Objective : To determine the relationship of tongue volume as determined from Cone Beam Computed Tomography (CBCT) scan reconstructions with maxillary and mandibular arch width, axial cross-sectional palatal perimeter, palatal index and axial inclination of upper and lower first premolars and molars. Method: Thirty subjects without prior orthodontic treatment swished barium sulfate to coat the tongue prior to CBCT imaging. The scan reconstructions were analyzed with three after-market softwares and intra-examiner reliability was assessed. Results: Absolute agreement intra-class correlation coefficients were used to determine reliability of the measurements. Pearson correlation coefficients and regression analysis were used to determine relationships. Conclusions: Tongue volume was strongly correlated with upper inter-molar width and palatal perimeter at the molar level, and least correlated with lower inter-molar width and axial inclination of the upper and lower first premolars and molars. The differences in measurements obtained from the three softwares were not statistically significant.

No description available.

Accounting for respiration motion during imaging helps improve targeting precision in radiation therapy. Respiratory motion can be a major source of error in determining the position of thoracic and upper abdominal tumor targets during radiotherapy. Thus, extracting respiratory motion is a key task in radiation therapy planning. Respiration-correlated or four-dimensional CT (4DCT) imaging techniques have been recently integrated into imaging systems for verifying tumor position during treatment and managing respiration-induced tissue motion. The quality of the 4D reconstructed volumes is highly affected by the respiratory signal extracted and the phase sorting method used. This thesis is divided into two parts. In the first part, two image-based respiratory signal extraction methods are proposed and evaluated. Those methods are able to extract the respiratory signals from CBCT images without using external sources, implanted markers or even dependence on any structure in the images such as the diaphragm. The first method, called Local Intensity Feature Tracking (LIFT), extracts the respiratory signal depending on feature points extracted and tracked through the sequence of projections. The second method, called Intensity Flow Dimensionality Reduction (IFDR), detects the respiration signal by computing the optical flow motion of every pixel in each pair of adjacent projections. Then, the motion variance in the optical flow dataset is extracted using linear and non-linear dimensionality reduction techniques to represent a respiratory signal. Experiments conducted on clinical datasets showed that the respiratory signal was successfully extracted using both proposed methods and it correlates well with standard respiratory signals such as diaphragm position and the internal markers’ signal. In the second part of this thesis, 4D-CBCT reconstruction based on different phase sorting techniques is studied. The quality of the 4D reconstructed images is evaluated and compared for different phase sorting methods such as internal markers, external markers and image-based methods (LIFT and IFDR). Also, a method for generating additional projections to be used in 4D-CBCT reconstruction is proposed to reduce the artifacts that result when reconstructing from an insufficient number of projections. Experimental results showed that the feasibility of the proposed method in recovering the edges and reducing the streak artifacts.

INTRODUCTION: Utilization of rapid maxillary expansion (RME) is common for the correction of sagittal discrepancies in orthodontic treatment. RME appliances will transmit a compressive force to the periodontal support structures. This resultant force can lead to resorption of the dento-alveolar structures leading to unwanted dental movements. The purpose of this retrospective study was to compare changes from a periodontal and root resorption perspective by means of computer tomography with tooth-borne and bonded expanders. METHODS: The sample comprised of cone beam computed tomography and spiral CT images of 41 subjects, 12 to 17 years old, with unilateral or bilateral posterior crossbites. 20 subjects treated previously with a bonded expander and 21 with a banded expander. Pre and post-treatment images were digitized and landmarks were identified to measure buccal and lingual cortex thickness, alveolar height, root length and angulation by means of a computerized method. RESULTS: RME with banded and bonded expanders have similar effects from periodontal and root resorption perspectives. Changes include increasing thickness of lingual alveolar bone 0.2 to 0.7 mm, decreases in buccal bone width 0.1 to 0.5 mm; and decreases in alveolar height 0.1 to 0.9 mm and root length 0.3 to 1.0mm of each support teeth. CONCLUSIONS: RME with banded and bonded expanders exhibited similar changes post-expansion and these variables should not play a role in selection of the type of device.

Magister Scientiae Dentium - MSc(Dent) / Previously, many studies have used cone beam computed tomography (CBCT) to detect and confirm the exact location of the MB2 canal in maxillary molars. It is now considered the gold standard, as it allows clinicians to visualize complex anatomical structures and to perform endodontic treatment safely. However, in the context of this study, the prevalence and location of the MB2 in maxillary first and second permanent molars among the Libyan population is limited. The aim of this in vivo study is to describe the prevalence and location of the MB2 in the mesiobuccal root of first and second maxillary molars and to describe a methodology to enable its geometric location in the Libyan population using CBCT imaging.

La tomographie à faisceau conique (CBCT) est devenue la modalité de référence pour les praticiens du domaine dentaire. Sa relative nouveauté et ses spécificités impliquent que le domaine du traitement de ces images est peu développé à l’heure actuelle. En partenariat industriel avec Carestream Dental, le premier volet de la thèse a conduit à développer une méthode de segmentation semi-automatique de chaque dent, reposant sur l’utilisation de contraintes de forme et d’intensité, et formulée comme un problème de minimisation d’énergie résolu par coupure de graphe. Les résultats montrent une bonne qualité de segmentation avec un coefficient de Dice moyen de 0, 958. Une application logicielle a été réalisée pour la mise en œuvre de la méthode de segmentation auprès des praticiens, en tenant compte des contraintes techniques et temporelles imposées par le contexte clinique, ainsi que du profil des utilisateurs. Un travail préliminaire d’extension de l’approche par coupure de graphe pour segmenter simultanément plusieurs dents à été réalisé, montrant la nécessité de rendre les contraintes de formes plus adaptées aux images et de modifier la méthode d’optimisation pour atteindre des temps de calcul compatibles avec la pratique clinique. Un second volet prospectif des travaux concerne la constitution d’un modèle structurel de la région maxillo-faciale pour formaliser les connaissances a priori sur les organes et leurs interactions. Ce modèle est un graphe conceptuel où sont représentés les concepts des structures et des relations. En particulier, les relations d’alignement et “le long de” ont été modélisées en 3D dans le cadre des ensembles flous. / Cone-Beam computed tomography (CBCT) is the new standard imaging method for dental practitioners. The image processing field of CBCT data is still underdeveloped due to the novelty of the method and its specificities compared to traditional CT. With Carestream Dental as industrial partner, the first part of this work is a new semi-automatic segmentation protocol for teeth, based on shape and intensity constraints, through a graph-cut optimization of an energy formulation. Results show a good quality of segmentation with an average Dice coefficient of 0.958. A fully functional implementation of the algorithm has led to a software available for dentists, taking into account the clinical context leading to temporal and technical difficulties. A preliminary extension to multi-objects segmentation showed the necessity to get more stringent shape constraints as well as a better optimization algorithm to get acceptable computation times. The second part of this thesis, more prospective, is about the creation of a structural model of the maxillo-facial space, to formalize the a priori knowledge on organs and theirs spatial relations. This model is a conceptual graph where structures and relationships are seen as concepts. In particular, the spatial relations “Along” and “Aligned”, modeled in a fuzzy set framework, have been extended to 3D objects.

A cárie dentária continua sendo um grande desafio para os Cirurgiões-Dentistas pela dificuldade de diagnóstico, sobretudo em superfícies proximais. Muitos equipamentos se destinam a facilitar o exame do paciente, tendo como principal objetivo o diagnóstico de cáries incipientes. Dentre os exames mais utilizados está a radiografia interproximal associada ao exame clínico. O Sistema Internacional de Avaliação e Detecção de Cáries (ICDAS) vem sendo bem aceito tanto para o uso clínico como para pesquisas in vitro e in vivo, apresentando ótimos resultados. Além da técnica interproximal, a tomografia cone beam (CBCT) vem entrando no cotidiano da Odontologia, mas pouco se sabe sobre o seu desempenho para avaliação de cáries iniciais em superfícies proximais. A microtomografia (CT) é um novo método de avaliação destinado a pequenos espécimes e se assemelha a uma versão em miniatura da tomografia axial computadorizada, gerando imagens na ordem de micrômetros. Este método vem sendo utilização em pesquisas para se avaliar tecidos mineralizados, devido à sua habilidade de aferir com precisão o coeficiente de atenuação linear. O método padrão ouro que define com maior precisão os estágios da cárie é o histológico. Contudo, para sua avaliação é necessário destruir os espécimes. Este trabalho teve por objetivo avaliar o desempenho do método ICDAS, de radiografias digitais pela técnica interproximal, da CBCT e da CT para lesões precoces de cárie, com relação à histologia. Houve correlação entre os dados obtidos com o sistema ICDAS para superfícies proximais e as imagens da CT, no que diz respeito à classificação quanto à profundidade das lesões. A CT tem correlação positiva com a histologia tanto na classificação das lesões como na profundidade, contudo esta relação poderia ser maior se uma melhor resolução fosse conseguida. As radiografias digitais pela técnica interproximal tiveram o melhor desempenho com relação à CT e à histologia, sendo este desempenho muito semelhante ao método clínico ICDAS. A CBCT obteve o pior desempenho, contudo ainda assim houve correlação positiva com a histologia e com a CT. A associação do método clínico ICDAS e as radiografias interproximais digitais tiveram o melhor desempenho com relação à histologia. A grande vantagem da microtomografia quando comparada a outros métodos de avaliação da doença cárie, é a manutenção da integridade dos espécimes, a informação tridimensional e isotrópica, possibilitando o uso dos espécimes em outro momento, sem a perda de eventuais características presentes nos mesmos. / Dental caries is still a great challenge to dentists, manly in proximal surfaces due to its difficult diagnosis. Many types of equipment have been designed to minimize this problem, specially aiming early caries detection. Among all, one of the most used by clinicians is the interproximal radiograph. The International Caries Assessment System (ICDAS) is a clinical evaluation method that is well accepted and used having a good performance not only for in vivo but also for in vitro studies. Cone beam CT (CBCT) is also being assessed in the overall Dentistry, but its performance on early caries detection has not extensively being evaluated. Microtomography (CT) is a new assessment method which is addressed to small specimens and is similar to a miniature version of axial computed tomography, producing images with micrometrical definition. CT is being assessed in dental research to evaluate mineral content of hard tissues, due to its ability to measure precisely the linear attenuation coefficient. The gold standard method to measure early caries lesions is histological method. However, to perform it, its necessary to cut the specimen. This study had the aim to evaluate the ICDAS, digital X-rays with the interproximal technique, CBCT and CT performance for early caries lesions, when compared to histology. ICDAS for proximal surfaces and CT had a positive correlation through the lesions depth. CT had a positive correlation with histology when analyzing lesions depth and the classification relating to the severity of the lesion, although this relation could be better if a better resolution could be achieved. Digital bite-wing radiographs had the best performance among all exams when comparing to CT and histology, similar to what we notice with the ICDAS results. CBCT had the worst results when comparing to CT and histology, but it was still considered a good relation. The best performance was achieved with the association of ICDAS and digital bite-wing radiographs when comparing to histology. The great advantage of CT when compared to other validating methods to evaluate dental caries is that it doesnt destroy the specimens, it gives tridimensional and isotropic information, making possible to use the specimens again, without losing inner properties.

Objetivo: O desenvolvimento da tecnologia em diagnóstico odontológico por imagem através dos Tomógrafos Computadorizados por Feixe Cônico, tornou possível e acessível a avaliação cefalométrica através de reconstruções volumétricas do crânio. Parâmetros baseados em evidências científicas são necessários para implementar o seu uso. Alguns parâmetros utilizados na cefalometria convencional (bidimensional) deverão ser esquecidos, outros deverão ser adaptados, outros, ainda, deverão ser criados. Propomos aqui a criação de um Cefalostato Virtual para orientação do crânio em TC, com a utilização de pontos intracranianos, que são mais estáveis. Também propomos a criação do ponto TS e da linha TS-Pg em substituição ao ponto S e ao eixo Y de crescimento de Downs, respectivamente. Além disso, propomos a linha Ba-Op como referência para casos de assimetria faciais onde não é possível a utilização do plano Horizontal de Frankfurt, em casos, por exemplo, de síndromes que afetem os pontos de referências mais externos. Métodos: 49 crânios pertencentes ao do Museu de Anatomia UNIFESP, foram escaneados em um tomógrafo computadorizado por feixe cônico (TCFC), na clínica ISOOrthographic, São Paulo. As pontuações foram realizadas em dois momentos, com espaçamento de uma semana. Foram calculadas estatisticamente medidas-resumo (média, quartis, mínimo, máximo e desvio padrão). Foram calculadas também as correlações intraclasse e correlações de Pearson entre o Eixo Y (S-Gn) e linha entre os pontos TS e Pg. Resultados: Apesar de se observar uma baixa reprodutibilidade nas coordenadas, para os pontos CE, Pg e Gn, foi observada alta correlação entre as medidas angulares em questão. Para descrever a inclinação do Eixo Y em função da inclinação da Linha TS e Pg adotou-se um modelo de regressão linear simples descrito pela equação abaixo: Ang Sö- Gn = 0,989 Ang TS Pgi i Conclusões: o uso do Cefalostato Virtual na orientação de Crânios em Tomografia Computadorizada é factível e favorece a reprodução do posicionamento craniano; apesar da baixa reprodutibilidade intra observador dos pontos CE, Pg e Gn, novos critérios tridimensionais na definição destes pontos poderiam aumentar a precisão na sua localização; a alta reprodutibilidade intra observador para os pontos Op, TS e N, sugere que os critérios anatômicos próprios das estruturas estudadas favorecem a sua determinação; o ponto TS apresentou maior reprodutibilidade do que o ponto S, embora esta diferença não tenha sido estatisticamente significante, podendo-se substituir o ponto S pelo TS em estudos futuros; existe alta correlação entre a linha entre os pontos TS e Pg e o Eixo Y; a avaliação do comportamento da inclinação da linha orbitomeática (HF) com relação à linha Básio-Opístio sugere que na presença de alterações cranianas este relacionamento propicie auxílio no diagnóstico das alterações craniofaciais. / Objective: The development of new technology in dental diagnosis by cone beam CT (CBCT) image, made possible and accessible the realization of cephalometric evaluation through volumetric reconstructions of the skull. Scientific parameters with evidence-based are needed to implement its use. Some parameters used in conventional cephalometry (2D) maybe need to be forgotten, others should be adapted, and others still to be created. In this research we propose to create a Virtual Cephalostat orientation of the skull in CT, with the intracranial landmarks, because they are more stable. We propose the creation of landmark TS (Tubercle Sella) and the TS-Pg line to replace the landmark S (Sella) and the Y-axis of growth (Downs), respectively. Furthermore, we propose to use the Basion-Opistion line as a reference for cases of craniofacial asymmetry where is not possible to use the Frankfurt horizontal plane, as in some cases of syndromes that affects the most external landmarks. Methods: 49 skulls of Anatomy Museum of UNIFESP Federal University of São Paulo, were scanned in a CBCT. The analyses were performed in 2 stages, within 1-week space. Statistics measurements were calculated (mean, quartiles, minimum, maximum and standard deviation). We also calculated the intraclass correlations (ICC) and the Pearson correlations between the Y axis (S-Gn) and the line between landmarks TS-Pg. Results: Even if there is a low reproducibility in the coordinates for landmarks EC (Ethmoidal Crest), Pg and Gn it was observed a high correlation between the angular measures in question. To describe the inclination of the Y axis according to the slope of the line adopted TS and Pg a simple linear regression model is used, showed by the equation bellow: Ang Sö- Gn = 0,989 Ang TS Pgi i Conclusions: The use of the Virtual Cephalostat in orientation of skulls using CBCT is feasible and facilitates the reproduction of the skull position, despite the low intra observer reproducibility of landmarks EC, Pg and Gn, new 3D criteria in the definition of these landmarks could increase the precision in its location. The high intra observer reproducibility at the landmarks Op, N and TS, suggests that the anatomical criteria themselves promote their reliability; The TS landmark showed a higher reproducibility than the S landmark, even though the difference was not statistically significant, and it should be replaced by the landmark TS in future studies. There is a high correlation between the TS - Pg line and Y-axis. The relationship between the slope of the HF plane and Ba -Op line suggests that in the presence of the alteration of morphology in craniofacial structure, this relationship offer help in the diagnosis of craniofacial changes.

O objetivo principal desta pesquisa foi justificar a proposta de utilização de um novo método tomográfico (cone beam) de avaliação das espessuras ósseas alveolares, maxilares e mandibulares, por meio de testes objetivos das Condições de Repetitividade e de Precisão Intermediária associadas à variação intra e interoperadores, e conforme a utilização de programa computacional independente (AutoCAD®) para a realização das medições, aplicadas à sequência do Procedimento Operacional Padrão (POP) definido para este experimento. A Fase I da pesquisa registrou os critérios de obtenção da qualidade final das imagens tomográficas definitivas, a partir de equipamento iCAT® (Imaging Sciences International, Hatfield, Pa), com parâmetros de aquisição de 120KVp, 37,7mA e 26,9s, e considerando FOV cilíndrico de 13cm e matriz de 512x512 pixels. A resolução do voxel foi de 0,25mm; A Fase II registrou os critérios exploratórios relativos às condições operacionais do software de visualização, registro (inspeção e identificação) e medição das grandezas selecionadas. A Fase III registrou a realização dos testes de repetitividade e de reprodutibilidade das medidas. Um total de 72 grandezas lineares foram previamente definidas e metodologicamente testadas em sua qualidade de inspeção, identificação e medição, a partir da avaliação de sete (7) operadores independentes, cinco dos quais eram especialistas e com Mestrado Acadêmico em Ortodontia pela FOUSP e, o outro, especialista em Radiologia Odontológica e Doutor em Diagnóstico Bucal (FOUSP). Os examinadores foram previamente instruídos, calibrados e treinados considerando os requerimentos necessários à execução dos testes propostos. O protocolo de pesquisa foi aprovado pelo Comitê de Ética em Pesquisa da Faculdade de Odontologia da Universidade de São Paulo (Parecer CAAE 0120.0.017.000-11). A análise estatística dependeu da utilização de Modelo de Componentes de Variância (hierárquico), e foram consideradas como fontes de variação: as medidas, efetuadas por um mesmo operador ou por diferentes operadores; a face considerada, vestibular ou lingual/palatina; os locais (três níveis de espessura óssea alveolar) em cada uma das faces e, ainda, os diferentes dentes. Esta análise foi realizada de forma separada para mandíbula e maxila. Valores de p<0,05 indicaram significância estatística. Os resultados indicaram significativa confiabilidade geral no método proposto, considerando a Condição de Repetitividade, com apenas 0,24% da variabilidade maxilar total atribuível a um único operador, e mandibular de 0,53%; e com valores expressivos relativos às incertezas de medida maxilares (0,156mm) e mandibulares (0,091mm), desse modo atestando significativa consistência interna (repetibilidade) do método. Os testes da Condição de Precisão Intermediária também indicaram significativa confiabilidade geral no método proposto, com apenas 1,52% da variabilidade total mandibular atribuível à participação de diversos operadores, e maxilar de 0,25%; e com valores também expressivos relativos às incertezas de medida mandibulares (0,149mm) e maxilares (0,158mm), desse modo atestando significativa condição final de reprodutibilidade. Conclui-se que a utilização de imagens provenientes de tomógrafo iCAT®, conforme indicação de resolução de imagem com voxel de 0,25mm, em humanos vivos e a partir de cortes trans-axiais sistematicamente operacionalizados com auxílio de Software AutoCAD®, propicia a geração de condições metodológicas suficientemente favoráveis à obtenção de mapeamento quantitativo linear de espessuras ósseas alveolares, vestibulares e palatinas/linguais, tanto para a maxila quanto para a mandíbula. / This research aimed to justify the proposed use of a new tomography method (cone beam) in the clinical assessment of alveolar, maxillary and mandibular bone width, through objective tests of the Conditions of Repetitiveness and Intermediate Precision associated with intra- and inter-operator variation, using the independent computer program (AutoCAD®) for the execution of the measurements according to the Standard Operating Procedure (SOP) sequence defined for this experiment. Phase I of the research recorded the criteria for obtaining the final quality of the tomography images, using iCAT® (Imaging Sciences International, Hatfield, Pa, USA) equipment with acquisition parameters 120KVp, 37.7mA, and 26.9s, and considering cilindric field-of-view (FOV) of 13cm and 512x512 pixels matrix. The voxel resolution was 0.25mm. Phase II recorded the exploratory criteria relative to the operational conditions of the visualization software, registry (visual inspection and landmark identification) and measurement of the selected magnitudes. Phase III recorded the tests of repeatability and reproducibility of the measurements. A total of 72 linear magnitudes were previously defined and methodologically tested for their quality of inspection, identification and measurement, based on assessment by seven (7) independent operators, five of whom were specialists, with masters degrees in Orthodontics from FOUSP; and the other, a specialist in Dental Radiology and Doctor of Oral Diagnosis (FOUSP). The examiners were previously instructed, calibrated and trained according to the requirements for performing the proposed tests. The research protocol was approved by the Committee for Ethics in Research of the Faculty of Dentistry at the University of São Paulo (Protocol # 102/11-CAAE 0120.0.017.000-11). Statistical analysis used the (hierarchical) Components of Variation Model, and the sources of variation were considered to be: the measurements, made by the same operator or by different operators; the face considered, whether vestibular or lingual/palatal; the locations (three levels of alveolar bone thickness) in each of the faces and, also, the different teeth. This analysis was carried out separately for the mandible and the maxilla. Values of p<0.05 indicated statistical significance. The results indicated overall significant reliability in the proposed method considering the Condition of Repetitiveness, with only 0.24% of total maxillary, and 0.53% of mandibular, variability attributable to a single operator; and with expressive values relative to measurement uncertainties of maxillary (0.156 mm) and mandibular (0.091mm) averages, thereby attesting to significant internal consistency (\"repeatability\") of the method. Tests for the Condition of Intermediate Precision also indicated overall significant reliability of the proposed method, with only 1.52% total mandibular, and 0.25% maxillary, variability attributable to the participation of the various operators; and, also, with expressive values relative to measurement uncertainties of mandibular (0.149mm) and maxillary (0.158mm) averages, thereby attesting to the significant final condition of reproducibility. It is concluded that the use of images from iCAT® tomography, as indicated by image resolution with voxels of 0.25mm, in live humans and from transaxial cuts performed systematically with the help of AutoCAD® Software, provides methodological conditions sufficiently favorable for obtaining linear quantitative mapping of alveolar, vestibular and palatal/lingual bone thicknesses, for both the maxillary and mandibular dental arches.

O seio esfenoidal humano, embora sua morfologia seja mais regular quando comparada à dos demais seios paranasais, apresenta numerosas variações anatômicas que afetam sua relação com estruturas vizinhas. Diversos autores mostram a importância do conhecimento dessas variações anatômicas, baseadas tanto na forma quanto na sua presença, para uma correta e segura abordagem cirúrgica nos procedimentos via endoscópica transesfenoidais. Devido a isso, o frequente estudo deste segmento anatômico se torna preponderante e para isso a tomografia computadorizada helicoidal, mais recentemente com o desenvolvimento da aquisição multislice, é de grande importância para o conhecimento tridimensional dos seus aspectos anatômicos e suas estruturas vizinhas, sendo hoje o exame indicado. A tomografia computadorizada por feixe cônico, devido ao baixo custo dos equipamentos e principalmente a baixa dose de radiação, aliada à qualidade e fidelidade de suas imagens, têm ocupado um espaço importante no diagnóstico por imagem nas diferentes especialidades da Odontologia e mostra-se também relevante sua ampliação em outras áreas em função das vantagens já citadas. O objetivo desse estudo, a partir da análise das imagens de 300 pacientes, obtidas em equipamento de tomografia computadorizada por feixe cônico, é mostrar a viabilidade da obtenção das mesmas para a avaliação das variações anatômicas do seio esfenoidal humano, no que se refere à presença e o tipo de expansão basilar e de septos, em um tomógrafo que une qualidade e fidelidade de imagens com baixa dose de radiação. Os resultados mostraram ser viável a observação, por meio da tomografia computadorizada por feixe cônico, tanto da presença de expansão basilar quanto de septos no seio esfenoidal humano, onde 69% dos exames analisados apresentaram expansão basilar e 60% septos. A presença de expansões mostrou ser independente em relação ao gênero e a idade e 81% delas apresentaram-se como críticas. A presença de septos mostrou ser também independente em relação ao gênero, porém associada a pacientes acima de 40 anos, sendo que 36% apresentaram somente o septo principal, 6% septos acessórios e 18% ambos. / The human sinus, although their morphology is more regular when compared to the other paranasal sinuses, has numerous anatomical variations that affect their relationship with neighboring structures. Several authors show the importance of anatomical variations knowledge, based on its shape and occurrence, for a correct and safe surgical approach in the endoscopic transsphenoidal procedures. Due to this, the frequent anatomic study becomes important and the helical CT, most recently with the development of multislice acquisition, is of great importance to the knowledge of their three-dimensional anatomy and its neighboring structures, being nowadays the main indicated survey. The cone beam computed tomography due to the its low cost of equipment and especially the low dose of radiation, combined with quality and fidelity of images, have occupied an important position in diagnostic imaging in the different specialties of Dentistry and shows to be also relevant in others areas according to the advantages already mentioned. This study, based on the analysis of obtained images from 300 patients in cone beam computed tomography equipment, intents the viability of obtaining the evaluation of anatomic variations of sphenoid sinus, in regard to the presence and type of basilar expansion and internal septa, in a CT scanner that combines quality and fidelity of images with low radiation dose. By means of cone-beam computed tomography the results showed the observation to be viable. The presence of basilar sinus expansion and septa in human sphenoid sinus were found. 69% of the analyzed cases showed basilar expansion and 60% the presence of septa. The presence of expansion was independent when considered the gender and age and 81% presented themselves as critical. The presence of septa was independent of gender and associated with patients over 40 years, and 36% had only primary septum, 6% accessories septa and 18% both.