Doctor of Philosophy / Department of Chemical Engineering / Placidus B. Amama / The continued depletion of fossil fuels and concomitant increase in greenhouse gases have encouraged worldwide research on alternative processes to produce clean fuel. Fischer-Tropsch synthesis (FTS) is a heterogeneous catalytic reaction that converts syngas (CO and H₂) to liquid hydrocarbons. FTS is a well-established route for producing clean liquid fuels. However, the broad product distribution and limited catalytic activity are restricting the development of FTS. The strong interactions between the active metal catalyst (Fe or Co) and support (Al₂O₃, SiO₂ and TiO₂) during post-synthesis treatments of the catalyst (such as calcination at ~500°C and reduction ~550°C) lead to formation of inactive and unreducible inert material like Fe₂SiO₄, CoAl₂O₄, Co₂SiO₄. The activity of FTS catalyst is negatively impacted by the presence of these inactive compounds. In our study, we demonstrate the use of a modified photo-Fenton process for the preparation of carbon nanotube (CNT)-supported Co and Fe catalysts that are characterized by small and well-dispersed catalyst particles on CNTs that require no further treatments. The process is facile, highly scalable, and involves the use of green catalyst precursors and an oxidant. The reaction kinetic results show high CO conversion (85%), selectivity for liquid hydrocarbons and stability. Further, a gaseous product mixture from FTS (C1-C4) was utilized as an efficient feedstock for the growth of high-quality, well-aligned single-wall carbon nanotube (SWCNT) carpets of millimeter-scale heights on Fe and (sub) millimeter-scale heights on Co catalysts via chemical vapor deposition (CVD). Although SWCNT carpets were grown over a wide temperature range (between 650 and 850°C), growth conducted at optimal temperatures for Co (850°C) and Fe (750°C) yielded predominantly SWCNTs that are straight, clean, and with sidewalls that are largely free of amorphous carbon. Also, low-temperature CVD growth of CNT carpets from Fe and Fe–Cu catalysts using a gaseous product mixture from FTS as a superior carbon feedstock is demonstrated. The efficiency of the growth process is evidenced by the highly dense, vertically aligned CNT structures from both Fe and Fe–Cu catalysts even at temperatures as low as 400°C–a record low growth temperature for CNT carpets obtained via conventional thermal CVD. The use of FTS-GP facilitates low-temperature growth of CNT carpets on traditional (alumina film) and nontraditional substrates (aluminum foil) and has the potential of enhancing CNT quality, catalyst lifetime, and scalability. We demonstrate growth of SWCNT carpets with diameter distributions that are smaller than SWCNTs in conventional carpets using a CVD process that utilizes the product gaseous mixture from Fischer-Tropsch synthesis (FTS-GP). The high-resolution transmission electron microscopic (HR-TEM) and Raman spectroscopic results reveal that the use of a high melting point metal as a catalyst promoter in combination with either Co (1.5 nm ± 0.7) at 850ºC or Fe (1.9 nm ± 0.8) at 750ºC yields smaller-diameter SWCNT arrays with narrow diameter distributions. Scalable synthesis of carbon nanotubes (CNTs), carbon nanofibers (CNFs), and onion like carbon (OLC) in a batch reactor using supercritical fluids as a reaction media is demonstrated. The process utilizes toluene, ethanol, or butanol as a carbon precursor in combination with ferrocene that serves as a catalyst precursor and a secondary carbon source. The use of supercritical fluids for growth does not only provide a route for selective growth of a variety of carbon nanomaterials, but also provides a unique one-step approach that is free of aggressive acid treatment for synthesis of CNT-supported metallic nanoparticle composites for catalysis and energy storage applications.

In the last three decades carbon nanomaterials such as fullerenes, carbon nanotubes and graphene have attracted significant attention from the scientific community due to their unique electronic, optical, thermal, mechanical and chemical properties. Among them carbon nanotubes and graphene have been used in numerous applications for future nanoelectronics, biochemical sensors and energy harvesting technologies due to their unique properties including exceptionally high electronic conductivity and mechanical strength. Carbon nanotubes are cylindrical structures and considered to be large mesoscopic molecules with high aspect ratios. Graphene is a single atomic layer of crystalline graphite and prepared by stripping layers off the graphite using Scotch tape. Apart from this scotch tape method, chemical ex-foliation and reduction of graphite oxide produces large amounts of reduced graphene oxide which has similar properties as graphene. This thesis reports on the biosensors made of reduced graphene oxide and single walled carbon nanotubes based on their electronic properties. We also demonstrate the changes in electronic properties of single walled carbon nanotubes due to interactions with dendrimer molecules. Finally, the yielding and flow behaviour of graphene oxide nematic gel are discussed. Chapter 1 gives a general introduction about the preparation and characterization along with the electronic properties of the systems studied in this thesis, namely graphene oxide, reduced graphene oxide and single walled carbon nanotubes. We have also discussed about the experimental techniques such as Raman, UV-visibe and infrared spectroscopy, atomic force and scanning tunneling microscopy and different types of rheometers used in this thesis work. In Chapter 2, we discuss top-gated field effect transistor characteristics of the devices made of reduced graphene oxide monolayer by dielectrophoresis. Raman spectrum of RGO flakes shows a single 2D band at 2687 cm 1, characteristic of a single layer graphene. The two probe current - voltage measurements of RGO flakes, deposited in between the patterned electrodes using a.c. dielectrophoresis show ohmic behavior with a resistance of 37kΩ. The temperature dependence of the resistance (R) of RGO measured between temperatures 305K to 393K yields the temperature coefficient of resistance of -9.5 10 4/K. Ambipolar nature of graphene flakes is observed upto a doping level of 6 1012/cm2 and carrier mobility of 50cm2/V-sec. The source - drain current characteristics shows a tendency of current saturation at high source - drain voltage which is analyzed quantitatively by a diffusive transport model. In Chapter 3, We demonstrate the detection of glucose molecules by using reduced graphene oxide (RGO) and aminophenylboronic acid (APBA) complex with detection limit of 5 nM. APBA functionalized RGO (APBA-RGO) flakes, prepared by stirring the aqueous GO suspension in the presence of APBA molecules at 100◦C, were used as conducting channel in our field effect transistor (FET) devices. The APBA-RGO complex formation was confirmed by atomic force microscopy (AFM), x - ray photoelectron, Raman and UV-visible spectroscopic studies. Detection of glucose molecules was carried out by monitoring the changes in electrical conductance of the APBA-RGO flake in the FET device. FET devices made of non-covelently functionalized APBA-RGO complex (nc-APBA-RGO) exhibited enhanced sensitivity over the devices made of covalently functionalized APBA-RGO complex (c-APBA-RGO). Change in normalized conductance in the FET devices made of nc-APBA-RGO flakes ( 85%) is 4 times more than that of in the devices made of c-APBA-RGO flakes in response to aqueous glucose solution with different concentrations. Specificity of APBA-RGO complex to glucose was proved from the observation of negligible change in electrical conductance of the FET devices made of nc-APBA-RGO complex after exposure to 10 mM lactose solution. Chapter 4 reports unipolar resistive switching in ultrathin films of chemically produced graphene (reduced graphene oxide) and multiwalled carbon nanotubes. The two - terminal devices with yield > 99% are made at room temperature by forming continuous films of graphene of thickness 20 nm on indium tin oxide coated glass electrode, followed by metal (Au or Al) deposition on the lm. These memory devices are non - volatile, rewritable with ON/OFF ratios up to 105 and switching times up to 10 s. The devices made of MWNT films are rewritable with ON/OFF ratios up to 400. The resistive switching mechanism is proposed to be nanogap formation. In the first part of Chapter 5, we study the interactions between SWNT and PETIM dendrimer by measuring the quenching of inherent fluorescence of the dendrimer. Also, the dendrimer - nanotube binding results in the increased electrical resistance of the hole-doped SWNT due to charge transfer interaction between the dendrimer and the nanotube. This charge transfer interaction was further corroborated by observing a shift in frequency of the tangential Raman modes of SWNT. Experimental studies were supplemented by all atom molecular dynamics simulations to provide a microscopic picture of the dendrimer - nanotube complex. The complexation was achieved through charge - transfer and hydrophobic interactions, aided by multitude of oxygen, nitrogen and n-propyl moieties of the dendrimer. We also studied the effect of acidic and neutral pH conditions on the binding affinities. In the second part, we show that SWNT decorated with sugar functionalized PETIM dendrimer is a very sensitive platform to quantitatively detect carbohydrate recognizing proteins, namely, lectins. The changes in electrical conductivity of SWNT in field effect transistor device due to carbohydrate - protein interactions forms the basis of this study. The mannose sugar attached PETIM dendrimers undergo charge - transfer interactions with the SWNT. The changes in the conductance of the dendritic sugar functionalized SWNT after addition of lectins in varying concentrations were found to follow the Langmuir type isotherm, giving the concanavalin A (Con A) - mannose affinity constant to be 8.5 106 M-1. The increase in the device conductance observed after adding 10 nM of Con A is same as after adding 20 µM of a non - specific lectin peanut agglutinin, showing the high specificity of the Con A - mannose interactions. The specificity of sugar-lectin interactions was characterized further by observing significant shifts in Raman modes of the SWNT. Chapter 6 reports the metal to semiconductor transition in metallic single-wall carbon nanotubes (SWNT) due to the wrapping of mannose attached poly (propyl ether imine) dendrimer (DM) molecule. Scanning tunneling spectroscopic (STS) measurements and ionic liquid top gated field effect transistor (FET) characteristics of the nanotube-dendrimer complex gives a band gap of 0.42eV, close to the E11 energy gap between the first van Hove singularities of 1.7nm diameter semiconducting nanotubes. The absence of Breit-Wigner-Fano (BWF) component in G band in the Raman spectrum of the nanotube-dendrimer complex corroborates the semiconductor nature of the tubes after wrapping with the dendrimer molecules. Dendrimer molecule breaks the symmetry in metallic SWNT by wrapping around it through the charge transfer interactions. In the first part of Chapter 7, we demonstrate a rigidity percolation transition and the onset of yield stress in a dilute aqueous dispersion of graphene oxide platelets (aspect ratio 5000) above a critical volume fraction of 3.75x10-4 with a percolation exponent of 2.4 ± 0.1.The viscoelastic moduli of the gel at rest measured as a function of time indicates the absence of structural evolution of the 3D percolated network of disks. However, a shear-induced aging giving rise to a compact jammed state and shear rejuvenation indicating a homogenous flow is observed when a steady shear stress (σ ) is imposed in creep experiments. We construct a shear diagram (σ vs volume fraction ϕ) and the critical stress above which shear rejuvenation occurs is identified as the yield stress σ y of the gel. The minimum steady state shear rate ƴm obtained from creep experiments agrees well with the end of the plateau region in a controlled shear rate flow curve, indicating a shear localization below ƴm. A steady state shear banding in the plateau region of the flow curve observed in particle velocimetry measurements in a couette geometry confirms that the dilute suspensions of GO platelets form a thixotropic yield stress fluid (TYSF). In the second part, we report that the creep experiments on a nematic liquid crystalline suspension of Graphene Oxide platelets which was established recently as a TYSF exhibit two characteristic timescales Tc and Tf marking the onset of yielding, and a final steady state of flow respectively. We show that both Tc and Tf exhibit a power law dependence on the applied stress σ which can be linked to the steady state flow behaviour of a TYSF. The smooth transition from Andrade creep to the onset of flow with ƴ~ t 0.7 at a critical strain ƴc for different applied stresses, is well captured by the master curve for the creep compliance, obtained through a simple scaling of the creep times with either Tc or Tf . We propose that the absence of diverging timescales for onset of flow as σ→ yield stress σy from above, is a characteristic feature of TYSF. The thesis concludes with a summary of the main results and a brief account of the scope of future work described in Chapter 8.

Magister Scientiae - MSc / The spectroscopic, SEM and Raman measurements on carbon nanotubes under the exact conditions of which OES analysis were made showed that at a pressure of 400 Torr and a flow rate of 200 sccm, the quality and quantity of single-walled carbon nanotubes was the highest. / South Africa

The thesis contains two parts. Part 1 describes the investigations on graphene and contains five sections. Section 1, gives a brief overview of graphene and other nanocarbons. The other four sections deal with various aspects of single-layer and few-layer graphene such as functionalization and solubilization, surface properties and gas adsorption, molecular charge transfer interaction and some properties and applications. Section 2 describes covalent and noncovalent functionalization and solubilization of few-layer graphene samples prepared by different methods as well as of single-walled carbon nanotubes (SWNTs). It includes covalent functionalization of graphene with organometallic reagents, noncovalent functionalization of graphene and SWNTs with surfactants as well as large aromatic molecules, and exfoliation of few-layer graphene by a water-soluble coronene carboxylate. Section 3 deals with surface properties and gas adsorption (mainly H2 and CO2) of few-layer graphenes. It is found that graphene samples with high surface area can adsorb even more than 3 wt% of H2 at high pressure which makes it promising material for gas-storage applications. Section 4 describes the molecular charge-transfer interaction of single and few-layered graphenes and SWNTs with different electron-donor and -acceptor molecules probed by both ITC measurements and Raman spectroscopy. Electron–acceptor molecules interact more strongly with graphene and SWNTs than the -donor molecules and nature of interaction of metallic SWNTs are different than the as-prepared ones. A Raman study of the interaction of single-layer graphene, prepared by micromechanical cleavage as well as chemical route, with an electron donor molecule such as tetrathiofulvalene (TTF) and an electron acceptor molecule such as tetracyanoethylene (TCNE) is examined. In Section 5, some properties and applications of graphene are discussed. These include fluorescence quenching phenomena observed with few-layer graphene samples on two fluorescent molecules such as coronene and perylene derivatives. Fabrication of a sensing device as well as of FETs prepared from doped and undoped few-layer and single-layer graphene samples forms part of this section. Part 2 of the thesis includes a brief introduction of hybrid open-framework material and synthesis, characterization and crystal structure of various open-framework metal carboxylates, starting with different transition and main group metals. The carboxylic acids used to form these frameworks vary such as simple aliphatic amino acids such as beta-alanine and aspartic acid or simple aliphatic hydroxyl carboxylic acid such as malic acid in its chiral and achiral forms or five-membered heterocyclic aromatic acid, such as imidazole dicarboxylic acid.

No description available.

Folien aus mehrwandigen Kohlenstoffnanoröhren, auch Buckypaper genannt, stellen eine vielversprechende Alternative zu herkömmlichen Schirmmaterialien für elektromagnetische Strahlung dar. Zum Aufbau eines grundlegenden Verständnisses und zur Verbesserung der Verarbeitbarkeit gegenüber kommerziell erhältlichem Buckypaper, wurden nach Auswahl eines geeigneten Herstellungsverfahrens Buckypaper aus unterschiedlichen Nanomaterialien hergestellt. Zur Untersuchung der Auswirkung ausgewählter Herstellungsparameter erfolgte dabei eine Parametervariation mittels statistischer Versuchsplanung. Zusätzlich wurden im Vorfeld weitere Einflussfaktoren betrachtet. Dadurch konnten unterschiedliche Einwaagemengen und Rohmaterialien, verschiedene Lösungsmittel und Konzentrationen der Nanomaterialien sowie diverse Prozessparameter des angewandten Nassprozesses untersucht werden. Im Rahmen der Charakterisierung der hergestellten Proben, mittels unter anderem Vierleiter- und Schirmdämpfungsmessung sowie Rasterelektronenmikroskopie, wurden die signifikanten Einflüsse der untersuchten Parameter identifiziert und beschrieben. Es konnten dadurch sehr homogene Buckypaper mit hoher Leitfähigkeit und guter Schirmungseffektivität hergestellt werden, die eine verbesserte Grundlage für die weitere Entwicklung mikrostrukturierter Schutzfolien bilden. Aus dem Ergebnis der Arbeit lassen sich optimale Herstellungsparameter von Buckypaper für den Einsatz als Schirmmaterial im Bereich der elektromagnetischen Verträglichkeit ermitteln. / Freestanding multiwalled carbon nanotube sheets, also known as buckypaper, represent a promising alternative for various applications, especially for electromagnetic interference shielding. In order to develop a fundamental understanding and improve the processability compared to commercially available buckypaper, sheets from different nanotube materials were produced after a suitable manufacturing process had been selected. Design of experiments was used to investigate the effects of various manufacturing parameters. Other influencing factors were considered in advance. Several raw materials of different weights, varying solvents and concentrations of the nanomaterials as well as various processing parameters of the applied wet process were thereby examined. Significant influences on the properties of produced buckypaper were identified during characterization by, among other means, four-point probe, shielding attenuation measurements and scanning electron microscopy. From the result, optimal manufacturing parameters can be determined. Thus, very homogeneous buckypaper with high electrical conductivity as well as good mechanical strength and shielding effectiveness could be produced. This provides a solid foundation for further development of frequency selective electromagnetic interference shields.

Two major projects involving the use of solution processed blended semiconductors for organic field effect transistors (OFET) were explored. The first incorporated unsorted single walled carbon nanotubes (SWCNTs) into a diketopyrrolopyrrole-quarterthiophene (DPP-QT) semiconductor to enhance the mobility of the OFET. 2 wt % SWCNT was found to be the optimal blend ratio, nearly doubling the device mobility (0.6 to 0.98 cm^2/V·s). Beyond this ratio, the metallic content of the SWCNT’s dropped the on/off ratio below acceptable levels. When source drain metals who’s work function poorly matched that of the DPP-QT semiconductors highest occupied molecular orbital (HOMO) were used, the SWCNT could dramatically reduce the charge injection ratio with best results achieved for Al, dropping the contact resistance from 10^5 to 45 MΩ. The second project explored the addition of small molecule additives into a UV-sensitive semiconductor 2,7-dipentyl[1]benzothieno[3,2-b][1] benzothiophene (C5-BTBT) mixed with a polymethyl methacrylate (PMMA) polymer binder. We generated a C5-BTBT based phototransistor sensitive to UV-A light. The HOMO and lowest unoccupied molecular orbital (LUMO) of C5-BTBT and the various additives were measured and discovered to play a critical role in how the device operates. We discovered if an additive has a LUMO lower in energy than C5-BTBT, it can act as a charge trap for a photogenerated electron. Electron deficient additives were found to retain a trapped electron for an extended period of time, allowing the device to remain in a high current state for an extended period of time (>1 hour). This provides an opportunity for the device to be used as an optical memory system or photoswitch. The best system could detect UV-A with a Pill > 10^5 and a photoresponsivity of 40 A/W at a Pinc of 0.0427 mW/cm^2. / Thesis / Doctor of Philosophy (PhD) / An emerging field of electronics is the use of organic materials that can be solution processed, to reduce manufacturing costs and make new and interesting products. Here we used unsorted carbon nanotubes blended into the semiconductor layer of a transistor, providing a bridge for the energy mismatch between the electrodes and the semiconductor. This allowed us the freedom to choose different metals to act as our electrodes when making electronic devices. Additionally through the correct choice of semiconductor, we added device functionality, making it responsive to UV-A light. This produced a device that could act as a UV-A sensor, logic switch or memory device. These devices are air stable and solution processable, a necessity if they are to be used in real world applications.

This dissertation summarises the study of different aspects of the aerosol-assisted chemical vapour deposition (AACVD) technique for the production of multi-wall carbon nanotubes (MWCNTs). Upscaling the synthesis while retaining the quality of MWCNTs has been a prime objective throughout the work. A key aspect of this work was the study of different growth parameters and their influence on the homogeneity of the products across the reactor. The effect of the precursor composition on the yield and quality of MWCNTs were also investigated. It was shown that the synthesis rate can be significantly (60 – 80 %) increased by tuning the composition of the precursor. Moreover, by optimising the synthesis recipe and using a larger reactor, the synthesis rate and efficiency of the precursor were increased fivefold (up to 14 g/hr) and twice (up to 88 %) respectively. Large area (up to 90 cm²), mm-thick carpets of MWCNTs which were both free-standing and on substrate were produced. The carpets could withstand normal handlings without tearing apart, making them suitable for macroscopic characterisations and applications. By in-situ qualitative and quantitative gas analysis of the atmosphere of the reactor, the thermocatalytic cracking behaviour of 25 precursors was investigated and a mechanism for successive formation of different hydrocarbon fragments inside the reactor was proposed. A number of dedicated gas analysis methods and apparatuses such as a probe for zone-by-zone gas analysis of reactor and a heated chamber for preparation of standard gas analysis samples were developed to explore some of the least investigated aspects of the thermocatalytic cracking of precursors. Mapping the reactor revealed that some single-wall and double-wall carbon nanotubes (SWCNTs and DWCNTs) were also produced near the exhaust of the reactor. The SWCNTs were partly covered by fullerene-like species and resembled different forms of carbon nanobuds. In addition, the effect of the electron beam on the interaction of the SWCNTs and the fullerene-like species was studied in situ using high-resolution transmission electron microscopy (HRTEM).

The rise of nanotechnology industries has led to the design and production of new nano-scaled materials such as quantum dots, nano-metals, carbon nanotubes, fullerenes and a myriad of functionalised derivatives. Extensive work concerning well characterised pathogenic fibres has led to the development of a fibre paradigm that suggests respirable fibres vary in their ability to cause disease based on length and pulmonary bio-persistence. Induction of oxidative stress is also a central plank of the mechanism used to explain inflammatory, fibrotic and carcinogenic effects of fibres. The toxicity of different particle types has consistently been shown to depend upon particle size and surface area, reactive surface molecular groups, metal content, organic content and the presence of endotoxins. A growing body of work has begun to examine the potential pathogenicity of carbon nanotubes to the pulmonary system as a consequence of superficial similarities to known pathogenic particle and fibres. The aim of this thesis was to investigate the potential toxicity of two commercially manufactured multi-walled carbon nanotubes (MWCNT) compared to a panel of low and high toxicity particles and fibres. The pro-inflammatory nature of MWCNT was examined in vitro and in vivo to determine the effects they may exert in the pulmonary system. In aqueous solutions of phosphate buffered saline, saline and cell culture medium (with or without foetal calf serum supplementation) MWCNT were found to exist as tight aggregates even after sonication. Analysis of metal content of MWCNT by ICP-AES revealed the presence of a low percentage of non extractable residual iron. From analysis of MWCNT by electron spin resonance (ESR) the CNT were found to be ready producers of a free radical species, despite this MWCNT were not able to cleave plasmid DNA. Upon incubation with the alveolar epithelial cell line A549 MWCNTs did not cause noticeable toxicity but did dose dependently deplete total glutathione levels. No increase in production of the pro-inflammatory cytokine IL-8 could be detected at the level of protein or at the level of mRNA. Analysis of the levels (protein and mRNA) of the pro-fibrotic mediator TGF-β did not indicate induction of a fibrotic response to MWCNT. Neither were MWCNTs found to consistently activate the pro-inflammatory associated transcription factor nuclear factor kappa B (NF-κB). Upon instillation into the peritoneal cavity of mice MWCNT failed to induce a pro-inflammatory response in contrast to long amosite asbestos that induced an extensive inflammatory reaction. Analysis of the diaphragms of exposed animals revealed the induction by MWCNT of an apparent foreign body type reaction. Overall with limited processing and dispersion MWCNT were morphologically more akin to particles than fibres. Although apparently able to spontaneously generate ROS in aqueous solution this did not translate into a capacity to cause toxicity or a capacity to induce inflammation either in vitro or in vivo.

Carbon nanotubes (CNT) are a new form of industrially relevant nano-scale particle and are seen as the cutting edge of the burgeoning nanotechnology revolution which promises to impact on all our lives. Due to high length to diameter ratio, CNT are perhaps the most well known of a growing collection of high aspect ratio nanoparticles (HARN). However the production and use of carbon nanotubes has presented an interesting toxicological question based on its structure and raised the question ‘are carbon nanotubes like asbestos?’. Few people are unaware of the devastating global pandemic of diseases caused by asbestos and similarities in needle-like shape between asbestos and nanotubes have raised fears that nanotubes may mimic asbestos-type disease. The purpose of this study was to investigate this link, based on the wealth of information known about the toxic effects of certain forms of fibre on the respiratory system. From this we hope to identify those carbon nanotubes which are hazardous whilst not prejudicing the use of those industrially relevant materials which can be used safely. Within fibre toxicology there exists a central paradigm which outlines the main properties a fibrous particle must possess if it is to exert pathogenic effects in the body. This paradigm outlines the importance of length, thinness and biopersistence to a fibre and an absence of one or more of these attributes results in a loss of pathogenicity. We took this paradigm and, using suitable asbestos and non-asbestos controls, applied it various morphological forms of carbon nanotubes using an in vivo model. The resultant data demonstrates for the first time that asbestos-like pathogenic behaviour associated with carbon nanotubes is closely linked to the morphology of the nanotubes and their aggregates. Specifically our results showed that CNT which possessed a long, straight length were highly inflammogenic and fibrogenic within the peritoneal cavity of mice; a model sensitive to the pathogenic effects of fibres. As well as length, the importance of biopersistence in the pathogenesis of fibrous particles has been known for many years and is a central attribute affecting the pathogenicity of fibres. Amphibole asbestos is known to be durable, a commercially exploited attribute and as such is biopersistent in the lung which is a key feature of its pathogenicity. Glass fibre on the other hand is bio-soluble, and whilst long and inhalable, does not cause significant disease due to its lack of biopersistence. Based on the grapheme structure of CNT which impart exceptional strength and rigidity and the chemical inertness of carbon we would hypothesis that CNT would be biopersistent and therefore fulfil another of the criteria of the fibre pathogenicity paradigm (FPP). Our aim therefore has been to establish the durability of CNT against fibrous particles of known durability using a synthetic solution maintained at a pH to simulate the lung environment. Using a range of 4 CNT and using both durable and non-durable fibres such as amphibole asbestos and glass fibre to bench mark our result; we demonstrated that 3 of the 4 CNT tested displayed exceptional durability whilst the fourth lost approximately 30% of its mass during the experiment with concomitant reduction in pathogenicity. As well as length and biopersistence, the surface of a particle has been shown to contribute to the overall toxicity of a particle and in certain circumstances, such as that of quartz, the surface of the particle can be the biologically active component. In the case of carbon nanotubes, surface functionalisation is commonly used for various endpoints including the addition of various tags and labels for tracking. As such our further aim was to investigate the relationship between the length-dependent pathogenicity of a fibre sample and the surface of the fibre. By using different forms of functional groups attached to the surface of a pathogenic carbon nanotube we aim to critically test if the level of inflammation and fibrosis triggered in vivo can be altered by simple alteration of the surface. Our results showed that surface modification of CNT could alter the inflammogenic and fibrogenic effects of CNT which may have important implications when considering the hazard assessment of functionalised HARN. As CNT are not the only form of fibrous nanomaterial and within this project we also attempted to determine the applicability of the FPP to further high aspect ratio nanomaterials. In order to do this we set out to determine the generality of this hypothesis by asking whether nickel nanowires, a radically different form of HARN to CNT, show length-dependent pathogenicity. Nickel oxide nanowires synthesised to be predominantly long (>20 μm) act similarly to amphibole asbestos in showing the ability to elicit strong inflammation in the mouse peritoneal model in a dose dependent manner; inflammation was not seen with the short (<5 μm) nanowires. In summation, the results from this study are the first to show that long HARN can indeed behave like asbestos when in contact with the sensitive mesothelium. This study suggests a potential link between inhalation exposure to long nanotubes and asbestos-related disease, especially mesothelioma and as such this may have immediate implications across many disciplines if care is to be taken to avoid a long term legacy of harm.