Over time, wireless technology advancements in the field of communications have been attracting every individual to turn into a wireless user. To accommodate the increasing number of users and to avoid the problem of spectrum scarcity, the concept of Cognitive Radio Network (CRN) has been developed. Cognitive Radio (CR) is an intelligent radio which efficiently detects and allocates the spectrums of primary licensed users (PUs) to the secondary unlicensed users (SUs). The SUs can utilize these spectrums as long as they do not cause harmful interfere to the PUs. Interference may occur because of the following reasons: misdetection of spectrum availability, the high transmission power of SU when both SU and PU are present in the same channel at the same time. In order to avoid interference, the radio has to have a very accurate spectrum sensing method, transmit power at SU should be constrained by the peak interference power of PU and the CR should continuously sense the presence of PUs. To increase the wireless coverage area and reliability of CRN, a new technology called Cooperative Cognitive Radio Network (CCRN), which is a combination of CRN and cooperative communications was developed. A CCRN not only increases the reliability and wireless coverage area of CR but also improves the overall performance of the system. In this context, the main objective of this research work is to evaluate the outage performance of a CCRN in an environment where fading and shadowing also come into the picture and to study the importance of relay networks in CRN. To fulfill the objectives of this research work, a two-hop decode-and-forward CCRN is considered. The recently introduced κ − µ shadowed fading channel is employed over the CCRN to generate a realistic environment.  In order to implement such system as a whole, a deep literature study is performed beforehand. Analytical expressions for the Probability Density Function (PDF) and Cumulative Distribution Function (CDF) of the Signal-to-Noise Ratio (SNR) are obtained. The analytical expressions and simulation results for Outage Probability (OP) are obtained and compared under different fading parameters. The importance of a multiple-relay system in CRN is presented. From the results obtained in this research work, we can conclude that the OP decreases with increase in allowable peak interference power at the PU. The transmit power at SU should always be constrained by the peak interference power at the PU to avoid interference. The overall system performance increases with increasing number of relays.

With the rapid growth of wireless communications, the demand for the various multimedia services is increasing day by day leading to a deficit in the frequency spectrum resources. To overcome this problem, the concept of cognitive radio technology has been proposed which allows the unlicensed secondary user (SU) to access the licensed spectrum of the primary user (PU), thus improving the spectrum utilization. Cooperative communications is another emerging technology which is capable of overcoming many limitations in wireless systems by increasing reliability and coverage. The transmit and receive diversity techniques such as orthogonal space–time block codes (OSTBCs) and selection combining (SC) in multiple-input multiple-output (MIMO) cognitive amplify and forward relay networks help to reduce the effects of fading, increase reliability and extend radio coverage.   In this thesis, we consider a MIMO cognitive cooperative radio network (CCRN) with multiple relays. The protocol used at the relays is an amplify and forward protocol. At the receiver, the SC technique is applied to combine the signals. Analytical expressions for the probability density function (PDF) and cumulative distribution function (CDF) of the signal-to-noise ratio (SNR) are derived. On this basis, the performance in terms of outage probability is obtained. Mathematica has been used to generate numerical results from the analytical expressions. The system model is simulated in MATLAB to verify the numerical results. The performance analysis of the system model is hence done in terms of outage probability.

Efficient receiver designs for cooperative communication networks are becoming increasingly important. In previous work, cooperative networks communicated with the use of L relays. As the receiver is constrained, channel shortening and reduced-rank techniques were employed to design the preprocessing matrix that reduces the length of the received vector from L to U. In the first part of the work, a receiver structure is proposed which combines our proposed threshold selection criteria with the joint iterative optimization (JIO) algorithm that is based on the mean square error (MSE). Our receiver assists in determining the optimal U. Furthermore, this receiver provides the freedom to choose U for each frame depending on the tolerable difference allowed for MSE. Our study and simulation results show that by choosing an appropriate threshold, it is possible to gain in terms of complexity savings while having no or minimal effect on the BER performance of the system. Furthermore, the effect of channel estimation on the performance of the cooperative system is investigated. In the second part of the work, a joint preprocessor-based detector for cooperative communication networks is proposed for one-way and two-way relaying. This joint preprocessor-based detector operates on the principles of minimizing the symbol error rate (SER) instead of minimizing MSE. For a realistic assessment, pilot symbols are used to estimate the channel. From our simulations, it can be observed that our proposed detector achieves the same SER performance as that of the maximum likelihood (ML) detector with all participating relays. Additionally, our detector outperforms selection combining (SC), channel shortening (CS) scheme and reduced-rank techniques when using the same U. Finally, our proposed scheme has the lowest computational complexity.

Demand for high data rates is increasing rapidly for the future wireless generations, due to the requirement ofubiquitous coverage for wireless broadband services. More base stations are needed to deliver these services, in order tocope with the increased capacity demand and inherent unreliable nature of wireless medium. However, this would directly correspond to high infrastructure costand energy consumption in cellular networks. Nowadays, high power consumption in the network is becoming a matter of concern for the operators,both from environmental and economic point of view. Cooperative communications, which is regarded as a virtual multi-input-multi-output (MIMO) channel, can be very efficient in combating fading multi-path channels and improve coverage with low complexity and cost. With its distributed structure, cooperativecommunications can also contribute to the energy efficiency of wireless systems and green radio communications of the future. Using networkcoding at the top of cooperative communication, utilizes the network resources more efficiently. Here we look at the case of large scale use of low cost relays as a way of making the links reliable, that directly corresponds to reductionin transmission power at the nodes. A lot of research work has focused on highlighting the gains achieved by using network codingin cooperative transmissions. However, there are certain areas that are not fully explored yet. For instance, the kind of detectionscheme used at the receiver and its impact on the link performance has not been addressed.The thesis looks at the performancecomparison of different detection schemes and also proposes how to group users at the relay to ensure mutual benefit for the cooperating users.Using constellation selection at the nodes, the augmented space formed at the receiver is exploited for making the links more reliable. Thenetwork and the channel coding schemes are represented as a single product code, that allows us to exploit the redundancy present in theseschemes efficiently and powerful coding schemes can also be designed to improve the link performance. Heterogeneous network deployments and adaptive power management has been used in order to reduce the overall energy consumption in acellular network. However, the distributed structure of nodes deployed in the network, is not exploited in this regard. Here we have highlightedthe significance of cooperative relaying schemes in reducing the overall energy consumption in a cellular network.  The role of differenttransmission and adaptive resource allocation strategies in downlink scenarios have been investigated in this regard.It has been observed that the adaptive relaying schemes can significantly reduce the total energy consumption as compared to the conventionalrelaying schemes. Moreover, network coding in these adaptive relaying schemes, helps in minimizing the energy consumption further.The balance between the number of base stations and the relays that minimizes the energy consumption, for each relaying scheme is also investigated. / QC 20120124

The concept of cooperation in communications has drawn a lot of research attention in recent years due to its potential to improve the efficiency of wireless networks. This new form of communications allows some users to act as relays and assist the transmission of other users' information signals. The aim of this thesis is to apply optimization techniques in the design of multi-relay wireless networks employing cooperative communications. In general, the thesis is organized into two parts: ``Distributed space-time coding' (DSTC) and ``Distributed beamforming', which cover two main approaches in cooperative communications over multi-relay networks. <br><br> In Part I of the thesis, various aspects of distributed implementation of space-time coding in a wireless relay network are treated. First, the thesis proposes a new fully-diverse distributed code which allows noncoherent reception at the destination. Second, the problem of coordinating the power allocation (PA) between source and relays to achieve the optimal performance of DSTC is studied and a novel PA scheme is developed. It is shown that the proposed PA scheme can obtain the maximum diversity order of DSTC and significantly outperform other suboptimal PA schemes. Third, the thesis presents the optimal PA scheme to minimize the mean-square error (MSE) in channel estimation during training phase of DSTC. The effect of imperfect channel estimation to the performance of DSTC is also thoroughly studied. <br><br> In Part II of the thesis, optimal distributed beamforming designs are developed for a wireless multiuser multi-relay network. Two design criteria for the optimal distributed beamforming at the relays are considered: (i) minimizing the total relay power subject to a guaranteed Quality of Service (QoS) measured in terms of signal-to-noise-ratio (SNR) at the destinations, and (ii) jointly maximizing the SNR margin at the destinations subject to power constraints at the relays. Based on convex optimization techniques, it is shown that these problems can be formulated and solved via second-order conic programming (SOCP). In addition, this part also proposes simple and fast iterative algorithms to directly solve these optimization problems.

Computation problems, such as network coding and averaging consen- sus, have become increasingly central to the study of wireless networks. Network coding, in which intermediate terminals compute and forward functions of others’ messages, is instrumental in establishing the capacity of multicast networks. Averaging consensus, in which terminals compute the mean of others’ measurements, is a canonical building block of dis- tributed estimation over sensor networks. Both problems, however, are typically studied over graphical networks, which abstract away the broad- cast and superposition properties fundamental to wireless propagation. The performance of computation in realistic wireless environments, there- fore, remains unclear. In this thesis, I seek after near-optimal computation strategies under realistic wireless models. For both network coding and averaging con- sensus, cooperative communications plays a key role. For network cod- ing, I consider two topologies: a single-layer network in which users may signal cooperatively, and a two-transmitter, two-receiver network aided by a dedicated relay. In the former topology, I develop a decode-and- forward scheme based on a linear decomposition of nested lattice codes. For a network having two transmitters and a single receiver, the proposed scheme is optimal in the diversity-multiplexing tradeo↵; otherwise it pro- vides significant rate gains over existing non-cooperative approaches. In the latter topology, I show that an amplify-and-forward relay strategy is optimal almost everywhere in the degrees-of-freedom. Furthermore, for symmetric channels, amplify-and-forward achieves rates near capacity for a non-trivial set of channel gains. For averaging consensus, I consider large networks of randomly-placed nodes. Under a path-loss wireless model, I characterize the resource de- mands of consensus with respect to three metrics: energy expended, time elapsed, and time-bandwidth product consumed. I show that existing con- sensus strategies, such as gossip algorithms, are nearly order optimal in the energy expended but strictly suboptimal in the other metrics. I propose a new consensus strategy, tailored to the wireless medium and cooperative in nature, termed hierarchical averaging. Hierarchical averaging is nearly order optimal in all three metrics for a wide range of path-loss exponents. Finally, I examine consensus under a simple quantization model, show- ing that hierarchical averaging achieves a nearly order-optimal tradeo↵ between resource consumption and estimation accuracy.

Next generation wireless communication systems are expected to provide a variety of services including voice, data and video. The rapidly growing demand for these services needs high data rate wireless communication systems with reliability and high user capacity. Recently, it has been shown that reliability and achievable data rate of wireless communication systems increases dramatically by employing multiple transmit and receive antennas. Transmit diversity is a powerful technique for combating multipath fading in wireless communications. However, employing multiple antennas in a mobile terminal to achieve the transmit diversity in the uplink is not feasible due to the limited size of the mobile unit. In order to overcome this problem, a new mode of transmit diversity called cooperative diversity (CD) based on user cooperation, was proposed very recently. By user cooperation, it is meant that the sender transmits to the destination and copies to other users, called partners, for relaying to the destination. The antennas of the sender and the partners together form a multiple antenna situation. CD systems are immuned not only against small scale channel fading but also against large scale channel fading. On the other hand, CD systems are more sensitive to interuser (between sender and partner) transmission errors and user mobility. In this dissertation, we propose a bandwidth and power efficient CD system which could be accommodated with minimal modifications in the currently available direct or point-to-point communication systems. The proposed CD system is based on quadrature signaling (QS). With quadrature signaling, both sender’s and partners’ information symbols are transmitted simultaneously in his/her multiple access channels. It also reduces the synchronization as well as the interference problems that occur in the schemes reported in the literature. The performance of the proposed QS-CD system is analyzed at different layers. First, we study the bit error probability (BEP) of the QS-CD system for both fixed and adaptive relaying at the partner. It is shown from the BEP performance that the QS-CD system can achieve diversity order of two. Then, a cross-layer communication system is developed by combing the proposed QS-CD system at the physical layer and the truncated stop-and- wait automatic repeat request (ARQ) at the data link layer. The performance of the cross-layer system is analyzed and compared with existing schemes in the literature for performance metrics at the data link layer and upper layers, i.e., frame error rate, packet loss rate, average packet delay, throughput, etc. In addition, the studies show that the proposed QS-CD-ARQ system outperforms existing schemes when it has a good partner. In this respect, the proposed system is fully utilizing the communication channel and less complex in terms of implementation when compared with the existing systems. Since the partner selection gives significant impact on the performance of the CD systems, partner selection algorithms (PSAs) are extensively analyzed for both static and mobile user network. In this case, each individual user would like to take advantage of cooperation by choosing a suitable partner. The objective of an individual user may conflict with the objective of the network. In this regard, we would like to introduce a PSA which tries to balance both users and network objectives by taking user mobility into consideration. The proposed PSA referred to as worst link first (WLF), to choose the best partner in cooperative communication systems. The WLF algorithm gives priority to the worst link user to choose its partner and to maximize the energy gain of the radio cell. It is easy to implement not only in centralized networks but also in distributed networks with or without the global knowledge of users in the network. The proposed WLF matching algorithm, being less complex than the optimal maximum weighted (MW) matching and the heuristic based Greedy matching algorithms, yields performance characteristics close to those of MW matching algorithm and better than the Greedy matching algorithm in both static and mobile user networks. Furthermore, the proposed matching algorithm provides around 10dB energy gain with optimal power allocation over a non-cooperative system which is equivalent to prolonging the cell phone battery recharge time by about ten times.

Next generation wireless communication systems are expected to provide a variety of services including voice, data and video. The rapidly growing demand for these services needs high data rate wireless communication systems with reliability and high user capacity. Recently, it has been shown that reliability and achievable data rate of wireless communication systems increases dramatically by employing multiple transmit and receive antennas. Transmit diversity is a powerful technique for combating multipath fading in wireless communications. However, employing multiple antennas in a mobile terminal to achieve the transmit diversity in the uplink is not feasible due to the limited size of the mobile unit. In order to overcome this problem, a new mode of transmit diversity called cooperative diversity (CD) based on user cooperation, was proposed very recently. By user cooperation, it is meant that the sender transmits to the destination and copies to other users, called partners, for relaying to the destination. The antennas of the sender and the partners together form a multiple antenna situation. CD systems are immuned not only against small scale channel fading but also against large scale channel fading. On the other hand, CD systems are more sensitive to interuser (between sender and partner) transmission errors and user mobility. In this dissertation, we propose a bandwidth and power efficient CD system which could be accommodated with minimal modifications in the currently available direct or point-to-point communication systems. The proposed CD system is based on quadrature signaling (QS). With quadrature signaling, both sender’s and partners’ information symbols are transmitted simultaneously in his/her multiple access channels. It also reduces the synchronization as well as the interference problems that occur in the schemes reported in the literature. The performance of the proposed QS-CD system is analyzed at different layers. First, we study the bit error probability (BEP) of the QS-CD system for both fixed and adaptive relaying at the partner. It is shown from the BEP performance that the QS-CD system can achieve diversity order of two. Then, a cross-layer communication system is developed by combing the proposed QS-CD system at the physical layer and the truncated stop-and- wait automatic repeat request (ARQ) at the data link layer. The performance of the cross-layer system is analyzed and compared with existing schemes in the literature for performance metrics at the data link layer and upper layers, i.e., frame error rate, packet loss rate, average packet delay, throughput, etc. In addition, the studies show that the proposed QS-CD-ARQ system outperforms existing schemes when it has a good partner. In this respect, the proposed system is fully utilizing the communication channel and less complex in terms of implementation when compared with the existing systems. Since the partner selection gives significant impact on the performance of the CD systems, partner selection algorithms (PSAs) are extensively analyzed for both static and mobile user network. In this case, each individual user would like to take advantage of cooperation by choosing a suitable partner. The objective of an individual user may conflict with the objective of the network. In this regard, we would like to introduce a PSA which tries to balance both users and network objectives by taking user mobility into consideration. The proposed PSA referred to as worst link first (WLF), to choose the best partner in cooperative communication systems. The WLF algorithm gives priority to the worst link user to choose its partner and to maximize the energy gain of the radio cell. It is easy to implement not only in centralized networks but also in distributed networks with or without the global knowledge of users in the network. The proposed WLF matching algorithm, being less complex than the optimal maximum weighted (MW) matching and the heuristic based Greedy matching algorithms, yields performance characteristics close to those of MW matching algorithm and better than the Greedy matching algorithm in both static and mobile user networks. Furthermore, the proposed matching algorithm provides around 10dB energy gain with optimal power allocation over a non-cooperative system which is equivalent to prolonging the cell phone battery recharge time by about ten times.

The concept of cooperation in communications has drawn a lot of research attention in recent years due to its potential to improve the efficiency of wireless networks. This new form of communications allows some users to act as relays and assist the transmission of other users' information signals. The aim of this thesis is to apply optimization techniques in the design of multi-relay wireless networks employing cooperative communications. In general, the thesis is organized into two parts: ``Distributed space-time coding' (DSTC) and ``Distributed beamforming', which cover two main approaches in cooperative communications over multi-relay networks. <br><br> In Part I of the thesis, various aspects of distributed implementation of space-time coding in a wireless relay network are treated. First, the thesis proposes a new fully-diverse distributed code which allows noncoherent reception at the destination. Second, the problem of coordinating the power allocation (PA) between source and relays to achieve the optimal performance of DSTC is studied and a novel PA scheme is developed. It is shown that the proposed PA scheme can obtain the maximum diversity order of DSTC and significantly outperform other suboptimal PA schemes. Third, the thesis presents the optimal PA scheme to minimize the mean-square error (MSE) in channel estimation during training phase of DSTC. The effect of imperfect channel estimation to the performance of DSTC is also thoroughly studied. <br><br> In Part II of the thesis, optimal distributed beamforming designs are developed for a wireless multiuser multi-relay network. Two design criteria for the optimal distributed beamforming at the relays are considered: (i) minimizing the total relay power subject to a guaranteed Quality of Service (QoS) measured in terms of signal-to-noise-ratio (SNR) at the destinations, and (ii) jointly maximizing the SNR margin at the destinations subject to power constraints at the relays. Based on convex optimization techniques, it is shown that these problems can be formulated and solved via second-order conic programming (SOCP). In addition, this part also proposes simple and fast iterative algorithms to directly solve these optimization problems.

Cooperative communications have received much attention recently, due to its ability to attain cooperation diversity. But when two nodes communicate via relays, it is difficult to get the perfect channel information, so relays must estimate their forward channel and backward channel in order to amplify the data to the destination. We investigate the effect of channel estimation error, and design the LMMSE estimator to estimate the channels, and also we consider the multi-relays to assist the whole system for training and data transmission. We propose the SNR gap ratio, outage probability, and the BER simulations for the analysis. Simulation shows that when using multi-relays, it can mitigate the effect of channel estimation errors in all of the amplify-and-forward (AF) scenarios.