In der Reaktorsicherheitsforschung sind auftriebsgetriebene Strömungen von Relevanz für Störfall-szenarien mit Verdünnung der Borkonzentration und für thermische Schockbelastungen des Reak-tordruckbehälters. In der numerischen Simulation der Strömungen werden neben der Berücksichtigung der Auftriebskräfte Quell- und Korrekturterme in die Bilanzgleichungen für die turbulente Energie und die turbulente Dissipation eingeführt. Es wurden erweiterte Modelle entwickelt, in die zusätzliche Gleichungen für die Turbulenzgrößen turbulenter Massenstrom und Dichtevarianz eingehen. Die Modelle wurden in den CFD-Code ANSYS-CFX implementiert. Die Validierung der Modelle erfolgte an einem speziellen Versuchsaufbau (VeMix-Versuchsanlage), mit Einspeisung von Fluid höherer Dichte in eine Vorlage. Als Kriterien für die Validierung wurde der Umschlag zwischen impulsdominiertem Strömungsregime mit vertikalem Jet oder ein vertikales Absinken bei Dominanz von Dichteeffekten herangezogen sowie lokale Konzentrationsmessungen mit Hilfe eines speziell entwickelten Leitfähigkeits-Gittersensors. Eine Verbesserung der Simulation dichtedominierter Vermischungsprozesse mit den erweiterten Turbulenzmodellen konnte allerdings nicht nachgewiesen werden, da die Unterschiede zwischen den Rechnungen mit verschiedenen Turbulenzmodellen zu gering sind. Andererseits konnte jedoch die Simulation der Stratifikation von Fluiden unterschiedlicher Dichte im kalten Strang einer Reaktoranlage deutlich verbessert werden. Anhand der Nachrechnung von Ver-suchen am geometrisch ähnlichen Reaktor-Strömungsmodell ROCOM wurde gezeigt, dass diese Stratifikation von bedeutendem Einfluss auf die Vermischung und somit letztendlich auch auf die Temperatur- bzw. Borkonzentrationsverteilung innerhalb des Reaktordruckbehälters ist. Sie lässt sich nur korrekt simulieren, wenn ausreichend große Abschnitte des kalten Stranges mit modelliert werden. Somit konnte doch eine bessere Vorhersagegenauigkeit der Simulation der Vermischung erreicht werden. In reactor safety research, buoyancy driven flows are of relevance for boron dilution accidents or pressurised thermal shock scenarios. Concerning the numerical simulation of these flows, besides of the consideration of buoyancy forces, source and correction terms are introduced into the balance equations for the turbulent energy and its dissipation rate. Within the project, extended turbulence models have been developed by introducing additional balance equations for the turbulent quantities turbulent mass flow and density variance. The models have been implemented into the computati-onal fluid dynamics code ANSYS-CFX. The validation of the models was performed against tests at a special experimental set-up, the VeMix facility, were fluid of higher density was injected into a vertical test section filled with lighter fluid. As validation criteria the switching-over between a momentum controlled mixing pattern with a horizontal jet and buoyancy driven mixing with vertical sinking down of the heavier fluid was used. Additionally, measurement data gained from an especially developed conductivity wire mesh sensor were used. However, an improvement of the modelling of buoyancy driven mixing by use of the extended models could not be shown, because the differences between calculations with the different models were not relevant. On the other hand, the modelling of the stratification of fluids with different density in the cold leg of a reactor primary circuit could be significantly improved. It has been shown on calculations of experi-ments at the ROCOM mixing test facility, a scaled model of a real reactor plant, that this stratification is relevant as a boundary condition for the mixing process inside the reactor pressure vessel. It can be correctly simulated only if sufficient large parts of the cold legs are included in the modelling. On this way, an improvement of the accuracy of the prediction of mixing processes was achieved.

Microfluidics and its applications to Lab-on-a-Chip have attracted a lot of attention. Because of the small length scale, the flow is characterized by a low Re number. The governing equations become linear. Boundary element method (BEM) is a very good option for simulating the fluid flow with high accuracy. In this thesis, we present a 2D numerical simulation of the electrothermal flow using BEM. In electrothermal flow the volumetric force is caused by electric field and temperature gradient. The physics is mathematically modeled by (i) Laplace equation for the electrical potential, (ii) Poisson equation for the heat conduction caused by Joule heating, (iii) continuity and Stokes equation for the low Reynolds number flow. We begin by solving the electrical potential and electrical field. The heat conduction is caused by the Joule heating as the heat generation term. Superposition principle is used to solve for the temperature field. The Coulomb and dielectric forces are generated by the electrical field and temperature gradient of the system. The buoyancy force is caused by the non-uniform temperature distribution inside the system. We analyze the Stokes flow problem by superposition of fundamental solution for free-space velocity caused by body force and BEM for the corresponding homogeneous Stokes equation. It is well known that a singularity integral arises when the source point approaches the field point. To overcome this problem, we solve the free-space velocity analytically. For the BEM part, we also calculate all the integrals analytically. With this effort, our solution is more accurate. In addition, we improve the robustness of the matrix system by combining the velocity integral equation with the traction integral equation when we simulate the electrothermal pump. One of our purpose is to design a pump for the microfluidics system. Since the system is a long channel, the flow is fully developed in the area far away from the electrodes. With this assumption, the velocity profile is parabolic at the inlet and outlet of the channel. So we can get appropriate boundary conditions for the BEM part of Stokes equation. Consequently, we can simulate the electrothermal flow in an open channel. In this thesis, we will present the formulation and implementation of BEM to model electrothermal flow. Results of electrical potential, temperature field, Joule heating, electrothermal force, buoyancy force and velocity field will be presented.

The self-similar evolution of a turbulent Rayleigh-Taylor (R-T) mix is investigated through experiments and numerical simulations. The experiments consisted of velocity and density measurements using thermocouples and Particle Image Velocimetry techniques. A novel experimental technique, termed PIV-S, to simultaneously measure both velocity and density fields was developed. These measurements provided data for turbulent correlations, power spectra, and energy balance analyses. The self-similarity of the flow is demonstrated through velocity profiles that collapse when normalized by an appropriate similarity variable and power spectra that evolve in a shape-preserving form. In the self-similar regime, vertical r.m.s. velocities dominate over the horizontal r.m.s. velocities with a ratio of 2:1. This anisotropy, also observed in the velocity spectra, extends to the Taylor scales. Buoyancy forcing does not alter the structure of the density spectra, which are seen to have an inertial range with a -5/3 slope. A scaling analysis was performed to explain this behavior. Centerline velocity fluctuations drive the growth of the flow, and can hence be used to deduce the growth constant. The question of universality of this flow was addressed through 3D numerical simulations with carefully designed initial conditions. With long wavelengths present in the initial conditions, the growth constant was found to depend logarithmically on the initial amplitudes. In the opposite limit, where long wavelengths are generated purely by the nonlinear interaction of shorter wavelengths, the growth constant assumed a universal lower bound value of

Meditation means awareness. It is a process inducing a series of steps, that leads to a state of consciousness which brings serenity and clarity. While the space we choose for meditating needs to reflect the state of clear mind, if possible, it should be isolated from the noisy city and in a natural pure land. This thesis investigates meditation theory and the natural context of Peggy’s Cove, as well as material and tectonic experiments, to design a New Meditation Centre in Peggy’s Cove, Nova Scotia. The design of the New Meditation Center proposes building as a new form of architecture, the form, material and construction of which engages the viewer to admire and respect our nature.

<p>Nuclear reactors release small amounts of radioactivity during their normal operations. The most common method of calculating the dose to the public that results from such releases uses Gaussian Plume models. We are investigating these methods using CAP88-PC, a computer code developed for the Environmental Protection Agency (EPA) in the USA that calculates the concentration of radionuclides released from a stack using Pasquill stability classification. A buoyant or momentum driven part is also included. The uptake of the released radionuclide by plants, animals and humans, directly and indirectly, is then calculated to obtain the doses to the public. This method is well established but is known to suffer from many approximations and does not give answers that are accurate to be better than 50% in many cases. More accurate, though much more computer-intensive methods have been developed to calculate the movement of gases&nbsp / using fluid dynamic models. Such a model, using the code FLUENT can model complex terrains and will also be investigated in this work. This work is a preliminary study to compare the results of the traditional Gaussian plume model and a fluid dynamic model for a simplified case. The results indicate that Computational Fluid Dynamics calculations give qualitatively similar results with the possibility of including much more effects than the simple Gaussian plume model.</p>

A ventilação nas edificações tem por objetivo principal criar um ambiente interno confortável e saudável, preservando a qualidade do ar interior. Um dos principais sistemas de renovação do ar, e praticamente a única opção economicamente viável, utilizado no projeto de ambientes industriais é a ventilação natural. Esta pode ser promovida por dois mecanismos: o denominado efeito chaminé e o efeito dos ventos, porém também podem ocorrer pelos dois simultaneamente. O objetivo deste trabalho é pesquisar a viabilidade do emprego de modelos reduzidos no projeto da ventilação natural em pavilhões industriais, considerando unicamente o efeito chaminé. Para atingir esse objetivo foi ensaiado um modelo, com escala geométrica 1/100, de um pavilhão industrial real situado na cidade de Passo Fundo – RS, que será utilizado como uma fábrica para injeção de alumínio em carcaças e rotores elétricos. Nos ensaios foram medidas velocidades na abertura de saída, com anemômetro de fio quente, e temperaturas com termopares, tanto dentro como fora do modelo. Os resultados alcançados permitem avaliar quais são as leis de semelhança relevantes neste tipo de ensaio com modelo reduzido, as limitações do procedimento experimental e, ainda, determinar valores de vazões de ar nas aberturas de saída e compará-los com vazões obtidas através da utilização de alguns modelos teóricos. / The ventilation in the constructions has for main objective to create a comfortable and healthful internal environment, preserving the quality of the interior air. One of the main systems of renewal of air, and practically the only economically viable option, used in the industrial environment project is the natural ventilation. This can be promoted by two mechanisms: the called buoyancy and the effect of the winds, however also can occur for the two simultaneously. The objective of this work is to search the viability of the job of models reduced in the project of the natural ventilation in industrial pavilions, considering solely the buoyancy. To reach this objective a model was assayed, with geometric scale 1/100, of a situated real industrial pavilion in the city of Passo Fundo – RS, that will be used as a plant for injection of aluminum in carcasses and electric rotors. In the assays speeds in the exit opening had been measured, with anemometer of hot wire, and temperatures with thermocouples, in such a way inside as it are of the model. The reached results allow to evaluate which are the excellent laws of similarity in this type of assay with reduced model, the limitations of the experimental procedure and still to determine values of air outflows in the exit openings and to compare them with outflows gotten through the use of some theoretical models.

A ventilação nas edificações tem por objetivo principal criar um ambiente interno confortável e saudável, preservando a qualidade do ar interior. Um dos principais sistemas de renovação do ar, e praticamente a única opção economicamente viável, utilizado no projeto de ambientes industriais é a ventilação natural. Esta pode ser promovida por dois mecanismos: o denominado efeito chaminé e o efeito dos ventos, porém também podem ocorrer pelos dois simultaneamente. O objetivo deste trabalho é pesquisar a viabilidade do emprego de modelos reduzidos no projeto da ventilação natural em pavilhões industriais, considerando unicamente o efeito chaminé. Para atingir esse objetivo foi ensaiado um modelo, com escala geométrica 1/100, de um pavilhão industrial real situado na cidade de Passo Fundo – RS, que será utilizado como uma fábrica para injeção de alumínio em carcaças e rotores elétricos. Nos ensaios foram medidas velocidades na abertura de saída, com anemômetro de fio quente, e temperaturas com termopares, tanto dentro como fora do modelo. Os resultados alcançados permitem avaliar quais são as leis de semelhança relevantes neste tipo de ensaio com modelo reduzido, as limitações do procedimento experimental e, ainda, determinar valores de vazões de ar nas aberturas de saída e compará-los com vazões obtidas através da utilização de alguns modelos teóricos. / The ventilation in the constructions has for main objective to create a comfortable and healthful internal environment, preserving the quality of the interior air. One of the main systems of renewal of air, and practically the only economically viable option, used in the industrial environment project is the natural ventilation. This can be promoted by two mechanisms: the called buoyancy and the effect of the winds, however also can occur for the two simultaneously. The objective of this work is to search the viability of the job of models reduced in the project of the natural ventilation in industrial pavilions, considering solely the buoyancy. To reach this objective a model was assayed, with geometric scale 1/100, of a situated real industrial pavilion in the city of Passo Fundo – RS, that will be used as a plant for injection of aluminum in carcasses and electric rotors. In the assays speeds in the exit opening had been measured, with anemometer of hot wire, and temperatures with thermocouples, in such a way inside as it are of the model. The reached results allow to evaluate which are the excellent laws of similarity in this type of assay with reduced model, the limitations of the experimental procedure and still to determine values of air outflows in the exit openings and to compare them with outflows gotten through the use of some theoretical models.

The reproductive success for pelagic spawning Baltic flounders is strongly linked to the hydrodynamics in the spawning areas. Egg survival is dependent upon the ability to achieve neutral buoyancy at a depth interval where temperature and oxygen concentrations are favourable for egg development. The main focus of this thesis was to compare egg survival probabilities of pelagic eggs from Baltic flounder in the Bornholm, Gdansk and Gotland basins, prior to and after the saline water inflow in December 2014. The results showed greatly enhanced survival probabilities in Bornholm basin 2015 (p&lt;0.01), as egg survival increased from 47% in 2014 to 100% the following year. In Gdansk basin the situation was similar, and survival probability increased from 13% to 100% (p&lt;0.01). In Gotland basin no difference in survival probability was identified, although the dominant cause of mortality shifted from sedimentation, i.e. due to low salinity conditions in 2014, to oxygen deficiency in 2015 (p&lt;0,01). / BONUS INSPIRE-project, the joint Baltic Sea research and development programme (Art 185), funded jointly by the European Union’s Seventh Programme for research, technological development and demonstration and the Swedish Research Council Formas

Magister Scientiae - MSc / Nuclear reactors release small amounts of radioactivity during their normal operations. The most common method of calculating the dose to the public that results from such releases uses Gaussian Plume models. We are investigating these methods using CAP88-PC, a computer code developed for the Environmental Protection Agency (EPA) in the USA that calculates the concentration of radionuclides released from a stack using Pasquill stability classification. A buoyant or momentum driven part is also included. The uptake of the released radionuclide by plants, animals and humans, directly and indirectly, is then calculated to obtain the doses to the public. This method is well established but is known to suffer from many approximations and does not give answers that are accurate to be better than 50% in many cases. More accurate, though much more computer-intensive methods have been developed to calculate the movement of gases using fluid dynamic models. Such a model, using the code FLUENT can model complex terrains and will also be investigated in this work. This work is a preliminary study to compare the results of the traditional Gaussian plume model and a fluid dynamic model for a simplified case. The results indicate that Computational Fluid Dynamics calculations give qualitatively similar results with the possibility of including much more effects than the simple Gaussian plume model. / South Africa

No description available.