<p>QC 20150922</p>

Directed evolution is a powerful method for engineering of specific affinity proteins such as antibodies and alternative scaffold proteins. For selections from combinatorial protein libraries, robust and high-throughput selection platforms are needed. An attractive technology for this purpose is cell surface display, offering many advantages, such as the quantitative isolation of high-affinity library members using flow-cytometric cell sorting. This thesis describes the development, evaluation and use of bacterial display technologies for the engineering of affinity proteins. Affinity proteins used in therapeutic and diagnostic applications commonly aim to specifically bind to disease-related drug targets. Angiogenesis, the formation of new blood vessels from pre-existing vasculature, is a critical process in various types of cancer and vascular eye disorders. Vascular Growth Factor Receptor 2 (VEGFR2) is one of the main regulators of angiogenesis. The first two studies presented in this thesis describe the engineering of a biparatopic Affibody molecule targeting VEGFR2, intended for therapeutic and in vivo imaging applications. Monomeric VEGFR2-specific Affibody molecules were generated by combining phage and staphylococcal display technologies, and the engineering of two Affibody molecules, targeting distinct epitopes on VEGFR2 into a biparatopic construct, resulted in a dramatic increase in affinity. The biparatopic construct was able to block the ligand VEGF-A from binding to VEGFR2-expressing cells, resulting in an efficient inhibition of VEGFR2 phosphorylation and angiogenesis-like tube formation in vitro. In the third study, the staphylococcal display system was evaluated for the selection from a single-domain antibody library. This was the first demonstration of successful selection from an antibody-based library on Gram-positive bacteria. A direct comparison to the selection from the same library displayed on phage resulted in different sets of binders, and higher affinities among the clones selected by staphylococcal display. These results highlight the importance of choosing a display system that is suitable for the intended application. The last study describes the development and evaluation of an autotransporter-based display system intended for display of Affibody libraries on E. coli. A dual-purpose expression vector was designed, allowing efficient display of Affibody molecules, as well as small-scale protein production and purification of selected candidates without the need for sub-cloning. The use of E. coli would allow the display of large Affibody libraries due to a high transformation frequency. In combination with the facilitated means for protein production, this system has potential to improve the throughput of the engineering process of Affibody molecules. In summary, this thesis describes the development, evaluation and use of bacterial display systems for engineering of affinity proteins. The results demonstrate great potential of these display systems and the generated affinity proteins for future biotechnological and therapeutic use. / <p>QC 20141203</p>

Antibodies have become indispensable tools in diagnostics, research and as therapeutics. There are several strategies to generate monoclonal antibodies (mAbs) in order to avoid the drawbacks of polyclonal antibodies (pAbs) for therapeutic use. Moreover, the growing interest in precision medicine requires a well-characterized target and antibody to predict the responsiveness of a treatment. This thesis describes the use of epitope information and display technologies to generate and characterize antibodies. In Paper I, we evaluated if the epitope information of a well-characterized pAb could be used to generate mAbs with retained binding characteristics. In Paper II, the epitope on the complement protein C5 towards Eculizumab was mapped with surface display, the results of which explained the non-responsiveness of Eculizumab treatment among a patient group due to a mutated C5 gene. With this in mind, we showed efficacy in treatment of the mutated C5 variants using a drug binding to another site on C5, suggesting that our approach can be used to guide treatment in precision medicine. In Paper III, a Gram-positive bacterial display platform was evaluated to complement existing platforms for selection of human scFv libraries. When combined with phage display, a thorough library screening and isolation of nano-molar binders was possible. In Paper IV, a solid phase method for directed mutagenesis was developed to generate functional affinity maturation libraries by simultaneous targeting of all six CDRs. The method was also used to create numerous individual mutants to map the paratope of the parent scFv. The paratope information was used to create directed libraries and deep sequencing of the affinity maturation libraries confirmed the viability of the combination approach. Taken together, precise epitope/paratope information together with display technologies have the potential to generate attractive therapeutic antibodies and direct treatment in precision medicine. / <p>QC 20170418</p>

The engineering of bacterial surfaces has in recent yearsattracted a lot of attention with applications in manydifferent areas of bioscience. Here we describe the use of twodifferent surface display systems for the gram-positivebacteria Staphylococcus carnosus and Staphylococcus xylosus invarious biotechnological applications. Environmental microbiology currently attracts a lot ofattention since genetically engineered plants and bacteriamight be used as bioadsorbents for sequestration of toxicmetals. Bacterial surface display of metal-binding peptidesmight enable recycling of the biomass by desorption ofaccumulated heavymetals. In an attempt to recruitstaphylococcal display systems for bioremediation purposes,polyhistidyl peptides were successfullly displayed on thesurface of recombinant S. carnosus and S. xylosus cells.Whole-cell Ni2+-binding assays demonstrated that therecombinant cells had gained metal-binding capacity compared towild-type cells. Tailor-made, metal-binding staphylococci was created using apreviously constructed phage-display combinatorial proteinlibrary based on a fungal cellulose-binding domain (CBD)derived from the cellobiohydrolase Cel7A of Trichoderma reseii.Novel metal-binding CBDs were generated through a phagemediated selection procedure. Selected CBD variants, now devoidof cellulose binding, were randomly selected and sequenceanalysis of selected variants revealed a marked preference forhistidine residues at the randomized positions. Surface displayof these novel CBD variants resulted in recombinantstaphylococci with increased metal-binding capacity compared tocontrol strains, indicating that this could become a generalstrategy to engineer bacteria for improved binding to specificmetal ions. Directed immobilization of cells with surface displayedheterologous proteins have widespread use in modernbiotechnology. Among other things they could provide aconvenient way of generating biofilters, biocatalysts orwhole-cell diagnostic devices. It was therefore investigatedwhether directed immobilization of recombinant staphylococci oncotton fibers could be achieved by functional display of afungal cellulose-binding domain (CBD). Recombinant S. carnosuscells with surface anchored CBDs from Trichoderma reseii Cel6Awere found to efficiently bind to cotton fibers creating almosta monolayer on the fibrous support. The co-expression of thisCBD together with previously described metal-binding proteinson the surface of our staphylococci would create means fordeveloping effective bioadsorbents for remediationpurposes. The original plasmid vector, designed for heterologoussurface display on recombinant S. carnosus cells has exhibitedproblems related to structural instability, possibly due to thepresence of a phage f1 origin of replication in the vectorsequence. This would be a problem if using the vector systemfor library display applications. Therefore, novel surfacedisplay vectors, lacking the phage ori were constructed andevaluated by enzymatic and flow cytometric whole-cell assays.One such novel vector, pSCXm, exhibited dramatically increasedplasmid stability with the retained high surface density ofexpressed heterologous proteins characteristic for the originalS. carnosus display vector, thus making it potentially moresuitable for library display applications. The successful engineering of our staphylococcal displaysystem encouraged us to further evaluate the potential to usethe staphylococcal system for display of combinatorial proteinlibraries and subsequent affinity based selections using flowcytometric cell sorting. A model system of recombinant S.carnosus cells with surface displayed engineered protein Adomains was constructed. It was demonstrated that target cellscould be sorted essentially quantitatively from a moderateexcess of background cells in a single sorting-step.Furthermore, the possibility of using staphylococcal surfacedisplay and flow cytometric cell sorting also for specificenrichment of very rare target cells by multiple rounds ofcell-sorting and in between amplification was demonstrated. <b>Key words:</b>affibody, albumin binding protein, bacterialsurface display, cell immobilization, bioremediation,combinatorial protein engineering, flow cytometry,Gram-positive, metal binding, staphylococcal protein A,Staphylococcus carnosus, Staphylococcus xylosus, whole-celldevices

<p>The engineering of bacterial surfaces has in recent yearsattracted a lot of attention with applications in manydifferent areas of bioscience. Here we describe the use of twodifferent surface display systems for the gram-positivebacteria Staphylococcus carnosus and Staphylococcus xylosus invarious biotechnological applications.</p><p>Environmental microbiology currently attracts a lot ofattention since genetically engineered plants and bacteriamight be used as bioadsorbents for sequestration of toxicmetals. Bacterial surface display of metal-binding peptidesmight enable recycling of the biomass by desorption ofaccumulated heavymetals. In an attempt to recruitstaphylococcal display systems for bioremediation purposes,polyhistidyl peptides were successfullly displayed on thesurface of recombinant S. carnosus and S. xylosus cells.Whole-cell Ni2+-binding assays demonstrated that therecombinant cells had gained metal-binding capacity compared towild-type cells.</p><p>Tailor-made, metal-binding staphylococci was created using apreviously constructed phage-display combinatorial proteinlibrary based on a fungal cellulose-binding domain (CBD)derived from the cellobiohydrolase Cel7A of Trichoderma reseii.Novel metal-binding CBDs were generated through a phagemediated selection procedure. Selected CBD variants, now devoidof cellulose binding, were randomly selected and sequenceanalysis of selected variants revealed a marked preference forhistidine residues at the randomized positions. Surface displayof these novel CBD variants resulted in recombinantstaphylococci with increased metal-binding capacity compared tocontrol strains, indicating that this could become a generalstrategy to engineer bacteria for improved binding to specificmetal ions.</p><p>Directed immobilization of cells with surface displayedheterologous proteins have widespread use in modernbiotechnology. Among other things they could provide aconvenient way of generating biofilters, biocatalysts orwhole-cell diagnostic devices. It was therefore investigatedwhether directed immobilization of recombinant staphylococci oncotton fibers could be achieved by functional display of afungal cellulose-binding domain (CBD). Recombinant S. carnosuscells with surface anchored CBDs from Trichoderma reseii Cel6Awere found to efficiently bind to cotton fibers creating almosta monolayer on the fibrous support. The co-expression of thisCBD together with previously described metal-binding proteinson the surface of our staphylococci would create means fordeveloping effective bioadsorbents for remediationpurposes.</p><p>The original plasmid vector, designed for heterologoussurface display on recombinant S. carnosus cells has exhibitedproblems related to structural instability, possibly due to thepresence of a phage f1 origin of replication in the vectorsequence. This would be a problem if using the vector systemfor library display applications. Therefore, novel surfacedisplay vectors, lacking the phage ori were constructed andevaluated by enzymatic and flow cytometric whole-cell assays.One such novel vector, pSCXm, exhibited dramatically increasedplasmid stability with the retained high surface density ofexpressed heterologous proteins characteristic for the originalS. carnosus display vector, thus making it potentially moresuitable for library display applications.</p><p>The successful engineering of our staphylococcal displaysystem encouraged us to further evaluate the potential to usethe staphylococcal system for display of combinatorial proteinlibraries and subsequent affinity based selections using flowcytometric cell sorting. A model system of recombinant S.carnosus cells with surface displayed engineered protein Adomains was constructed. It was demonstrated that target cellscould be sorted essentially quantitatively from a moderateexcess of background cells in a single sorting-step.Furthermore, the possibility of using staphylococcal surfacedisplay and flow cytometric cell sorting also for specificenrichment of very rare target cells by multiple rounds ofcell-sorting and in between amplification was demonstrated.</p><p><b>Key words:</b>affibody, albumin binding protein, bacterialsurface display, cell immobilization, bioremediation,combinatorial protein engineering, flow cytometry,Gram-positive, metal binding, staphylococcal protein A,Staphylococcus carnosus, Staphylococcus xylosus, whole-celldevices</p>

Affinity proteins are invaluable tools in biotechnological and medical applications. This thesis is about combinatorial protein engineering principles for the generation of novel affinity proteins to purify mouse immunoglobulin, detect a potential cancer marker protein or inhibit a cell proliferation pathway. In a first study, ribosome display was for the first time applied to the selection of so-called affibody molecules, including the design of a ribosome display gene cassette, initial test enrichment experiments and the selection of binders against murine IgG1. One of the selected binders (ZMAB25) showed a highly selective binding profile to murine IgG1, which was exploited in the recovery of two different mouse monoclonal IgG1 antibodies from a bovine immunoglobulin-containing background. Ribosome display was further applied to the selection of affibody molecules binding to SATB1, a suggested marker protein for metastasizing adenocarcinoma. The study also included the selection of VHH antibody fragments from a naïve gene repertoire displayed on phage. Binders from both classes of protein scaffolds could be isolated that selectively recognized SATB1 but not its close homologue SATB2, and were used to detect endogenous SATB1 in Jurkat cells by immunofluorescence microscopy. The well-established phage display technology was used to select affibody molecules binding to H-Ras and Raf-1, both involved in the mitogen-activated protein kinase (MAPK) pathway and playing a central role in the control of cell proliferation, survival and differentiation. An isolated affibody molecule denoted ZRAF322 was found to selectively bind to Raf-1 and inhibit the interaction between H-Ras and Raf-1 in vitro. In a continued effort, ribosome display was applied to the affinity maturation of the ZRAF322 variant in a novel approach, based on repetitive cycles of diversification by error-prone PCR of the entire affibody gene and ribosome display selection, mimicking the principles of natural evolution. The method involved a monitoring of the progress of evolution and variants of ZRAF322 with 13- to 26-fold improved affinities were obtained, that contained different combinations of single or double amino acid substitutions in either previously randomized or framework positions. Implications of the substitutions for binder stability and selectivity were also investigated, showing that a higher affinity could be associated with a lower thermal melting point and that affinity-improved variants showed uncompromised binding selectivity to the hRaf-1 target. / QC 20110506