Spelling suggestions: "subject:"componentbased design"" "subject:"components.based design""
1 |
Systèmes à base de composants : du design à l'implémentation / Component-based systems : from design to implementationBen Hafaiedh, Imane 03 February 2011 (has links)
Dans cette thèse, nous nous sommes intéressés aux design, vérification et implémentation des systèmes à base de composants. Nous proposons d'abord une méthodologie de design et de vérification compositionelle et incrémentale à base de contrats pour les systèmes de composants. Nous proposons ensuite une implémentation distribuée qui permet de préserver certaines properiétés globales de ces systèmes. La méthodologie de design proposée utilise les contrats comme un moyen de contraindre, raffiner et d'implémenter les systèmes. Elle est basée sur un formalisme de contracts générique, que nous instancions pour un formalisme de composants permettant la description des propriétés de progrés. Nous étendons cette méthodologie pour raisonner sur des systèmes de taille arbitraire et nous prouvons son utilité pour vérifier des propriétés de sûreté et de progrés d'un réseau de noeuds distribués. Dans le contexte des systèmes distribués, les systèmes doivent être implémenter de manière distribuée. Nous proposons dans cette thèse un protocole qui permet l'exécution distribuée des systèmes tout en préservant certaines propriétés globales à savoir des synchronisations et des priorités et où les composants interagissent par échange de messages. Nous proposons également une implémentation du protocole pour une plateforme particulière. / The goal of the thesis is to provide theory, methods and tools for the design and implementation of component-based systems. To master the complexity of systems of components, we first propose a contract-based design and verification approach which is both compositional and incremental. Then we provide a distributed implementation of these systems allowing to preserve some global properties. The proposed verification approach uses contracts as a means to constrain, refine and implement systems. It is based on a generic contract framework that we instantiate for a component framework allowing to express progress properties. We also extend the approach to reason about systems of arbitrary size and we show its usefulness for proving safety and progress properties in networked systems. In the context of distributed settings, these systems must later be executed in a distributed fashion. We also propose in this thesis a protocol that allows executing systems in a distributed way while preserving some global requirements namely priorities and synchronizations and where components interact by message exchange. Then, we provide an implementation of this protocol in a particular platform.
|
2 |
Development of a toolkit for component-based automation systemsMcLeod, Charles S. January 2013 (has links)
From the earliest days of mass production in the automotive industry there has been a progressive move towards the use of flexible manufacturing systems that cater for product variants that meet market demands. In recent years this market has become more demanding with pressures from legislation, globalisation and increased customer expectations. This has lead to the current trends of mass customisation in production. In order to support this manufacturing systems are not only becoming more flexible† to cope with the increased product variants, but also more agile‡ such that they may respond more rapidly to market changes. Modularisation§ is widely used to increase the agility of automation systems, such that they may be more readily reconfigured¶. Also with globalisation into India and Asia semi-automatic machines (machines that interact with human operators) are more frequently used to reduce capital outlay and increase flexibility. There is an increasing need for tools and methodologies that support this in order to improve design robustness, reduce design time and gain a competitive edge in the market. The research presented in this thesis is built upon the work from COMPAG/COMPANION (COMponent- based Paradigm for AGile automation, and COmmon Model for PArtNers in automatION), and as part of the BDA (Business Driven Automation), SOCRADES (Service Oriented Cross-layer infrastructure for Distributed smart Embedded deviceS), and IMC-AESOP (ArchitecturE for Service- Oriented Process – monitoring and control) projects conducted at Loughborough University UK. This research details the design and implementation of a toolkit for building and simulating automation systems comprising components with behaviour described using Finite State Machines (FSM). The research focus is the development of the engineering toolkit that can support the automation system lifecycle from initial design through commissioning to maintenance and reconfiguration as well as the integration of a virtual human. This is achieved using a novel data structure that supports component definitions for control, simulation, maintenance and the novel integration of a virtual human into the automation system operation.
|
3 |
Component-Based Design and Service-Oriented Architectures in Software-Defined RadioHilburn, Benjamin Cantrell 17 May 2011 (has links)
Software-Defined Radio (SDR) is a large field of research, and is rapidly expanding in terms of capabilities and applications. As the number of SDR platforms, deployments, and use-cases grow, interoperability, compatibility, and software re-use becomes more difficult. Additionally, advanced SDR applications require more advanced hardware and software platforms to support them, necessitating intelligent management of resources and functionality. Realizing these goals can be done using the paradigms of Component-Based Design (CBD) and Service-Oriented Architectures (SOAs).
Component-based design has been applied to the field of SDR in the past to varying levels of success. We discuss the benefits of CBD, and how to successfully use CBD for SDR. We assert that by strictly enforcing the principles of CBD, we can achieve a high level of independence from both the hardware and software platforms, and enable component compatibility and interoperability between SDR platforms and deployments. Using CBD, we also achieve the use-case of a fully distributed SDR, where multiple hardware nodes act as one cohesive radio unit.
Applying the concept of service-orientation to SDR is a novel idea, and we discuss how this enables a new radio paradigm in the form of goal-oriented autonomic radios. We define SOAs in the context of SDR, explain how our vision is different than middle-wares like CORBA, describe how SOAs can be used, and discuss the possibilities of autonomic radio systems.
This thesis also presents our work on the Cognitive Radio Open Source Systems (CROSS) project. CROSS is a free and open-source prototype architecture that uses CBD to achieve platform independence and distributed SDR deployments. CROSS also provides an experimental system for using SOAs in SDRs. Using our reference implementation of CROSS, we successfully demonstrated a distributed cognitive radio performing dynamic spectrum access to communicate with another SDR while avoiding an interferer operating in the spectrum. / Master of Science
|
4 |
A component-based approach to design and construction of change capable manufacturing cell control systemsMonfared, Radmehr Pourtafreshi January 2000 (has links)
Business goals of manufacturing systems are typically in a state of constant change and greater rates of change are predicted in the future. Whereas contemporary approaches to the design and construction of these systems often results in inflexible enterprises that cannot readily be tuned to changing business goals. This study has specified and prototyped the use of a new model-driven approach to the design and (re)configuration of"change capable" manufacturing cells. Manufacturing cells represent a typical domain of manufacturing systems in which the existence of inflexible links between tasks and resources can result in sub-optimal performance and an inability to cope with change. The approach is based on a) the use of a semi-generic model of manufacturing cells, that structures and targets the use of CIMOSA modelling constructs (as implemented by the SEWOSA tool) towards producing a requirements specification and conceptual design in the form of a graphical and computer executable model of a particular manufacturing cell, and b) the complementary use of new computer executable modelling constructs and tools, that structure and support the detailed design and runtime operation of a particular cell in the form of an explicit, model-based configuration of cell resources and software components that realise the control processes required in a particular cell. Part of the semi-generic model comprises descriptions of common tasks found in a given domain of manufacturing cells. That part of the model has been captured and formalised by using CIMOSA modelling constructs. A new development of this modelling structure allows pre- modelled tasks to be selected, detailed and organised and suitable resources and reusable control system components (or building blocks) assigned to groups of tasks. Thereby this new approached to designing and building manufacturing cells can facilitate rapid and effective design and reconfiguration of manufacturing cell control systems. General information requirements found during the modelling and real world application of target cells, have also been formally defined and are met by using a suitable modelling structure and specially developed tools. Furthermore, the research has shown how modelled sets of software component building blocks can be specified and implemented as modular, reusable elements of manufacturing cell control systems. New modelling structures have been conceived and fonnalised and examples of their use evaluated under laboratory conditions. The research has also deployed and developed pre-existing enterprise modelling concepts and integration tools, including CIMOSA, STEP, EXPRESS, CIMBIOSYS infrastructure services and component-based software design concepts. This has enable the creation of a prototype tool-set that demonstrates how the concepts can be beneficially applied. The main contributions made by this research are that: a) It proposes and develops an approach to the design of manufacturing cell systems that successfully bridges a previous gap between top-down modelling concepts, methods and tools (that typically support formal modelling of system requirements, tasks and resources) and bottom-up detailed design and build techniques that lead to the operation, control and monitoring of real cells, b) It provides a modelling and implementation structure that 'integrates' the use of a classical enterprise modelling approach (namely CIMOSA), design primarily to support the designers of manufacturing systems, to the emerging component-based design and build concepts, that are becoming popular with software and system vendors.
|
5 |
Component based design and digital manufacturing: a design for manufacturing model for curved surfaces fabrication using three axes computer numerical controlled routerLyon, Eduardo 17 May 2007 (has links)
This thesis explores new ways to integrate manufacturing processes information in to design phases. Through the use of design for manufacturing (DfM) concept, and looking at relations between its potential application in architectural production and its implementation using digital manufacturing technologies, the author implemented a DfM model that varies from previous models by incorporated learning in the process. This process was based on the incremental development and refinement of design heuristics and metrics.
The DfM model developed in this research is a process model to be implemented as a framework within educational settings. The proposed model is based in two basic strategies; first a process description in the form of alternative design strategies; and second, the implementation of design heuristics and design metrics. Subsequently, the author tested and refined the model using a sequence of case studies with students.
In the final stage, the research evaluated and further developed the DfM model in a component design case study. The general purpose in performing this case studies sequence was to test the proposed DfM model. The second objective was to refine the DfM model by capturing knowledge from the case studies.
As a summary, this research conceptualizes from this top-down development approach to create a design for manufacturing model that integrates design and construction in architecture, based on three possible applications fields; DfM teaching approaches development, design processes improvement; and DfM methods development.
The final purpose is to provide better foundational constructs for architectural education and to improve teaching approaches that integrate design and manufacturing.
|
6 |
Web service control of component-based agile manufacturing systemsPhaithoonbuathong, Punnuluk January 2009 (has links)
Current global business competition has resulted in significant challenges for manufacturing and production sectors focused on shorter product lifecyc1es, more diverse and customized products as well as cost pressures from competitors and customers. To remain competitive, manufacturers, particularly in automotive industry, require the next generation of manufacturing paradigms supporting flexible and reconfigurable production systems that allow quick system changeovers for various types of products. In addition, closer integration of shop floor and business systems is required as indicated by the research efforts in investigating "Agile and Collaborative Manufacturing Systems" in supporting the production unit throughout the manufacturing lifecycles. The integration of a business enterprise with its shop-floor and lifecycle supply partners is currently only achieved through complex proprietary solutions due to differences in technology, particularly between automation and business systems. The situation is further complicated by the diverse types of automation control devices employed. Recently, the emerging technology of Service Oriented Architecture's (SOA's) and Web Services (WS) has been demonstrated and proved successful in linking business applications. The adoption of this Web Services approach at the automation level, that would enable a seamless integration of business enterprise and a shop-floor system, is an active research topic within the automotive domain. If successful, reconfigurable automation systems formed by a network of collaborative autonomous and open control platform in distributed, loosely coupled manufacturing environment can be realized through a unifying platform of WS interfaces for devices communication. The adoption of SOA- Web Services on embedded automation devices can be achieved employing Device Profile for Web Services (DPWS) protocols which encapsulate device control functionality as provided services (e.g. device I/O operation, device state notification, device discovery) and business application interfaces into physical control components of machining automation. This novel approach supports the possibility of integrating pervasive enterprise applications through unifying Web Services interfaces and neutral Simple Object Access Protocol (SOAP) message communication between control systems and business applications over standard Ethernet-Local Area Networks (LAN's). In addition, the re-configurability of the automation system is enhanced via the utilisation of Web Services throughout an automated control, build, installation, test, maintenance and reuse system lifecycle via device self-discovery provided by the DPWS protocol.
|
7 |
Adaptive Middleware for Self-Configurable Embedded Real-Time Systems : Experiences from the DySCAS Project and Remaining ChallengesPersson, Magnus January 2009 (has links)
<p>Development of software for embedded real-time systems poses severalchallenges. Hard and soft constraints on timing, and usually considerableresource limitations, put important constraints on the development. Thetraditional way of coping with these issues is to produce a fully static design,i.e. one that is fully fixed already during design time.Current trends in the area of embedded systems, including the emergingopenness in these types of systems, are providing new challenges for theirdesigners – e.g. integration of new software during runtime, software upgradeor run-time adaptation of application behavior to facilitate better performancecombined with more ecient resource usage. One way to reach these goals is tobuild self-configurable systems, i.e. systems that can resolve such issues withouthuman intervention. Such mechanisms may be used to promote increasedsystem openness.This thesis covers some of the challenges involved in that development.An overview of the current situation is given, with a extensive review ofdi erent concepts that are applicable to the problem, including adaptivitymechanisms (incluing QoS and load balancing), middleware and relevantdesign approaches (component-based, model-based and architectural design).A middleware is a software layer that can be used in distributed systems,with the purpose of abstracting away distribution, and possibly other aspects,for the application developers. The DySCAS project had as a major goaldevelopment of middleware for self-configurable systems in the automotivesector. Such development is complicated by the special requirements thatapply to these platforms.Work on the implementation of an adaptive middleware, DyLite, providingself-configurability to small-scale microcontrollers, is described andcovered in detail. DyLite is a partial implementation of the concepts developedin DySCAS.Another area given significant focus is formal modeling of QoS andresource management. Currently, applications in these types of systems arenot given a fully formal definition, at least not one also covering real-timeaspects. Using formal modeling would extend the possibilities for verificationof not only system functionality, but also of resource usage, timing and otherextra-functional requirements. This thesis includes a proposal of a formalismto be used for these purposes.Several challenges in providing methodology and tools that are usablein a production development still remain. Several key issues in this areaare described, e.g. version/configuration management, access control, andintegration between di erent tools, together with proposals for future workin the other areas covered by the thesis.</p> / <p>Utveckling av mjukvara för inbyggda realtidssystem innebär flera utmaningar.Hårda och mjuka tidskrav, och vanligtvis betydande resursbegränsningar,innebär viktiga inskränkningar på utvecklingen. Det traditionellasättet att hantera dessa utmaningar är att skapa en helt statisk design, d.v.s.en som är helt fix efter utvecklingsskedet.Dagens trender i området inbyggda system, inräknat trenden mot systemöppenhet,skapar nya utmaningar för systemens konstruktörer – exempelvisintegration av ny mjukvara under körskedet, uppgradering av mjukvaraeller anpassning av applikationsbeteende under körskedet för att nå bättreprestanda kombinerat med e ektivare resursutnyttjande. Ett sätt att nå dessamål är att bygga självkonfigurerande system, d.v.s. system som kan lösa sådanautmaningar utan mänsklig inblandning. Sådana mekanismer kan användas föratt öka systemens öppenhet.Denna avhandling täcker några av utmaningarna i denna utveckling. Enöversikt av den nuvarande situationen ges, med en omfattande genomgångav olika koncept som är relevanta för problemet, inklusive anpassningsmekanismer(inklusive QoS och lastbalansering), mellanprogramvara och relevantadesignansatser (komponentbaserad, modellbaserad och arkitekturell design).En mellanprogramvara är ett mjukvarulager som kan användas i distribueradesystem, med syfte att abstrahera bort fördelning av en applikation överett nätverk, och möjligtvis även andra aspekter, för applikationsutvecklarna.DySCAS-projektet hade utveckling av mellanprogramvara för självkonfigurerbarasystem i bilbranschen som ett huvudmål. Sådan utveckling försvåras avde särskilda krav som ställs på dessa plattformarArbete på implementeringen av en adaptiv mellanprogramvara, DyLite,som tillhandahåller självkonfigurerbarhet till småskaliga mikrokontroller,beskrivs och täcks i detalj. DyLite är en delvis implementering av konceptensom utvecklats i DySCAS.Ett annat område som får särskild fokus är formell modellering av QoSoch resurshantering. Idag beskrivs applikationer i dessa områden inte heltformellt, i varje fall inte i den mån att realtidsaspekter täcks in. Att användaformell modellering skulle utöka möjligheterna för verifiering av inte barasystemfunktionalitet, men även resursutnyttjande, tidsaspekter och andraicke-funktionella krav. Denna avhandling innehåller ett förslag på en formalismsom kan användas för dessa syften.Det återstår många utmaningar innan metodik och verktyg som är användbarai en produktionsmiljö kan erbjudas. Många nyckelproblem i områdetbeskrivs, t.ex. versions- och konfigurationshantering, åtkomststyrning ochintegration av olika verktyg, tillsammans med förslag på framtida arbete iövriga områden som täcks av avhandlingen.</p> / DySCAS
|
8 |
A service-oriented approach to embedded component-based manufacturing automationKaur, Navjot January 2012 (has links)
This thesis is focused on the application of Component-Based (CB) technology to shop floor devices using a Service Oriented Architecture (SOA) and Web Services (WS) for the purpose of realising future generation agile manufacturing systems. The environment of manufacturing enterprises is now characterised by frequently changing market demands, time-to-market pressure, continuously emerging new technologies and global competition. Under these circumstances, manufacturing systems need to be agile and automation systems need to support this agility. More specifically, an open, exible automation environment with plug and play connectivity is needed. Technically, this requires the easy connectivity of hardware devices and software components from different vendors. Functionally, there is a need of interoperability and integration of control functions on different hierarchical levels ranging from field level to various higher level applications such as process control and operations management services. A potential solution is to realise a modular and reconfigurable automation system, based on a platform of reusable components; while simultaneously reducing the number of unique components. For designing such reusable components, a component-based technology has been used in current thesis. The automation components created are active and distributed entities interacting through their data, event and service ports. To communicate these entities, this thesis focuses on applying SOA and WS at device level. SOA and WS have already been proven successful in linking business applications. If SOA can be applied at shop floor using the embedded devices, it can enable entirely new automation architecture based on peer-to-peer interactions between autonomous devices. The adoption of this SOA-WS approach at shop floor level would enable a seamless integration of higher level business applications and shop- floor level system. This will also provide a loosely coupled message-oriented service in embedded device networks and geographically distributed automation system. SOA can be implemented using Web Services on the embedded devices, which will provide even greater exibility and interoperability because WS is platform neutral. This SOA-WS approach will enable end users to operate and maintain the supplied system easily. A key aim of this thesis is to examine if the adoption of SOA-WS at the embedded control devices can provide the same level of message speed and reliability as the current control systems. It is expected that the desired distributed, loosely coupled and reconfigurable automation system can be formed by a network of these collaborative autonomous SOA-WS based devices using an open control platform. This approach has been experimentally evaluated both in terms of quantity and quality using various parameters involved in the design, implementation, evaluation and recon guration of SOA-WS based automation systems. This has been done using the Ford Festo test rig located at the Manufacturing System Integration Research Institute of Loughborough University. The mechanisms on this test rig represent control problems typically associated in engine assembly and handling machines. Therefore, the result of experimental studies performed on this test rig can be considered applicable to real manufacturing applications.
|
9 |
Rigorous System-level Modeling and Performance Evaluation for Embedded System Design / Modélisation et Évaluation de Performance pour la Conception des Systèmes Embarqués : Approche Rigoureuse au Niveau SystèmeNouri, Ayoub 08 April 2015 (has links)
Les systèmes embarqués ont évolué d'une manière spectaculaire et sont devenus partie intégrante de notre quotidien. En réponse aux exigences grandissantes en termes de nombre de fonctionnalités et donc de flexibilité, les parties logicielles de ces systèmes se sont vues attribuer une place importante malgré leur manque d'efficacité, en comparaison aux solutions matérielles. Par ailleurs, vu la prolifération des systèmes nomades et à ressources limités, tenir compte de la performance est devenu indispensable pour bien les concevoir. Dans cette thèse, nous proposons une démarche rigoureuse et intégrée pour la modélisation et l'évaluation de performance tôt dans le processus de conception. Cette méthode permet de construire des modèles, au niveau système, conformes aux spécifications fonctionnelles, et intégrant les contraintes non-fonctionnelles de l'environnement d'exécution. D'autre part, elle permet d'analyser quantitativement la performance de façon rapide et précise. Cette méthode est guidée par les modèles et se base sur le formalisme $mathcal{S}$BIP que nous proposons pour la modélisation stochastique selon une approche formelle et par composants. Pour construire des modèles conformes au niveau système, nous partons de modèles purement fonctionnels utilisés pour générer automatiquement une implémentation distribuée, étant donnée une architecture matérielle cible et un schéma de répartition. Dans le but d'obtenir une description fidèle de la performance, nous avons conçu une technique d'inférence statistique qui produit une caractérisation probabiliste. Cette dernière est utilisée pour calibrer le modèle fonctionnel de départ. Afin d'évaluer la performance de ce modèle, nous nous basons sur du model checking statistique que nous améliorons à l'aide d'une technique d'abstraction. Nous avons développé un flot de conception qui automatise la majorité des phases décrites ci-dessus. Ce flot a été appliqué à différentes études de cas, notamment à une application de reconnaissance d'image déployée sur la plateforme multi-cœurs STHORM. / In the present work, we tackle the problem of modeling and evaluating performance in the context of embedded systems design. These have become essential for modern societies and experienced important evolution. Due to the growing demand on functionality and programmability, software solutions have gained in importance, although known to be less efficient than dedicated hardware. Consequently, considering performance has become a must, especially with the generalization of resource-constrained devices. We present a rigorous and integrated approach for system-level performance modeling and analysis. The proposed method enables faithful high-level modeling, encompassing both functional and performance aspects, and allows for rapid and accurate quantitative performance evaluation. The approach is model-based and relies on the $mathcal{S}$BIP formalism for stochastic component-based modeling and formal verification. We use statistical model checking for analyzing performance requirements and introduce a stochastic abstraction technique to enhance its scalability. Faithful high-level models are built by calibrating functional models with low-level performance information using automatic code generation and statistical inference. We provide a tool-flow that automates most of the steps of the proposed approach and illustrate its use on a real-life case study for image processing. We consider the design and mapping of a parallel version of the HMAX models algorithm for object recognition on the STHORM many-cores platform. We explored timing aspects and the obtained results show not only the usability of the approach but also its pertinence for taking well-founded decisions in the context of system-level design.
|
10 |
Rigorous System-level Modeling and Performance Evaluation for Embedded System Design / Modélisation et Évaluation de Performance pour la Conception des Systèmes Embarqués : Approche Rigoureuse au Niveau SystèmeNouri, Ayoub 08 April 2015 (has links)
Les systèmes embarqués ont évolué d'une manière spectaculaire et sont devenus partie intégrante de notre quotidien. En réponse aux exigences grandissantes en termes de nombre de fonctionnalités et donc de flexibilité, les parties logicielles de ces systèmes se sont vues attribuer une place importante malgré leur manque d'efficacité, en comparaison aux solutions matérielles. Par ailleurs, vu la prolifération des systèmes nomades et à ressources limités, tenir compte de la performance est devenu indispensable pour bien les concevoir. Dans cette thèse, nous proposons une démarche rigoureuse et intégrée pour la modélisation et l'évaluation de performance tôt dans le processus de conception. Cette méthode permet de construire des modèles, au niveau système, conformes aux spécifications fonctionnelles, et intégrant les contraintes non-fonctionnelles de l'environnement d'exécution. D'autre part, elle permet d'analyser quantitativement la performance de façon rapide et précise. Cette méthode est guidée par les modèles et se base sur le formalisme $mathcal{S}$BIP que nous proposons pour la modélisation stochastique selon une approche formelle et par composants. Pour construire des modèles conformes au niveau système, nous partons de modèles purement fonctionnels utilisés pour générer automatiquement une implémentation distribuée, étant donnée une architecture matérielle cible et un schéma de répartition. Dans le but d'obtenir une description fidèle de la performance, nous avons conçu une technique d'inférence statistique qui produit une caractérisation probabiliste. Cette dernière est utilisée pour calibrer le modèle fonctionnel de départ. Afin d'évaluer la performance de ce modèle, nous nous basons sur du model checking statistique que nous améliorons à l'aide d'une technique d'abstraction. Nous avons développé un flot de conception qui automatise la majorité des phases décrites ci-dessus. Ce flot a été appliqué à différentes études de cas, notamment à une application de reconnaissance d'image déployée sur la plateforme multi-cœurs STHORM. / In the present work, we tackle the problem of modeling and evaluating performance in the context of embedded systems design. These have become essential for modern societies and experienced important evolution. Due to the growing demand on functionality and programmability, software solutions have gained in importance, although known to be less efficient than dedicated hardware. Consequently, considering performance has become a must, especially with the generalization of resource-constrained devices. We present a rigorous and integrated approach for system-level performance modeling and analysis. The proposed method enables faithful high-level modeling, encompassing both functional and performance aspects, and allows for rapid and accurate quantitative performance evaluation. The approach is model-based and relies on the $mathcal{S}$BIP formalism for stochastic component-based modeling and formal verification. We use statistical model checking for analyzing performance requirements and introduce a stochastic abstraction technique to enhance its scalability. Faithful high-level models are built by calibrating functional models with low-level performance information using automatic code generation and statistical inference. We provide a tool-flow that automates most of the steps of the proposed approach and illustrate its use on a real-life case study for image processing. We consider the design and mapping of a parallel version of the HMAX models algorithm for object recognition on the STHORM many-cores platform. We explored timing aspects and the obtained results show not only the usability of the approach but also its pertinence for taking well-founded decisions in the context of system-level design.
|
Page generated in 0.3986 seconds