[pt] O presente texto aborda aspectos do problema de sincronização em sistemas de telecomunicações, com enfoque nas funções de demodulação síncrona, regeneração, multiplexação/demultiplexação (TDM) e comutação (digital). São tratados os métodos de obtenção de referência de portadora e de referência de relógio, os recursos de malha de amarração de fase (PLL) e de memória elástica. O objetivo final consiste na descrição dos métodos de sincronização de rede, nas modalidades plesiócrona (e plesiócrona com justificação), mestre-escravo e sincronização mútua. As subredes de sincronização são analisadas em termos de topologia, segurança, determinação de freqüência e fases de operação e de compensação de defasagens na transmissão. A apresentação é feita em termos de um texto didático para a descrição dos problemas e de suas soluções. / [en] This text deals with aspects of synchronization in telecommunication systems, with emphasis on the operational functions of synchronous demodulation, signal regeneration, multiplexing/demultiplexing (TDM) and digital switching. The methods of carrier recovery, clock recovery, phase locked loop and elastic store are presented. The final goal consists on the description of network synchronization methods, in the plesiochronous (and plesiochronous with justification), master-slave and mutual synchronization modalities. The synchronization subnetworks are analised in terms of topology, safety, operation frequency and phases, and transmission phase delay compensation. The presentation is made in a didactical way, describing the problems and their possible solutions.

All-optical synchronization and its application in advanced optical communications have been investigated in this dissertation. Dynamics of all-optical timing synchronization (clock recovery) using multi-section gain-coupled distributed-feedback (MS-GC DFB) lasers are discussed. A record speed of 180-GHz timing synchronization has been demonstrated using this device. An all-optical carrier synchronization (phase and polarization recovery) scheme from PSK (phase shift keying) data is proposed and demonstrated for the first time. As an application of all-optical synchronization, the characterization of advanced modulation formats using a linear optical sampling technique was studied. The full characterization of 10-Gb/s RZ-BPSK (return-to-zero binary PSK) data has been demonstrated. Fast lockup and walk-off of the all-optical timing synchronization process on the order of nanoseconds were measured in both simulation and experiment. Phase stability of the recovered clock from a pseudo-random bit sequence signal can be achieved by limiting the detuning between the frequency of free-running self-pulsation and the input bit rate. The simulation results show that all-optical clock recovery using TS-DFB lasers can maintain a better than 5 % clock phase stability for large variations in power, bit rate and optical carrier frequency of the input data and therefore is suitable for applications in ultrafast optical packet switching. All-optical timing synchronization of 180-Gb/s data streams has been demonstrated using a MS-GC DFB laser. The recovered clock has a jitter of less than 410 fs over a dynamic range of 7 dB. All-optical carrier synchronization from phase modulated data utilizes a phase sensitive oscillator (PSO), which used a phase sensitive amplifier (PSA) as a gain block. Furthermore, all-optical carrier synchronization from 10-Gb/s BPSK data was demonstrated in experiment. The PSA is configured as a nonlinear optical loop mirror (NOLM). A discrete linear system analysis was carried out to understand the stability of the PSO. Complex envelope measurement using coherent linear optical sampling with mode-locked sources is investigated. It is shown that reliable measurement of the phase requires that one of the optical modes of the sampling pulses be locked to the optical carrier of the data signal to be measured. Carrier-envelope offset (CEO) is found to have a negligible effect on the measurement. Measurement errors of the intensity profile and phase depend on the pulsewidth and chirp of the sampling pulses as well as the detuning between the carrier frequencies of the data signal and the center frequency of the sampling source. Characterization of the 10-Gb/s RZ-BPSK signal was demonstrated using the coherent detection technique. Measurements of the optical intensity profile, chirp and constellation diagram were demonstrated. A CW local oscillator was used and electrical sampling was performed using a sampling scope. A novel feedback scheme was used to stabilize homodyne detection.

Considere um sistema de comunicação em que um equipamento transmissor envia pacotes de dados, de tamanho fixo e a uma taxa uniforme, a um equipamento receptor. Considere também que esses equipamentos estejam conectados por uma rede de comutação de pacotes, que introduz um atraso aleatório a cada pacote que trafega na rede. Nesta tese, é proposto um modelo de recuperação adaptativa de relógio capaz de sincronizar as frequências e as fases desses dispositivos, dentro de certos limites especificados de precisão. Esse método para atingir sincronização de frequência e de fase é baseado em medições dos tempos de chegada dos pacotes ao receptor, que são usados para controlar a dinâmica de um phase-locked loop (PLL) digital. O desempenho desse modelo é avaliado através de simulações numéricas realizadas considerando valores de parâmetros realistas. Os resultados indicam que esse esquema tem potencial para ser usado em aplicações práticas. / Consider a communication system in which a transmitter equipment sends fixed-size packets of data at a uniform rate to a receiver equipment. Consider also that these equipments are connected by a packet-switched network, which introduces a random delay to each packet. In this thesis, we propose an adaptive clock recovery scheme capable of synchronizing the frequencies and the phases of these devices, within specified limits of precision. This scheme for achieving frequency and phase synchronization is based on measurements of the packet arrival times at the receiver, which are used to control the dynamics of a digital phase-locked loop (PLL). The scheme performance is evaluated via numerical simulations performed by using realistic parameter values. The results suggest that this scheme has potential to be used in practical applications.

Considere um sistema de comunicação em que um equipamento transmissor envia pacotes de dados, de tamanho fixo e a uma taxa uniforme, a um equipamento receptor. Considere também que esses equipamentos estejam conectados por uma rede de comutação de pacotes, que introduz um atraso aleatório a cada pacote que trafega na rede. Nesta tese, é proposto um modelo de recuperação adaptativa de relógio capaz de sincronizar as frequências e as fases desses dispositivos, dentro de certos limites especificados de precisão. Esse método para atingir sincronização de frequência e de fase é baseado em medições dos tempos de chegada dos pacotes ao receptor, que são usados para controlar a dinâmica de um phase-locked loop (PLL) digital. O desempenho desse modelo é avaliado através de simulações numéricas realizadas considerando valores de parâmetros realistas. Os resultados indicam que esse esquema tem potencial para ser usado em aplicações práticas. / Consider a communication system in which a transmitter equipment sends fixed-size packets of data at a uniform rate to a receiver equipment. Consider also that these equipments are connected by a packet-switched network, which introduces a random delay to each packet. In this thesis, we propose an adaptive clock recovery scheme capable of synchronizing the frequencies and the phases of these devices, within specified limits of precision. This scheme for achieving frequency and phase synchronization is based on measurements of the packet arrival times at the receiver, which are used to control the dynamics of a digital phase-locked loop (PLL). The scheme performance is evaluated via numerical simulations performed by using realistic parameter values. The results suggest that this scheme has potential to be used in practical applications.