• Refine Query
  • Source
  • Publication year
  • to
  • Language
  • 26
  • 10
  • 4
  • Tagged with
  • 51
  • 51
  • 9
  • 9
  • 8
  • 8
  • 7
  • 7
  • 6
  • 6
  • 6
  • 5
  • 5
  • 5
  • 5
  • About
  • The Global ETD Search service is a free service for researchers to find electronic theses and dissertations. This service is provided by the Networked Digital Library of Theses and Dissertations.
    Our metadata is collected from universities around the world. If you manage a university/consortium/country archive and want to be added, details can be found on the NDLTD website.
41

Hydrogeochemical modeling of the speciation and leaching of fly ash co-disposed with water, brines and organics : a case study of Sasol-Eskom coal ash disposal, South Africa.

Mbugua, John Mwai. 06 December 2013 (has links)
Two coal utility plants in South Africa selected (one from Sasol and another from Eskom) for this study produce large volumes of fly ash (over 40 Mt from Eskom at Tutuka, and 3 Mt from Sasol Synfuels at Secunda annually), and brines as by-products during coal processing. Co-disposal of the brines and fly ashes has been a normal practice in these coal-utility plants for decades. Long-term management of fly ash is necessary and requires an understanding and knowledge of how the different waste materials interact with water and brines in different chemical situations. However the geochemistry of their interactions, the leaching and mobility of elements in these disposal systems has not been fully understood. This work gives insights into the chemical processes taking place in the brine-water/brines systems that govern the concentrations of major and minor elements in ash leachates under different environmental conditions. The possible presence of organic compounds (subsequently referred to as 'organics') in brines and their effects on the leaching chemistry of fly ash was also studied. Sustainability and long term impact of the co-disposal of fly ash and brines on the environment was studied through static (batch tests) modeling of the pH-dependent acid neutralization capacity (ANC) tests and columns modeling for dynamic leach tests. The modeling was based on experimental results from other Sasol-Eskom ashbrine project collaborators. Modeling results of the ANC tests were in good agreement with the reported experimental results, which revealed that the release trends of various elements (including trace, heavy elements and contaminants) contained in fly ash into solution is highly pH dependent. However Na, K, Mo and Li exhibited constant solubilisation which was independent of pH changes from all the scenarios. The presence of different constituents of brines subjected to ANC resulted to different ANC capacities ranging from 0.98 moles H⁺/Kg dry ash (of ash-organics mixed with Mg-brines) to 3.87 H⁺/Kg dry ash for those with the C(4) brines. As expected, those constituents from the cationic brines were found on the lower region of acid addition (in the order Mg-brines < Ca-brines < Na-brines) while the anionic brines were found at the upper region of acid addition (in the order S(6)-brines < Cl-brines < C(4)-brines). In the middle region of acid addition were three important scenarios: that of ash with brine, ash without brines (i.e. ash with DMW) and ash with both ASW organics and combined brines. It was from these three scenarios that a generalization of the effect of brines and organics on the ANC was inferred. The ANC of ash with demineralised water (DMW) was 2.33 mol H⁺/Kg dry ash and that of ash with ASW organics lower at 2.12 mol H⁺/Kg dry ash which was the same value as that of ash with combined brines. This indicated that brines decreased the ANC of ash by about 9.01 % and which could be attributed to the acid-base neutralization process and the dynamics of solid phase dissolutions in response to the acid addition. Both fly ashes exhibited a typical pH > 12 (suspension in demineralised water) and the predominant cation even at this high pH is Ca²⁺ (at concentration > 0.002 mmol/L). This indicates that dissolution of CaO and formation of OH⁻ species at pH > 10 contributes to acid neutralisation capacity of both fly ashes and is the greatest contributor to the acid neutralizing capacity of both fly ashes. Two broad leaching behaviours as a function of pH were observed from the three fly ash-ASW organics-brines scenarios (i) leaching of Ca, Mg, Ni and Sr follows a cationic pattern where the concentration decreases monotonically as pH increases; (ii) leaching of Al, Fe, Ti and Zn follow an amphoteric pattern where the concentration increases at acidic and alkaline pH, although Al showed some anomaly from pH 11 where the concentration decreased with the increase in pH. Al showed an amphoteric pattern in which its release increased between pH 12.8 and 11 for all the scenarios and then decreased with decrease in pH down to neutral pH of 7. The batch leaching simulation results from hydrogeochemical modeling also showed that mineral dissolution, precipitation and new phase formation during ash-organics-brines interactions was controlled by pH. The newly formed phases however remain in equilibrium with the ash-brines-organics mixture. Each individual mineral phase dissolution/precipitation/formation system controls the concentration and speciation of the respective constituent elements as evidenced by the log C-pH diagrams obtained from the modeled scenarios. The ash-brines-organics interactions do exhibit and affect the mineralogical chemistry of fly ash. However the extent to which these interactions occur and their effect, varies from one scenario to another, and are dependent on the amounts and type of the constituent brine components. Organics do have a significant effect on dissolution characteristics of few minerals such as calcite, mullite, kaolinite, Ni₂SiO₄, and SrSiO₃ due to complexation effect. The effect is quantitatively conspicuous for calcite mineral phase and for the formation of some new phases such as Fe(OH)₃(am)-CF and portlandite. The composition of the liquid phase from acid neutralisation capacity experiments was successful.Hydrogeochemical modeling was used as a means to provide insights and understanding of the complex reactions taking place, speciation and mineralogical changes occurring. These changes would serve to predict future environmental scenarios when pH conditions change. In this study, an extension of the application field of PHREEQC hydrogeochemical code for modeling and simulation of equilibrium; kinetic and transport mechanisms associated with the interaction of water; and organics and brines with fly ash during their co-disposal is successfully demonstrated. The parameters associated with these mechanisms were used as inputs into the PHREEQC program using modified Lawrence Livermore National Laboratory (LLNL) database for inorganic brines and MINTEQ.V4 database for organics, and used to model the results of ANC test data for the fly ashes. A special reference is made to two separate modeled mineralogical ash recipes from two of the South African power utility plants' fly ash systems, namely, Tutuka and Secunda. The effects of brines in the leaching of major, minor and trace elements at various pH values and the mineralogical changes associated with the intermediate and final products from the interactions of ash-brines systems under different scenarios are qualitatively and quantatively discussed. Multiphase saturation characteristics have been determined for mineral species in contact with water and brines. The modeling results indicated that several mineral phases could be controlling the species concentration in the leachates, and the ANC and column modeling results corroborated well in many aspects with the experimental results obtained from collaborating institutions (South Africa Universities and Research institutions). In addition, application of the PHREEQC model to the ash heap under different disposal systems was carried out to predict the heap leachate composition and geochemical transformations taking place in a period of time. Pore water chemical analysis, and moisture content analysis revealed that contact of the ash with water is a crucial factor in the mobilization of the contaminants with time. Maximum weathering/dissolution of the ash is observed in the top layer (1-3) m and at the point of contact with the subsurface water level which was in good agreement with the model results. The surface layer and the very lowest layers of the dump in contact with lateral flows experience the highest degree of weathering leading to depletion of species. The geophysical transformation of fly ash was also captured through the porosity change calculations and the results revealed that geochemical reactions do affect the porosity of fly ash during the weathering processes. These modelling results were in agreement with the hydraulic tests and salt leaching tests conducted during Sasol-Eskom ashbrine project in Phase I which suggested that salts captured in the ash will become mobile and leach from the fly ash over time. The data therefore indicates that ash dumps may not act as sustainable salt sinks. These findings may have some bearing on engineering decisions on fly ash reuse. From the above observations, it is apparent that release of large quantities of the salts in the ash depends on the extent of its interaction with brines being used for irrigation or with water, either through plug-in flow after a rainfall event or contact with groundwater. The results revealed effects of brine-water contact time with fly ash, the flow volume and velocity, the pH, the degree of saturation, hydrogeology and ash heap geometry as important factors that affect fly ash transformation and weathering. Overall, the ash heap modeling enhanced the understanding of the ash-brines interactions and demonstrated that leachate composition is determined by the following factors; (i) the mass flows from the pores of fly ash, (ii) the surface dissolution of the mineral phases, (iii) the various chemical reactions involved during the ash-brine and ash-water interactions, (iv) the interactions with a gas phase (atmospheric CO₂), (v) the composition of the initial fly ash, and (vi) by the leachate flow and hydrodynamics as captured in the conceptual model. Any ash handling system should therefore be designed to take these criteria into consideration to prevent environmental contamination. The modeling results also gave indications that the ash-brine co-disposal in dry ash systems would be an unsustainable way of locking up brine salts in the long run. In this Thesis, modeling results were used to support experimental data which further reaffirmed the important role hydrogeochemical modeling plays in liquid and solid waste management. Furthermore, hydrogeochemical modeling complements the work of analytical/environmental scientists as well as guiding the future solid waste management and engineering decisions. / Thesis (Ph.D.)-University of KwaZulu-Natal, Westville, 2012.
42

Systematic investigation of smoke emissions from packed-bed residential coal combustion devices

Makonese, Tafadzwa 12 November 2015 (has links)
PhD. (Energy Studies) / A review of health effects of emissions from solid fuel combustion shows clear links between morbidity and mortality, and residential combustion smoke exposure. On the interior plateau of the South African Highveld, use of coal fuel in informal domestic braziers – imbaulas – constitutes a major source of local ambient and household air pollution. This thesis aimed to develop an improved understanding of the complex processes of packed-bed combustion in small domestic devices studying smoke emissions from informal domestic stoves. A robust dilution sampling system for testing emissions from residential coal-burning appliances was developed and used in the emission studies. Systematic experiments were carried out to evaluate thermal performance and emissions of coal braziers, varying fire ignition method, ventilation rate, fuel moisture and fuel quality. Three field-collected and three laboratory constructed braziers were tested, with a range of ventilation hole-densities. The variables measured are particle mass (PM2.5 and PM10), gases (CO, CO2, NOx), and particle composition and morphology. Emission factors, referenced to zero excess oxygen are reported. Two fire-ignition methods are evaluated namely: the conventional bottom-lit updraft (BLUD) method, and the top-lit updraft (TLUD)–the so-called Basa njengo Magogo method. PM2.5 and PM10 emissions reduced by 80% on average when using the TLUD in contrast to the business-as-usual BLUD method. High smoke emissions from the BLUD method during pyrolysis are found to be associated with an oxygen deficit, allowing products of incomplete combustion to be emitted. Influences of ventilation rates on the stove emissions are reported – products of incomplete combustion (PM2.5 and CO) are higher for low ventilation rates. For a given device, PM2.5 and PM10 emission factors reduce by ~50% from low to high ventilation rates (an advantage offset by firepower too high for convenient cooking).
43

An assessment of the environmental effects of coal ash effluents using structural and functional parameters of aufwuchs communities

Nicholson, Richard B. January 1982 (has links)
A site-specific artificial stream system receiving selected levels of fly ash, heavy metals, or sulfates was compared to a natural stream (Adair Run) influenced by effluent from the fly ash settling basin at Glen Lyn, Virginia. Aufwuchs communities colonizing glass microscope slides were monitored for dry weights, ash-free dry weights, chlorophylls, ATP, and 14-carbon and 35-sulfate assimilation rates. Productivity appeared to be enhanced in Adair Run due to increased concentrations of sulfates (150 mg/l), and temperature (delta T=4. 5 C) in the ash basin effluent. A recovery response was observed following termination of basin operation. Artificial streams receiving selected concentrations of fly ash at low TSS (8.0-25 mg/l) exhibited no inhibition for all parameters except chlorophyll a and ATP. Higher levels (80-100 mg/l) depressed all aufwuchs parameters except AFDW within six days. Six heavy metals (Cd, Cr, Cu, Ni, Pb, Zn), when collectively pumped into artificial streams at concentrations modeling the ash basin effluent effectively lowered productivity parameters. This was followed by a slow recovery response. Aufwuchs demonstrated an ability to bioconcentrate heavy metals from ambient water. Streams dosed with sulfates demonstrated a stimulation response at concentrations modeling the Adair Run system. Current U.S. EPA effluent guidelines for fly ash (30 mg/l maximum weekly average; 100 mg/l maximum) are evaluated concerning the degree of protection afforded primary producers of aquatic receiving systems. / Master of Science
44

Alteration and recovery of a stream macroinvertebrate community exposed to fly ash effluent and an analysis of the causative factors

Specht, Winona L. January 1985 (has links)
Structural and functional changes in the macroinvertebrate community of a fly ash receiving stream were investigated during the final year of fly ash basin operation and for 10 months after fly ash discharges to the stream were terminated. Minimal changes were observed in the benthic community until the basin reached 77% of capacity, at which time the number of macroinvertebrate taxa, density of organisms, diversity, and relative abundance of Ephemeroptera all declined sharply. Ephemeroptera (mayflies) exhibited the greatest sensitivity to the fly ash effluent, while the beetle, Psephenus herricki (Coleoptera) was very resistant to the effects of fly ash. Recovery responses of the macroinvertebrate community were observed one month after fly ash discharges to the stream ended, while full recovery required 10 months. Based on the results of the field study, the toxicity of fly ash constituents (fly ash particulates, pH excursions, and heavy metals) was examined in three species of aquatic insects: Stenonema pudicum (Ephemeroptera), Hydropsyche slossonae (Trichoptera), and Psephenus herricki. Fly ash particulates were not acutely toxic to the three species at concentrations of 4000 mg/l. Stenonema pudicum was consistently the most sensitive species to acidic and alkaline pH extremes and heavy metals (Cd, Cr, Cu, Zn, and a metal mixture), while Psephenus herricki was consistently the most resistant species tested. Alkaline pH extremes and elevated heavy metal concentrations are believed to be responsible for the observed changes in the macroinvertebrate community of the receiving stream during the final two months of basin operation, while elevated heavy metal concentrations were responsible for earlier perturbation of the stream community. / Ph. D.
45

Quantification of the bioccumulation potential of various chemical elements from coal fly ash using Brassia juncea and Spinacia oleracea L and its implication for phytoremediation of coal fly ash dumps

Mashau, Aluwani Shiridor 18 September 2017 (has links)
MENVSC / Department of Ecology and Resource Management / South Africa is highly dependent on coal for production of electricity. The combustion of coal for electricity generation produces waste by-products which include fine ash (fly ash) and coarse ash. Fly ash (FA) is produced in large amounts while its utilization is low due to its classification as a hazardous material. Sasol produces about 7 million tons of FA, while Eskom produces about 28 million tons of coal FA annually. FA is a fine by-product from pulverized coal with detrimental effects on plants, soil or land, animals and human beings, and pollutes the air. The present investigation focuses on the examination of the chemical elements bioaccumulation and phytoremediation potential of Indian mustard (Brassica juncea) and Spinach (Spinacia Oleracea L). X-ray fluorescence (XRF) was used to analyze the elemental composition of FA and soil, Scanning Electron Microscope (SEM) to examine the morphology, while X-ray diffraction (XRD) analysis was used to evaluate the mineralogy of FA. The concentrations of metal and non-metal species that are released from FA on contact with water at different conditions were quantified using ICP-MS. Pot culture experiment was conducted to grow Brassica juncea and Spinacia Oleracea L. using FA and soil as growth medium. Leachates from the pots were collected and analysed using ICP-MS. Plant parts from harvested Brassica juncea and Spinacia Oleracea L. were cut separately and analysed using ICP-MS for the concentrations of different metal and non-metal species in plant parts. Plant parts were also used to estimate biomass and chlorophyll content (leaves). To prepare these plant samples for analysis, the powdered plant sample (0.5 g) was digested through aqua regia (HCL:HNO3 = 3:1 (v/v)) to near dryness using hotplate and filled to 100 mL of MilliQ water. The samples were filtered and directly used to determine the chemical elements concentrations. Blanks and internal standards were used for quality assurance during analysis. Chemical elements that are present in FA and sometimes in higher concentrations are associated with detrimental effects in plants, animals and human beings, hence phytoremediation is vital. Bioconcentration factor (BCF) was used to estimate the metal species accumulation ability of the plants from the FA, FA/soil mixtures, while translocation factor (TF) was used to assess the plant species potential for phytoremediation of coal fly ash dumps. Analysis of Varience (ANOVA) was used to statistically test data using Graphpad software package. Relationship between chemical elements in soil, FA and FA+soil growth media and also different plant parts (root, stem and leaf) of B. juncea and S. Oleracea L were calculated using the t - test, ANOVA-Bartlett test, Mann-Whitney Test and Kruskal-Wallis Statistic (KW) depending on each data set. The physicochemical characterization of coal fly ash showed that FA from Grootvlei power station can be classified as class F with an alkaline pH level of 10.62. It showed that particle morphology of this FA had a lower degree of sphericity with irregular agglomerations of many particles while there were dominant spherical particles and smaller sharp needle like particles. It is also an alumino-silicate material as confirmed by the high SiO2 and Al2O3 content, while soil leachates had an average/neutral pH of 7.22 with very high amounts of Si. In both soil and FA, elements that were expected to be readily available to plants included Ca, Si, K, Ba, Mo, Na, Al, Mg, Sr and non-essential elements (Si, Ba, Na, Al, Sr), which, if uptaken by plants’ roots can have negative impacts in plants. Physicochemical analysis of soil, FA and FA+soil leachates showed that the alkalinity of the FA changed over time and there was also a decrease in the EC due to dissolution iv of soluble major oxides, which was promoted by continuous water irrigation. The soil and FA+soil growth media showed similar results. Chemical elements like B, Mn, Fe and Ba were occurring at higher concentrations in leachates for most weeks in the pot culture experiments. However, it was observed that in the eleventh week of leachate collection all these chemical elements decreased to very low concentrations. This suggest that these chemical elements can be reduced over time as plants are being irrigated which is either due to uptake by plants or washed off with water. Statistically, there was a significant difference for different chemical elements of leachates from different growth media for each plant species (B. juncea and S. Olearcea L.). The overall growth rate shows that S. Oleracea L was better than that of B. juncea especially in the FA media over time, while the biomass of the two plant species showed similar results. After all, even though S. Oleracea L had carotenoid content below detection limits, it had higher chlorophyll b than B. juncea for all growth media in general. But, statistically there was no significant difference between the two plant species in terms of growth rate and biomass; even between the plant parts denoting similar growth performance for the two plant species under study. The bioaccumulation potential of the two plant species showed that chemical elements such as Fe, Mn, Ba, Zn and B were highly accumulated by the different parts of the plants. However, the chemical elements such as of Mo, Ni, Cu, and Cr showed the least concentrations. This trend was similar for all growth media and both plant species but this changes over time for different growth media and plant species as increasing and decreasing trends can be noticed. This led to no significant difference between plant species and also growth media, statistically. High BCF values of Fe, Mn, Ba, Zn and B were observed in the different parts of the plants for both plant species. However, Mo, Ni, Cu, and Cr had BCF values less than 1 for most growth media over time. BCF values in plant parts differed with time, growth media and plant species. Translocation of chemical elements shows that the B. juncea plant proved to be an effective phytoremediation plant species since it is effective in translocation of many chemical elements for different growth media to shoots while S. Oleracea L failed to translocate most chemical elements from stem to leaves although it translocated some from root to shoots. Hence, it can be concluded from the study that both species can be used in phytoremediation of coal fly ash dumps but with B. juncea being the most effective accumulator and translocator of many chemical elements. However, it can be recommended that chelating agents like ethylene diamine tetra acetic acid (EDTA) be introduced to solubilize chemical elements from growth media matrix into growth media solution to facilitate the quick transport of chemical elements into xylem, and increase
46

Estudo comparativo sobre a adsorção de diferentes classes de corantes em zeólitas de cinzas de carvão: modelagem cinética e de equilíbrio / Comparative study on the adsorption of different classes of dyes in zeolites of coal ashes: kinetic and equilibrium modelling

Bertolini, Tharcila Colachite Rodrigues 05 February 2014 (has links)
As cinzas leves e pesadas de carvão foram utilizadas na síntese das zeólitas (ZCL e ZCP) por tratamento hidrotérmico alcalino. As zeólitas modificadas de cinzas leves e pesadas (ZMSL e ZMSP) foram preparadas pela mistura de ZCL e ZCP com o surfactante brometo de hexadeciltrimetilamônio. Os adsorventes foram caracterizados por diferentes técnicas, tais como: métodos físico-químicos, fluorescência de raios-X, espectroscopia na região do infravermelho, difração de raios-X e microscopia eletrônica de varredura. O processo de adsorção dos corantes cristal violeta (CV) e do ácido laranja 8 (AL8) foi realizado em sistema de batelada com o objetivo de investigar o equilíbrio e a dinâmica dos materiais zeolíticos no tratamento de efluentes. Os modelos de cinética de pseudo-primeira-ordem e pseudo-segunda-ordem foram aplicados aos dados experimentais e a cinética de pseudo-segunda-ordem descreveu a adsorção dos corantes sobre os adsorventes. Estudos da difusão intrapartícula revelaram que as velocidades de adsorção não eram controladas somente pela etapa de difusão. O modelo de Freundlich ajustou-se melhor aos dados experimentais para todos os sistemas estudados, com exceção do sistema CV/ZCL, que seguiu o modelo de Langmuir. As capacidades máximas de adsorção das zeólitas modificadas foram maiores do que aquelas obtidas para as zeólitas não modificadas. Este melhor desempenho é devido ao ambiente hidrofóbico proporcionado pela adsorção do surfactante catiônico na superfície do adsorvente. Os parâmetros das isotermas de adsorção foram usados para prever o design do equipamento para a realização de processo de adsorção descontínuo de estágio simples. / The coal fly and bottom ashes were used in the synthesis of zeolites (ZFA and ZBA) by alkaline hydrothermal treatment. The modified zeolites from coal fly ash and botton ash (ZMSF and ZMSB) was performed by mixing ZFA e ZBA with the surfactant hexadecyltrimethylammonium bromide. The adsorbents were characterized by different techniques such as: physico-chemical methods, X-ray fluorescence spectroscopy, infrared, X-ray diffraction and scanning electron microscopy. The adsorption of the dye crystal violet (CV) and acid orange 8 (AO8) was carried out in batch system with the purpose of investigating the equilibrium and dynamics of zeolitic materials in wastewater treatment. Pseudo-first- and second-order kinetic models have been applied to the experimental data and pseudo-second-order kinetic was found to describe the adsorption of the dyes on the adsorbents. Intra-particle diffusion studies revealed that the adsorption rates were not solely controlled by the diffusion step. The Freundlich model was better ajusted to the experimental data for all systems studied, except system CV/FTA, which followed the Langmuir model. The maximum adsorption capacities of the modified zeolites were higher than those obtained for the unmodified zeolites. This best performance is due to the hydrophobic ambient provided by the adsorption of cationic surfactant on the surface of the adsorbent. The parameters of adsorption isotherms were used to predict the design of the equipment for performing adsorption discontinuous single stage.
47

Estudo comparativo sobre a adsorção de diferentes classes de corantes em zeólitas de cinzas de carvão: modelagem cinética e de equilíbrio / Comparative study on the adsorption of different classes of dyes in zeolites of coal ashes: kinetic and equilibrium modelling

Tharcila Colachite Rodrigues Bertolini 05 February 2014 (has links)
As cinzas leves e pesadas de carvão foram utilizadas na síntese das zeólitas (ZCL e ZCP) por tratamento hidrotérmico alcalino. As zeólitas modificadas de cinzas leves e pesadas (ZMSL e ZMSP) foram preparadas pela mistura de ZCL e ZCP com o surfactante brometo de hexadeciltrimetilamônio. Os adsorventes foram caracterizados por diferentes técnicas, tais como: métodos físico-químicos, fluorescência de raios-X, espectroscopia na região do infravermelho, difração de raios-X e microscopia eletrônica de varredura. O processo de adsorção dos corantes cristal violeta (CV) e do ácido laranja 8 (AL8) foi realizado em sistema de batelada com o objetivo de investigar o equilíbrio e a dinâmica dos materiais zeolíticos no tratamento de efluentes. Os modelos de cinética de pseudo-primeira-ordem e pseudo-segunda-ordem foram aplicados aos dados experimentais e a cinética de pseudo-segunda-ordem descreveu a adsorção dos corantes sobre os adsorventes. Estudos da difusão intrapartícula revelaram que as velocidades de adsorção não eram controladas somente pela etapa de difusão. O modelo de Freundlich ajustou-se melhor aos dados experimentais para todos os sistemas estudados, com exceção do sistema CV/ZCL, que seguiu o modelo de Langmuir. As capacidades máximas de adsorção das zeólitas modificadas foram maiores do que aquelas obtidas para as zeólitas não modificadas. Este melhor desempenho é devido ao ambiente hidrofóbico proporcionado pela adsorção do surfactante catiônico na superfície do adsorvente. Os parâmetros das isotermas de adsorção foram usados para prever o design do equipamento para a realização de processo de adsorção descontínuo de estágio simples. / The coal fly and bottom ashes were used in the synthesis of zeolites (ZFA and ZBA) by alkaline hydrothermal treatment. The modified zeolites from coal fly ash and botton ash (ZMSF and ZMSB) was performed by mixing ZFA e ZBA with the surfactant hexadecyltrimethylammonium bromide. The adsorbents were characterized by different techniques such as: physico-chemical methods, X-ray fluorescence spectroscopy, infrared, X-ray diffraction and scanning electron microscopy. The adsorption of the dye crystal violet (CV) and acid orange 8 (AO8) was carried out in batch system with the purpose of investigating the equilibrium and dynamics of zeolitic materials in wastewater treatment. Pseudo-first- and second-order kinetic models have been applied to the experimental data and pseudo-second-order kinetic was found to describe the adsorption of the dyes on the adsorbents. Intra-particle diffusion studies revealed that the adsorption rates were not solely controlled by the diffusion step. The Freundlich model was better ajusted to the experimental data for all systems studied, except system CV/FTA, which followed the Langmuir model. The maximum adsorption capacities of the modified zeolites were higher than those obtained for the unmodified zeolites. This best performance is due to the hydrophobic ambient provided by the adsorption of cationic surfactant on the surface of the adsorbent. The parameters of adsorption isotherms were used to predict the design of the equipment for performing adsorption discontinuous single stage.
48

Wind erosion modelling system parameters to determine a practical approach for wind erosion assessments

Liebenberg-Enslin, Hanlie 15 July 2014 (has links)
Ph.D. (Geography) / The focus of Aeolian research has mainly been on wind-blown dust from desert and arid areas. Numerous dust emission schemes have been developed over the years aimed at accurately estimating dust emission rates from various soil types and land use surfaces. Limited research has been done on wind-blown dust from smaller area sources – such as mine tailings and ash storage facilities. Lately, the concern about the environmental and health impacts, caused by dust from mine tailings storage facilities and ash disposal sites, has become more prominent, calling for better methods in determining dust emissions and their related impacts. This thesis established a practical approach for wind-blown dust emissions estimation and dispersion modelling from mine waste and ash storage facilities for the purpose of legal compliance assessment. Extensive research on the physics of wind erosion has been done over the past decade, compelling the re-evaluation of previously applied techniques. The latest and most widely applied dust emission schemes are evaluated to determine, through systematic testing of parameterisation and validation, using empirical mine waste and coal ash data, a best-practice prescription for quantifying wind-blown dust emissions and determining effects on a local scale using commercially available dispersion models. The applicability of two dust-flux schemes, (one developed by Marticorena and Bergametti (1995) and the simplified Shao 2004 scheme, as reported in 2011) for the quantification of wind-blown dust emissions, were tested using site specific particle size distribution data, bulk density and moisture content from six gold- and one platinum- tailings storage facilities and from two ash storage facilities. The availability of the required input parameters and the uncertainty associated with these parameters, were tested. The dependency of the Shao et al. (2011) model on plastic pressure (P) and the coefficient cy, both of which are not easily determined, added to the uncertainty of the emission rates. In this study, P and cy were both interpolated using the range limits provided by Shao (2004) for natural soils. By calculating P, using the salt and calcium carbonate content, similar values were obtained. The minimally disturbed dust fraction, as required by the Shao et al. (2011) scheme were derived from particle size distribution analysis but found to be more representative of the fully disturbed particle size faction (𝜂fi) and therefore needed to be corrected to represent the minimally disturbed particle size faction (𝜂mi) through the application of a correction factor, CF𝜂mi. Specific attention was given to the quantification of the threshold friction velocity (u*t) and the threshold velocities (u*), and how these two parameters relate to each under variable wind speed and time durations. This was tested using sub-hourly averaged meteorological data, one set reflected 5-minute intervals and the other 10-minute intervals. Dependent on the frequency and strength of the sub-hourly wind gusts, the resulting dust-flux rates were found to vary significantly when based on hourly averaged wind data in comparison with 5- and 10-minute wind data. Dispersion models are useful tools in air quality management. Whereas ambient monitoring provides actual ambient concentrations for specific pollutants at set locations, atmospheric dispersion models can be used to simulate any number of pollutants and determine the impacts at any location within the modelling domain. These dust-flux schemes of Marticorena and Bergametti (1995) and Shao et al. (2011) have been coupled with the US EPA regulatory Gaussian plume AERMOD dispersion model for the simulation of ground level concentrations resulting from wind-blown dust from mine tailings facilities. For this study, two Case Studies were evaluated; one included two of the gold mine tailings and the second focused on the platinum tailings. Simulated ambient near surface concentrations were validated with ambient monitored data for the same period as used in the model. For the Marticorena and Bergametti (1995) dust-flux scheme, only z0 had to be adjusted to provide a good fit with measured data – whereas the Shao et al. (2011) scheme resulted in significantly higher concentrations, resulting in an over-prediction of the measured data. By applying the correction factor, CF𝜂mi, to the minimally disturbed dust fraction, the predicted concentrations improved considerably. The coupling of the dust-flux schemes with a regulatory Gaussian plume model provided simulated ground level PM10 concentrations in good agreement with measured data. The best correlation was found under conditions of high wind speeds when the prevailing wind was from the direction of the tailings storage facility. This thesis demonstrates that simulated impacts from complex source groups can be performed, within an acceptable range of certainty, using widely applied dust-flux schemes. These dust-flux schemes, developed primarily for large-scale desert and arid areas, have been demonstrated to be applicable also to small-scale sources, of the order of 1 km2, and can be coupled to regularly available dispersion models for impact evaluations of wind-blown dust. The value of this improved approach to the mining and mineral processing industries are substantial, allowing for more accurate health risks and adverse environmental assessments from wind-blown dust from large material storage piles, a source category that has hitherto been difficult to quantify.
49

[en] REMOVAL OF MANGANESE II FROM LIQUID EFFLUENTS THROUGH THE SORPTION ON PALYGORSKITE AND COAL ASH / [pt] REMOÇÃO DE MANGANÊS II CONTIDO EM EFLUENTES LÍQUIDOS ATRAVÉS DA SORÇÃO EM PALIGORSQUITA E CINZAS DE CARVÃO

OMAR ALFREDO JUAREZ SOTO 21 December 2005 (has links)
[pt] Neste trabalho estudou-se a remoção de manganês II, de efluentes da indústria mineira, por sorção, utilizando dois tipos de sorventes: o minério de paligorsquita proveniente Nova Guadalupe (Piauí) e a fração pesada das cinzas proveniente da queima de carvão mineral da indústria termoelétrica de Tubarão (SC). Foi apresentado um breve histórico da sorção de metais em argilas e óxidos, além das características dos processos de sorção e a análise dos principais trabalhos correlatos disponíveis na literatura, procurando evidenciar dados de isotermas e cinética de sorção em sorventes similares. Para a caracterização dos sorventes realizaram-se: análise granulométrica, fluorescência e difração de raios-X, análise termogravimétrica, medição da superfície especifica (BET) e análise com o microscópio eletrônico de varredura. Para avaliar o efeito múltiplo das variáveis: concentração inicial de manganês, pH, força iônica e razão sorvente/solução, na sorção de manganês utilizou-se a metodologia de supe rfície re sposta, empregando o planejamento estatístico central composto para ambos os sorventes. As variáveis mais significativas foram a razão sorvente/solução, a concentração inicial de manganês e a força iônica, para a paligorsquita; e para as cinzas de carvão foram a concentração inicial de manganês, a razão sorvente/solução e o pH. Determinou-se a cinética de sorção de manganês a diferentes valores de pH a 25 ºC, adequandose melhor o modelo de pseudo -segunda ordem para os dois tipos de sorvente. Mostrou-se uma maior constante cinética a pH 8,5 (26,6 g.mg -1min -1) para a paligorsquita e para as cinzas de carvão a pH 6,0 (5,02 g.mg -1min-1). Foram testados os modelos de Langmuir e Freundlich para avaliar a capacidade de sorção dos sorventes. O modelo de Fr eundlich se ajustou melhor para a paligorsquita e o modelo de Langamuir para as cinzas de carvão. A importância dos resultados obtidos visa à utilização destes sorventes na remoção de manganês de acordo com as características do efluente e da disponibilidade do sorvente, além de abrir a possibilidade de aplicação destes sorventes para remoção de outros metais. / [en] In this work the removal of manganese II, of mining industry effluent was studied, by sorption, using two types of sorbent s: palygorskite ore and heavy coal ash (proceeding from coal burning of a thermo electrical plant ). A brief historical of metals sorption in clays and oxides was presented, besides the characteristics of sorption processes and the analysis of the main works available in literature, looking for evidence isotherms and sorption kinetic data in similar sorbent s. The sorbents characterization was realized by: screen anal ysis, X-ray fluorescence and diffraction, thermo gravimetric analysis, specific surface area (BET) and scanning electron microscopy. To evaluate the multiple effect of the variable s: manganese initial concentration, pH, ionic strength and ratio sor bent/sol ution, in the manganese sorption was used the surface res ponse methodology, us ing a statistical experimental central composite design for both sor bents. The most significant variables were the ratio sorbent/solution, the initial manganese concentration and the ionic strength, for the pal ygorskite; and for coal ash were the initial manganese concentration, the ratio sorbent/solution and the pH. It was determined the manganese sorption kinetic at different pH values at 25ºC.The pseudo-second order model found to be the best correlation for both types of sorbents. The greater kinetic constant was obtained in pH 8.5 (26.6 g.mg-1min-1) for the palygorskite and for coal ash in pH 6,0 (5. 02 g.mg-1min-1). Langmuir and Freundlich models had been tested to evaluate the sorption capacity of the sorbents. The experimental data were correlated better by the Freundlich isotherm model for the palygorskite and the Langmuir isotherm model for coal ash. The importance of the results aim to use these sorbents in the manganese removal in agreement with the characteristics of the effluent and the availability of sor bent s, besides, opening the possibility to use these sor bents for the removal of other metals.
50

Novel approaches in determining baseline information on annual disposal rates and trace element content of U.S. coal combustion residues : a response to EPA’s June 2010 proposed disposal rule

Chwialkowski, Natalia Ewa 14 February 2011 (has links)
Although products of coal combustion (PCCs) such as coal ash are currently exempted from classification as a hazardous waste in the United States under the 1976 Resource Conservation and Recovery Act (RCRA), the U.S. Environmental Protection Agency (EPA) is now revising a proposed rule to modify disposal practices for these materials in order to prevent contamination of ground- and surface water sources by leached trace elements. This paper analyzes several aspects of EPA’s scientific reasoning for instating the rule, with the intent of answering the following questions: 1) Are EPA’s cited values for PCC production and disposal accurate estimates of annual totals?; 2) In what ways can EPA’s leaching risk modeling assessment be improved?; 3) What is the total quantity of trace elements contained within all PCCs disposed annually?; and 4) What would be the potential costs and feasibility of reclassifying PCCs not under RCRA, but under existing NRC regulations as low-level radioactive waste (LLRW)? Among the results of my calculations, I found that although EPA estimates for annual PCC disposal are 20% larger than industry statistics, these latter values appear to be closer to reality. Second, EPA appears to have significantly underestimated historical PCC disposal: my projections indicate that EPA’s maximum estimate for the quantity of fly ash landfilled within the past 90 years was likely met by production in the last 30 years alone, if not less. Finally, my analysis indicates that while PCCs may potentially meet the criteria for reclassification as low-level radioactive waste by NRC, the cost of such regulation would be many times that of the EPA June proposed disposal rule ($220-302 billion for PCCs disposed in 2008 alone, versus $1.47 billion per year for the Subtitle C option and $236-587 million for Subtitle D regulatory options). / text

Page generated in 0.0478 seconds