本論文主要從情緒解釋框架效應，由情緒管理理論（Mood management theory）、情緒壓抑效果(Dampening effect)解釋框架效應，並利用問卷驗證兩理論之正確性。情緒管理理論認為:在正向框架下，受試為了保持好心情，選擇能保持好心情的確定選項；在負向框架下，受試為了逃離負向情緒，選擇有機會沒有人損失的風險選項。而情緒壓抑效果則認為:受試會對不確定選項會有一個情緒的壓抑效果，因此在正向框架下，受試對風險選項的正向情緒較低，因此選擇確定選項；負向框架下，受試對風險選項的負向情緒較低，因此選擇風險選項。另外，對於過去文獻中顯現人們對亞洲疾病問題比賭局問題要來的風險追逐的現象，情緒管理理論比情緒壓抑效果更能由情緒的角度提供解釋。情緒管理理論預期受試面對賭局問題比亞洲疾病問題，在正向框架下的正向情緒較高，在負向框架下的負向情緒較低。情緒壓抑效果預期受試在正向框架下，對於確定選項有較高的正向情緒，因此選擇確定選項；面對負向框架，對於不確定選項有較低的負向情緒，因此選擇不確定選項。本文採用問卷的方式，在實驗一與實驗二中，對於上述的理論作檢驗，結果支持情緒管理理論的預測，情緒壓抑效果僅獲得部分支持。本文除了對於過去框架效應的相關文章作一統整外，對於框架效應的發生提供一個情緒解釋基礎，並使用情緒管理理論驗證並支持之。

It was investigated characteristics of surfaces of offset printing plates. A method of measurement of wetting angle was improved and there were investigated the wetting characteristics of hydrophilic surfaces of offset printing plates and their dependence on dampening solution and on printed run. Experimentally investigated 16 offset printing plates. Wetting angle increases with the run. Surface roughness was investigated using profilograph. Changes of surface roughness during printing were determined and it was found that during printing quantity of bigger over 1 µm irregularities increases.

An algorithm is presented which computes a state feedback for a standard linear system which not only stabilizes, but also dampens the closed-loop system dynamics. In other words, a feedback gain vector is computed such that the eigenvalues of the closed-loop state matrix are within the region of the left half-plane where the magnitude of the real part of each eigenvalue is greater than the imaginary part. This may be accomplished by solving one periodic algebraic Riccati equation and one degenerate Riccati equation. The solution to these equations are computed using numerically robust algorithms. Finally, the periodic Riccati equation is unusual in that it produces one symmetric and one skew symmetric solution, and as a result two different state feedbacks. Both feedbacks dampen the system dynamics, but produce different closed-loop eigenvalues, giving the controller designer greater freedom in choosing a desired feedback.

Veckbildning i bitumenbaserade tätskiktmattor är ett problem som är känt i branschen. Problemet uppstår oftast på underlagstak av trä som är byggda under årets fuktigaste period, oktober-november, och vecken börjar då att bildas i slutet av våren i takt med den ökande solinstrålningen. Vecken bildas när underlagstaket torkar ut och krymper, det leder till att tätskiktets infästningspunkter skjuts ihop och ett materialöverskott av tätskiktsmatta bildas – ett tillräckligt stort materialöverskott visar sig i form av ett veck. Idag kan veckbildningen leda till att tätskiktsmattor måste bytas ut av estetiska skäl. Denna rapport utreder vilka faktorer som påverkar risken för veckbildning. Rörelser i både trä och tätskikt har studerats. Träets rörelser är direkt beroende av dess fuktkvot, när träet torkar ut krymper det också. För att utreda de faktorer som påverkar träets fuktighet har fuktberäknings-programmet WUFI använts. WUFI har nyttjats för att göra en parameterstudie där olika parametrar har jämförts, till exempel: platser i landet, inbyggnadsfuktkvoter, tidpunkter för inbyggnad etc. Till skillnad från de flesta andra material krymper bitumenbaserade tätskikt initialt till följd av uppvärmning från solen. Hur träet och tätskiktet påverkar varandra till följd av deras inbördes rörelser har utretts i form av en hypotes. Antagandet utgår från att tätskiktets mekaniska infästningspunkter i underlagstaket är en viktig del - ju kortare avstånd mellan infästningspunkterna, desto högre är risken för veckbildning. Beräkningar, utifrån antagandet, har gjorts för att kunna jämföra olika utföranden med varandra. Faktorer som leder till minskad risk för veckbildning är att minska fuktkvotsändringen och därmed fuktrörelserna genom att bygga tak med så låg inbyggnadsfuktkvot som möjligt, till exempel genom att bygga under våren/sommaren. Vid byggnation under höst/vinter kan fuktkvoten hållas nere med en avfuktare. Att använda takplywood i stället för råspont leder till minskade rörelser i underlagstaket. En annan åtgärd som skulle minska risken för veckbildning är att öka den maximalt tillåtna krympningen i tätskiktet. / Creasing in roofing membranes is a problem that is familiar in the industry. The issue usually occurs on wooden roof deckings constructed during the wettest period of the year, October-November. The creases then begin to form at the end of the spring due to the increasing solar radiation. When the roof decking dries out and shrinks, the creases start to form. The shrinking leads to the attachment points of the roofing membrane getting pushed together. That creates an excess of material - a sufficiently large surplus of material appears in the form of a crease. Today, the formation of creases can lead to roofing membranes having to get replaced for aesthetic reasons. This report investigates the factors that affect the risk of creasing. Both the movement in the wood and the roofing membrane have been examined. The wood's motions are directly dependent on its moisture content. When the wood is drying, it's also shrinking. The moisture calculation program WUFI has been used to investigate the factors that affect the wood's moisture. The investigation is in the form of a parameter study where different parameters have been compared, for example, places in the country, built-in moisture ratios, built-in times, and more. Unlike most other materials, bituminous roofing membranes initially shrink due to heating from the sun. How the wood and the roofing membrane affect each other as a result of their respective movements has been investigated in the form of a hypothesis. It assumes that the mechanical attachment points of the roofing membrane in the roof decking are of importance - the shorter the distance between the attachment points, the higher the risk of creases. Calculations, based on the assumption, have been made to compare different roofing components with each other. Factors that lead to a reduced risk of creasing are to reduce the moisture ratio change and thus the moisture movements by building roofs with as low a built-in moisture ratio as possible, for example, by constructing in the spring/summer. When constructing during autumn/winter, the moisture ratio can be kept down with a dehumidifier. Using roof plywood instead of tongued and grooved board leads to reduced movements in the roof decking. Another measure that would reduce the risk of creasing is to increase the maximum allowable shrinkage in the roofing membrane.

The desire to enhance and make ourselves better is not a new one and it has continued to intrigue throughout the ages. Individuals have continued to seek ways to improve and enhance their well-being for example through nutrition, physical exercise, education and so on. Crucial to this improvement of their well-being is improving their ability to remember. Hence, people interested in improving their well-being, are often interested in memory as well. The rationale being that memory is crucial to our well-being. The desire to improve one’s memory then is almost certainly as old as the desire to improve one’s well-being. Traditionally, people have used different means in an attempt to enhance their memories: for example in learning through storytelling, studying, and apprenticeship. In remembering through practices like mnemonics, repetition, singing, and drumming. In retaining, storing and consolidating memories through nutrition and stimulants like coffee to help keep awake; and by external aids like notepads and computers. In forgetting through rituals and rites. Recent scientific advances in biotechnology, nanotechnology, molecular biology, neuroscience, and information technologies, present a wide variety of technologies to enhance many different aspects of human functioning. Thus, some commentators have identified human enhancement as central and one of the most fascinating subject in bioethics in the last two decades. Within, this period, most of the commentators have addressed the Ethical, Social, Legal and Policy (ESLP) issues in human enhancements as a whole as opposed to specific enhancements. However, this is problematic and recently various commentators have found this to be deficient and called for a contextualized case-by-case analysis to human enhancements for example genetic enhancement, moral enhancement, and in my case memory enhancement (ME). The rationale being that the reasons for accepting/rejecting a particular enhancement vary depending on the enhancement itself. Given this enormous variation, moral and legal generalizations about all enhancement processes and technologies are unwise and they should instead be evaluated individually. Taking this as a point of departure, this research will focus specifically on making a case for ME and in doing so assessing the ESLP implications arising from ME. My analysis will draw on the already existing literature for and against enhancement, especially in part two of this thesis; but it will be novel in providing a much more in-depth analysis of ME. From this perspective, I will contribute to the ME debate through two reviews that address the question how we enhance the memory, and through four original papers discussed in part three of this thesis, where I examine and evaluate critically specific ESLP issues that arise with the use of ME. In the conclusion, I will amalgamate all my contribution to the ME debate and suggest the future direction for the ME debate.