The communication system using Wavelength-division multiplexing (WDM) allows for better utilization of the spectral bandwidth. Photonic crystals (PhCs) exhibit photonic bandgap (PBG) due to the periodic variation of the dielectric constant and photons with a range of frequencies within the PBG cannot travel through the crystal. By introducing defects into PhCs, it is possible to control the light propagation along certain paths. In this thesis, the characteristics of coupled cavity waveguides (CCWs) and drop filter are discussed. Then we propose a multi-channel WDM system based on CCWs. It can be applied in FTTH to filter the wavelengths of 1310, 1490 and 1550 nm in different CCWs and also can make the bandwidth of output wavelength become narrow to filter more wavelengths. In addition, by modulating the size of the resonator on the PhCs, it can drop the particular wavelength into the waveguide. Finally, we proposed a multi-channel drop filter with FHWM 0.8 nm. This device design is leading the way to achieve CWDM specification with 100% drop efficiency, high quality factor and almost no crosstalk. The operations of such an ultra-compact demultiplexer and drop filter based on PhCs are suitable to be used in WDM optical communication systems.

Photonic crystals (PhCs) are periodic dielectric structures that exhibit a photonic bandgap, i.e., a range of wavelength for which light propagation is forbidden. The special band structure related dispersion properties offer a realm of novel functionalities and interesting physical phenomena. PhCs have been manufactured using semiconductors and other material technologies. However, InP-based materials are the main choice for active devices at optical communication wavelengths. This thesis focuses on two-dimensional PhCs in the InP/GaInAsP/InP material system and addresses their fabrication technology and their physical properties covering both material issues and light propagation aspects. Ar/Cl2 chemically assisted ion beam etching was used to etch the photonic crystals. The etching characteristics including feature size dependent etching phenomena were experimentally determined and the underlying etching mechanisms are explained. For the etched PhC holes, aspect ratios around 20 were achieved, with a maximum etch depth of 5 microns for a hole diameter of 300 nm. Optical losses in photonic crystal devices were addressed both in terms of vertical confinement and hole shape and depth. The work also demonstrated that dry etching has a major impact on the properties of the photonic crystal material. The surface Fermi level at the etched hole sidewalls was found to be pinned at 0.12 eV below the conduction band minimum. This is shown to have important consequences on carrier transport. It is also found that, for an InGaAsP quantum well, the surface recombination velocity increases (non-linearly) by more than one order of magnitude as the etch duration is increased, providing evidence for accumulation of sidewall damage. A model based on sputtering theory is developed to qualitatively explain the development of damage. The physics of dispersive phenomena in PhC structures is investigated experimentally and theoretically. Negative refraction was experimentally demonstrated at optical wavelengths, and applied for light focusing. Fourier optics was used to experimentally explore the issue of coupling to Bloch modes inside the PhC slab and to experimentally determine the curvature of the band structure. Finally, dispersive phenomena were used in coupled-cavity waveguides to achieve a slow light regime with a group index of more than 180 and a group velocity dispersion up to 10^7 times that of a conventional fiber. / QC 20100712

El objetivo de esta tesis es la investigación de estructuras y técnicas de acoplo para minimizar las pérdidas de acoplo entre guías dieléctricas y cristales fotónicos planares. En primer lugar se ha estudiado el modelado del acoplo entre guías dieléctricas y guías en cristal fotónico así como la influencia de los principales parámetros del cristal en la eficiencia de acoplo. Se han obtenido expresiones cerradas para las matrices de reflexión y transmisión que caracterizan totalmente el scattering que ocurre en el interfaz formado entre una guía dieléctrica y una guía en cristal fotónico. A continuación y con el fin de mejorar la eficiencia de acoplo desde guías dieléctrica de anchura arbitraria, se ha propuesto como contribución original una técnica de acoplo basada en la introducción de defectos puntuales en el interior de una estructura de acoplo tipo cuña realizada en el cristal fotónico. Diferentes soluciones, incluida los algoritmos genéticos, han sido propuestas con el objetivo de conseguir el diseño óptimo de la configuración de defectos. Una vez conseguido un acoplo eficiente desde guías dieléctricas a guías en cristal fotónico, se ha investigado el acoplo en guías de cavidades acopladas. Como contribución original se ha propuesto una técnica de acoplo basada en la variación gradual del radio de los defectos situados entre cavidades adyacentes. Además, se ha realizado un riguroso análisis en el dominio del tiempo y la frecuencia de la propagación de pulsos en guías acopladas de longitud finita. Dicho estudio ha tenido como objetivo la caracterización de la influencia de la eficiencia del acoplo en los parámetros del pulso. Finalmente, se han presentado los procesos de fabricación y resultados experimentales de las estructuras de acoplo propuestas. / Sanchis Kilders, P. (2005). Coupling techniques between dielectric waveguides and planar photonic crystals [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/1854