<p> An experimental evaluation of three desulphurisers for pig iron has been conducted. Sodium vapor, blast furnace slag enriched with cerium oxide and a rare earth alloy named misch metal have been used. </p> / Thesis / Master of Engineering (MEngr)

Desulfovibrio alaskensis G20 and other sulfate-reducing bacteria cause significant damage to metal pipelines and other infrastructure through a metabolic pathway that releases toxic hydrogen sulfide into their surroundings. The biocorrosion that results from the release of hydrogen sulfide creates significant economic burden, and can pose health risks for those exposed to this chemical. They are commonly present in the form of biofilms, an extracellular matrix composed of bacterial cells, polysaccharides, proteins, nucleic acids, and other materials. These biofilms are difficult to remove, and they provide protection to the bacteria within from anti-bacterial treatments. Desulfovibrio alaskensis G20 is a strain derived from a wild-type bacterium collected from an oil well corrosion site and is a model organism for understanding biofilm formation of sulfate-reducing bacteria and how these biofilms can be prevented or inhibited by techniques such as cerium oxide nanoparticle coating. To this end, samples of Desulfovibrio alaskensis G20 were grown anaerobically in 24-well and 96-well plates, and the resultant biofilm growth was measured through spectrophotometry. Several different environmental parameters were tested, including temperature, electron donor molecules, basal and enriched growth media, and oxidative stress, revealing several affinities for production of biofilm growth.

No description available.

Ceria is a lanthanide series element that can exist as Ce3+ or Ce4+. Cerium oxide nanostructures are being developed for use in industry as catalysts. Nanostructures often behave differently from their corresponding macrostructures and these new behaviors can result in novel and important biological and chemical properties. The free radical theory of aging suggests that free radicals many of which are reactive oxygen species, damage cellular macromolecules. This damage can contribute to degenerative diseases, cancer and aging. Recent research has shown that ceria oxide nanoparticles protected cells from UV and radiation damage as well as decrease intracellular reactive oxygen species in primary cell cultures. The enzyme superoxide dismutase (SOD) protects the cell from free radicals by reacting with superoxide, a reactive oxygen species. Chemicals that catalyze the same reaction as SOD are referred to as SOD mimetics. Another biologically significant free radical is nitric oxide, a reactive nitrogen species. Nitric oxide is an important signaling molecule in both the cardiovascular and nervous system; however it can also cause damage to proteins through nitrosylation. When superoxide and nitric oxide react with each other they form the highly potent free radical, peroxynitrite. This reaction naturally occurs in the phagolysosome of the macrophage and is utilized by the immune system to kill pathogens. Nanoceria was tested for activity against superoxide, nitric oxide and peroxynitrite. The results presented in this work show that ceria oxide nanoparticles exhibit SOD mimetic activity and reduce protein nitrosylation in vitro.

Advancing applications of engineered nanomaterials (ENM) in various fields create the opportunity for intended (e.g. drug and gene delivery) or unintended (e.g. occupational and environmental) exposure to ENM. However, the knowledge of ENM-toxicity is lagging behind their application development. Understanding the ENM hazard can help us to avoid potential human health problems associated with ENM applications as well as to increase their public acceptance. Ceria (cerium [Ce] oxide) ENM have many current and potential commercial applications. Beyond the traditional use of ceria as an abrasive, the scope of ceria ENM applications now extends into fuel cell manufacturing, diesel fuel additives and for therapeutic intervention as a putative antioxidant. However, the biological effects of ceria ENM exposure have yet to be fully defined. Both pro-and anti-oxidative effects of ceria ENM exposure are repeatedly reported in literature. EPA, NIEHS and OECD organizations have nominated ceria for its toxicological evaluation. All these together gave us the impetus to examine the oxidative stress effects of ceria ENM after systemic administration. Induction of oxidative stress is one of the primary mechanisms of ENM toxicity. Oxidative stress plays an important role in maintaining the redox homeostasis in the biological system. Increased oxidative stress, due to depletion of antioxidant enzymes or molecules and / or due to increased production of reactive oxygen (ROS) or nitrogen (RNS) species may lead to protein oxidation, lipid peroxidation and/or DNA damage. Increased protein oxidation or lipid peroxidation together with antioxidant protein levels and activity can serve as markers of oxidative stress. To investigate the oxidative stress effects and the mechanisms of ceria-ENM toxicity, fully characterized ceria ENM of different sizes (~ 5nm, 15nm, 30nm, 55nm and nanorods) were systematically injected into rats intravenously in separate experiments. Three brain regions (hippocampus, cortex and cerebellum) were harvested from control and ceria treated rats after various exposure periods for oxidative stress assessment. The levels of oxidative stress markers viz. protein carbonyl (PC), 3-nitrotyrosine (3NT), and protein bound 4-hydroxy-2-trans-nonenal (HNE) were evaluated for each treatment in each control and treated rat organ. Further, the levels and activities of antioxidant proteins, such as catalase, glutathione peroxidase (GPx), glutathione reductase (GR), super oxide dismutase (SOD), were measured together with levels of heat shock proteins heme oxygenase -1 and 70 (HO-1 and Hsp-70). In addition, the levels of pro-inflammatory cytokines IL-1β, TNF-α, pro-caspase-3, and autophagy marker LC-3A/B were measured by Western blot technique. In agreement with the literature-proposed model of oxidative stress hierarchy mechanism of ENM-toxicity, the statistical analysis of all the results revealed that the ceria ENM-induced oxidative stress mediated biological response strongly depends on the exposure period and to some extent on the size of ceria ENM. More specifically, a single intravenous injection of ceria ENM induced tier-1 (phase-II antioxidant) response after shorter exposure periods (1 h and 20 h) in rat brain. Upon failure of tier-1 response after longer exposure periods (1 d to 30 d), escalated oxidative stress consequently induced tier-2 and tier-3 oxidative stress responses. Based on our observations made at chronic exposure period (90 d) after the single i.v. injection of ceria ENM, we could extend the model of oxidative stress hierarchy mechanisms for ceria-ENM-induced toxicity. Considering the evaluation of all the oxidative stress indices measured in 3-brain regions, oxidative stress effects were more prominent in hippocampus and the least in cerebellum, but no specific pattern or any significant difference was deduced.

The present work investigates the tribological properties of solid particles as lubricant additives in lubricants. Two types of solid particles, Ceria nanoparticles (CeO2) and Zinc borate ultrafine powders (ZB UFPs), were used as the lubricant additives in this study. The friction and wear behaviours of these lubricant additives in different base lubricants were identified. With an appropriate application of these solid lubricant additives, the friction reduction and wear resistance properties of the lubricant have been successfully improved. Without assistance of surfactant or surface modification, the two types of solid particles behave very differently. Evident performance was observed that pure ZB UFPs were capable of considerably reducing the friction coefficient of sunflower oil and liquid paraffin when they were used as a lubricant additive without further treatment. On the contrary, CeO2 nanoparticles did not show noticeable contribution to friction reduction when they were used as the only additive in water. Only when surfactant Sorbitan monostearate was employed to enhance the dispersibility of CeO2 nanoparticles in water, the application of this additive was capable of reducing friction coefficient of the water based lubricant effectively. Surface modification of the solid particles was carried out to improve the dispersibility of these particles in base lubricants. Oleic acid (OA) and Hexadecyltrimethoxysilane (HDTMOS) were selected as the modification agents. Modified CeO2 nanoparticles and ZB UFPs revealed outstanding wear resistance property. An improvement of up to 15 times was identified although this improvement on wear resistance, in this case, was often companied by a rise in friction coefficient. Tribo-films generated by tribo-chemical reaction were observed on most of the worn surfaces and the formation of this tribo-film appeared to have played an important role in the friction and wear behaviours of a system. A tenacious tribo-film with good surface coverage was only generated on the worn surface when HDTMOS modified solid particles were used as lubricant additives. The mechanical properties and elemental composition of the tribo-film were studied with nano-indentation and energy-dispersive X-ray spectroscopy (EDS). Finally, based on the experimental evidence, different functionalities of CeO2 nanoparticles and ZB UFPs as solid lubricant additives were recognized.

Nanotechnology is a rapidly growing industry of global economic importance, with new technologies exploiting the novel characteristics of materials manufactured at the nanoscale being developed for use within the biomedical, electronic, energy production and environmental sectors. The unusual properties of engineered nanomaterials (ENMs) that make them useful in such applications have led to concerns regarding their potential impact on the environment. The aquatic environment is particularly at risk of exposure to ENPs, yet, there is currently little known about their behaviour in aquatic systems, their capacity to be taken up by aquatic organisms or their potential toxic effects. The studies that were conducted during this work sought to investigate the ecotoxicology of a range of metal and metal oxide nanoparticles using fish as a vertebrate model. In order to gain a better understanding of the uptake and effects of ENMs in fish, rainbow trout (Oncorhynchus mykiss) were exposed to nanoparticulate (34 nm) and bulk (>100 nm) titanium dioxide particles via the water column (500 and 5000 µg L-1), and to titanium dioxide nanoparticles via the diet (0.1 and 1 mg g-1 food) and via intravenous injection (1.3 mg kg-1 body weight). Uptake of titanium dioxide into the tissues of trout after waterborne and dietary exposure was found to be very low, suggesting limited bioavailability of the nanoparticles to the fish, although small amounts of uptake of titanium dioxide across the gill epithelial membrane were observed using coherent anti-stokes Raman scattering. Intravenously injected titanium dioxide accumulated and was retained in the kidneys for up to 21 days, but no adverse effect on kidney function was detected. Silver nanoparticles are already in widespread use in a variety of consumer products such as wound dressings, food containers, sock fabrics and paints, principally for their antimicrobial activity. Despite its growing commercialisation, there is little known about the environmental effects of the use of nanoparticulate silver in these products. In order to investigate these potential effects, rainbow trout were also exposed to 10 nm, 35 nm and bulk (0.6-1.6 µm) silver particles via the water column at concentration of 10 and 100 µg L-1. Uptake of silver in the gills and liver of trout occurred, with smaller nanoparticles showing a greater propensity for association with gill tissue, but with no significant differences in uptake between particles of different sizes in the liver. No increases in lipid peroxidation were detected in gills, liver or blood plasma of trout, however, expression of cyp1a2 was significantly up-regulated in exposures to 10 nm silver particles in the gill, suggesting an increase in oxidative metabolism. In an attempt to develop an effective high through-put in vitro screening assay for ENMs, the suitability of isolated rainbow trout primary hepatocytes was examined as a potential model for in vitro screening of a range of toxicological endpoints in response to nanoparticles and for studying uptake of nanoparticles into cells. The hepatocytes retained a good level of functionality after culturing as evidenced by vitellogenin production in response to the synthetic oestrogen, 17β-oestradiol. The cultured hepatocytes, however, showed limited responses on exposure to titanium dioxide, zinc oxide, cerium oxide and silver nanoparticles for lipid peroxidation and glutathione-s-transferase activity assays. Furthermore, the hepatocytes were unresponsive to the induction of these biological responses in the positive controls, suggesting they are not a good model for investigating the potential toxic effects of ENMs in terms of these endpoints. Uptake of the nanoparticles into the cells, however, was demonstrated by coherent anti-stokes Raman spectroscopy, indicating that this in vitro assay may provide a useful model for studying uptake of ENPs into cells. The studies conducted in this thesis contribute the science base regarding the bioavailability of ENPs in aquatic media as well as highlighting the importance of characterisation of ENPs in understanding their behaviour, uptake and effects in aquatic systems and in fish.

Cerium oxide nanoparticles (CONPs) are being investigated for several anti-oxidant applications in medicine. One of their most promising applications is as a radioprotective drug, an area of research in need due to the severe side effects from radiation therapy. In this work, the potential of CONPs as a radioprotective drug is examined using four criteria: favorable biodistribution/pharmacokinetics, low toxicity, ability to protect normal tissue from radiation damage, and lack of protection of tumor. The mechanisms of action of CONPs are also studied. Biodistribution was determined in radiolabeled CONPs with surface coatings including citrate, dextran T10-amine (DT10-NH2), dextran T10-polyethylene glycol (DT10-PEG), dextran T10-sulfobetaine (DT10-SB) and poly(acrylic acid) (PAA), and compared to uncoated. 89Zr was incorporated into CONPs for positron emission tomography (PET) imaging and ex vivo tissue analysis in tumor bearing mice. Compared to uncoated [89Zr]CONPs, coated [89Zr]CONPs showed improved biodistribution, including significantly enhanced renal clearance of PAA- [89Zr]CONPs. The toxicity of CONPs was evaluated in vitro and in vivo, with low toxicity at therapeutic doses. After clinically mimetic radiation therapy, pre-treatment of mice with coated and uncoated CONPs showed greater than 50% reduction of cell death in normal colon tissue, comparable to the clinically available radioprotective drug amifostine. Tumor control after irradiation of spontaneous colon tumors was unchanged with PAA-CONP pre-treatment, while citrate, DT10-PEG, and uncoated CONP pre-treatment had slightly less tumor control. Xenograft tumors were irradiated after pH normalizing treatment with sodium bicarbonate and PAA-CONP pre-treatment. Treatment of these tumors showed slightly less tumor control than irradiation alone or PAA-CONP plus irradiation, demonstrating that the acidic pH of the tumor microenvironment may be the basis of preventing CONPs’ radioprotective properties in tumor. These studies show that, among the variations of CONPs tested, PAA-CONP shows the most promise for its good biodistribution and quick clearance, low toxicity, ability to protect normal tissue, and lack of protection of tumor, meeting all the criteria set forth for an ideal radioprotective drug. Further studies on the effects of pH on CONPs actions may further elucidate their mechanisms of action, advancing them as a candidate for use as a radioprotective drug during radiation therapy.

Este trabalho investigou a técnica de solução coloidal(gelcasting) em meio polimérico para a obtenção de partículas de óxido de cério, visando seu emprego como catalisadores na combustão do metano. A formulação do sistema coloidal foi baseada na hidrólise de sais, como acetilacetonato de cério e nitrato de cério em presença de aditivos tais como polivinilbutiral (PVB), polivinilpirrolidona (PVP) e polivinilacetato (PVA), nas concentrações de 5, 10 e 15%, em meio alcoólico ou aquoso. Essas soluções, contendo os íons de interesse, foram submetidas a um tratamento térmico a 650°C, por 30 minutos, com taxa de aquecimento de 2°C/min. Após o tratamento térmico, os produtos obtidos foram caracterizados quanto a sua morfologia, área superficial, cristalinidade, perda de massa e atividade catalítica. As amostras obtidas a partir de acetilacetonato de cério mostraram-se mais reativas do que as obtidas a partir de nitrato de cério na catálise da combustão do metano, pois apresentaram maiores conversões e atingiram maiores temperaturas durante o processo, o que é de extrema importância uma vez que a combustão catalítica do metano é utilizada para a geração de energia térmica. Durante o processo de combustão, utilizando-se as partículas obtidas a partir de acetilacetonato de cério, observou-se a liberação de grandes quantidades de compostos nitrogenados quando comparado aos resultados dos ensaios com as partículas obtidas com nitrato de cério. Após a combustão do metano, as amostras sofreram significativa alteração na área superficial, provavelmente devido à intensidade do calor liberado, o que deu origem a maior aglomeração dos particulados. / This study investigatedto obtainparticles ofcerium oxide, for use as catalysts for thecombustion of methaneusing the techniqueofthroughpolymericcolloidal solution (gelcasting).Obtaining thecolloidal systemisbased onhydrolysis ofsalts such asceriumacetylacetonate,cerium nitratein the presence ofadditives such aspolyvinylbutyral(PVB),polyvinylpyrrolidone (PVP) and polyvinyl acetate(PVA),at concentrations of 5, 10 and 15% inaqueousoralcoholic medium. Thesesolutions containingionsof interestwere subjected to aheat treatment at 650°C for30 minutes, with heating rate of2°C/min.After heat treatment, the fibers were characterized accordingto their morphology, surface area, crystallinity, weight loss andcatalytic activity. Samplesobtained fromceriumacetylacetonatewere morereactivethan theceriumnitrateto thecombustion of methane, as showed greaterconversions andhigher temperaturesreachedduring the process, which is of utmost importancesince thecombustioncatalyticmethaneis usedfor generatingthermal energy.Duringthe combustion processusing theobtained fromparticlesof ceriumacetylacetonate, there was the release of largequantities ofnitrogencomparedto the results ofassays withthe particles obtainedwithcerium nitrate.Afterthe reactionwith methane, the samples underwentsignificantchange insurface area, probably dueto the intensity of heat of this reaction, which helps to agglomerate the particles.

Na atualidade, a reforma do metano é de grande interesse industrial para o aproveitamento deste gás na produção de hidrogênio e de gás de síntese. Entre as reações de reforma do metano, destacam-se as reações de reforma a vapor e a reação com dióxido de carbono.O catalisador comumente utilizado nos processos re reforma do metano é Ni/Al2O3. Porém durante este processo, ocorre uma indesejada formação de depósitos de espécies carbonáceas na superfície deste catalisador, os quais levam a sua destruição mecânica e conseqüentemente sua desativação. Por isso, uma das propriedades mais importantes de um bom catalisador para as reações de reforma do metano é a sua resistência à desativação. Entre as propostas para melhorar o desempenho do catalisador encontra-se a incorporação do óxido de céria junto ao suporte alumina.Catalisadores 5%Ni/xCeO2/Al2O3 (x = 0, 1, 5, 10, 20 e 100%) forma preparados, caracterizados e submetidos a ensaios catalíticos nas reações de reforma a vapor e com dióxido de carbono de metano com objetivo de avaliar o efeito da adição de céria ao suporte.Os suportes e os catalisadores forma obtidos pelo método de impregnação e calcinados a 500ºC. Estes compostos foram caracterizados por Fisissorção de Nitrogênio pelo método B. E. T., Espectroscopia dispersiva de raios-X (EDX), espectroscopia de na região do ultra violeta e do visível (UV-vis-NIR) e Redução à Temperatura Programada (RTP). Após todas as reações catalíticas verificou-se que a adição de céria é benéfica ao catalisador Ni/Al2O3 e entre todos os catalisadores avaliados, o melhor desempenho obtido foram dos catalisadores contendo 20% de céria em massa, seguido do catalisador contendo 10%. / Nowadays, the methane reforming is large interest industrial for the take advantage of these gas in production the hydrogen and synthesis gas (syngas). Among in the reactions of methane stand of the reactiosn steam reformig and carbon dioxide reforming of methane. The main catalysts uses in the methane reforming is Ni/Al2O3. However, the supported-nickel catalyst is susceptible to the deactivation or the destruction by coke deposition. The carbon dissolves in the nickel crystallite and its diffuses through the nickel, leading for formation of the carbon whiskers, which results in fragmentation of the catalyst. Modification of such catalysts, like incorporation of suitable promoters, is desirable to achieve reduction of the methane hydrogenolysis and/or promotion of the carbon gasification. Catalysts 5%Ni/xCeO2/Al2O3 (x = 0, 1, 5, 10, 20 e 100%) were prepared, characterized and evalueted in reactions steam and carbon dioxide refoming of methane with objetive the value effect loading oxide ceria in support. The suppots and catalysts were prepared by impregnation method and calcined at 500ºC. The supports and catalysts were characterized by X Nitrogen Adsorption by B.E.T., method -rays diffraction (XRD), , Xrays dispersive spectroscopy (XDS), to spectroscopy in the region of the ultraviolet and the visible (UV-vis NIR) to and temperature programmed reduction (TPR). After all the catalytic reactions check which the addition of cerium is beneficial for Ni/Al2O3 catalysts and the best catlysts is 5%Ni/20%CeO2/Al2O3 following 5%Ni/10%CeO2/Al2O3.