Boiling is used in a wide variety of industries, including electronics cooling, distillation, and power generation. Fundamental studies on the boiling process are needed for effective implementation. Key performance characteristics of boiling are the heat transfer coefficient, which determines the amount of heat flux that can be dissipated for a given superheat, and critical heat flux(CHF), the failure point that occurs when vapor blankets the surface. The wettability of a surface is one of the key parameters that affects boiling behavior. Wetting surfaces(e.g., hydrophilic surfaces), typically characterized by a static contact angle below 90°,have better critical heat flux due to effective rewetting, but compromised heat transfer coefficients due to increased waiting times between nucleation of each bubble. Meanwhile, nonwetting surfaces (e.g., hydrophobic surfaces), characterized by static contact angles greater than 90°, have better heat transfer coefficients due to improved nucleation characteristic, but reach critical heat flux early due to surface dry out. However, recent studies have shown that the static contact angle alone offers and incomplete, and sometimes inaccurate, description of this behavior, which is instead governed entirely by the dynamic wettability. Specifically, the receding contact angle impacts the size and contact area of bubbles forming on a surface during boiling, while the advancing contact angle determines how the bubble departs. With this more complete set of wettability descriptors, three characteristic wetting regimes define the boiling behavior: hygrophilic surfaces having advancing and receding contact angles both under 90°; hygrophobic surfaces having both these dynamic contact angles over 90°;and ambiphilic surfaces having a receding contact angle less than 90°, but an advancing contact angle greater than 90°.The goal of this thesis is to experimentally characterize and compare the behavior of boiling surfaces in each of these regimes, observe the contact line behavior, and explain the mechanisms for their differences in performance.

The dynamics of hydrogen gas bubbles growing during electrolysis in H 2 SO 4 on a Pt microelectrode are studied in detail by electrochemical, shadowgraphy and PIV methods. The bubble evolution under potentiostatic conditions is presented in terms of electric current, images and radius of the growing bubble, and the velocity profiles. It allowed to resolve the carpet of microbubbles underneath the growing bubble, the transition to a new oscillatory growth regime and a Marangoni convection around the bubble foot. To substantiate the effect of coalescence and of the electrostatic effect on the bubble departure diameter, a salt (sodium sulfate) was added to regulate the pH and the ionic strength of the electrolyte.

<p dir="ltr">Boiling processes have long had an important role in power generation and air conditioning applications. The efficient and reliable heat dissipation afforded through the phase change process in the boiling has led to their generation of a substantial body of work in this field over several decades. Despite decades of efforts, the heat transfer performance prediction in boiling has been highly empirical with models working only for a narrow range of surface/fluids or other operating conditions. The limitation in these models is a result of a lack of mechanistic understanding of the underlying heat and mass transfer process. Surface dryout or boiling crisis is a process wherein there is a spontaneous formation of vapor film on top of the surface causing a catastrophic increase in surface temperature. The heat flux at which this formation of vapor film occurs is called critical heat flux (CHF). The CHF demarcates the upper limit to the regime of stable nucleating bubbles called nucleate boiling. The mechanism causing dryout is under debate for over half a century and several conflicting theories that cause dryout have been suggested since the 1950s including hydrodynamic, irreversible dryspot expansion, macrolayer dryout/liftoff, critical bubble distributions, vapor-recoil based theories and more. The lack of consensus is due to limitation in the information collected on the dynamic multiscale and chaotic bubble interactions. Recent advances in high-fidelity spatiotemporal phase, temperature, and heat flux measurements now enable diagnostic tools that can be leveraged to understand the complex heat transfer processes emerging from bubble-surface interaction on the boiling surface. In this work, we develop such techniques to understand various transport mechanisms underlying boiling and its crisis.</p><p dir="ltr">In this work, an experimental technique for collecting synchronized through-substrate visual and infrared (IR) measurements of a boiling surface is developed. An IR and visually transparent sapphire substrate with an IR-opaque indium-tin-oxide (ITO) heater layer is used to measure the phase (liquid and vapor areas) and temperature of the ITO layer. The visual camera collects the light reflected off the substrate from a red LED and the images collected show a contrast between liquid and vapor areas that is used to generate binarized phase maps. The temperature from the IR camera is used as boundary condition to solve a conduction problem for heat fluxes going into the fluid. Four distinct heat flux signatures corresponding to liquid, contact line, vapor and rewetting regions are observed. A post-processing methodology utilizing synchronous phase measurements to identify and partition these regions is introduced. The high-fidelity phase measurements allow for detection of fine features that are not discernable using heat flux maps alone. Analysis of the heat flux and temperature maps of partitioned regions for HFE-7100 fluid on the ITO surface show qualitative agreement with the trends in mechanisms underlying those areas. The experiment and post-processing methodology introduced in this work is the first to provide partitioning of underlying heat transfer mechanisms for multi-bubbles throughout the entire range of the boiling curve during both steady and transient scenarios.</p><p dir="ltr">The technique developed is used to probe the mechanisms underlying the boiling crisis. Theories suggested in the literature for boiling crisis are carefully evaluated and evidence against hydrodynamic instability, macrolayer dryout, vapor recoil, irreversible expansion of dryspots, macrolayer liftoff model, and bifurcations from critical distributions is observed. The signature in the peak of the spatially averaged fluid heat flux is observed to precede any other signs of dryout. Beyond the peak heat flux an increase in superheat leads to reduced heat dissipated by boiling and further increases the temperature causing a thermal runaway in the substrate that eventually leads to dryout. Hence, the boiling crisis is found to be a consequence of a peak in the nucleate boiling curve. The cause for the peak in the boiling heat flux for the surface-fluid combination tested was due to degradation of heat transfer caused by the replacement of high-heat-transfer contact line region with lower-heat-transfer vapor covered regions, among the multiple competing mechanisms. Hence, we propose that mechanistically modeling the boiling crisis rests on prediction of the peak in the upper portion of the nucleate boiling curve by considering all underlying heat transfer mechanisms. A modeling framework based on heat flux partitioning, where the overall heat transferred during boiling is calculated as the sum of the heat transferred by individual mechanisms is demonstrated as potential pathway to predict the upper portion of the nucleate boiling curve and thereby critical heat flux. Based on the terms involved in summation for individual mechanisms, we propose that the boiling curve for any given surface be interpreted as a path on a multidimensional surface (boiling manifold). Estimation of such a boiling manifold allows for prediction of the boiling curve for any surface, given development of the relations between these parameters and surface-fluid properties, and can further be used to backtrack relevant thermophysical or nucleation properties for enhanced boiling performance.</p><p dir="ltr">Enhancement of pool boiling heat transfer performance using surface modifications is of major interest to applications and this work further delves into characterizing the boiling performance using traditional surface averaged measurements of microstructured surfaces using HFE-7100. We find that microlayer evaporation from the imbibed liquid layer underneath the growing vapor bubbles is the key mechanism of boiling heat transfer enhancement in microstructures. Further, this implies that characterization of microstructured surfaces for evaporative performance can serve as an important proxy to enable heat transfer coefficient enhancement prediction during pool boiling. Hence, we also developed an easily calculated Figure of Merit (FOM) that characterizes the efficacy of evaporation from microstructured surfaces.</p><p dir="ltr">To summarize, in this work we developed an experimental technique using synchronous through-substrate high-speed visual and IR imaging methods. New post-processing techniques for partitioning of different heat transfer mechanisms are proposed and used to analyze boiling on an ITO-coated sapphire substrate with HFE-7100 as the working fluid. We reveal thermal runaway in the substrate caused due to a negative-sloping boiling curve as the mechanism of dryout. Mechanistic modeling of the critical heat flux thus involves calculating the peak in the nucleate boiling curve. A framework to predict the nucleate boiling curve and subsequently critical heat flux is proposed based on the partitioning analysis. The experimental method developed lays the groundwork for measuring heat flux and superheats associated with various mechanisms, and hence, enables validation of future partitioning-based boiling heat transfer models that intrinsically enable prediction of the peak.</p>