Ce travail est dédié à l'analyse, la conception et l'évaluation des performances des schémas de codage de réseaux pour les systèmes des communications multi-terminaux. Nous étudions en premier lieu le protocole « compute-and-forward » dans le canal à accès multiples. Nous proposons un critère de construction de codes de réseaux efficaces pour cette stratégie basé sur la résolution d'un problème du vecteur le plus court d'un réseau de points. En addition, nous développons de nouveaux algorithmes de décodage prouvés numériquement plus performants que le décodeur existant du CF. La deuxième partie concerne l'implémentation du protocole CF dans le canal à relais bidirectionnel et le canal à sources et relais multiples. Nous développons des algorithmes de construction de schémas de codage pour le CF et évaluons théoriquement et par simulations numériques leurs performances. La dernière partie concerne le canal MIMO distribué et en particulier une nouvelle architecture de décodeurs « integer forcing » inspirés par le protocole CF. Nous proposons de nouveaux algorithmes de construction des paramètres optimaux de ces décodeurs et montrons par simulations qu'ils apportent un gain significatif par rapport aux récepteurs linéaires existants / This work is dedicated to the analysis, design and performance evaluation of physical layer network coding strategies in multiuser communication systems. The first part is devoted to study the compute-and-forward protocol in the basic multiple access channel. For this strategy, we propose an optimal solution to design efficient network codes based on solving a lattice shortest vector problem. Moreover, we derive novel bounds on the ergodic rate and the outage probability for the CF operating in fast and slow fading channels respectively. Besides, we develop novel decoding algorithms proved numerically to outperform the traditional decoding scheme for the CF. The second part is dedicated to the design and end-to-end performance evaluation of network codes for the CF and the analog network coding in the two-way relay channel and the multi-source multi-relay channel. For each network model we study the decoding at the relay nodes and the end destination, propose search algorithms for optimal network codes for the CF and evaluate, theoretically and numerically, the end-to-end error rate and achievable transmission rate. In the last part, we study new decoders for the distributed MIMO channel termed integer forcing (if). Inspired by the CF, if receivers take advantage of the interference provided by the wireless medium to decode integer linear combinations of the original codewords. We develop in our work efficient algorithms to select optimal if receivers parameters allowing to outperform existing suboptimal linear receivers

Next-generation wireless communication systems will need to contend with many active mobile devices, each of which will require a very high data rate. To cope with this growing demand, network deployments are becoming denser, leading to higher interference between active users. Conventional architectures aim to mitigate this interference through careful design of signaling and scheduling protocols. Unfortunately, these methods become less effective as the device density increases. One promising option is to enable cellular basestations (i.e., cell towers) to jointly process their received signals for decoding users’ data packets as well as to jointly encode their data packets to the users. This joint processing architecture is often enabled by a cloud radio access network that links the basestations to a central processing unit via dedicated connections. One of the main contributions of this thesis is a novel end-to-end communications architecture for cloud radio access networks as well as a detailed comparison to prior approaches, both via theoretical bounds and numerical simulations. Recent work has that the following high-level approach has numerous advantages: each basestation quantizes its observed signal and sends it to the central processing unit for decoding, which in turn generates signals for the basestations to transmit, and sends them quantized versions. This thesis follows an integer-forcing approach that uses the fact that, if codewords are drawn from a linear codebook, then their integer-linear combinations are themselves codewords. Overall, this architecture requires integer-forcing channel coding from the users to the central processing unit and back, which handles interference between the users’ codewords, as well as integer-forcing source coding from the basestations to the central processing unit and back, which handles correlations between the basestations’ analog signals. Prior work on integer-forcing has proposed and analyzed channel coding strategies as well as a source coding strategy for the basestations to the central processing unit, and this thesis proposes a source coding strategy for the other direction. Iterative algorithms are developed to optimize the parameters of the proposed architecture, which involve real-valued beamforming and equalization matrices and integer-valued coefficient matrices in a quadratic objective. Beyond the cloud radio setting, it is argued that the integer-forcing approach is a promising framework for interference alignment between multiple transmitter-receiver pairs. In this scenario, the goal is to align the interfering data streams so that, from the perspective of each receiver, there seems to be only a signal receiver. Integer-forcing interference alignment accomplishes this objective by having each receiver recover two linear combinations that can then be solved for the desired signal and the sum of the interference. Finally, this thesis investigates the impact of channel coherence on the integer-forcing strategy via numerical simulations.

In this thesis, we investigate physical-layer network coding in an L × M × K relay network, where L source nodes want to transmit messages to K sink nodes via M relay nodes. We focus on the information processing at the relay nodes and the compute-and-forward framework. Nested lattice codes are used, which have the property that every linear combination of codewords is a valid codeword. This property is essential for physical-layer network coding. Because the actual network coding occurs on the physical layer, the network coding coefficients are determined by the channel realizations. Finding the optimal network coding coefficients for given channel realizations is a non-trivial optimization problem. In this thesis, we provide an algorithm to find network coding coefficients that result in the highest data rate at a chosen relay. The solution of this optimization problem is only locally optimal, i.e., it is optimal for a particular relay. If we consider a multi-hop network, each potential receiver must get enough linear independent combinations to be able to decode the individual messages. If this is not the case, outage occurs, which results in data loss. In this thesis, we propose a new strategy for choosing the network coding coefficients locally at the relays without solving the optimization problem globally. We thereby reduce the solution space for the relays such that linear independence between their decoded linear combinations is guaranteed. Further, we discuss the influence of spatial correlation on the optimization problem. Having solved the optimization problem, we combine physical-layer network coding with physical-layer secrecy. This allows us to propose a coding scheme to exploit untrusted relays in multi-user relay networks. We show that physical-layer network coding, especially compute-and-forward, is a key technology for simultaneous and secure communication of several users over an untrusted relay. First, we derive the achievable secrecy rate for the two-way relay channel. Then, we enhance this scenario to a multi-way relay channel with multiple antennas. We describe our implementation of the compute-and-forward framework with software-defined radio and demonstrate the practical feasibility. We show that it is possible to use the framework in real-life scenarios and demonstrate a transmission from two users to a relay. We gain valuable insights into a real transmission using the compute-and-forward framework. We discuss possible improvements of the current implementation and point out further work. / In dieser Arbeit untersuchen wir Netzwerkcodierung auf der Übertragungsschicht in einem Relay-Netzwerk, in dem L Quellen-Knoten Nachrichten zu K Senken-Knoten über M Relay-Knoten senden wollen. Der Fokus dieser Arbeit liegt auf der Informationsverarbeitung an den Relay-Knoten und dem Compute-and-Forward Framework. Es werden Nested Lattice Codes eingesetzt, welche die Eigenschaft besitzen, dass jede Linearkombination zweier Codewörter wieder ein gültiges Codewort ergibt. Dies ist eine Eigenschaft, die für die Netzwerkcodierung von entscheidender Bedeutung ist. Da die eigentliche Netzwerkcodierung auf der Übertragungsschicht stattfindet, werden die Netzwerkcodierungskoeffizienten von den Kanalrealisierungen bestimmt. Das Finden der optimalen Koeffizienten für gegebene Kanalrealisierungen ist ein nicht-triviales Optimierungsproblem. Wir schlagen in dieser Arbeit einen Algorithmus vor, welcher Netzwerkcodierungskoeffizienten findet, die in der höchsten Übertragungsrate an einem gewählten Relay resultieren. Die Lösung dieses Optimierungsproblems ist zunächst nur lokal, d. h. für dieses Relay, optimal. An jedem potentiellen Empfänger müssen ausreichend unabhängige Linearkombinationen vorhanden sein, um die einzelnen Nachrichten decodieren zu können. Ist dies nicht der Fall, kommt es zu Datenverlusten. Um dieses Problem zu umgehen, ohne dabei das Optimierungsproblem global lösen zu müssen, schlagen wir eine neue Strategie vor, welche den Lösungsraum an einem Relay soweit einschränkt, dass lineare Unabhängigkeit zwischen den decodierten Linearkombinationen an den Relays garantiert ist. Außerdem diskutieren wir den Einfluss von räumlicher Korrelation auf das Optimierungsproblem. Wir kombinieren die Netzwerkcodierung mit dem Konzept von Sicherheit auf der Übertragungsschicht, um ein Übertragungsschema zu entwickeln, welches es ermöglicht, mit Hilfe nicht-vertrauenswürdiger Relays zu kommunizieren. Wir zeigen, dass Compute-and-Forward ein wesentlicher Baustein ist, um solch eine sichere und simultane Übertragung mehrerer Nutzer zu gewährleisten. Wir starten mit dem einfachen Fall eines Relay-Kanals mit zwei Nutzern und erweitern dieses Szenario auf einen Relay-Kanal mit mehreren Nutzern und mehreren Antennen. Die Arbeit wird abgerundet, indem wir eine Implementierung des Compute-and-Forward Frameworks mit Software-Defined Radio demonstrieren. Wir zeigen am Beispiel von zwei Nutzern und einem Relay, dass sich das Framework eignet, um in realen Szenarien eingesetzt zu werden. Wir diskutieren mögliche Verbesserungen und zeigen Richtungen für weitere Forschungsarbeit auf.

Les futures générations de réseaux sans fil posent beaucoup de défis pour la communauté de recherche. Notamment, ces réseaux doivent être en mesure de répondre, avec une certaine qualité de service, aux demandes d'un nombre important de personnes et d'objets connectés. Ce qui se traduit par des exigences assez importantes en termes de capacité. C'est dans ce cadre que les méthodes d'accès multiple non orthogonaux (NOMA) ont été introduit. Dans cette thèse, nous avons étudié et proposé une méthodes d'accès multiple basé sur la technique compute and forawrd et sur les réseaux de point (Lattice codes) tout en considérant différentes constructions de lattice. Nous avons également proposé des amélioration de l'algorithme de décodage de la méthode SCMA (Sparse code multiple access) basé sur les réseaux de points. Afin de simplifier les décodeurs multi-niveaux utilisés, nous avons proposé des expressions simplifiées de LLRs ainsi que des approximations. Finalement, nous avons étudié la construction D des lattices en utilisant les codes polaires. Cette thèse était en collaboration avec le centre de recherche de Huawei France. / Future generations of wireless networks pose many challenges for the research community. In particular, these networks must be able to respond, with a certain quality of service, to the demands of a large number of connected people and objects. This drives us into quite important requirements in terms of capacity. It is within this framework that non-orthogonal multiple access methods (NOMA) have been introduced. In this thesis, we have studied and proposed a multiple access method based on the compute and forward technique and on Lattice codes while considering different lattice constructions. We have also proposed improvements to the algorithm for decoding the Sparse code multiple access (SCMA) method based on Lattice codes. In order to simplify the multi-stage decoders used in here, we have proposed simplified expressions of LLRs as well as approximations. Finally, we studied the construction D of lattices using polar codes. This thesis was in collaboration with the research center of Huawei France.

In this thesis, we investigate physical-layer network coding in an L × M × K relay network, where L source nodes want to transmit messages to K sink nodes via M relay nodes. We focus on the information processing at the relay nodes and the compute-and-forward framework. Nested lattice codes are used, which have the property that every linear combination of codewords is a valid codeword. This property is essential for physical-layer network coding. Because the actual network coding occurs on the physical layer, the network coding coefficients are determined by the channel realizations. Finding the optimal network coding coefficients for given channel realizations is a non-trivial optimization problem. In this thesis, we provide an algorithm to find network coding coefficients that result in the highest data rate at a chosen relay. The solution of this optimization problem is only locally optimal, i.e., it is optimal for a particular relay. If we consider a multi-hop network, each potential receiver must get enough linear independent combinations to be able to decode the individual messages. If this is not the case, outage occurs, which results in data loss. In this thesis, we propose a new strategy for choosing the network coding coefficients locally at the relays without solving the optimization problem globally. We thereby reduce the solution space for the relays such that linear independence between their decoded linear combinations is guaranteed. Further, we discuss the influence of spatial correlation on the optimization problem. Having solved the optimization problem, we combine physical-layer network coding with physical-layer secrecy. This allows us to propose a coding scheme to exploit untrusted relays in multi-user relay networks. We show that physical-layer network coding, especially compute-and-forward, is a key technology for simultaneous and secure communication of several users over an untrusted relay. First, we derive the achievable secrecy rate for the two-way relay channel. Then, we enhance this scenario to a multi-way relay channel with multiple antennas. We describe our implementation of the compute-and-forward framework with software-defined radio and demonstrate the practical feasibility. We show that it is possible to use the framework in real-life scenarios and demonstrate a transmission from two users to a relay. We gain valuable insights into a real transmission using the compute-and-forward framework. We discuss possible improvements of the current implementation and point out further work. / In dieser Arbeit untersuchen wir Netzwerkcodierung auf der Übertragungsschicht in einem Relay-Netzwerk, in dem L Quellen-Knoten Nachrichten zu K Senken-Knoten über M Relay-Knoten senden wollen. Der Fokus dieser Arbeit liegt auf der Informationsverarbeitung an den Relay-Knoten und dem Compute-and-Forward Framework. Es werden Nested Lattice Codes eingesetzt, welche die Eigenschaft besitzen, dass jede Linearkombination zweier Codewörter wieder ein gültiges Codewort ergibt. Dies ist eine Eigenschaft, die für die Netzwerkcodierung von entscheidender Bedeutung ist. Da die eigentliche Netzwerkcodierung auf der Übertragungsschicht stattfindet, werden die Netzwerkcodierungskoeffizienten von den Kanalrealisierungen bestimmt. Das Finden der optimalen Koeffizienten für gegebene Kanalrealisierungen ist ein nicht-triviales Optimierungsproblem. Wir schlagen in dieser Arbeit einen Algorithmus vor, welcher Netzwerkcodierungskoeffizienten findet, die in der höchsten Übertragungsrate an einem gewählten Relay resultieren. Die Lösung dieses Optimierungsproblems ist zunächst nur lokal, d. h. für dieses Relay, optimal. An jedem potentiellen Empfänger müssen ausreichend unabhängige Linearkombinationen vorhanden sein, um die einzelnen Nachrichten decodieren zu können. Ist dies nicht der Fall, kommt es zu Datenverlusten. Um dieses Problem zu umgehen, ohne dabei das Optimierungsproblem global lösen zu müssen, schlagen wir eine neue Strategie vor, welche den Lösungsraum an einem Relay soweit einschränkt, dass lineare Unabhängigkeit zwischen den decodierten Linearkombinationen an den Relays garantiert ist. Außerdem diskutieren wir den Einfluss von räumlicher Korrelation auf das Optimierungsproblem. Wir kombinieren die Netzwerkcodierung mit dem Konzept von Sicherheit auf der Übertragungsschicht, um ein Übertragungsschema zu entwickeln, welches es ermöglicht, mit Hilfe nicht-vertrauenswürdiger Relays zu kommunizieren. Wir zeigen, dass Compute-and-Forward ein wesentlicher Baustein ist, um solch eine sichere und simultane Übertragung mehrerer Nutzer zu gewährleisten. Wir starten mit dem einfachen Fall eines Relay-Kanals mit zwei Nutzern und erweitern dieses Szenario auf einen Relay-Kanal mit mehreren Nutzern und mehreren Antennen. Die Arbeit wird abgerundet, indem wir eine Implementierung des Compute-and-Forward Frameworks mit Software-Defined Radio demonstrieren. Wir zeigen am Beispiel von zwei Nutzern und einem Relay, dass sich das Framework eignet, um in realen Szenarien eingesetzt zu werden. Wir diskutieren mögliche Verbesserungen und zeigen Richtungen für weitere Forschungsarbeit auf.

A wireless relay network consists of multiple source nodes, multiple destination nodes, and possibly many relay nodes in between to facilitate its transmission. It is clear that the performance of such networks highly depends on information for- warding strategies adopted at the relay nodes. This dissertation studies a particular information forwarding strategy called compute-and-forward. Compute-and-forward is a novel paradigm that tries to incorporate the idea of network coding within the physical layer and hence is often referred to as physical layer network coding. The main idea is to exploit the superposition nature of the wireless medium to directly compute or decode functions of transmitted signals at intermediate relays in a net- work. Thus, the coding performed at the physical layer serves the purpose of error correction as well as permits recovery of functions of transmitted signals. For the bidirectional relaying problem with Gaussian channels, it has been shown by Wilson et al. and Nam et al. that the compute-and-forward paradigm is asymptotically optimal and achieves the capacity region to within 1 bit; however, similar results beyond the memoryless case are still lacking. This is mainly because channels with memory would destroy the lattice structure that is most crucial for the compute-and-forward paradigm. Hence, how to extend compute-and-forward to such channels has been a challenging issue. This motivates this study of the extension of compute-and-forward to channels with memory, such as inter-symbol interference. The bidirectional relaying problem with parallel Gaussian channels is also studied, which is a relevant model for the Gaussian bidirectional channel with inter-symbol interference and that with multiple-input multiple-output channels. Motivated by the recent success of linear finite-field deterministic model, we first investigate the corresponding deterministic parallel bidirectional relay channel and fully characterize its capacity region. Two compute-and-forward schemes are then proposed for the Gaussian model and the capacity region is approximately characterized to within a constant gap. The design of coding schemes for the compute-and-forward paradigm with low decoding complexity is then considered. Based on the separation-based framework proposed previously by Tunali et al., this study proposes a family of constellations that are suitable for the compute-and-forward paradigm. Moreover, by using Chinese remainder theorem, it is shown that the proposed constellations are isomorphic to product fields and therefore can be put into a multilevel coding framework. This study then proposes multilevel coding for the proposed constellations and uses multistage decoding to further reduce decoding complexity.

Nous étudions un protocole de coopération dans les réseaux MIMO à deux sauts : le rotate-and-forward (RF). Dans ces réseaux, la source et la destination ne communiquent qu'à travers une couche de relais. Nous étudions la performance du protocole RF à partir d'une nouvelle métrique appelée gain de coupure. Ce gain nous permet de décrire le comportement de la probabilité de coupure à des valeurs du rapport signal à bruit moyennes et élevées. En utilisant le gain de coupure, nous comparons la performance du RF aux performances d'autres protocoles ayant le même ordre de diversité que le RF. Nous supposons aussi qu'une voie de retour existe entre la destination et les relais et nous donnons un algorithme qui permet d'améliorer les performances du RF en termes de probabilité de coupure en se basant sur la connaissance des gains du canal. Nous considérons un protocole de codage de réseaux au niveau physique : le compute-and-forward (CF). Nous nous intéressons à la maximisation du débit de calcul et nous montrons que c'est équivalent à la recherche du vecteur le plus court dans un réseau de points donné. Tout d'abord, nous implémentons le protocole utilisant des réseaux de points uni-dimensionnels et des gains de canal réels. Nous nous basons sur la fonction de maximum de vraisemblance (ML) pour proposer une technique de décodage quasi-ML et nous montrons que le décodage s'effectue par une approximation Diophantienne inhomogène. Ensuite, nous généralisons certains de ces résultats au cas des réseaux de points multi-dimensionnels et des gains de canal complexes, et nous proposons un critère de construction des codes en réseaux de points qu'on appelle le facteur de platitude.

We consider the problem of secure communications in a Gaussian two-way relay network where two nodes exchange confidential messages only via an untrusted relay. The relay is assumed to be honest but curious, i.e., an eavesdropper that conforms to the system rules and applies the intended relaying scheme. We analyze the achievable secrecy rates by applying network coding on the physical layer or the network layer and compare the results in terms of complexity, overhead, and efficiency. Further, we discuss the advantages and disadvantages of the respective approaches.

In wireless networks, reliable communication is a challenging issue due to many attenuation factors such as receiver noise, channel fading, interference and asynchronous delays. Lattice coding and decoding provide efficient solutions to many problems in wireless communications and multiuser information theory. The capability in achieving the fundamental limits, together with simple and efficient transmitter and receiver structures, make the lattice strategy a promising approach. This work deals with problems of lattice detection over fading channels and time asynchronism over the lattice-based compute-and-forward protocol. In multiple-input multiple-output (MIMO) systems, the use of lattice reduction significantly improves the performance of approximate detection techniques. In the first part of this thesis, by taking advantage of the temporal correlation of a Rayleigh fading channel, low complexity lattice reduction methods are investigated. We show that updating the reduced lattice basis adaptively with a careful use of previous channel realizations yields a significant saving in complexity with a minimal degradation in performance. Considering high data rate MIMO systems, we then investigate soft-output detection methods. Using the list sphere decoder (LSD) algorithm, an adaptive method is proposed to reduce the complexity of generating the list for evaluating the log-likelihood ratio (LLR) values. In the second part, by applying the lattice coding and decoding schemes over asynchronous networks, we study the impact of asynchronism on the compute-and-forward strategy. While the key idea in compute-and-forward is to decode a linear synchronous combination of transmitted codewords, the distributed relays receive random asynchronous versions of the combinations. Assuming different asynchronous models, we design the receiver structure prior to the decoder of compute-and-forward so that the achievable rates are maximized at any signal-to-noise-ratio (SNR). Finally, we consider symbol-asynchronous X networks with single antenna nodes over time-invariant channels. We exploit the asynchronism among the received signals in order to design the interference alignment scheme. It is shown that the asynchronism provides correlated channel variations which are proved to be sufficient to implement the vector interference alignment over the constant X network.

In wireless networks, reliable communication is a challenging issue due to many attenuation factors such as receiver noise, channel fading, interference and asynchronous delays. Lattice coding and decoding provide efficient solutions to many problems in wireless communications and multiuser information theory. The capability in achieving the fundamental limits, together with simple and efficient transmitter and receiver structures, make the lattice strategy a promising approach. This work deals with problems of lattice detection over fading channels and time asynchronism over the lattice-based compute-and-forward protocol. In multiple-input multiple-output (MIMO) systems, the use of lattice reduction significantly improves the performance of approximate detection techniques. In the first part of this thesis, by taking advantage of the temporal correlation of a Rayleigh fading channel, low complexity lattice reduction methods are investigated. We show that updating the reduced lattice basis adaptively with a careful use of previous channel realizations yields a significant saving in complexity with a minimal degradation in performance. Considering high data rate MIMO systems, we then investigate soft-output detection methods. Using the list sphere decoder (LSD) algorithm, an adaptive method is proposed to reduce the complexity of generating the list for evaluating the log-likelihood ratio (LLR) values. In the second part, by applying the lattice coding and decoding schemes over asynchronous networks, we study the impact of asynchronism on the compute-and-forward strategy. While the key idea in compute-and-forward is to decode a linear synchronous combination of transmitted codewords, the distributed relays receive random asynchronous versions of the combinations. Assuming different asynchronous models, we design the receiver structure prior to the decoder of compute-and-forward so that the achievable rates are maximized at any signal-to-noise-ratio (SNR). Finally, we consider symbol-asynchronous X networks with single antenna nodes over time-invariant channels. We exploit the asynchronism among the received signals in order to design the interference alignment scheme. It is shown that the asynchronism provides correlated channel variations which are proved to be sufficient to implement the vector interference alignment over the constant X network.