Spelling suggestions: "subject:"egrees off freedom"" "subject:"egrees oof freedom""
31 |
Konceptuell konstruktion av en koppling för mekanisk bergavverkningsmaskin. / Conceptual Design of a Joint for a Mechanical Rock Excavation Machine.Erkers, Johan, Ekroth, Peter January 2019 (has links)
Examensarbetet har skett inom mastersprogrammet Maskinkonstruktion på KTH. Arbetet gjorde tillsammans med Epiroc genom Svea Teknik AB. I dagens gruvarbete använder nästan alla borr- och sprängteknik, men det finns stora problem med detta. Epiroc har börjat utveckla så kallade Mobile Miners, som är konstruerade för att bryta malm utan borr- och sprängteknik. Maskinen ska ha möjlighet att göra alla processer i samma maskin istället för borr- och sprängtekniken, där maskiner byts beroende på process. Den nya tekniken använder sig av ett skärhjul för att utvinna malm. En av maskinerna Epiroc har konstruerat är Mobile Miner 40 V. Maskinen har två moduler, drivmodulen, där alla typ av drivning som hydraulpumpar är placerade och avverkningsmodulen, där skärhjulet sitter. Från tidigare versioner av Mobile Miner har det upptäckts, att det blir väldigt stora vibrationer i operatörshytten, som sitter på drivmodulen. För den nya 40 V skall kopplingen mellan modulerna kunna kopplas isär vid avverking. Dagens koncept är likt en dragkrok, som tillåter rotation i tre frihetsgrader, vilket är något som nu anses vara en risk på grund av sämre stabilitet. De tre olika leden är gir-, roll-, och tipp-led och det är roll-led som inte är önskat då 40 V är väldigt hög relativt sin bredd, vilket ger en ökad risk för tippning. Syftet med detta examensarbete var att utveckla nya stabilare koncept. Utifrån detta gjordes en parameteranalys för att definiera vad en stabilare koppling är. Nya koncept generades och dessa evaluerades med hjälp av en Pughs matris. Två koncept valdes att vidareutvecklas utifrån de givna kraven. Koncept A har låsning i tipp-led med hjälp av en krokkonstruktion, där rotationsaxlarna är separerade samtidigt som koncept B har låsningen i gir-led med hjälp av två hydrauliska cylindrar där rotationsaxlarna skär varandra likt en kardanknut. Med två frihetsgrader utsätts kopplingen för högre laster. Dimensioneringen skedde utifrån det värsta lastfallet, vilket är när avverkningsmodul kör över ett gupp och tvingar med drivmodulen. De två nya koncepten blev stabilare enligt parameteranalysen, men är något större än dagens koncept. / This Master Thesis has been done within the Master's program in Machine Design at KTH. The work was carried out together with Epiroc through Svea Teknik AB. Today almost all mining uses drill and blast techniques, but there are major problems with this. Epiroc has started to design a so-called Mobile Miners, which are designed to excavate ore without drill and blast technology. The machine should be able to do all processes in the same operation instead of the drill and blast technology where different machines are used depending on the process. The new process uses only a cutting wheel to excavate ore. One of the machines Epiroc has designed is the Mobile Miner 40 V. The machine has two modules, the power module where all types of power supply, such as hydraulic, pumps are located and then the mining module where the cutting wheel is located. From other Mobile Miner it has been discovered that there will be very large amount of vibrations in the operator cabin, which is located on the power module, so for the new 40 V the idea is that the coupling between the modules can be disconnected while operating. The current concept is similar to a towbar that allows rotation in three degrees of freedom, which is something that was later considered a risk. The three different axes are yaw, roll, and pitch axis and it is roll axis which is not desired since 40 V is very high relative to its width, which gives a risk of tipping. The purpose of this Master Thesis were to develop a more stable concept. Based on this, a parameter analysis was made to define what a more stable coupling is. New concepts were generated and then evaluated using a Pugh's matrix. Two concepts were chosen to be further developed based on the given requirements. Concept A has the locking procedure in pitch axis with the aid of a hook construction where the rotation axes are separated meanwhile in concept B has the locking procedure in the yaw axis with the help of two hydraulic cylinders where the rotation axes intersect each other like a universal joint. With two degrees of freedom, higher forces are transmitted. The dimensioning was based on the worst load case, which is when the mining module runs over a bump and carry the power module. The two new concepts became more stable according to the parameter analysis, but are somewhat bigger than the current concept.
|
32 |
Nonlinear Stabilization And Control Of Medium Range Surface To Air Interceptor MissilesSnyder, Mark 01 January 2009 (has links)
Nonlinear stabilization and control autopilots are capable of sustaining nominal performance throughout the entire fight envelope an interceptor missile may encounter during hostile engagements and require no gain scheduling to maintain autopilot stability. Due to non minimum phase conditions characteristic of tail controlled missile airframes, a separation of time scales within the dynamic equations of motion between rotational and translational differential equations was enforced to overcome unstable effects of non minimum phase. Dynamic inversion techniques are then applied to derive linearizing equations which, when injected forward into the plant result in a fully controllable linear system. Objectives of the two time scale control architecture are to stabilize vehicle rotational rates while at the same time controlling acceleration within the lateral plane of the vehicle under rapidly increasing dynamic pressure. Full 6 degree of freedom dynamic terms including all coriolis accelerations due to translational and rotational dynamic coupling have been taken into account in the inversion process. The result is a very stable, nonlinear autopilot with fixed control gains fully capable of stable nonlinear missile control. Several actuator systems were also designed to explore the destabilizing effects second order nonlinear actuator characteristics can have on nonlinear autopilot designs.
|
33 |
Analysis of a Thin-Walled Curved Rectangular Beam with Five Degrees of FreedomMoghal, Khurram Zeshan 13 December 2003 (has links)
A study of a thin-walled curved rectangular box beam under torsion and out-of-plane bending is documented in this thesis. A new one-dimensional theory that takes into account warping and distortion in the beam cross-sections is the main focus. Existing available theories for thin-walled curved beams lack rigorous theoretical development, and most have ignored the effects of warping and distortion. A higher order theory including two additional degrees of freedom corresponding to warping and distortion was derived. The conventional three degrees of freedom model was compared with the new five degrees of freedom model. The variation of beam thickness to control and decrease the high distortion variable is investigated.
|
34 |
Is my musculoskeletal model complex enough? The implications of six degree of freedom lower limb joints for dynamic consistency and biomechanical relevancePearl, Owen Douglas January 2020 (has links)
Studies have shown that modeling errors due to unaccounted for soft-tissue deformations – known as soft-tissue artifact (STA) – can reduce the efficacy and usefulness of musculoskeletal simulations. Recent work has proven that adding degrees of freedom (DOF) to the joint definitions of a musculoskeletal model’s lower limbs can significantly change the prediction of an individual’s kinematics and dynamics while simultaneously improving estimates of their mechanical work. This indicates that additional modeling complexity may mitigate the effects of STA. However, it remains to be determined whether adding DOF to the lower limb joints can impact a model’s satisfaction of Newton’s Second Law of Motion, or whether a specific number of DOF must be incorporated in order to produce the most biomechanically accurate simulations. To investigate these unknowns, I recruited ten subjects of variable body-mass-indices (BMI) and recorded subject walking data at three speeds normalized by Froude number (Fr) using optical motion capture and an instrumented treadmill (eight male, two females; mean ± s.d.; age 21.6 ± 2.87 years; BMI 25.1 ± 5.1). Then, I added DOF to the lower limb joints of OpenSim’s 23 DOF lower body and torso model until it minimized the magnitude of the pelvis residual forces and moments for a single, representative subject trial (BMI = 24.0, Fr = 0.15). These artificial residual forces and moments are applied at the pelvis to maintain the model’s orientation in space by satisfying Newton’s Second Law. Finally, I simulated all 30 trials with both the original and the edited model and observed how the biomechanical predictions of the two models differed over the range of subject BMIs and walking speeds. After applying both the original and the edited model to the entire data set, I found that the edited model resulted in statistically lower (α = 0.05) residual forces and moments in four of the six directions. Then, after investigating the impact of changes in BMI and Froude number on these residual reductions, I found that two of the six directions exhibited statistically significant correlations with Froude number while none of the six possessed correlations with BMI. Therefore, adding DOF to the lower limb joints can improve a model’s dynamic consistency and combat the effects of STA, and simulations of higher speed behaviors may benefit more from additional DOF. For BMI, it remains to be determined if a higher BMI indicates greater potential for residual reduction, but it was shown that this method of tuning the model for one representative subject was agnostic to BMI. Overall, the method of tuning the model for one representative subject was found to be quite limited. There were multiple subject trials for which reduced residuals corresponded to drastic changes in kinematic and dynamic estimates until they were no longer representative of normal human walking. Therefore, it is possible to improve dynamic consistency by adding DOF to the lower limb joints. But, for biomechanically relevant estimates to be consistently preserved and soft-tissue artifact to be completely minimized, subject-specific model tuning is likely necessary. / Mechanical Engineering
|
35 |
Distribution of Essential Tremor in the Degrees of Freedom of the Upper LimbPigg, Charles Charles 01 September 2017 (has links)
This study seeks to understand upper limb tremor in subjects with essential tremor (ET). A thorough understanding of tremor distribution will allow for the more effective development of tremor suppression devices, which offer an alternative to current treatments. Previous studies primarily focused on tremor in the hand only. This study seeks to characterize the distribution of tremor throughout the upper limb. We measured tremor in 25 subjects diagnosed with ET using motion capture, which provided 0displacement information of the limb during multiple postural and kinetic tasks. Inverse kinematics allowed us to analyze the motion capture data in the 7 major degrees of freedom (DOF) of the upper limb. The power spectral density estimate was used to determine: relative tremor magnitude throughout the DOFs, tremor variation between tasks, variation between subjects, and frequency variations between DOFs. Data analysis revealed that tremor increase is roughly proximal to distal. We also show that tremor magnitude in kinetic tasks is significantly higher than in postural tasks. Although we found some variation in tremor distribution between subjects, the roughly proximal to distal increase in tremor severity holds for several subsets of the study population. Finally, we found that tremor frequency doesnt vary significantly (<<> 1 Hz) between DOFs, in subjects with severe tremor. Our study shows that tremor distribution is quite stereotyped between subjects with ET. Furthermore, we have shown that tremor is greatest in the distal DOFs. This provides a compelling starting point for the development of future tremor suppression devices.
|
36 |
Projeto de um manipulador robótico cilíndrico de cinco eixos atuado por motores de passoSilveira, Iago Camargo January 2018 (has links)
Este trabalho contempla o projeto de um manipulador robótico cilindro atuado por motores de passo com cinco juntas de atuação. As etapas do projeto do robô, que tratam este estudo, foram divididas em: projeto mecânico; modelagem matemática; projeto do controlador; e simulações. O projeto mecânico apresenta uma proposta de configuração e dimensionamento mecânicos que supre a demanda exigida para a operação analisada. O modelo matemático apresenta as características elétricas e mecânicas do atuador e as características mecânicas do robô. O projeto de um controlador linear é realizado por meio da alocação dos polos do sistema em malha fechada através da realimentação dos estados de posição e de velocidade angulares do rotor unidos a um integrador do erro de posição angular. Para o primeiro grau de liberdade, por conta da variação do momento de inércia de massa associado a essa junta, um controlador com ganhos parametrizados foi projetado, no qual os ganhos são calculados baseado no modelo matemático relativo ao momento de inércia de massa associado a essa junta. Por meio de simulações computacionais, avaliou-se o projeto dos controladores no movimento ponto a ponto dos cinco eixos de atuação e a variação do momento de inércia de massa sobre a primeira junta. Os resultados dessas simulações mostraram que os controladores propostos cumprem com a dinâmica desejada nos cinco graus de liberdade do robô. / This work contemplates the design of a robotic manipulator, which is operated by a stepper motor with five actuation joints. The robot design steps were divided into: mechanical design; mathematical modeling; controller design; and simulations. The mechanical design presents a proposal of mechanical configuration and sizing that supplies the required demand for the analyzed operation. The mathematical model presents the electrical and mechanical characteristics of the actuator and the mechanical characteristics of the robot. The design of a linear controller is accomplished by allocating the poles of the closed loop system by states feedback of the position and angular speed of the rotor attached to an angular position error integrator. For the first degree of freedom, due to the variation of mass moment of inertia associated with this joint, a controller with parameterized gains was projected, in which the gains are calculated based on the mathematical model related to the mass moment of inertia associated to this joint. By means of computational simulations, we evaluated the design of the controllers in the point-to-point movement of the five actuation joints and the variation of the mass moment of inertia on the first joint. The results of these simulations showed that the proposed controllers comply with the desired dynamics in the robot’s five degrees of freedom.
|
37 |
Comparison of electricity production between semi-submersible and spar-buoy floating offshore wind turbinesSaracevic, Nermina January 2018 (has links)
The paper compares electricity production between the semi-submersible and the spar-buoy floating wind turbine systems under normal, stochastic and extreme wind conditions at Utsira Nord site located on the Norwegian continental shelf in the North Sea. The analysis of complex behavior of the floating wind turbine system and the fluid-structure interaction is performed in aero-servo-hydro-elastic code ASHES. The results indicate a slightly better energy performance of the semi-submersible than the spar in all load cases but one. The pitch and heave degrees of freedom are evaluated as the most relevant for the power output. It is shown that pitch and heave platform motions have smaller displacement in the semi-submersible floater than in the spar under average environmental conditions and at the rated wind speed operating range. The simulation also confirmed that the energy yield is very sensitive to the magnitude of the loads: the spar performed best under mild environmental conditions, while the semi-submersible was better under medium environmental conditions. Small difference in energy yield is attributed to the same baseline blade and external controller properties used for both floaters where generator torque was kept constant to limit the power excursions above the rated power. The method proposed under this paper has demonstrated that a good approximation of the energy performance of the floating wind turbine system can be performed in a fast and effective manner.
|
38 |
3D Navigation for Real-Time MRI using Six Degree of Freedom Interaction DevicesGardström, Karin January 2003 (has links)
<p>Real-time MRI scanning is used to visualize tissue and organs in motion. The real-time approach requires new interaction techniques to facilitate interaction with the scanning plane. The aim of this thesis is to investigate the use of input with six degrees of freedom – 6DOF. An overview over existing 6DOF input devices is given. Three devices are chosen for implementation and evaluation, Flock of Birds, SpaceBall and SpaceMouse. </p><p>A simulator application is developed to test the different input devices. The simulator purpose is to imitate the real-time scanning situation. To be able to evaluate speed andaccuracy of the different interaction techniques, methods for measuring time and error are developed. A statistical survey is done on two different tasks to gather data of the interaction. The data is analyzed and the result is that the test subjects find the SpaceMouse superior to the other devices thanks to its kinesthetic feed-back properties and ergonomic benefits. However, the statistical data shows that Flock of Birds is the fastest device and no great difference is showed in accuracy between Flock of Birds and SpaceMouse. SpaceBall was the device that generated the least satisfying data.</p>
|
39 |
Haptic Milling Simulation in Six Degrees-of-Freedom : With Application to Surgery in Stiff TissueEriksson, Magnus G. January 2012 (has links)
The research presented in this thesis describes a substantial part of the design of a prototypical surgical training simulator. The results are intended to be applied in future simulators used to educate and train surgeons for bone milling operations. In earlier work we have developed a haptic bone milling surgery simulator prototype based on three degrees-of-freedom force feedback. The contributions presented here constitute an extension to that work by further developing the haptic algorithms to enable six degrees-of-freedom (6-DOF) haptic feedback. Such feedback is crucial for a realistic haptic experience when interacting in a more complex virtual environment, particularly in milling applications.The main contributions of this thesis are:The developed 6-DOF haptic algorithm is based on the work done by Barbic and James, but differs in that the algorithm is modified and optimized for milling applications. The new algorithm handles the challenging problem of real-time rendering of volume data changes due to material removal, while fulfilling the requirements on stability and smoothness of the kind of haptic applications that we approach. The material removal algorithm and the graphic rendering presented here are based on the earlier research. The new 6-DOF haptic milling algorithm is characterized by voxel-based collision detection, penalty-based and constraint-based haptic feedback, and by using a virtual coupling for stable interaction.Milling a hole in an object in the virtual environment or dragging the virtual tool along the surface of a virtual object shall generate realistic contact force and torque in the correct directions. These are important requirements for a bone milling simulator to be used as a future training tool in the curriculum of surgeons. The goal of this thesis is to present and state the quality of a newly developed 6-DOF haptic milling algorithm. The quality of the algorithm is confirmed through a verification test and a face validity study performed in collaboration with the Division of Orthopedics at the Karolinska University Hospital. In a simulator prototype, the haptic algorithm is implemented together with a new 6-DOF haptic device based on parallel kinematics. This device is developed with workspace, transparency and stiffness characteristics specifically adapted to the particular procedure. This thesis is focuses on the 6-DOF haptic algorithm. / QC 20120226
|
40 |
Electromagnetic-Theoretic Analysis and Design of MIMO Antenna SystemsMohajer Jasebi, Mehrbod January 2011 (has links)
Multiple-Input Multiple-Output (MIMO) systems are a pivotal solution for the significant enhancement of the band-limited wireless channels’ communication capacity. MIMO system is essentially a wireless system with multiple antennas at both the transmitter and receiver ends. Compared to the conventional wireless systems, the main advantages of the MIMO systems are the higher system capacity, more bit rates, more link reliability, and wider coverage area. All of these features are currently considered as crucial performance requirements in wireless communications. Additionally, the emerging new services in wireless applications have created a great motivation to utilize the MIMO systems to fulfil the demands these applications create. The MIMO systems can be combined with other intelligent techniques to achieve these benefits by employing a higher spectral efficiency.
The MIMO system design is a multifaceted problem which needs both antenna considerations and baseband signal processing. The performance of the MIMO systems depends on the cross-correlation coefficients between the transmitted/received signals by different antenna elements. Therefore, the Electromagnetic (EM) characteristics of the antenna elements and wireless environment can significantly affect the MIMO system performance. Hence, it is important to include the EM properties of the antenna elements and the physical environment in the MIMO system design and optimizations.
In this research, the MIMO system model and system performance are introduced, and the optimum MIMO antenna system is investigated and developed by considering the electromagnetic aspects within three inter-related topics:
1) Fast Numerical Analysis and Optimization of the MIMO Antenna Structures:
An efficient and fast optimization method is proposed based on the reciprocity theorem along with the method of moment analysis to minimize the correlation among the received/transmitted signals in MIMO systems. In this method, the effects of the radio package (enclosure) on the MIMO system performance are also included. The proposed optimization method is used in a few practical examples to find the optimal positions and orientations of the antenna elements on the system enclosure in order to minimize the cross-correlation coefficients, leading to an efficient MIMO operation.
2) Analytical Electromagnetic-Theoretic Model for the MIMO Antenna Design:
The first requirement for the MIMO antennas is to obtain orthogonal radiation modes in order to achieve uncorrelated signals. Since the Spherical Vector Waves (SVW) form a complete set of orthogonal Eigen-vector functions for the radiated electromagnetic fields, an analytical method based on the SVW approach is developed to excite the orthogonal SVWs to be used as the various orthogonal modes of the MIMO antenna systems. The analytic SVW approach is used to design spherical antennas and to investigate the orthogonality of the radiation modes in the planar antenna structures.
3) Systematic SVW Methodology for the MIMO Antenna Design:
Based on the spherical vector waves, a generalized systematic method is proposed for the MIMO antenna design and analysis. The newly developed methodology not only leads to a systematic approach for designing MIMO antennas, but can also be used to determine the fundamental limits and degrees of freedom for designing the optimal antenna elements in terms of the given practical restrictions. The proposed method includes the EM aspects of the antenna elements and the physical environment in the MIMO antenna system, which will provide a general guideline for obtaining the optimal current sources to achieve the orthogonal MIMO modes. The proposed methodology can be employed for any arbitrary physical environment and multi-antenna structures. Without the loss of generality, the SVW approach is employed to design and analyze a few practical examples to show how effective it can be used for MIMO applications.
In conclusion, this research addresses the electromagnetic aspects of the antenna analysis, design, and optimization for MIMO applications in a rigorous and systematic manner. Developing such a design and analysis tool significantly contributes to the advancement of high-data-rate wireless communication and to the realistic evaluation of the MIMO antenna system performance by a robust scientifically-based design methodology.
|
Page generated in 0.0636 seconds