource utilization, where automatic repeat request (ARQ) mechanisms and the adaptive modulation and coding (AMC) technique are jointly considered. For BE service, considering the heterogeneity of subscriber stations (SSs) in IEEE 802.16 networks, we propose the weighted proportional fairness scheduling scheme to achieve the flexible scheduling and resource allocation among SSs based on their traffic demands/patterns. For multicast scheduling, a cooperative multicast scheduling is proposed to achieve high throughput and reliable transmission. By using the two-phase transmission model to exploit the spatial diversity gain in the multicast scenario, the proposed scheduling scheme can significantly improve the throughput not only for all multicast groups, but also for each group member. Analytical models are developed to investigate the performance of the proposed schemes in terms of some important performance measurements, such as throughput, resource utilization, and service probability. Extensive simulations are conducted to illustrate the efficient of the proposed schemes and the accuracy of the analytical models. The research work should provide meaningful guidelines for the system design and the selection of operational parameters, such as the number of TV channels supported by the network, the achieved video quality of each SS in the network, and the setting of weights for SSs under different BE traffic demands.

With the exploding increase of mobile users and the release of new wireless applications, the high bandwidth requirement has been taking as a main concern for the design and development of the wireless techniques. There is no doubt that broadband wireless access with the support of heterogeneous kinds of applications is the trend in the next generation wireless networks. As a promising broadband wireless access standard, IEEE 802.16 has attracted extensive attentions from both industry and academia due to its high data rate and the inherent media access control (MAC) mechanism, which takes the service differentiation and quality of service (QoS) provisioning into account. To achieve service differentiation and QoS satisfaction for heterogenous applications is a very complicated issue. It refers to many fields, such as connection admission control (CAC), congestion control, routing algorithm, MAC protocol, and scheduling scheme. Among these fields, packet scheduling plays one of the most important roles in fulfilling service differentiation and QoS provisioning. It decides the order of packet transmissions, and provides mechanisms for the resource allocation and multiplexing at the packet level to ensure that different types of applications meet their service requirements and the network maintains a high resource utilization. In this thesis, we focus on the packet scheduling for difficult types of services in IEEE 802.16 networks, where unicast and mulitcast scheduling are investigated. For unicast scheduling, two types of services are considered: non-real-time polling service (nrtPS) and best effort (BE) service. We propose a flexible and efficient resource allocation and scheduling framework for nrtPS applications to achieve a tradeoff between the delivery delay and resource utilization, where automatic repeat request (ARQ) mechanisms and the adaptive modulation and coding (AMC) technique are jointly considered. For BE service, considering the heterogeneity of subscriber stations (SSs) in IEEE 802.16 networks, we propose the weighted proportional fairness scheduling scheme to achieve the flexible scheduling and resource allocation among SSs based on their traffic demands/patterns. For multicast scheduling, a cooperative multicast scheduling is proposed to achieve high throughput and reliable transmission. By using the two-phase transmission model to exploit the spatial diversity gain in the multicast scenario, the proposed scheduling scheme can significantly improve the throughput not only for all multicast groups, but also for each group member. Analytical models are developed to investigate the performance of the proposed schemes in terms of some important performance measurements, such as throughput, resource utilization, and service probability. Extensive simulations are conducted to illustrate the efficient of the proposed schemes and the accuracy of the analytical models. The research work should provide meaningful guidelines for the system design and the selection of operational parameters, such as the number of TV channels supported by the network, the achieved video quality of each SS in the network, and the setting of weights for SSs under different BE traffic demands.

This thesis analyzes the Bit Error Rate (BER) performance of Orthogonal Frequency Division Multiplexing (OFDM) systems in mobile multi-hop relaying channels. We consider the uplink scenario and quantify the effects of mobile channel impairments such as Doppler Shift due to user mobility per hop, high-power amplifier distortions when amplifying the transmitted/relayed OFDM symbol per hop, as well as the cumulative effects of these impairments over multi-hop relaying channels. It is shown that the resulting inter-carrier interference (ICI) due to the cumulative effects of the phase noise generated by these impairments per hop becomes very significant in a multi-hop relaying communication system, and severely degrades the BER performance of the system. Simulation results agree well with, and validate the analysis. / Thesis (Ph.D, Electrical & Computer Engineering) -- Queen's University, 2011-05-05 15:15:39.576

First-generation, line-of-sight (LOS) fixed broadband wireless access techniques have been around for several years. However, services based on this technology have been limited in scope to service areas where transceivers can communicate with their base stations, unimpeded by trees, buildings and other obstructions. This limitation has serious consequences in that the system can deliver only 50% to 70% coverage within a given cell radius, thus affecting earned revenue. Next generation broadband fixed wireless access techniques are aimed at achieving a coverage area greater than 90%. To achieve this target, these techniques must be based on a point-to-multipoint (PMP) cellular architecture with low base station antennas, thus possessing the ability to operate in true non-line-of-sight (NLOS) conditions. A possible limiting factor for these systems is link degradation due to interference. This thesis presents a new model to estimate the levels of co-channel interference for such systems operating within the 3.5 GHz multichannel multipoint distribution service (MMDS) band. The model is site-specific in that it uses statistical building/roof height distribution parameters obtained from practically modeling several metropolitan cities in the U.S. using geographic information system (GIS) tools. This helps to obtain a realistic estimate and helps analyze the tradeoff between cell radius and modulation complexity. Together, these allow the system designer to decide on an optimal location for placement of customer premises equipment (CPE) within a given cell area. / Master of Science

近年來科技匯流發展日行千里，新興無線寬頻的接取技術（Broadband Wireless Access）不斷升級，為民眾的生活帶來更便利的創新應用，而寬頻接取服務的亦由以往一種技術提供一種服務的方式，逐漸轉換為涵蓋數據（Data）、語音（Voice）及影音內容（Video）等三種服務的匯流。加速了電信、廣電與網路通訊產業升級的需求，也帶來了新的市場動能與發展契機。 本研究以台灣為研究範本，以個案研究方法來探討在網路為基礎的數位匯流環境下數位生活之發展趨勢、個案公司科技產品未來的發展趨勢及因應策略。 而本研究發現未來家用閘道器產品市場，將會朝向整合家中所有可上網設備的整合性產品特性發展。亦將會是國內網通設備商值得切入的新領域。娛樂型家用閘道器，目前市場上多以機上盒(Set top box, STB)加上Router的功能型態出現，惟必須等待STB零售市場打開後，國內的廠商將會有機會創造更大利潤空間。而個案公司在研發方向應以Cable Docsis的核心技術為中心,從水平方向擴展至家庭網路的Home applications。追求更快的速度,更多元化的網路技術和更方便的寬頻服務。在縱向方面,我們則以完整的解決方案為主軸,往頭端CMTS技術和網管為發展重點。

Fixed Broadband Wireless Access (FBWA) is a technology aimed at providing high-speed wireless Internet access, over a wide area, from devices such as personal computers and laptops. FBWA channels are defined in the range of 1-20 MHz which makes the RF front end (RFE) design extremely challenging. In its pursuit to standardize the Broadband Wireless Access (BWA) technologies, IEEE working group 802.16 for Broadband Wireless Access has released the fixed BWA standard IEEE 802.16 – 2004 in 2004. This standard is further backed by a consortium, of leading wireless vendors, chip manufacturers and service providers, officially known as Wireless Interoperability for Microwave Access (WiMAX). In general, any wireless base station (BS), supporting a number of contiguous Frequency Division Multiplexed (FDM) channels has to incorporate an RF front end (RFE) for each RF channel. The precise job of the RFE is to filter the desired channel from a group of RF channels, digitize it and present it to the subsequent baseband system at the proper sampling rate. The system essentially has a bandpass filter (BPF) tuned to the channel of interest followed by a multiplier which brings the channel to a suitable intermediate frequency (IF). The IF output is digitized by an ADC and then brought to the baseband by an appropriate digital multiplier. The baseband samples, thus generated, are at the ADC sampling rate which is significantly higher than the target sampling rate, which is defined by the wireless protocol in use. As a result a sampling rate conversion (SRC) is performed on these baseband samples to bring the channel back to the target sampling rate. Since the input sampling rate need not be an integer multiple of the target sampling rate, Fractional SRC (FSRC) is required in most of the cases. Instead of using a separate ADC and IF section for each individual channels, most systems use a common IF section, followed by a wideband ADC, which operates over a wide frequency band containing a group of contiguous FDM channels. In this case a channelizer is employed to digitally extract the individual channels from the digital IF samples. We formally call this system a receiver channelizer. Such an implementation presents considerable challenge in terms of the computational requirement and of course the cost of the BS. The computational complexity further goes up for FBWA system where channel bandwidth is in the order of several MHz. Though such a system has been analyzed for narrow band wireless systems like GSM, to the best of our knowledge no analysis seems to have been carried out for a wideband system such as WiMAX. In this work, we focus on design of a receiver channelizer for WiMAX BS, which can simultaneously extract a group of contiguous FDM RF channels supported by the BS. The main goal is to obtain a simple, low cost channelizer architecture, which can be implemented in an FPGA. There are a number of techniques available in the literature, from Direct Digital Conversion to Polyphase FFT Filter Banks (PFFB), which can do the job of channelization. But each of them operates with certain constraints and, as a result, suits best to a particular application. Further all of these techniques are generic in nature, in the sense that their structure is independent of any particular standard. With regard to computational requirement of these techniques, PFFB is the best, with respect to the number of complex multiplications required for its implementation. But it needs two very stringent conditions to be satisfied, viz. the number of channels to be extracted is equal to the decimation factor and the sampling rate is a power of 2 times baseband bandwidth. Clearly these conditions may not be satisfied by different wireless communication standards, and in fact, this is not satisfied by the WiMAX standard. This gives us the motivation to analyze the receiver channelizer for WiMAX BS and to find an efficient and low cost architecture of the same. We demonstrate that even though the conditions required by PFFB are not satisfied by the WiMAX standard, we can modify the overall architecture to include the PFFB structure. This is achieved by dividing the receiver channelizer into two blocks. The first block uses the PFFB structure to separate the desired number of channels from the input samples. This process also achieves an integer SRC by a factor that is equal to the number of channels being extracted. This block generates baseband outputs whose sampling rates are related to their target sampling rate by a fractional multiplication factor. In order to bring the channels to their target sampling rate, each output from the PFFB block is fed to a FSRC block, whose job is to use an efficient FSRC algorithm to generate the samples at the target sampling rate. We show that the computational complexity, as compared to the direct implementation, is reduced by a factor, which is approximately equal to the square of the number of channels. After mathematically formulating the receiver channelizer for WiMAX BS, we perform the simulation of the system using a software tool. There are two basic motives behind the simulation of the system which has a mathematical model. Firstly, the software simulation will give an idea whether the designed system is physically realizable. Secondly, this will help in designing the logic for different blocks of the system. Once these individual blocks are simulated and tested, they can be smoothly ported onto an FPGA. For simulation purpose, we parameterize the receiver channelizer in such a way that it can be reconfigured for different ADC sampling rates and IF frequencies, by changing the input clock rate. The system is also reconfigurable in terms of the supported channel bandwidth. This is achieved by storing all the filter coefficients pertaining to each channel type, and loading the required coefficients into the computational engine. Using this methodology we simulate the system for three different IF frequencies (and the corresponding ADC sampling rates) and three different channel types, thus leading to nine different system configurations. The simulation results are in agreement with the mathematical model of the system. Further, we also discuss some important implementation issues for the reconfigurable receiver channelizer. We estimate the memory requirement for implementing the system in an FPGA. The implementation delay is estimated in terms of number of samples. The thesis is organized in five chapters. Chapter 1 gives a brief introduction about the WiMAX system and different existing channelization architecture followed by the outline of the proposed receiver channelizer. In chapter 2, we analyze the proposed receiver channelizer for WiMAX BS and evaluate its computational requirements. Chapter 3 outlines the procedure to generate the WiMAX test signal and specification of the all the filters used in the system. It also lists the simulation parameters and records the results of the simulation. Chapter 4 presents the details of a possible FPGA implementation. We present the concluding remarks and future research directions in the final chapter.

Computer networks are in the scope of the IEEE organization normalized by the 802 board which currently comprises six working groups for wireless communications. IEEE 802.11 for wireless local area networks, IEEE  802.15 for wireless personal area networks, IEEE 802.16 for wireless metropolitan area networks, IEEE 802.20 for mobile broadband wireless access, IEEE 802.21 for media independent handover and IEEE 802.22 for wireless regional area networks. This master's thesis focuses on a security analysis of particular standards, describes threats, vulnerabilities, current security measures and mutually compares wireless specifications from a security point of view. The conclusion is devoted to overall evaluation of the project, to its contributions, possible enhancements and continuation in the form of consequential studies.