This research attempts to quantify the complex interactions between HVDC transmission schemes in a multi-infeed configuration, particularly with regard to the voltage interactions and the commutation failure phenomena. The in-depth analysis of multi-infeed HVDC systems discussed in this research shows the application of several indices such as the MIIF, MIESCR, and CFII, that can provide researchers and planning engineers in the area of HVDC transmission with the necessary tools for their system studies. It shows that these indices are applicable in a multi-infeed system comprising HVDC schemes with different ratings. The Multi-Infeed Interaction Factor (MIIF) quantifies the level of voltage interactions between converter ac buses. The Multi-Infeed Effective Short Circuit Ratio (MIESCR) index is an indicator of ac system strengths with regard to the assessment of the transient overvoltage (TOV) and the power-voltage stability of multi-infeed HVDC systems. The Commutation Failure Immunity Index (CFII) utilizes electromagnetic transient simulation programs to evaluate the immunity of an HVDC converter to commutation failures. The CFII takes into account the ac system strength and the HVDC controls and evaluates their impact on the commutation process. The immunity of both single-infeed and multi-infeed systems to commutation failure phenomena are accurately evaluated and quantified by the CFII. Using the CFII, it is shown that the current commutation in multi-infeed HVDC schemes could fail under circumstances in which the probability of failure had been perceived to be low. The causes of, the effects of, and the remedial actions needed to deal with such anomalous commutation failures are discussed in this thesis. The capability of the new indices to provide an insight into the interactions phenomena in multi-infeed systems are clearly demonstrated by examples that show their application in the analysis of an actual multi-infeed HVDC system that is in the planning phase in the province of Alberta in Canada.

This research attempts to quantify the complex interactions between HVDC transmission schemes in a multi-infeed configuration, particularly with regard to the voltage interactions and the commutation failure phenomena. The in-depth analysis of multi-infeed HVDC systems discussed in this research shows the application of several indices such as the MIIF, MIESCR, and CFII, that can provide researchers and planning engineers in the area of HVDC transmission with the necessary tools for their system studies. It shows that these indices are applicable in a multi-infeed system comprising HVDC schemes with different ratings. The Multi-Infeed Interaction Factor (MIIF) quantifies the level of voltage interactions between converter ac buses. The Multi-Infeed Effective Short Circuit Ratio (MIESCR) index is an indicator of ac system strengths with regard to the assessment of the transient overvoltage (TOV) and the power-voltage stability of multi-infeed HVDC systems. The Commutation Failure Immunity Index (CFII) utilizes electromagnetic transient simulation programs to evaluate the immunity of an HVDC converter to commutation failures. The CFII takes into account the ac system strength and the HVDC controls and evaluates their impact on the commutation process. The immunity of both single-infeed and multi-infeed systems to commutation failure phenomena are accurately evaluated and quantified by the CFII. Using the CFII, it is shown that the current commutation in multi-infeed HVDC schemes could fail under circumstances in which the probability of failure had been perceived to be low. The causes of, the effects of, and the remedial actions needed to deal with such anomalous commutation failures are discussed in this thesis. The capability of the new indices to provide an insight into the interactions phenomena in multi-infeed systems are clearly demonstrated by examples that show their application in the analysis of an actual multi-infeed HVDC system that is in the planning phase in the province of Alberta in Canada.

This thesis investigates the feasibility of hybrid converter based arrangements for High Voltage direct current (HVdc) transmission systems. The conventional HVdc transmission systems, which use Line Commutated Converter (LCC) technology, require ac voltage and large amounts of reactive power to operate; Voltage-Sourced Converter (VSC) based HVdc schemes, on the other hand, while maintaining most of the advantages of LCC-based systems, have overcome a number of disadvantages inherent to conventional LCC systems. Their ability to provide voltage support to very weak ac networks through generating reactive power, while delivering real power, makes them an ideal option for providing reliable power to remote locations. These converters suffer disadvantages such as higher costs, sensitivity to dc-side faults, and smaller ratings in comparison to conventional converters. This research exploits a new approach and introduces a hybrid configuration of VSC and LCC converters. The hybrid converter combines the advantages of these two converter types, while trying to stay far from their disadvantages. The thesis investigates and discusses the benefits of using VSC-LCC hybrid converters for HVdc transmission systems in stations where support of ac voltage is mostly absent (very weak ac system). It concludes that Series Hybrid Converter (SHC) configuration is a promising option for very weak ac system applications comparing to Parallel Hybrid Converter (PHC) option. Using simplified mathematical models and extensive effort on digital time simulation with PSCAD / EMTDC program, the technical feasibility of implementing SHC has been demonstrated.

This thesis investigates the feasibility of hybrid converter based arrangements for High Voltage direct current (HVdc) transmission systems. The conventional HVdc transmission systems, which use Line Commutated Converter (LCC) technology, require ac voltage and large amounts of reactive power to operate; Voltage-Sourced Converter (VSC) based HVdc schemes, on the other hand, while maintaining most of the advantages of LCC-based systems, have overcome a number of disadvantages inherent to conventional LCC systems. Their ability to provide voltage support to very weak ac networks through generating reactive power, while delivering real power, makes them an ideal option for providing reliable power to remote locations. These converters suffer disadvantages such as higher costs, sensitivity to dc-side faults, and smaller ratings in comparison to conventional converters. This research exploits a new approach and introduces a hybrid configuration of VSC and LCC converters. The hybrid converter combines the advantages of these two converter types, while trying to stay far from their disadvantages. The thesis investigates and discusses the benefits of using VSC-LCC hybrid converters for HVdc transmission systems in stations where support of ac voltage is mostly absent (very weak ac system). It concludes that Series Hybrid Converter (SHC) configuration is a promising option for very weak ac system applications comparing to Parallel Hybrid Converter (PHC) option. Using simplified mathematical models and extensive effort on digital time simulation with PSCAD / EMTDC program, the technical feasibility of implementing SHC has been demonstrated.

The Brazilian transmission system covers a large area, with a high concentration of consumer centres in the Southeast region and abundant hydro generation in the North. To connect these regions, some of the transmission lines might reach 2500 km length, creating a challenging situation. In this context, system planners have been defining the use of HVDC systems as the most feasible choice of transmission investment. It is so, recognized that the connections of power plants in the Northern region to the load centres in the Southeast will require a significant number of bipoles and, until the present moment, all the operational and planned HVDC lines are based on the converter technology known as LCC (Line Commutated Converter) and consequently subject to commutation failure. Currently, the Brazilian system has four LCC bipoles, with two other bipoles under construction. Although the Southeast grid is strong, the connection of two additional bipoles is a concern as the interaction between these inverters may cause strong effects on one another, a phenomenon known as multi-infeed interaction. In such a situation, the assessment of the system operation, possible outages and possible mitigation methods are of paramount importance. This document presents a different methodology for the analysis of the multi-infeed system mentioned and focuses on its validation by analysing operation under normal conditions and with the implementation of established mitigation methods. The investigation was carried out with EMT, power flow, short-circuit and electromechanical softwares in a very large AC system composed by 100 buses on EMT and full Brazilian system on the rest. The effects of faults were analysed and the areas containing the buses where a fault leads to multiple commutation failures were identified. / O sistema de brasileiro de transmissão abrange uma área ampla, com uma alta concentração de consumo na região Sudeste e abundante geração hidrelétrica no Norte. Para conectar essas regiões, algumas das linhas de transmissão podem alcançar comprimentos de 2500 km, criando uma situação desafiadora. Neste contexto, os planejadores de sistemas têm definido o uso de sistemas HVDC como a escolha mais viável de investimento em transmissão. É então reconhecido que as conexões de usinas na região Norte aos centros consumidores no Sudeste exigirão um número significativo de bipolos e, até o momento presente, todas as linhas HVDC operacionais e planejadas são baseadas na tecnologia de conversão conhecida como LCC (Line Commutated Converter) e consequentemente sujeito a falha de comutação. Atualmente, o sistema brasileiro tem quatro bipolos LCC, com outros dois bipolos em construção. Embora a rede do Sudeste seja considerada forte, a conexão de dois bipolos adicionais é uma preocupação, pois a interação entre esses inversores pode causar efeitos danosos uns sobre os outros, um fenômeno conhecido como interação multi-infeed. Em tal situação, a avaliação da operação do sistema, possíveis interrupções e possíveis métodos de mitigação são de suma importância. Este documento apresenta uma metodologia diferente para a análise do sistema multi-infeed mencionado e foca em sua validação, analisando a operação em condições normais e com a implementação de métodos de mitigação conhecidos. A investigação foi realizada com softwares EMT, de curto circuito, fluxo de potência e estabilidade eletromecância em um sistema CA muito grande composto por 100 barras em EMT e sistema brasileiro completo no resto. Os efeitos das falhas foram analisados e as áreas que contêm as barras onde uma falha leva a múltiplas falhas de comutação foram identificadas.

The Brazilian transmission system covers a large area, with a high concentration of consumer centres in the Southeast region and abundant hydro generation in the North. To connect these regions, some of the transmission lines might reach 2500 km length, creating a challenging situation. In this context, system planners have been defining the use of HVDC systems as the most feasible choice of transmission investment. It is so, recognized that the connections of power plants in the Northern region to the load centres in the Southeast will require a significant number of bipoles and, until the present moment, all the operational and planned HVDC lines are based on the converter technology known as LCC (Line Commutated Converter) and consequently subject to commutation failure. Currently, the Brazilian system has four LCC bipoles, with two other bipoles under construction. Although the Southeast grid is strong, the connection of two additional bipoles is a concern as the interaction between these inverters may cause strong effects on one another, a phenomenon known as multi-infeed interaction. In such a situation, the assessment of the system operation, possible outages and possible mitigation methods are of paramount importance. This document presents a different methodology for the analysis of the multi-infeed system mentioned and focuses on its validation by analysing operation under normal conditions and with the implementation of established mitigation methods. The investigation was carried out with EMT, power flow, short-circuit and electromechanical softwares in a very large AC system composed by 100 buses on EMT and full Brazilian system on the rest. The effects of faults were analysed and the areas containing the buses where a fault leads to multiple commutation failures were identified. / O sistema de brasileiro de transmissão abrange uma área ampla, com uma alta concentração de consumo na região Sudeste e abundante geração hidrelétrica no Norte. Para conectar essas regiões, algumas das linhas de transmissão podem alcançar comprimentos de 2500 km, criando uma situação desafiadora. Neste contexto, os planejadores de sistemas têm definido o uso de sistemas HVDC como a escolha mais viável de investimento em transmissão. É então reconhecido que as conexões de usinas na região Norte aos centros consumidores no Sudeste exigirão um número significativo de bipolos e, até o momento presente, todas as linhas HVDC operacionais e planejadas são baseadas na tecnologia de conversão conhecida como LCC (Line Commutated Converter) e consequentemente sujeito a falha de comutação. Atualmente, o sistema brasileiro tem quatro bipolos LCC, com outros dois bipolos em construção. Embora a rede do Sudeste seja considerada forte, a conexão de dois bipolos adicionais é uma preocupação, pois a interação entre esses inversores pode causar efeitos danosos uns sobre os outros, um fenômeno conhecido como interação multi-infeed. Em tal situação, a avaliação da operação do sistema, possíveis interrupções e possíveis métodos de mitigação são de suma importância. Este documento apresenta uma metodologia diferente para a análise do sistema multi-infeed mencionado e foca em sua validação, analisando a operação em condições normais e com a implementação de métodos de mitigação conhecidos. A investigação foi realizada com softwares EMT, de curto circuito, fluxo de potência e estabilidade eletromecância em um sistema CA muito grande composto por 100 barras em EMT e sistema brasileiro completo no resto. Os efeitos das falhas foram analisados e as áreas que contêm as barras onde uma falha leva a múltiplas falhas de comutação foram identificadas.