No description available.

With all the advancements in autonomous and connected cars, there is a developing body of research around the security and robustness of driving automation systems. Attacks and mitigations for said attacks have been explored, but almost always solely in software simulations. For this thesis, I led a team to build the foundation for an open source platoon of scale semi-autonomous vehicles. This work will enable future research into implementing theoretical attacks and mitigations. Our 1/10 scale car leverages an Nvidia Jetson, embedded microcontroller, and sensors. The Jetson manages the computer vision, networking, control logic, and overall system control; the embedded microcontroller directly controls the car. A lidar module is responsible for recording distance to the preceding car, and an inertial measurement unit records the velocity of the car itself. I wrote the software for the networking, interprocess, and serial communications, as well as the control logic and system control.

No description available.

No description available.

An embedded model predictive controller for velocity control of trucks is developed and tested. By using a simple model of a heavy duty vehicle and knowledge about the slope of the road ahead, the fuel consumption while traveling near a set speed is diminished by almost 1% on an example road compared to a rule based speed control system. The problem is formulated as a look-ahead optimization problem were fuel consumption and total trip time have to be minimized. To find the optimal solution dynamic programming is used, and the whole code is designed to run on a Scania gearbox ECU in parallel with all the current software. Simulations were executed in a Simulink environment, and two test rides were performed on the E4 motorway. / En algoritm för hastighetsstyrning baserad på modell-prediktiv reglering har utvecklats och testats på befintlig styrsystem i ett Scania lastbil. Genom att använda en enkel modell av fordonet och kunskap om lutningen på vägen framför den kunde man sänka bränsleförbrukningen med nästan 1% i vissa sträckor, jämfört med en regelbaserad farthållare. Problemet är formulerat som en optimerings-problem där bränsleförbrukning och total restid måste minimeras. För att hitta den optimala lösningen användes dynamisk programmering och hela koden är skriven så att den kan exekveras på en Scania styrenehet. Koden är kan köras parallellt med den mjukvara som är installerad på styrenheten. Simuleringar utfördes i en miljö utvecklad i Simulink. Två test-körningar på E4 motorvägen utfördes.

Traffic signals are used at intersections to manage the flow of vehicles by allocating right-of-way in a timely manner for different users of the intersection. Traffic signals are therefore installed at an intersection to improve overall safety and to decrease vehicular average delay. However, the variation of driving speed in response to these signals causes an increase in fuel consumption and air emission levels. One solution to this problem is Eco-Cooperative Adaptive Cruise Control (Eco-CACC), which attempts to reduce vehicle fuel consumption and emission levels by optimizing driver behavior in the vicinity of a signalized intersection. Various Eco-CACC algorithms have been proposed by researchers to address this issue. With the help of vehicle-to-infrastructure (V2I) and vehicle-to-vehicle (V2V) communication, algorithms are being developed that utilize signal phasing and timing (SPaT) data together with queue information to optimize vehicle trajectories in the vicinity of signalized intersections. The research presented in this thesis constitutes the third phase of a project that entailed developing and evaluating an Eco-CACC system. Its main objective is to evaluate the benefits of the newly developed Eco-CACC algorithm that was proposed by the Center for Sustainable Mobility at the Virginia Tech Transportation Institute. This algorithm uses advanced signal information (SPaT) to compute the fuel-optimal trajectory of vehicles, and, then, send recommended speeds to drivers as an audio message or implement them directly into the subject vehicle. The objective of this study is to quantitatively quantify the fuel-efficiency of the Eco-CACC system in a real field environment. In addition, another goal of this study is to address the implementation issues and challenges with the field application of the Eco-CACC system. A dataset of 2112 trips were collected as part of this research effort using a 2014 Cadillac SRX equipped with a vehicle onboard unit for (V2V) and (V2I) communication. A total of 32 participants between the ages of 18 and 30 were randomly selected from one age group (18-30) with an equal number of males and females. The controlled experiment was conducted on the Virginia Smart Road facility during daylight hours for dry pavement conditions. The controlled field experiment included four different scenarios: normal driving, driving with red indication countdown information provided to drivers, driving with recommended speed information computed by the Eco-CACC system and delivered to drivers, and finally automated driving (automated Eco-CACC system). The controlled field experiment was conducted for four values of red indication offsets along an uphill and downhill approach. The collected data were compared with regard to fuel economy and travel time over a fixed distance upstream and downstream of the intersection (820 ft (250 m) upstream of the intersection to 590 ft (180 m) downstream for a total length of 1410 ft (430 m)). The results demonstrate that the Eco-CACC system is very efficient in reducing fuel consumption levels especially when driving downhill. The field data indicates that the automated scenario could produce fuel and travel time savings of 31% and 9% on average, respectively. In addition, the study demonstrates that driving with a red indication countdown and recommended speed information can produce fuel savings ranging from 4 to 21 percent with decreases in travel times ranging between 1 and 10 percent depending on the value of red indication offset and the direction. Split-split-plot design was used to analyze the data and test significant differences between the four scenarios with regards to fuel consumption and travel time. The analysis shows that the differences between normal driving and driving with either the manual or automated Eco-CACC systems are statistically significant for all the red indication offset values. / Master of Science

Volvo Cars is working on reducing the frequency of small margin driving situation in order to reach Vision 2020; that no one should be seriously injured or killed in a new Volvo car by 2020. In this specific case, there is one main goal; to increase the usage of Adaptive Cruise Control (ACC). ACC helps the driver by setting a time interval to the vehicle ahead, adapting the vehicle’s speed according to the set time interval. When using ACC, drivers will decrease the risk of crashes related to visual distraction, where close following conditions leaves the driver with too little time to recover when a lead vehicle unexpectedly brakes. By using ACC one increases the time for action during a potential crash situation. The purpose of the thesis work is to develop and iteratively test an ACC in-vehicle usage feedback concept that is using the principles of nudging. Nudging is an idea that relates to subconsciously pushing humans in a desired behavioural direction. Also, focus was on finding the right method for evaluation using traditional Usability testing as the ground design outline method. This work is divided into three phases; Research phase, Development phase and Final Performing phase. The research phase provides the opportunity to get to know the users and their experience of using ACC. The development phase was divided into two areas; the application development and method development. The third phase was the final performance, where the developed method was applied on the final implemented concept. This work resulted in a nudging concept aiming to encourage the driver towards a more frequent ACC usage, and a developed method for measuring drivers’ behaviour and experience on the usability and satisfaction of the concept.

Genom att fusionera (sammanföra) data från olika sensorer kan ett resultat uppnås som ger mer än de enskilda sensorerna var för sig. Här utreds vilka sensorer och sensorfusionsmetoder som kan vara aktuella att använda för Scanias adaptiva farthållare (ACC). Den adaptiva farthållaren anpassar det egna fordonets hastighet inte bara till en förinställd hastighet utan även till framförvarande fordons hastighet. Scanias ACC-system använder idag en radar för måldetektering. Det finns ett antal algoritmer och arkitekturer som passar för sensorfusionssystem beroende på nivån hos sensordatan och användningsområdet. Minstakvadratmetoder kan användas då data ska matchas mot en fysisk modell, ofta med lågnivådata. När tillgänglig data är på den nivån att den används direkt för att fatta beslut kan sannolikhetsmetoder användas. Intelligent fusion består av kognitiva modeller som avser härma den mänskliga beslutsprocessen. Till detta passar data på hög nivå. Två lösningar, för två olika sensoruppsättningar, har tagits fram. Båda lösningarna är uppbyggda av bayesiska nätverk. Det första nätverket fusionerar data från den befintliga radarenheten med data från en kamera som detekterar vägmarkeringar. Resultaten visar att filbyten kan upptäckas tidigare i och med fusionen. Det andra nätverket använder sig av två radarenheter, den ursprungliga samt en likadan enhet till, vilket resulterar i ett bredare synfält. Nätverket avgör vilka mål hos respektive radar som kan anses vara samma matchade mål. Informationen kan användas för att öka redundansen i systemet samt för att upptäcka mål tidigare än förut. / By fusing data from different sensors a result can be achieved that is worth more than the data from each sensor by itself. Which sensors and sensor fusion methods that could be used in Scania's adaptive cruise control system (ACC) is investigated. The ACC system adapts the vehicle's speed not only to a driver decided set speed but also to the speed of preceding vehicles. Scania's ACC system uses a radar for target detection. There exists a number of algorithms and architectures fit for use in sensor fusion systems. Which one to use depends on the level of the data to be fused and on the field of application. Least square methods are used when matching data to a physical model, data to be used is often at a low level. When working with data at decision level, probability methods are favored. Another example is intelligent fusion, cognitive methods intending to mimic the human decision process. Suitable data is data at a high level. Two solutions, for two different sensor sets, are proposed. Both solutions are made out of Bayesian networks. The first one fuses data from the existing radar unit with data from a camera which detects lane markings. The results show that lane changes can be detected earlier thanks to the fusion. The second network uses two radar sensors of the same kind as the first, resulting in a wider field of view. The network decides which ones of each radars targets that are the same matching targets. This information could be used to increase the redundancy of the system and to detect targets earlier.

Current day VLSI systems have started seeing increasing percentages of multiple energy domain components being integrated into the mainstream. Energy domains such as mechanical, optical, fluidic etc. have become all pervasive into VLSI systems and such systems are being manufactured routinely. The framework required to design such an integrated system with diverse energy domains needs to be evolved as a part of conventional VLSI design methodology. This is because manufacturing and design of these integrated energy domains although based on semiconductor processing, is still very ad-hoc, with each device requiring its dedicated design tools and process integration. In this thesis three different approaches in different energy domains, have been pro-posed. These three domains include modelling & simulation, synthesis & compilation and formal verification. Three different scenarios have been considered and it is shown that these tasks can be co-performed along with conventional VLSI circuits and systems. In the first approach a micro-mechanical beam bending case is presented. A thermal heat ow causing the beam to bend through thermal stress is analyzed for change in capacitance under a single analysis and modelling framework. This involves a seamless analysis through thermal, mechanical and electrical energy domains. The second part of the thesis explores synthesis and compilation paradigms. The concept of a Gyro-compiler analogous to a memory compiler is proposed, which primarily generates soft IP models for various gyro topologies. The final part of this thesis deals in showcasing a working prototype of a formal verification framework for MEMS based hybrid systems. The MEMS verification domain today is largely limited to simulation based verification. Many techniques have been proposed for formal verification of hybrid systems. Some of these methods have been extended to demonstrate, how MEMS based hybrid systems can be formally verified through ex-tensions of conventional formal verification methods. An adaptive cruise control (ACC) system with a gyro based speed sensor has been analyzed and formally verified for various specifications of this system.

Optimal Control (OC) is essentially a mathematical extremal problem. The procedure consists on the definition of a criterion to minimize (or maximize), some constraints that must be fulfilled and boundary conditions or disturbances affecting to the system behavior. The OC theory supplies methods to derive a control trajectory that minimizes (or maximizes) that criterion. This dissertation addresses the application of OC to automotive control problems at the powertrain level, with emphasis on the internal combustion engine. The necessary tools are an optimization method and a mathematical representation of the powertrain. Thus, the OC theory is reviewed with a quantitative analysis of the advantages and drawbacks of the three optimization methods available in literature: dynamic programming, Pontryagin minimum principle and direct methods. Implementation algorithms for these three methods are developed and described in detail. In addition to that, an experimentally validated dynamic powertrain model is developed, comprising longitudinal vehicle dynamics, electrical motor and battery models, and a mean value engine model. OC can be utilized for three different purposes: 1. Applied control, when all boundaries can be accurately defined. The engine control is addressed with this approach assuming that a the driving cycle is known in advance, translating into a large mathematical problem. Two specific cases are studied: the management of a dual-loop EGR system, and the full control of engine actuators, namely fueling rate, SOI, EGR and VGT settings. 2. Derivation of near-optimal control rules, to be used if some disturbances are unknown. In this context, cycle-specific engine calibrations calculation, and a stochastic feedback control for power-split management in hybrid vehicles are analyzed. 3. Use of OC trajectories as a benchmark or base line to improve the system design and efficiency with an objective criterion. OC is used to optimize the heat release law of a diesel engine and to size a hybrid powertrain with a further cost analysis. OC strategies have been applied experimentally in the works related to the internal combustion engine, showing significant improvements but non-negligible difficulties, which are analyzed and discussed. The methods developed in this dissertation are general and can be extended to other criteria if appropriate models are available. / El Control Óptimo (CO) es esencialmente un problema matemático de búsqueda de extremos, consistente en la definición de un criterio a minimizar (o maximizar), restricciones que deben satisfacerse y condiciones de contorno que afectan al sistema. La teoría de CO ofrece métodos para derivar una trayectoria de control que minimiza (o maximiza) ese criterio. Esta Tesis trata la aplicación del CO en automoción, y especialmente en el motor de combustión interna. Las herramientas necesarias son un método de optimización y una representación matemática de la planta motriz. Para ello, se realiza un análisis cuantitativo de las ventajas e inconvenientes de los tres métodos de optimización existentes en la literatura: programación dinámica, principio mínimo de Pontryagin y métodos directos. Se desarrollan y describen los algoritmos para implementar estos métodos así como un modelo de planta motriz, validado experimentalmente, que incluye la dinámica longitudinal del vehículo, modelos para el motor eléctrico y las baterías, y un modelo de motor de combustión de valores medios. El CO puede utilizarse para tres objetivos distintos: 1. Control aplicado, en caso de que las condiciones de contorno estén definidas. Puede aplicarse al control del motor de combustión para un ciclo de conducción dado, traduciéndose en un problema matemático de grandes dimensiones. Se estudian dos casos particulares: la gestión de un sistema de EGR de doble lazo, y el control completo del motor, en particular de las consignas de inyección, SOI, EGR y VGT. 2. Obtención de reglas de control cuasi-óptimas, aplicables en casos en los que no todas las perturbaciones se conocen. A este respecto, se analizan el cálculo de calibraciones de motor específicas para un ciclo, y la gestión energética de un vehículo híbrido mediante un control estocástico en bucle cerrado. 3. Empleo de trayectorias de CO como comparativa o referencia para tareas de diseño y mejora, ofreciendo un criterio objetivo. La ley de combustión así como el dimensionado de una planta motriz híbrida se optimizan mediante el uso de CO. Las estrategias de CO han sido aplicadas experimentalmente en los trabajos referentes al motor de combustión, poniendo de manifiesto sus ventajas sustanciales, pero también analizando dificultades y líneas de actuación para superarlas. Los métodos desarrollados en esta Tesis Doctoral son generales y aplicables a otros criterios si se dispone de los modelos adecuados. / El Control Òptim (CO) és essencialment un problema matemàtic de cerca d'extrems, que consisteix en la definició d'un criteri a minimitzar (o maximitzar), restriccions que es deuen satisfer i condicions de contorn que afecten el sistema. La teoria de CO ofereix mètodes per a derivar una trajectòria de control que minimitza (o maximitza) aquest criteri. Aquesta Tesi tracta l'aplicació del CO en automoció i especialment al motor de combustió interna. Les ferramentes necessàries són un mètode d'optimització i una representació matemàtica de la planta motriu. Per a això, es realitza una anàlisi quantitatiu dels avantatges i inconvenients dels tres mètodes d'optimització existents a la literatura: programació dinàmica, principi mínim de Pontryagin i mètodes directes. Es desenvolupen i descriuen els algoritmes per a implementar aquests mètodes així com un model de planta motriu, validat experimentalment, que inclou la dinàmica longitudinal del vehicle, models per al motor elèctric i les bateries, i un model de motor de combustió de valors mitjans. El CO es pot utilitzar per a tres objectius diferents: 1. Control aplicat, en cas que les condicions de contorn estiguen definides. Es pot aplicar al control del motor de combustió per a un cicle de conducció particular, traduint-se en un problema matemàtic de grans dimensions. S'estudien dos casos particulars: la gestió d'un sistema d'EGR de doble llaç, i el control complet del motor, particularment de les consignes d'injecció, SOI, EGR i VGT. 2. Obtenció de regles de control quasi-òptimes, aplicables als casos on no totes les pertorbacions són conegudes. A aquest respecte, s'analitzen el càlcul de calibratges específics de motor per a un cicle, i la gestió energètica d'un vehicle híbrid mitjançant un control estocàstic en bucle tancat. 3. Utilització de trajectòries de CO com comparativa o referència per a tasques de disseny i millora, oferint un criteri objectiu. La llei de combustió així com el dimensionament d'una planta motriu híbrida s'optimitzen mitjançant l'ús de CO. Les estratègies de CO han sigut aplicades experimentalment als treballs referents al motor de combustió, manifestant els seus substancials avantatges, però també analitzant dificultats i línies d'actuació per superar-les. Els mètodes desenvolupats a aquesta Tesi Doctoral són generals i aplicables a uns altres criteris si es disposen dels models adequats. / Reig Bernad, A. (2017). Optimal Control for Automotive Powertrain Applications [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/90624 / TESIS